X
View Mobile Number 40% Response Rate

Our Products

+View All

Hydraulic Pumps

Delivering exceptional functionality and durability, Parker’s extensive line of hydraulic pumps deliver ideal performance in even the most demanding industrial and mobile applications. Parker’s comprehensive line includes gear pumps, piston and vane pumps, gold cup hydro-static transmission pumps and flow dividers and intensifiers.

PARKER Small Frame Variable Displacement Bent Axis Motor
Interested in this product?
Get Best Quote
PARKER Small Frame Variable Displacement Bent Axis Motor:

Series V12 is a bent-axis, variable displacement motor. It is intended for both open and closed circuits, mainly in mobile applications, but the V12 can also be utilized in a wide variety of other applications.

View Complete Details

Yes, I am interested!

PARKER Hydraulic Gerotor Motor
Interested in this product?
Get Best Quote
PARKER Hydraulic Gerotor Motor:

Features:

- Displacement: 45 to 960 cc/Rev.
- Torque: 1490 Nm,
- Speed: 940 min-1.
- Pressure: 280 bar.
- Performance: 33 Kw.
- Side Loads: 30000 N.

Low Speed Hydraulic Gerotor Motors 

View Complete Details

Yes, I am interested!

PARKER Load Sensing Truck Hydraulic Pump
Interested in this product?
Get Best Quote

PARKER Load Sensing Truck Hydraulic Pump:

The VP1 is the world's first variable displacement pump for truck applications. It can be close-coupled to a gearbox PTO (power take-off) or to a coupling independent PTO (e.g. an engine PTO) which meets ISO standard 7653-1985.

Features:

•Variable displacement .
•Low noise level .
•High power-to-weight ratio .
•Compact and lightweight .
•Highly efficient .
•Withstands low temperatures.

View Complete Details

Yes, I am interested!

PARKER Fixed Displacement Bent Axis Truck Pumps & Motors
Interested in this product?
Get Best Quote
PARKER Fixed Displacement Bent Axis Truck Pumps & Motors:

The F1 offers many additional values for operators of cargo cranes, hook loaders,
skip loaders, forest cranes and heavy duty demanding truck applications.

Features:

Higher selfpriming speed. 
Operating pressures to 400 bar. 
New frame sizes to meet market requirements. 
Higher overall efficiency. 
Increased reliability. 
Reduced noise level. 
Smaller installation dimensions.

View Complete Details

Yes, I am interested!

  • PARKER Fixed Displacement Bent Axis Truck Pump & Motor
  • PARKER Fixed Displacement Bent Axis Truck Pump & Motor
PARKER Fixed Displacement Bent Axis Truck Pump & Motor
Interested in this product?
Get Best Quote
PARKER Fixed Displacement Bent Axis Truck Pump & Motor:

The F1 offers many additional values for operators of cargo cranes, hook loaders, skip loaders, forest cranes and heavy duty demanding truck applications.
Higher selfpriming speed.
Operating pressures to 400 bar.
New frame sizes to meet market requirements.
Higher overall efficiency.
Increased reliability .
Reduced noise level.
Smaller installation dimensions.

Series F2 is a further development of the twin-flow version of Series F1, the very first bent-axis truck pump on the market with two entirely independent flows. Typical applications include large truck loaders, forestry cranes, hook loaders, refuse collecting vehicles, concrete mixers and tipper/crane combinations.
Less energy consumption.
Reduced risk of system overheating.
Lower weight.
Smart system solution means easier installation.
High overall system efficiency.

View Complete Details

Yes, I am interested!

PARKER Variable Displacement Axial Piston Pump
Interested in this product?
Get Best Quote

PARKER Variable Displacement Axial Piston Pump:

Models P2 and P3:

P2 and P3 are the Parker solution for a wide variety of mobile light-heavy duty applications.
•A flexible concept and special market-driven design make installation and service easy and cost-effective .
•Due to optimized housing and the unique ripple chamber hydraulic and airborne pump noise are at a very low level .
•Pro E optimized ports, advanced configuration of the valve plate and a proven swash angle provide a high self priming speed Like all PMD products the pumps are designed and tested together with Parker valves and adapted to the respective requirements of the system.

PARKER Variable Displacement Axial Piston Pump:

Models P1 and PD:
The Parker P1 / PD medium duty pump has been developed to cover the mobile (P1) as well as the industrial (PD) market when it comes to medium duty applications.
•P1 / PD has a 3D CAD based, computer optimized design that leads to a considerable reduction of noise .
•Due to minimized size and weight as well as an adapted compensator design installation is very easy .
•The pump shows high overall efficiency and wide operating temperature capability The currently available range will be successively extended by new displacement and compensator options in the future.

View Complete Details

Yes, I am interested!

  • PARKER High Pressure Industrial Piston Pump
  • PARKER High Pressure Industrial Piston Pump
PARKER High Pressure Industrial Piston Pump
Interested in this product?
Get Best Quote

PARKER High Pressure Industrial Piston Pump:

PVplus is our Heavy-Duty Piston Pump line for demanding industrial applications. It is available in displacements from 16-360cc for operating pressure up to 420 Bar.


Small Frame Fixed Displacement Bent Axis Pumps & Motor:

• Compact and Service-friendly design with flexible mounting interface.
• Quiet operation.
• High operating efficiency for lower power consumption and reduced heat generation.
• Simple hydraulic controls with "no-leak" adjustments .
• Shaft speed up to 3000 rpm .
• Operating pressure up to 420 Bar .
• High self-priming speed capabilities .
• FEM optimized housing and precompression chamber results in low output pulsation and less noise to insulate .
• Modular compensators with fast response.

View Complete Details

Yes, I am interested!

  • PARKER Gold Cup Piston Pump And Motor
  • PARKER Gold Cup Piston Pump And Motor
PARKER Gold Cup Piston Pump And Motor
Interested in this product?
Get Best Quote

PARKER Gold Cup Piston Pump And Motor:

Parker GOLD CUP series of hydrostatic piston pumps and motors delivers exceptional, longlasting performance in severe duty applications. Featuring a robust barrel bearing design, GOLD CUP pumps and motors provide circuit reliability at speeds up to 3600 rpm at 5000 psi continuous pressure or 6000 psi intermittent pressure.

A closed circuit design makes GOLD CUP series pumps and motors ideal for bi-directional function and eliminates energy losses associated with circuit valving. The GOLD CUP’s high power-to-weight ratio, compact package, and flexibility in control options and mounting locations deliver significant value-added benefits. These include lower operating costs, ease of installation with fewer components, and longevity for reduced down-time.

Increased productivity and reduced power:
• High-speed operation.
• Auto-regulated control pressure based on system demand.
• Efficient built-in replenish ring-style check valves .

Long life and reliability:
• Lifetime hydro-mechanical controls.
• Robust barrel-bearing design.

Rapid Commissioning:
• Visual displacement indicator.
• Simple diagnostic capabilities.

Fast and accurate controls:
• Efficient and robust control logic.
• No need for cross port reliefs.
• Stable system flow with low resistance cam design.

Ease of service:
• Quick-change valve block.
• Modular controls.
• Replacement shaft sleeve.

Design flexibility:
• Controls that mount on either side.
• Simplified plumbing with built-on hot oil shuttle.
• Compact package with integrated auxiliary pumps.
• Capability for individual remote pressure compensators.

PARKER GOLD CUP hydrostatic pumps and motors perform in such severe duty applications such as:
• Mining, exploration equipment, well drilling.
• Drilling, drill rigs, oil exploration.
• Construction and construction equipment.
• Material handling.
• Logging equipment.
• Land and sea military equipment.
• Shredding/reducing equipment.
• Gas turbine starting.
• Crane and winches.
• Water jet cutting systems.
• Energy recovery applications.

View Complete Details

Yes, I am interested!

  • PARKER High Pressure Axial Piston Pump
  • PARKER High Pressure Axial Piston Pump
PARKER High Pressure Axial Piston Pump
Interested in this product?
Get Best Quote

PARKER High Pressure Axial Piston Pump P3:

The P3 offers a built-in impeller to suit applications requiring higher self-priming speeds or when the vehicle is operating in high altitudes. The P3 pump line is available in three frame sizes from 75 to 145 cm³/rev and features control options that are suitable for most mobile applications. Both of these pumps offer benefits like:

• Compact and easy to install.
• Less noise to insulate.
• High self-priming speeds.
• Gauge ports are standard.

PARKER High Pressure Axial Piston Pump P2:

Variable Displacement Piston Pumps Series P2/P3. These variable displacement piston pumps designated “P2” are intended for mobile applications, featuring a very compact design, low noise level and low pressure ripple. The pumps are very stable and respond quickly to system demands in many different types of mobile machinery, and are designed for cost effective installation within the limited space available on modern mobile machines.

The P2 series is available in four frame sizes from 60 to 145 cm³/rev and features control options that are suitable for most mobile vehicle applications.

Features / Benefits:

• Compact.
• Low noise level.
• Sealed shaft bearing.
• Service friendly.
• Reliable.
• Long lasting.
• Flexible.
• Easy to install.
• High self-priming speed.

Markets:

• Forestry Feller Bunchers.
• Knuckle Boom Loader.
• Skidder.
• Forwarder.
• Construction Wheel Loader.
• Dozers.
• Off-Highway Trucks.
• Mining Drill Rigs.
• Loaders.
• Material Handling Truck Mounted Cranes.
• Lift Trucks.
• Reachstacker.
• Recycling Shredders.
• Balers.
• Compactors

View Complete Details

Yes, I am interested!

  • PARKER Medium Pressure Super Charged Piston Pump
  • PARKER Medium Pressure Super Charged Piston Pump
PARKER Medium Pressure Super Charged Piston Pump
Interested in this product?
Get Best Quote

PARKER Medium Pressure Super Charged Piston Pump:

Features:

• High Strength Cast-Iron Housing.
• Built-In Supercharger.
• High Speed Capability - 3000 RPM (2600 RPM PAVC100).
• Sealed Shaft Bearing.
• Two Piece Design For Ease of Service.
• Cartridge Type Controls - Field Changeable.
• Replaceable Bronze Clad Port Plate.
• Airbleed Standard for Quick Priming.
• Hydrodynamic Cylinder Barrel Bearing.
• Thru-Shaft (PAVC100 Only).
• Full Pressure Rating On Water Glycol Fluids.
• Pump Case and Shaft Seal - See Inlet Pressure Only.
• Filter and/or Cool Drain Line (100 PSI Max).

Controls:

• Pressure Compensated.
• Load Sensing.
• Horsepower (Torque) Limiting.
• Horsepower and Load Sensing.
• Remote Pressure Compensated.
• Adjustable Maximum Volume Stop.
• Electrohydraulic Pressure.
• Electrohydraulic Flow & Pressure (Servo Control).
• Low Pressure Standby.

View Complete Details

Yes, I am interested!

  • PARKER PVP Medium Pressure Piston Pump
  • PARKER PVP Medium Pressure Piston Pump
PARKER PVP Medium Pressure Piston Pump
Interested in this product?
Get Best Quote

PARKER PVP Medium Pressure Piston Pump:

Features:

•High strength cast-iron housing for reliability and quiet operation.
•Vickers porting interchange.
•Optional inlet/outlet locations for ease of installation.
•Replaceable bronze port plate.
•Replaceable piston slipper plate.
•Thru-shaft capability SAE A or AA pilots offered.
•Low noise environment.
•Fast response times.
•Metric pilot shaft and ports available.

View Complete Details

Yes, I am interested!

PARKER Medium Duty Axial Piston Pump
Interested in this product?
Get Best Quote

PARKER Medium Duty Axial Piston Pump:

Variable displacement, axial piston pump for open-circuit applications. Medium pressure, continuous operation at pressures up to 4060 PSI (280 bar). Compact, quiet and efficient control. Wide temperature range suitable for mobile applications.

Features:

• Low flow ripple to further reduce noise.
• Elastomer seals that eliminate gaskets and external leakage.
• SAE and ISO standard mounting flanges and ports.
• Long life, low friction, tapered-roller shaft bearings.
• Long life, low friction, hydrostatically balanced cam bearings.
• End or side inlet and outlet ports.
• Case drain ports for horizontal or vertical, shaft-up mounting.
• Optional minimum and maximum displacement adjustments.

Benefits:
• Compact overall package size.
• Quiet operation.
• High operating efficiency for lower power consumption and reduced heat generation.
• Simple hydraulic controls with "no-leak" adjustments.
• Full power through-drive capability.
• Easy to service.

View Complete Details

Yes, I am interested!

PARKER Aluminum High Pressure Motor
Interested in this product?
Get Best Quote
PARKER Aluminum High Pressure Motor:

Series 505 and 511:


Features:
• Motor and Flow Divider, configurations are available.
• 13 tooth gear profile.
• Offer superior performance, high efficiency and low noise
at high operating pressures.
• Advanced performance version of the international "Bushing Block" style.
• Pressure balanced bearing blocks assure maximum efficiency under all operating conditions.
• High strength materials and large journal diameters provide low
bearing loads for high pressure operation.
• Unmatched design and application versatility.

Applications:
• Materials Handling.
• Turf Care and Grass cutting.
• Construction Equipment.
• Truck, Bus, & Recreational Vehicles.
• Municipal Street Sweepers.
• Military Applications.

Parker’s Integral Valve Program was developed in response to requests from our OEM customers to reduce costs. Our applications engineers responded to this challenge by integrating the valves typically required for machine functions into our hydraulic pumps and motors. This integration has reduced the required number of purchased components, reduced or eliminated the need for hoses and fittings (and potential leak points), and reduced pump system assembly labor costs.

Integral Valve Options:
• Anti-Cavitation Valve.
• Pressure Relief Valve.
• Solenoid Unloading Valve.

Note: 505 Model Motors are also marketed under the Tyrone, Commercial, and Ultra brand names

View Complete Details

Yes, I am interested!

PARKER High Pressure Aluminum Pump
Interested in this product?
Get Best Quote
PARKER high Pressure Aluminum Pump:

Features:
• Single and Multiple configurations are available.
• Advanced performance version of the international
"Bushing Block" style pumps.
• Pressure balanced bearing blocks assure maximum
efficiency under all operating conditions.
• Superior performance, high efficiency and low noise
at high operating pressures.
• High strength materials and large journal diameters
provide low bearing loads for high pressure operation.

Applications:
• Materials Handling.
• Turf Care and Grass cutting.
• Construction Equipment.
• Truck, Bus, & Recreational Vehicles.
• Municipal Street Sweepers.
• Military Applications.

Parker’s Integral Valve Program was developed in response to requests from our OEM customers to reduce costs. Our applications engineers responded to this challenge by integrating the valves typically required for machine functions into our hydraulic pumps and motors. This integration has reduced the required number of purchased components, reduced or eliminated the need for hoses and fittings (and potential leak points), and reduced pump system assembly labor costs.

Available Valve Options:

• Anti-Cavitation Valve.
• Pressure Relief Valve.
• Solenoid Unloading Valve.

View Complete Details

Yes, I am interested!

PARKER Aluminum Gear Pump
Interested in this product?
Get Best Quote

PARKER Aluminum Gear Pump:

(PGP 505 Series)

Features:

· Single and Multiple pump/motor, and Flow Dividers configurations are available.

· Speeds up to 4000 rpm.

· Fluid displacements up to 0.73 in3/rev (12 cm3/rev).

· Continuous pressures up to 3988 psi (275 bar).

· Intermittent pressures up to 4350 psi (300 bar).

· Output flows up to 8 gpm (30.2 lpm).

· A wide variety of integral valve options are available .

· Motors are available in a single or bi-rotational configuration.

PARKER Aluminium Gear Pump PGP 511 Series:

Features:

· Single and Multiple pump/motor, and Flow Dividers configurations are available.

· Speeds up to 4000 rpm.

· Fluid displacements up to 1.89 in3/rev (31 cm3/rev).

· Continuous pressures up to 3500 psi (250 bar).

· Intermittent pressures up to 3988 psi (275 bar) .

· Output flows to 19 gpm (71.9 lpm) .

· A wide variety of integral valve options are available.

· Motors are available in a single or bi-rotational configuration.

View Complete Details

Yes, I am interested!

PARKER Hydrostatic Steering Unit
Interested in this product?
Get Best Quote
PARKER Hydrostatic Steering Unit:

The HGF series is designed for light duty applications such as lawn and garden equipment, small agricultural equipment, small off-highway vehicles and material handling equipment.

Features:
- Sizes: 54 to 162 cc/rev.
-Operating pressure upto 125 bar.

· Full-pressure shaft seal to withstand full system back pressure.

· Pressure dams provide a barrier of pressurized system oil between metered oil and return.

· Needle thrust bearing reduces input torque required to steer.

· SAE #6 female o-ring ports standard.

· Integral mounting studs simplfy installation.

· Manual emergency steering.

· Integral relief available with five pressure settings.
-Used for off-highway vehicles.

View Complete Details

Yes, I am interested!

Danison Vane Pump and Motor
Interested in this product?
Get Best Quote
Danison Vane Pump and Motor:

Radial Motors fixed displacement :


MR/MRE-MRT/MRTE Series:
Displacement - 32 - 23034 cm3/rev.
Maximum Pressure: 250 - 300 bar.
Maximum Torque - 0.51 - 366.6 Nm/bar.
Maximum Speed - 75 - 1400 rpm.

Dual/Variable Displacement MRD/MRV Series:
Displacement - 152 - 5301 cm3/rev.
Maximum Pressure- 25- - 300 bar.
Maximum Torque - 2.42-86.01 Nm/bar.
Maximum Speed - 160 - 1000 rpm.

Double Pumps Variable & Fixed Displacement T6H Series:
This pump is a combination of a variable axial piston and fixed displacement
vane pump in a common body.
Displacement - P10 - 61.9 cm3/rev,
P25.8 - 158 cm3/rev.
Maximum speed - 2400-2600 rpm.
Maximum pressure - P1 240-275 bar.
P2 240 - 300 bar.

View Complete Details

Yes, I am interested!

  • PARKER Tandem Integrated Hydrostatic Piston Pump
  • PARKER Tandem Integrated Hydrostatic Piston Pump
PARKER Tandem Integrated Hydrostatic Piston Pump
Interested in this product?
Get Best Quote
PARKER Tandem Integrated Hydrostatic Piston Pump:

The HP2 Series is composed of two independently controlled over-center piston pumps on a single drive shaft. They are housed in a compact reservoir with a filter and associated valving. Typical input speed is 3600 RPM. Intermittent pressure 2600 psi.

The HP2 Series is composed of two independently controlled over-center piston pumps on a single input drive shaft. They are housed in a compact reservoir with a filter and associated valving. All that is required to complete a dual path hydrostatic propulsion system is to run lines to the hydraulic drive motors. Typical input speed is 3600 RPM. Intermittent pressure is 2600 psi.

PARKER HP2 Series tandem pump system features:
• Two 11.5 cc or 16.0 cc pumps.
• 2.5 quart integral reservoir.
• Shock and/or check valves.
• Integral system cooling fan.
• Charge pump.
• SAE “B” mounting flange, direct drive possible to eliminate belts and pulleys.

Common applications:
• Zero turn mowers.
• Trenchers.
• Power buggies.

View Complete Details

Yes, I am interested!

  • Parker Dual Displacement Bent Axis Motor
  • Parker Dual Displacement Bent Axis Motor
Parker Dual Displacement Bent Axis Motor
Interested in this product?
Get Best Quote
PARKER Dual Displacement Bent Axis Motor:

The T12 two-displacement motor is tailor-made for track drives. It allows a high ratio between high and low apeed and installs as easily as a fixed displacement motor.

Max speed ratio is 3.33- to-1. The T12 is a cartridge motor based on the well proven V12series. The specially designed end cap with dual side ports permits a very short installation. A simple setting device moves the cylinder barrel to the maximum or minimum displacement position.
The setting is controlled by an external hydraulic pilot signal. A brake valve can be fitted without increasing the axial length of the motor. The twin ports have the samemounting pattern as those of the F12 and V12 motors. The F12/ V12 accessory valve program also fits the T12 motor. As an option, integrated pressure relief valves can be included.

View Complete Details

Yes, I am interested!

PARKER Load Sensing Truck Variable Displacement Pump
Interested in this product?
Get Best Quote
PARKER Load Sensing Truck Variable Displacement Pump:

The VP1 is the world's first variable displacement pump for truck applications. It can be close-coupled to a gearbox PTO (power take-off) or to a coupling independent PTO (e.g. an engine PTO) which meets ISO standard 7653-1985.

Features:

•Variable displacement. 
•Low noise level. 
•High power-to-weight ratio. 
•Compact and lightweight. 
•Highly efficient. 
•Withstands low temperatures.

View Complete Details

Yes, I am interested!

PARKER High Speed Hydraulic Motor
Interested in this product?
Get Best Quote
Parker High Speed Hydraulic Motor:

(Series M2/M4)


Features:
• High Starting Torque typically 90% of running torque.
• Smooth Output Torque throughout the entire speed range of the motor.
• High Speed Capabilities up to 7500 rpm on some models.
• Bi-Directional Operation built in checks internally relieve high pressure from the shaft seal.
• High Pressure Shaft Seal allows back pressure to 400 PSI without the requirement of Case Drain.
• Standard SAE Mounting 2 or 4 bolt mounting fl anges, shaft and port dimensions conform to SAE standards.
• Long Life & Quiet Operation Precision Gerotor Design results in a motor with extended operating life and noise levels below most other hydraulic motors.
• Heavy Duty Bearings capable of withstanding radial and thrust loads.

View Complete Details

Yes, I am interested!

  • PARKER Mobile Vane Pumps
  • PARKER Mobile Vane Pumps
PARKER Mobile Vane Pumps
Interested in this product?
Get Best Quote

PARKER Mobile Vane Pumps - T6 Series:

High pressure rating - Pressure ratings to 275 bar reduce size and cost of actuators, valves and lines, give extended life at reduced pressures.

Better efficiency under load increases productivity, reduces heating and operating costs.

Up to 32 positions for double pumps and up to 128 for triple pumps: this reduces mounting costs and improves performance.

Increase operator safety and acceptance.

Provides for drop-in assemblies. This allows easy conversion or renewal of serviceable elements in minutes at minimum expense and risk of contamination.

Including phosphate esters, chlorinated hydrocarbons, water glycols and invert emulsions may be pumped at higher pressures and with longer service life by these pumps.

View Complete Details

Yes, I am interested!
2.8/5★★★★★★★★★★

Reviewed by 5 Users

5 star1

4 star1

3 star1

2 star0

1 star2

Most Relevant Reviews

N

Nandkumar Arage ★★★★★ ★★★★★

13-January-20

S

Surjeet Singh ★★★★★ ★★★★★

11-December-19

9814708746

Get in touch with us

Reach Us

Innovative TechnologiesKhatau Building, 1st Floor, 44, N. G. N. Vaidya Marg Shahid Bhagat Singh Road, Old Custom House Road, Bombay Stock Exchange, N G N Vaidya Marg, Mumbai-400001, Maharashtra, India

D. Desai (Partner)

View Mobile Number40% Call Response Rate

Send SMS
Send Email
Leave a Message, we will call you back!
Send your enquiry to this supplier
I agree to the terms and privacy policy

We Accept Online Payments

All Rights Reserved (Terms of Use)