Innogen Tech Private Limited

Measurement Performance
The EE600 is available with full scale (FS) 1,000 Pa (4 inch Water Column) and 10,000 Pa (40 inch WC) and offers an outstanding accuracy of ± 0.5 % FS. For the versions with analogue outputs, several measuring ranges are selectable with DIP-switches. The piezo-resistive pressure sensing element ensures highly accurate and long-term stable measurements.

Analogue and Digital Outputs
The measured data is available on the analogue voltage and current outputs or on the RS485 interface with Modbus RTU or BACnet MS/TP protocol.

Functional and Robust
The IP65 / NEMA 4 enclosure minimizes installation costs. External mounting holes allow for installation with closed cover, the electronics are thus protected against construction site pollution.

Configurable and Adjustable
The setup and adjustment can be easily performed with DIP-switches and push buttons on the electronics board (EE600 with analogue outputs) or with an optional adapter and the free EE-PCS configuration software (EE600 with RS485 interface). The setup includes pressure range, output signal, response time, display units and backlight. Beside differential pressure measurement, the EE600 can be set up for volume flow or air velocity measurement, as well as for filter monitoring or level indication.

Measuring Performance
The EE610 offers ± 0.5 Pa accuracy over the entire measurement range. For the versions with analogue outputs, the EE610 offers selectable measuring ranges of ± 25 / ± 50 / ± 100 Pa and 0...100 Pa. The long-term stable, piezo-resistive no-flow-through pressure sensing element excludes the risk of cross-contamination.

Analogue and Digital Output
The measured data is available on the analogue voltage and current outputs or on the RS485 interface with Modbus RTU or BACnet MS/TP protocol.

Functional and Robust
The IP65 / NEMA 4 enclosure facilitates easy mounting and minimizes installation costs. External mounting holes allow installation with closed cover.

Configurable and Adjustable
The setup and adjustment can be easily performed with DIP-switches and push buttons on the electronics board (EE610 with analogue outputs) or with an optional adapter and the free EE-PCS configuration software (EE610 with RS485 interface). The setup includes bidirectional or unidirectional pressure range, output signal, response time, display units and backlight. A zero and span point adjustment can be easily performed with push buttons on the electronics board.