I R Technology Services Pvt. Ltd.

Model	ZXGP-B2160
Power	1140 W
Brand	Labwit
Alarm	Enabled
Grid Included	2 (max 2/3/4)
Heat Mode	Water Jacket (With Gentle Circulation)
Setting	Digital
Timer	0 - 999 minutes
Volume	160 L
Ambient Temperature Range	+5 to 65 Degree C
Temperature Accuracy	+/- 0.1 Degree C
Temperature Uniformity	+/- 0. 5 Degree C @37 Degree C
Display	LCD
Grid Size	480x495 (mm) (WxD)
Distance Between Grids	126 (mm)
Inner Dimensions	500x500x650 (mm) (WxDxH)
Exterior Dimensions	660x625x1020 (mm) (WxDxH)
Packing Dimensions	780x745 x1190 (mm) (WxDxH)
Net Or Gross Weight	78/105 Kg
Electricity	220-240V 50/60 Hz
Approval	CE, ISO

ZXGP incubators offer an economical incubation method to a variety of micro-organism cultures with high uniformed temperature control. As a standard feature, all incubators have a high-tech microprocessor controller that maintains accurate temperature control (PID) of the chamber in the range of ambient temperature. With a user-friendly control panel allows easy digital setting and fast readout of time and temperature. The processor of our incubators can store up to 9 programs-18 steps-into a “non-volatile” memory. Programs can be used for running multiple "ramp and soak" cycles up to 99 times. Of course the incubators can also be used as a constant (one) temperature incubator.

Features:

• P.I.D. microprocessor ensures the precision of temperature control under both fixed value mode and program mode.
• Fully programmable through the keyboard (9 programs/18 steps).
• Audible and visible alarm on over temperature.
• Password protection against unauthorized access to all settings.
• Non-volatile memory retains preset parameters after an accidental power interruption.
• Large LCD display for easy parameters setting and fast readout.
• Inner glass door provides complete visibility to the chamber.
• Standard 2 grids included

Features of Water Jacket Heating Model :
With a triple wall construction and large volume of water, ZXGP-series water jacketed incubators provide unsurpassed temperature stability and protection against heat loss. The water jacket technology holds the temperature for extended periods of time, which is critical during power failures. Under test conditions, the temperature initially drops at only 1°C per hour, and just 8.5°C in 10 hours, by contrast, on most direct heating models, which comes with 3.4°C and more than 15°C dropping instead.

Model	ZXDP - B2120
Power	300 W
Brand	Labwit
Temperature Range	+5 to 65 Degree C
Alarm	Enabled
Grid Included	2 (max 5)
Heat Mode	Direct Heat (With Gentle Circulation)
Setting	Digital
Electricity	220-240V 50/60 Hz
Inner Dimensions	570x 620 x980 (mm) (WxDxH)
Exterior Dimensions	640x690x1140 (mm) (WxDxH)
Packing Dimensions	570x620x980 (mm) (WxDxH)
Net Weight	51/85 Kg
Approval	CE,ISO
Volume	120 L
Temperature Accuracy	+/- 0.1 Degree C
Temperature Uniformity	+/- 0.5 Degree C @ 37 DegreeC
Timer	0 - 999 minutes
Display	LCD
Grid Size	430x445 (mm) (WxD)
Distance Between Grids	110 mm

ZXDP-series direct heating incubators offer an economical incubation method to a variety of micro-organism cultures. As a standard feature, all incubators have a high-tech microprocessor controller that maintains accurate temperature control (PID) of the chamber in the range of ambient temperature. With an accuracy, a user-friendly sealed control panel allows easy digital setting and fast readout of time and temperature as well as an alarm signal if there is a deviation from set point parameters. The processor of our incubators can store up to 9 programs-18 steps-into a non-volatile memory. Of course the incubators can also be used as a constant (one) temperature incubator.

Features:

• P.I.D. microprocessor ensures the precision of temperature control under both fixed value mode and program mode.
• Audible and visible alarm on over temperature.
• Password protection against unauthorized access to all settings.
• Non-volatile memory retains preset parameters after an accidental power interruption.
• Large LCD display for easy parameters setting and fast readout.
• Inner glass door provides complete visibility to the chamber.

Brand	Labwit
Model	ZXMP-A1230
Power	1600 W
Volume	270 (L)
Temperature Range (C)	4 to 65 Degree
Display	LCD
Timer (min)	0-999
Settings	Digital
Humidity Range (%RH)	40-98
Humidity Accuracy (%RH)	0.1
Alarm	Enabled
Temperature Accuracy	0.1 deg C
Temperature Uniformity	+/- 1.0 @ 37 Degree C
Humidity Uniformity	+/- 5 (%RH)
Grids Included	2 (Max 15)
Grid Size	426 x556 (mm) (WxD)
Inner Dimensions	600x500x700 (mm) (WxDxH)
Exterior Dimensions	740X790X1400 (mm) (WxDxH)
Packing Dimensions	860X910X1570 (mm) (WxDxH)
Net Or Gross Weight	130/180 Kg
Electricity	220 - 240V 50/60 Hz
Approval	CE, ISO

Like all LABWIT equipment, the humidity incubators have been designed to provide one of the highest quality standards of performance with matching microprocessor technology, precise temperature control and humidity control system combining state-of-the-art technology with years of design, quality and manufacturing experience. The ZXMP-series humidity incubators are specialized in a variety of critical experiments, such as analysis of water, BOD tests, incubation of tissue cell, germs and other microorganism, and so on. To achieve this, the LABWIT control electronics is in place to service the precise control requirements of the chambers environment, providing optimum programmable conditions for culture growth.

Features:

• P.I.D. microprocessor ensures the precision of temperature and humidity control under both fixed value mode and program mode.
• The microprocessor is "user friendly" with status indicators, LED display of control parameters, to permit efficient operator entry of data.
• The chamber is humidified by injecting heated water vapour from a reservoir located outside of the chamber. Maintenance of the water tank can be easily performed from the side. The water level in the tank can be checked by looking through the central viewing window.
• Tempered inner glass window provides a clear view of samples in the chamber.
• Sound cooling system with CFC free refrigerant and automatic defrosting system.
• Non-volatile memory retains pre-set parameters in case of power interruption.
• All shelves, shelf supports and guide rails are easily removable and can be autoclaved to remove
• contamination.
• Independent device for over temperature, high current flow and electric leakage.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Model	ZXSD - B1160
Standard Configuration	Built-in printer, Fluorescent Lamp, 50 mm Test Port
Display	LCD
Options	UV Lamp, RS-232 interface
Electricity	220-240V 50/60 Hz
Approval	CE, ISO
Settings	Digital
Timer (min)	0-9999
Door Type	Outer door with observation window, and heat resistance glass inner door
Temperature Range (C)	4 to 65 Degree
Cooling System	Auto-Defrosting, Automated, with R134A Refrigerant
Alarm	Enabled
Brand	Labwit
Temperature Accuracy	0.1 deg C
Temperature Uniformity	+/- 1.0 @ 37 deg C
Grids Included	2 (Max 15)
Grid Size	410x456 (mm) (WxD)
Inner Dimensions	500x500x650 (mm) (WxDxH)
Exterior Dimensions	630x740x1380 (mm) (WxDxH)
Packing Dimensions	700x810x1540 (mm) (WxDxH)
Net Or Gross Weight	98/145 Kg

We are offering Labwit ZXSD - B1160 Economic 160 L Cooled BOD Incubators to our clients.

Model	ZXSP-R0270
Brand	Labwit
Door Type	Single door with high-density insulation
Display	4.3" TFT Touch Screen
Timer (min)	0-9999
Settings	Digital
Temperature Range (C)	-10 to 65 degree
Alarm	Enabled
Temperature Accuracy	0.1 deg C
Temperature Uniformity	+/- 1.0 @ 37 deg C
Grid Size	477x556 (mm) (WxD)
Grids No	2 (Max 18)
Inner Dimensions	600x600x750 (mm) (WxDxH)
Exterior Dimensions	750X 780 X1480 (mm) (WxDxH)
Packing Dimensions	820x850x1640 (mm) (WxDxH)
Net Or Gross Weight	130/180 Kg
Power	950 W
Electricity	220/240 Volt 50/60 Hz
Approval	CE, ISO

The premium low temperature BOD incubators of the ZXSP-series from LABWIT are designed to meet a variety of advanced experimental needs, ranging from BOD determination to incubation of micro-organism cultures, preservation of samples, Drosophila incubation and determination of enzymatic activities. All these applications require precise and constant temperature control. Each model has a wide temperature range from - 10 °C to 65 °C and can be operated at a single user defined temperature, but can also be programmed with up to 9 different temperature segments within a time frame. (18 steps). The (cooling) compressor runs continuously and the control are done through a solenoid valve for more precise temperature control if lower than ambient temperatures are required. Both the interior and exterior are made of robust materials for lifetime operations. The inner chamber is made of high quality #304 stainless steel sheets, with 4 round coved corners. All exposed edges are de-burred to insure no sharp edges. The exterior is cold rolled steel finished with powder coated polyurethane finish, which is resistant to most chemicals and easily cleaned with mild household detergents.

Features:

• Air tight outer door design ensures optimized insulation, achieving best temperature controlling performance under low-temperature setpoint.
• Sound cooling system with CFC free refrigerant and automatic defrosting system ensure long-term operation at low-temperature setpoint without frosting issue.
• Triple safety protections for samples, incubator and environment.
• All electrical components are fully accessible after removing the top-cover
• Standard configurations; forced air circulation, a fluorescent lamp, 50 mm test port and 2 grids, built-in printer.