Have a requirement?
Chat with us
Have a requirement?
Chat with us
Air Pollution Control Equipments
Packed Absorption Tower
Get Latest Price
Packed Tower are scrubbers comprising of solid packing media which increases the surface area enhancing the mass transfer efficiency. The design of the equipment depends on the application and type of gases to be absorbed. This equipment can be effectively availed for the absorption and removal of gases and gaseous pollutants. Specific scrubbing media in liquid phase are used to achieve absorption. Presence of particulate matter can reduce the surface area for mass transfer and decrease the efficiency.
· Features:
o High mass transfer efficiency
o Effective collection efficiency
o Reuse of the absorbed gases and fumes
o Moderate pressure drop
o Low maintenance
Additional Information:
- Delivery Time: 2-3 weeks
View Complete Details
Bag Filter Systems
Get Latest Price
The pulsejet bag filter consists of filtration elements encased in housing. Below this casing is a hopper with a discharge valve, to remove the dust that is collected on the bags. The entire unit is supported from the ground on structural legs. Solenoid valves with a sequential timer are provided for cleaning of the filter bags with required cleaning frequency.
Salient Features
- Highly efficient dust collection with frequent pulse of cleaning air.
- Lower pressure drop design which reduces the operational cost.
- Lower pressure drop of cleaning air due to elimination of bends in pulsing system.
- Effective flushing of dust.
- Optimum design which reduces re-suspension of fine dust.
- Cleans the internal of the filter media to have lower longer term pressure drops.
- The filter media is not flexed as extensively as in the conventional cleaning, thus increasing the media life.
Additional Information:
- Delivery Time: 2-3 weeks
View Complete Details
Cyclones - Multi Cyclone Dust Collector
Get Latest Price
Air containing dust or material in the form of particulates enters the cyclone separator tangentially. The dust or material experiences centrifugal force due to the formation of vortex. This centrifugal force causes impaction of particulates on the walls of cyclone, separating solids from gaseous streams. Cyclone separators are used to remove coarse particulates from the waste stream or to recover material from process air streams.
Salient Features
- No Moving Or Rotating Parts so minimal maintenance
- Engineered for High Separation Efficiency.
- Application based designs for Optimum Performance.
- Small footprint hence requires lesser floor space.
- Sepration Efficiency possible upto 98% for Powder.
- Designed system has minimal pressure drops.
- High eficiency for particles greater than 20 microns.
Multicyclone
Description
Multicyclone is second generation mechanical dust collector after cyclone. It has multiple parallel cyclonic tubes inside the chamber which separates the heavy dust particles from the air stream using. This is used as primary separator to reduce the dust load on the following dust collectors.
Salient Features
- No Moving Or Rotating Parts so No Maintenance
- Different Tube Design For Different Applications
- Replaceable Fabricated/Cast Alloy Tubes to form Multicyclone
Additional Information:
- Delivery Time: 2-3 weeks
View Complete Details
Wet Cyclone Separator
Get Latest Price
Wet Cyclone separator are special equipment capable of working in both dry as well as wet mode of operation. When the dust loading is moderate the equipment can provide effective removal without scrubbing medium. The centrifugal force increases the turbulent interactions between the dust particles and scrubbing medium and thus enhance the removal efficiencies. Water is used as the scrubbing medium and different nozzle arrangements are used for high efficiencies.
· Features:
o High efficiencies as compared to spray tower
o Moderate pressure drop
o Simultaneous gas and particulate removal
o Effective gas-liquid separation
o Does not require a demister
o Quenching of hot air/gases
Additional Information:
- Delivery Time: 2-3 weeks
View Complete Details
Odor Control Systems
Get Latest Price
Volatile Organic Compound Scrubber works on the principle of adsorption. The VOC laden air/gas enters the scrubber and these compounds get adsorbed on the specific sites available on the media. Selection of quality and quantity media depends on the characteristics of volatile organic compounds. The device is compact and there is no secondary water pollution as the equipment works on dry mode of operation.
· Features:
o High mass transfer efficiency
o Low pressure drop
o Low maintenance
o Low media exhaustion rate
Additional Information:
- Delivery Time: 2-3 weeks
View Complete Details
Venturi Scrubbers
Get Latest Price
Venturi scrubbers are high energy scrubbers which have very high efficiencies for removal of particulates from air/ gas stream. The velocity of air increases at the throat of the venturi and this high velocity enhances the atomization of scrubbing medium at the throat. The high velocity also promotes the turbulent interactions and provides very high particulate removal efficiencies. They have very high pressure drops. Gas liquid separation can be achieved by use of a demister or a liquid-air separation tank. Water is generally used as the scrubbing medium.
· Features:
o High Collection Efficiency
o Low Capital Cost and Compact Unit
o Low Maintenance
Additional Information:
- Minimum Order Quantity: 1 Unit
- Delivery Time: 2-3 weeks
View Complete Details
Spray Tower
Get Latest Price
When the air/gas consists of dust particles which may be flammable or create explosion, the control of such dust particles are carried out by availing spray towers. Water is generally used as the scrubbing medium. Equipment consists of multiple spray nozzles which atomize scrubbing medium into fine droplets. Dust particles penetrate into these droplets and are removed from the air/gas streams. Compact unit as compared to other dust collectors. Specific media can help removal of gaseous pollutants along with particulate removal.
· Features:
o Low pressure drop
o Moderate efficiency for fine particles
o Simultaneous gas and solid removal
o Quenching of high temperature gases
Additional Information:
- Minimum Order Quantity: 1 Unit
- Delivery Time: 2-3 weeks
View Complete Details
Explore more categories
need
details












