International Instruments Industries

• AC Current: up to 1000 A TRMS (True RMS) — safe and accurate AC current measurement.

• DC Voltage: up to 1000 V.

• AC Voltage: up to 750 V.

• DC Current: up to 6000 µA.

• Resistance: up to 60 MΩ.

• Capacitance: up to 9.999 mF.

• Frequency: up to 10 MHz.

• Duty Cycle: 0.1 % – 99.9 %.

• Temperature: via included K‑type thermocouple (up to ~1000 °C).

• Display: 3 5/6 digit LCD with 6000 counts for precise reading resolution.

• True RMS: Measures AC signals accurately even if waveform is distorted.

• Auto & Manual Ranging: Choose automatic or manual selection of ranges.

• Backlight: LCD backlight for easy viewing in low light conditions.

• Data Hold: Freeze the current reading on screen for note‑taking or reference.

• Diode Test — for semiconductor checks.

• Audible Continuity Test — beeps when circuit continuity is detected.

• Temperature Measurement — using the supplied K‑type probe.

• Auto Power Off & Low Battery Indication — conserves battery and alerts when it’s low.

• Jaw Opening: Suitable for conductor diameter up to ~30 mm.

• Power: Typically powered by 2 × 1.5 V AA batteries (included).

• Category Rating: Often CAT IV 600 V (industrial safety rating) — confirms safe use on electrical installations (check label for exact rating).

• Portable & Rugged: Handheld design with protective casing for field work.

✔ Clamp meter unit
✔ Test leads
✔ K‑Type thermocouple for temperature measurement
✔ Batteries
✔ Instruction manual
✔ Carrying case

Ideal for:

• Electricians and technicians for current, voltage, and resistance checks

• HVAC systems diagnostics

• Motor and power electronics troubleshooting

• Maintenance and safety inspections

• Temperature and frequency measurements in field environments

Additional Information:

• Item Code: 1008
• Delivery Time: READY STOCK
• Packaging Details: 1NOS PACKING

The ZOYI ZT‑81 is a dependable, cost-effective multimeter offering essential features and reliable accuracy in a compact form. If you need higher resolution, temperature sensing, or NCV capability, consider stepping up to models like the ZT‑109 or ZT‑111. But for everyday and light professional tasks, it’s a solid pick.

1. AC Current Measurement:

   • Range: Typically 0–1000 A (or as per the model's specification).

   • Clamping Mechanism: Can clamp around a conductor to measure the current flowing through it without direct contact.

   • Accuracy: High accuracy, usually within 1–2% for most measurements.

2. AC Voltage Measurement:

   • Range: 0–600 V AC.

   • Accuracy: Allows accurate measurement of voltage in standard household or industrial electrical systems.

3. Resistance Measurement:

   • Range: 0–20 MΩ (typically).

   • Accuracy: Suitable for measuring the resistance of various components, circuits, and cables.

4. Frequency Measurement:

   • Range: Can measure the frequency of AC signals, typically from 1 Hz to 100 kHz.

5. Display:

   • Type: Large LCD display, often with a backlight for easier reading in low-light conditions.

   • Digits: Usually a 3 to 4-digit display.

   • Data Hold Function: Allows the user to freeze the reading for easy recording.

6. Other Features:

   • Auto-Ranging: Automatically adjusts measurement ranges for convenience.

   • Low Battery Indication: Alerts when the battery is low.

   • Data Hold: To keep the reading displayed even after the test leads are disconnected.

   • Overload Protection: To protect the meter from damage due to excessive current or voltage.

7. Safety Features:

   • CAT III 600V Rating: Suitable for use in environments with voltages up to 600V.

   • CE Certified: Ensures compliance with international safety standards.

   • Double Insulation: Offers added protection for the user.

8. Other Specifications:

   • Power Supply: Typically powered by a 9V battery.

   • Operating Temperature: Usually -10°C to 50°C.

   • Storage Temperature: Typically -20°C to 60°C.

   • Dimensions: Small and portable, fitting in the hand comfortably.

   • Weight: Light enough to carry around (usually under 500g).

9. Applications:

   • Ideal for electricians, HVAC technicians, and maintenance professionals.

   • Commonly used to measure current in circuits, check voltage levels, troubleshoot electrical systems, and perform preventive maintenance.

• Non-invasive Measurement: As a clamp meter, it allows for quick, safe, and non-contact measurements.

• User-Friendly: Simple operation with auto-ranging and data hold.

• Compact and Portable: Easy to carry and use in the field.

• Limited DC Measurements: Most clamp meters, including this model, are designed for AC current/voltage measurements, with limited or no support for DC.

• Lower Resolution: May not be as accurate for measuring very small currents or voltages compared to dedicated multimeters.

Additional Information:

• Item Code: DT-2250
• Delivery Time: READY STOCK

• Test Leads x 1 Pair
• 1.5V 'AA' Battery x 2 Pcs
• Instruction Manual x 1 Pc
• K Type Thermocouple (upto 260° C) x 1 Pair
• Carrying Case x 1 Pc

Additional Information:

• Item Code: 2502TAUTO
• Production Capacity: 100 PEC IN STOCK
• Delivery Time: READY STOCK
• Packaging Details: INSTRUMENT IS SUPPLIED IN CARRYING CASE WITH TEMPERATURE SENSOR, TEST LEADS, INSTRUCTION MANUAL.

• Test Leads x 1 Pair
• 1.5V 'AAA' Battery x 2 Pcs
• Instruction Manual x 1 Pc
• Carrying Case x 1 Pc

Pressure Range:

• ±2 psi (±55.40 in H₂O) — primary measurement span. 

Units & Resolution:

• inH₂O: ±55.40 in H₂O @ 0.01 resolution

• psi: ±2.000 psi @ 0.001 resolution

• mbar: ±137.8 mbar @ 0.1 resolution

• kPa: ±13.79 kPa @ 0.01 resolution

• inHg: ±4.072 in Hg @ 0.001 resolution

• mmHg: ±103.4 mmHg @ 0.1 resolution

• kg/cm²: ±0.140 kg/cm² @ 0.001 resolution

• bar: ±0.001 bar resolution 

This range and unit versatility make it useful across multiple pressure measurement contexts (airflow, duct tests, blower systems). 

• Accuracy: ±0.3 % of full scale (FSD) at typical conditions (~25 °C)

• Repeatability: ±0.2 %

• Linearity/Hysteresis: ±0.29 % of full scale output (FSO) 

Typical response time: ~0.5 seconds. 

✔ Large dual LCD with backlight — easy to read even in low light. 
✔ Data hold — freeze current measurement on screen. 
✔ Max / Min / Average values with time stamp — good for detailed diagnostics. 
✔ Zero adjust, offset & DIF (differential) functions — fine tuning and comparative measurements. 
✔ Auto power off and low battery indicator — energy efficient.
✔ USB computer interface with software (Windows) for logging and analysis. 

• Power: 1 × 9 V battery (6F22). 

• Operating Temp: ~0 °C to 50 °C;
  Storage: ~10 °C to 60 °C. 

• Dimensions: approx. 210 × 75 × 50 mm. 

Included with unit:

• Soft carrying case

• Tubing

• Manual

• 9 V battery

• USB cable & software CD for PC interface. 

✔ HVAC system balancing & duct checks
✔ Filter & clean-room pressure monitoring
✔ Airflow & gas pressure measurement
✔ Laboratory pressure testing
✔ Industrial air systems diagnostics 

Additional Information:

• Item Code: PM-6202
• Delivery Time: READY STOCK
• Packaging Details: 1NOS PACKING

• It uses a non‑contact inductive/capacitive sensing method: the detector’s tip senses the presence of AC voltage by detecting the electric field around a live conductor (even if wire is insulated). 

• When it senses voltage above the threshold (~ 90 V AC or more), it triggers the LED (tip lights / flashes) and buzzer — alerting user that the line is live. 

• Because it’s non‑contact, it’s safer: you don’t need to strip wires or expose conductors to check voltage — useful for initial “live‑wire detection / sanity check” before working on circuits.

• Checking whether wires, sockets, switches, breakers, circuits are live before doing maintenance or repairs — especially in homes, offices, small installations.

• Quick safety verification in wiring work — for electricians, maintenance workers, or DIY users to ensure circuits are de‑energized or to detect live wiring.

• Troubleshooting / fault detection — e.g. checking if a wire is carrying supply even if insulation intact; helpful for wiring faults, miswired sockets, dead outlets, etc.

• Portable / on‑site inspections — lightweight pen‑type form makes it easy to carry in a tool kit or pocket for quick checks.

• Dark or hard‑to‑reach spaces — built‑in LED flashlight helps when detecting voltage in low‑light areas (behind panels, in crawl spaces, wiring closets).

• It only detects presence / absence of AC voltage (live/non‑live). It does not measure actual voltage value (magnitude), current, or quality of supply.

• Detection may depend on wire insulation, proximity, strength of field; sometimes in multi‑wire or shielded cables, detection may be unreliable.

• Because it’s non‑contact and capacitive/inductive, it gives qualitative result (live / not‑live) not quantitative measurement — good for safety check, not for diagnostic measurement.

• Should not be used as the sole proof for safety — always double‑check with a proper multimeter / tester before touching wires / working on circuits.

Additional Information:

• Item Code: AC-II
• Delivery Time: READY STOCK
• Packaging Details: 1NOS PACKING

• Measuring very low resistance — e.g. contact resistance at joints, welds, connectors; ground-resistance testing; quality control in cable manufacturing; transformer winding resistance; switchgear contacts; motor coils; bus-bar joints; bonding / grounding checks. 

• Professional / Industrial maintenance & commissioning — power plants, electrical utilities, manufacturing lines, switchgear installations, transformer maintenance etc. 

• Situations where accuracy and repeatability matter — because the 4-wire method reduces error, and the high resolution + storage supports precision testing, logging, and documentation over time. 

• For very high resistance (in kΩ), the meter will still work — but the extreme precision (µΩ resolution) is meaningful only in low-resistance ranges.

• As with any precision instrument measuring very low values, lead connections and contact stability matter — you must ensure good, stable connections for reliable results (though 4-wire method helps).

• The built-in battery must be maintained: low battery may affect accuracy; instrument needs regular charging if used often. 

• Testing contact resistance of connectors, relays, circuit breakers — ensuring good connectivity, low contact resistance.

• Measuring transformer/motor/coil winding resistance — useful in commissioning or maintenance to detect winding faults.

• Checking cable joint resistance, bus-bar joints, earthing/ground connections — critical in power distribution / grounding systems.

Additional Information:

• Item Code: MO-5004
• Delivery Time: READY STOCK
• Packaging Details: 1NOS PACKING

This is a non-contact high-voltage detector designed primarily for safety awareness when personnel are working near high-voltage lines and equipment. It does not measure voltage numerically but alerts the user with sound and light when approaching an energized conductor within a safety distance.

• Non-contact detection: Senses the presence of high voltage without making electrical contact.

• Wearable (helmet-type): Designed to be mounted on a safety helmet for hands-free operation during fieldwork.

• Alarms: Both audible buzzer and visual LED indicators trigger when high voltage is detected close by.

• Induction-based sensing: Uses non-contact induction technology for reliable triggering.

• Battery operated: Powered by 2× CR1632 button cells.

• Suitable for overhead lines: Especially useful around overhead high-voltage lines during maintenance, inspection, or approach work.

(Safety distances for trigger alarms shown in Metravi catalogue vary by level; for example ~0.1 m at 1 kV up to ~5.5 m at 500 kV in helmet type devices).

When the wearer approaches a live high-voltage conductor within a certain safety distance threshold for the corresponding voltage level, the detector automatically triggers with a visual LED and audible buzzer. This helps alert electrical workers working near high voltage to potential danger without touching the conductor.

• Electrical line maintenance and repair work

• Substation or overhead line inspection

• Safety awareness tool for linemen and technicians

• Detecting presence of high voltage in enclosed or open spaces

• This device does not measure exact voltage values — it alerts presence of high voltage in a range.

• It usually works best on single-core conductors and may not trigger on shielded/armored cables.

• Always use as a safety indicator not as a replacement for proper voltage measurement instruments.

Additional Information:

• Item Code: HT500
• Delivery Time: READY STOCK
• Packaging Details: 1NOS PACKING

1. Voltage Measurement Range:

   • The Metravi 276HD can measure voltages from 0V to 276 kV for both AC and DC circuits. This wide range makes it suitable for high-voltage testing in a variety of industrial and electrical power systems.

2. Accuracy:

   • With an accuracy of ±2%, the tester provides reliable measurements for high-voltage applications. The accuracy level is sufficient for most industrial applications, though certain high-precision testing might require more specialized equipment.

3. Contact-Type Testing:

   • This tester is a contact-type voltage tester, meaning it requires direct contact with the tested conductor or terminal. This provides more accurate readings compared to non-contact voltage testers, which are less reliable for high-voltage measurements.

4. Analog Display:

   • The tester uses an analog display to show the voltage level continuously. In addition to the analog display, the tester is equipped with LED indicators to visually indicate the presence of voltage and audible alarms (buzzer) to alert the user when voltage is detected or when an overload occurs.

5. Overload Protection:

   • Overload indication is an important safety feature that helps protect the tester from damage when subjected to excessive voltage levels. This ensures the tester is not exposed to potentially dangerous conditions.

Additional Information:

• Item Code: 276HD
• Delivery Time: READY STOCK
• Packaging Details: 1NOS PACKING

Additional Information:

• Item Code: DC2-26

International Instruments Industries offers Electrosmog Meter,Meco Brand Model 9810, 9720

Electrosmog Meter is a hand held device for monitoring high frequency radiation in the arnge from 10MHz to 8GHz. The unit of measurement and the measurement types have been selected to express in units of electrical and magnetic field strength and power density. At high frequencies, the power density is of particular significance. It provides a measure of the power absorbed by a person exposed to the field. This power level must be kept as low as possible at high frequencies. The meter can be set to display the instantaneous value, the maximum value measured or the average value. Instantaneous and maximum value measurements are useful for orientation.

The MECO Electrosmog Meter is widely used in various kinds of transmitters, detectors and other communication media. Our entire range is manufactured using optimum quality raw material and advanced machines by our associated vendors. 

The MECO Electrosmog Meter has high dynamic range. It is mainly used to measure High Frequency Electromagnetic Wave Field Strength and Mobile Phone Base Station Antenna Radiation Power Density. It is also used for Wireless Communication Application, RF Power Measurements for Transmitters, Wireless LAN (Wi-Fi) Detection, Installation, Spy Camera, Wireless Bug Finder, Cellular / Cordless Phone Radiation Safety Level, Microwave Oven Leakage Detection, Personal Living Environment EMF Safety. It is easy to use. It comprises of configurable audible alarm with buzzer for threshold and memory function.

Display & User Interface

• 3-digit, single-line 7-segment white LED display with capacitive-touch keypad for intuitive control.

Sensor & Control Functionality

• Built-in RH (Relative Humidity) sensor with input range from 0% to 100% humidity.

• Controls via an ON–OFF control method, with a single adjustable setpoint for humidity.

Output & Alarms

• Main control relay: 10 A @ 250 VAC for primary humidity control.

• Alarm relay output: 5 A @ 250 VAC for high/low alarm signaling or external alerts.

Accuracy & Settings

• Humidity measurement accuracy of ±3% RH between 10% and 80%; ±4% RH outside that range.

• Display resolution: 1% or 0.1% (depending on configuration) with adjustment options (e.g., display offset ±19.9%).

• Reset (hysteresis/delay) through adjustable timer from 0 to 99 minutes.

Environmental & Construction Details

• Supply voltage: Universal range of 90–270 V AC/DC, compatible with 50/60 Hz systems.

• Power consumption: Up to 3 VA @ 230 VAC.

• Front panel protection: Ingress protection up to IP65, making it dust-tight and splash-resistant.

• Mounting: Compact panel-mount size at 36 × 72 mm.

Certifications & Build Quality

• CE-certified, ensuring compliance with EU standards for industrial equipment.

Additional Information:

• Item Code: HC404
• Delivery Time: READY STOCK
• Packaging Details: 10 NOS. PACKING

The Metravi TDS‑3 is a portable digital TDS (Total Dissolved Solids) meter ideal for quick water quality checks in drinking water, aquariums, RO filters, plants, hydroponics, and general water monitoring. It estimates dissolved solids by measuring electrical conductivity and converting it to a TDS value.

• Measurement: Total Dissolved Solids (TDS) in ppm (parts per million)

• TDS Range: 0 – 9,990 ppm (wide range for most water testing needs)

• TDS Resolution:

  • 1 ppm (for 0 – 999 ppm)

  • 10 ppm (for 1,000 – 9,990 ppm)

• Accuracy: ± 2 % (typical rating for handheld TDS meters)

• Temperature Measurement: 0 °C – 50 °C (built‑in thermometer)

• Probe Type: Titanium alloy electrode (anti‑rust, anti‑corrosion)

• Display: LCD screen (shows TDS and often temperature)

• Power Source: 2 × 1.5 V button cell batteries (compact and battery‑powered)

• Functions:

  • Data Hold: Freeze the current reading for easy viewing after removing from water

  • Auto Power Off: Shuts off automatically after a few minutes of inactivity to save battery

This meter is especially useful for:
• Drinking water testing — quick check on water purity
• RO/filtered water validation — verify output from purifiers
• Aquarium water monitoring — maintain suitable environment for fish
• Garden/hydroponics water — check nutrient/mineral levels
• General household water quality sampling

The meter uses a conductivity‑based measurement: dissolved ions (salts/minerals) increase conductivity, and the meter calculates the approximate TDS value using a conversion factor. The temperature sensor helps compensate for temperature differences to improve TDS measurement.

• Dip the probe up to the maximum immersion mark (~2″) in water, wait for the display to stabilize, then use the Hold button before pulling it out to record the value. 

Additional Information:

• Item Code: TDS-3
• Delivery Time: READY STOCK
• Packaging Details: 1NOS PACKING

• Tension and compression testing — e.g. checking push/pull force of springs, fasteners, levers, small assemblies. 

• Quality control / Assembly line checks — ensure that components meet force/strength tolerances. 

• R&D / product testing — useful in lab or prototyping scenarios where small force measurements need precision.

• Calibration tasks — as part of calibrating other mechanical testers or measuring devices, using the gauge as a reference. 

• The ±5 kgf range makes it suitable only for small to medium forces. Heavier loads will exceed capacity.

• Accuracy depends on proper use: avoid environments with vibration or corrosive media. 

• As with most precision gauges, regular calibration and proper handling will be required to maintain accuracy.

Additional Information:

• Item Code: FG-5KG
• Delivery Time: READY STOCK
• Packaging Details: 1NOS PACKING

1. Comprehensive Acidity Testing:

   • The Metravi Acidity Testing Kit is specifically designed to measure pH levels (acidity or alkalinity) of liquids, slurries, and some solid materials. The kit typically includes pH test papers, a digital pH meter, or indicator solutions, depending on the version of the kit.

   • It allows users to easily determine whether a solution is acidic, neutral, or alkaline, based on its pH value, which ranges from 0 (strongly acidic) to 14 (strongly alkaline), with 7 being neutral.

2. High Accuracy:

   • The kit provides precise pH measurements with a high degree of accuracy, ensuring reliable and repeatable results. This is critical in industrial applications where even small deviations in pH levels can affect product quality, safety, or process performance.

   • For liquid samples, the digital pH meter or indicator solution provides fast, accurate readings, while pH test papers give visual confirmation of the acidity or alkalinity based on color change.

3. Range of Applications:

   • The Metravi Acidity Testing Kit is suitable for use in a variety of applications, including:

     • Water Treatment: Testing water for pH levels to ensure that the water is within safe limits for consumption or industrial use.

     • Food and Beverage: Ensuring products meet regulatory standards by monitoring the acidity or alkalinity of foods, drinks, and other consumables.

     • Agriculture: Monitoring soil pH to optimize plant growth and ensure the correct pH levels for different crops.

     • Laboratory Use: Performing pH tests on chemical solutions in educational or research settings.

     • Industrial Processes: Maintaining correct pH levels in manufacturing processes like pharmaceutical production, cosmetic formulations, and chemical manufacturing.

4. User-Friendly Design:

   • The Metravi Acidity Testing Kit is designed for ease of use, even by individuals with limited technical knowledge. The digital pH meter features an LCD screen for clear, easy-to-read pH readings. Test papers and indicator solutions are also included for simple, visual pH testing.

   • The kit typically includes easy-to-follow instructions, ensuring users can quickly perform tests and interpret results.

5. Durability and Portability:

   • The Metravi Acidity Testing Kit is designed to be compact and portable, making it ideal for field testing and on-site applications. Whether you're conducting tests in the lab, at a manufacturing site, or in outdoor environments, the kit can be easily carried and used in various conditions.

   • The digital pH meter is generally designed with robust materials to withstand regular use in both laboratory and industrial settings.

6. Multi-Sample Testing:

   • The kit typically includes sufficient materials for multiple tests, making it suitable for both small and large-scale testing. For example, if using test papers, the kit may include a roll or pack of pH paper strips that can be used for testing several samples over time.

   • For digital pH meters, the kit may include a calibration solution to ensure the meter remains accurate over time.

1. AC Voltage Measurement:

   • The Metravi AC-1 is designed specifically for measuring AC voltage in various applications, such as outlets, electrical panels, power distribution systems, and household appliances.

   • It provides accurate readings for standard AC voltage used in residential and industrial circuits.

2. Voltage Range:

   • The voltage range for the Metravi AC-1 typically covers 90V to 600V AC, which is suitable for a variety of tasks, from household wiring to industrial systems.

   • It can measure both low-voltage systems (like household outlets) and higher-voltage systems (used in commercial or industrial environments).

3. Clear Digital Display:

   • The tester typically comes with a digital LCD screen that clearly displays the voltage reading in real-time.

   • The LCD display provides a precise and easy-to-read output, even in low-light conditions.

4. Safety Features:

   • The Metravi AC-1 often includes built-in safety features such as overload protection to prevent the device from being damaged when exposed to voltages higher than its rated capacity.

   • It may have insulated probe tips and high-quality rubberized casings to ensure safety during use, reducing the risk of accidental electrical shocks.

5. Non-Contact Voltage Detection (Optional):

   • Some variants of the Metravi AC-1 tester might have non-contact voltage detection capabilities. This feature allows you to detect the presence of voltage in live wires without needing to make direct contact.

   • Visual indicators (LED lights) or audible alerts (beeps) may signal when a live voltage is detected.

6. Durability and Build:

   • The Metravi AC-1 is designed to be durable and rugged, often featuring a shock-resistant casing that can withstand drops and rough handling, making it suitable for use in industrial environments.

   • It is typically lightweight, making it easy to handle and carry around while working on different electrical systems.

7. Ergonomics:

   • The device is often designed with an ergonomic handle or grip for comfortable usage, especially during prolonged use.

   • The compact size allows for easy portability, fitting well in toolboxes or workbags.

8. Battery-Powered:

   • The tester is usually battery-operated, powered by a 9V or AAA batteries, depending on the specific model.

   • Batteries can be easily replaced, and the tester typically has low battery indicators to warn you when the power is running low.

9. Compliance with Safety Standards:

   • The Metravi AC-1 complies with relevant safety standards such as CE certification and possibly IEC 61010 (for electrical testing equipment), ensuring it meets safety and performance requirements for voltage testers.

• Voltage Range: 90V to 600V AC

• Display: Digital LCD Display

• Power Supply: Typically 1 x 9V battery or 2 x AAA batteries (depending on model)

• Non-Contact Voltage Detection: Available in some models

• Indicators: LED lights for voltage presence, audible beeping (for voltage detection)

Additional Information:

• Item Code: AC-1
• Delivery Time: READY STOCK
• Packaging Details: 1NOS PACKING

1. Measurement Parameters:

   • pH Measurement: Measures the pH of water, which indicates its acidity or alkalinity. The pH scale ranges from 0 (very acidic) to 14 (very alkaline), with 7 being neutral.

   • Temperature Measurement (Optional): Some models may also include temperature compensation or allow you to measure the temperature of the water to adjust the pH readings accordingly.

2. Measurement Range:

   • pH Range: Typically 0.00 to 14.00 pH.

   • Resolution: Usually displays pH readings with a resolution of 0.01 pH for precision.

   • Accuracy: The accuracy is typically ±0.01 pH for most water quality meters in this class, but this can vary depending on calibration and usage.

3. Calibration:

   • The PH-600 often supports manual or automatic calibration with standard pH buffers (commonly at pH 4.00, 7.00, and 10.00), which helps ensure accurate readings.

   • Some models might allow for one or two-point calibration, where you can adjust the meter using two different buffer solutions for more precise results.

4. LCD Display:

   • Features a clear, easy-to-read LCD display that shows the pH reading in real-time.

   • Some versions may also display temperature readings if the meter includes temperature compensation.

   • Backlight: Many models have a backlit display for use in low-light environments.

5. Electrode:

   • Glass Electrode: Most pH meters, including the PH-600, use a glass electrode (often combined with a reference electrode). The glass electrode is highly sensitive and helps provide accurate measurements.

   • Replaceable Electrode: The pH electrode is typically replaceable, which is useful for long-term use and maintenance.

6. Data Hold Function:

   • The data hold function allows users to freeze the reading on the display for easy documentation, especially when testing water samples in containers or hard-to-reach areas.

7. Portable Design:

   • Compact and lightweight, making it easy to carry and use in the field for water quality testing.

   • Ideal for on-site water testing in various applications like aquaculture, agriculture, environmental monitoring, and industrial processes.

8. Power Supply:

   • Powered by batteries (commonly 4x 1.5V AAA batteries).

   • Automatic power-off function to save battery life when not in use.

9. Durability:

   • Designed for field use, the PH-600 is typically built with a rugged, splash-resistant casing, allowing it to withstand environmental conditions like dust or water splashes.

10. Temperature Compensation:

    • Many pH meters, including the PH-600, offer automatic temperature compensation (ATC), which adjusts the pH readings based on the water temperature. This ensures that the results are accurate even if the temperature fluctuates.

Additional Information:

• Item Code: PH-600
• Delivery Time: READY STOCK
• Packaging Details: 1NOS PACKING

• The Metravi PH-700 is designed to measure pH values within a range of 0 to 14 pH.

• This covers the full spectrum of acidity and alkalinity, from highly acidic solutions (below pH 7) to neutral (pH 7) and alkaline solutions (above pH 7).

• The meter typically offers high accuracy, typically ±0.01 pH, ensuring precise measurements that are crucial for various applications, especially in water quality testing, research, and industrial processes.

• The Metravi PH-700 comes with a large, easy-to-read digital LCD display.

• The display is equipped with backlighting, making it visible in low-light environments.

• The digital readout allows the user to quickly interpret the pH value of the sample, providing clear and immediate results without requiring complex calculations.

• One of the standout features of the PH-700 is its automatic pH calibration.

• 2-point or 3-point calibration: Users can calibrate the meter using standard pH buffer solutions (usually pH 4, pH 7, and pH 10). This ensures high accuracy and consistency across different measurements.

• The calibration process is automatic, which eliminates the need for manual adjustments, reducing the risk of human error and enhancing the reliability of readings.

• Automatic Temperature Compensation (ATC) is another key feature, adjusting the pH readings based on the sample's temperature.

• pH readings can vary with temperature, and the ATC ensures accurate results regardless of the temperature of the sample being tested.

• This feature is especially useful in environments with fluctuating temperatures, such as in aquariums, outdoor water sources, or industrial settings.

• The Metravi PH-700 is built to be water-resistant with an IP67 rating (depending on the model).

  • IP67 means that the meter is dust-tight and can withstand submersion in water up to 1 meter (3.3 feet) for short periods.

• This makes the tester suitable for use in wet or outdoor environments, offering durability and ensuring it won't be damaged by moisture or rain.

• The PH-700 uses a removable and replaceable pH electrode, which is typically glass for accurate measurements.

• Replaceable Electrodes: Over time, electrodes can degrade or lose sensitivity. The ability to replace the electrode ensures that the device remains accurate and functional over extended periods of use.

• The electrode is designed for easy maintenance, with cleaning and storage instructions provided to prolong its life.

• The Metravi PH-700 typically operates on 4 x 1.5V AAA batteries.

• The battery life is generally long-lasting, and many models feature an auto power-off function, which helps save battery life when the meter is not in use.

• Low battery indicator: The meter often includes a visual indication when the battery power is low, ensuring users have time to replace the batteries before usage is affected.

Additional Information:

• Item Code: PH-700
• Delivery Time: READY STOCK
• Packaging Details: 1NOS PACKING

Additional Information:

• Item Code: TQ8800