Jasper Gaskets & Power Projects Private Limited

Jasper Gaskets & Power Projects Private Limited

Perungudi, Chennai, Tamil Nadu
Send SMS
Send E-mail

Ring Joint Gasket

Thank you for the privilege to introduce the services and products offered byJasper Gaskets

We manufacture Ring Joint Gaskets, Spiral Wound Gaskets and Kammprofile Gaskets.


We can give our RTJ in following materials at your expected time:

Soft Iron, Low Carbon Steel, A 105, F 5, F 9, F 11, F 12, F 22, SS 304 / L / H, SS , Titanium Grade 1 / 2 / 5 / 7 / 12, Monel 400, INC 600 / 625 / 800 / 825 / 718, Nickel 200 / 201.

Gasket Shapes :

R Oval / R OCT / RX / BX / Combo Ring Like R45/R46 or RX45/RX46..SRX / SBX
Gaskets as perAPI 17 D Spec. Rubber Coated Gaskets, Teflon Coated Gaskets, PTFE Inserted Gaskets ( PTFE coated is difference and PTFE inserted is different )

Plating:

Zinc Yellow / Zinc White / Nickel / Silver / Gold

Coating :

Teflon-PTFE-XYLON316 / L / H, SS 316 TI, SS 321 / H, SS 347 / H, SS 410 / S, S 31803 / F 51 / 2205. S 32205 / F 60 / 2507, S 31254 / F 44, S 32750 / S 32760, 17-4 PH, Hastalloy C 276, Titanium Grade 1 / 2 / 5 / 7 / 12, Monel 400, INC 600 / 625 / 800 / 825 / 718, Nickel 200 / 201.


Gasket Shapes :

R Oval / R OCT / RX / BX /Combo Ring likeR45/R46 OR RX45/RX46..SRX / SBX
Gaskets as per Api 17 D Spec. Rubber Coated Gaskets, Teflon Coated Gaskets, Ptfe Inserted Gaskets (Ptfe Coated Is Difference And Ptfe Inserted Is Different)

Plating:

Zinc Yellow / Zinc White / Nickel / Silver / Gold

Coating :

Teflon-ptfe-xylon

Request Callback
R Ring Joint Gaskets

  • R Ring Joint Gaskets
  • R Ring Joint Gaskets
  • R Ring Joint Gaskets
  • R Ring Joint Gaskets
  • R Ring Joint Gaskets
  • R Ring Joint Gaskets
  • R Ring Joint Gaskets
  • R Ring Joint Gaskets
Ask For Price

R Ring Joint Gaskets

Get Price
The R-Type ring gasket are found in two shapes, Oval or Octagonal. Both shapes have the same pitch diameter as the flange groove they communicate to. These gaskets are used in pressures up to 10,000 PSI. The octagonal type has a higher sealing co-efficient than the oval, therefore it is the most wanted shape. The oval type is the only gasket that will fit a bottom radiused groove. Both the Gaskets can be used in Flanges with flat bottom v-grooves. OVL and OCT is used as abbreviation for Oval and Octagonal shapes respectively.

Yes! I am interested

Request Callback
IX Seal Ring Gaskets

  • IX Seal Ring Gaskets
  • IX Seal Ring Gaskets
  • IX Seal Ring Gaskets
  • IX Seal Ring Gaskets
  • IX Seal Ring Gaskets
  • IX Seal Ring Gaskets
  • IX Seal Ring Gaskets
  • IX Seal Ring Gaskets
  • IX Seal Ring Gaskets
  • IX Seal Ring Gaskets
  • IX Seal Ring Gaskets
Ask For Price

IX Seal Ring Gaskets

Get Price
The IX-rings are designed and used where the NORSOK CFC (Compact Flange Connections) are in use. The rings come in three different kinds of steel and are coated with PTFE in varying colours in order to distinguish between them. Standard identification NORSOK STANDARD L-005 (NCF5). All markings should be on the inside of the ring.
Yes! I am interested

Request Callback
SRX and SBX Ring Joint Gaskets

  • SRX and SBX Ring Joint Gaskets
  • SRX and SBX Ring Joint Gaskets
  • SRX and SBX Ring Joint Gaskets
  • SRX and SBX Ring Joint Gaskets
  • SRX and SBX Ring Joint Gaskets
  • SRX and SBX Ring Joint Gaskets
  • SRX and SBX Ring Joint Gaskets
  • SRX and SBX Ring Joint Gaskets
  • SRX and SBX Ring Joint Gaskets
  • SRX and SBX Ring Joint Gaskets
  • SRX and SBX Ring Joint Gaskets
Ask For Price

SRX and SBX Ring Joint Gaskets

Get Price
Type SRX and SBX gaskets per API 17D for Subsea Wellhead and Tree Equipment are vented to prevent pressure lock when connections are made up underwater. They have identical measurements to RX and BX ring gaskets with the same number designation, and they will fit the same corresponding connectors. The "S" indicates these gaskets have cross-drilled holes, as fluid entrapment in the ring groove can interfere with proper make up underwater (subsea). With the vent hole, any water trapped between a ring groove bottom and the sealing area of the gasket can escape to the equipment I.D. bore. Material per spec is defined as a corrosion resistant alloy.
Yes! I am interested
Tell us what you
need
Receive seller
details
Seal the deal
Please enter Mobile Number
Invalid Email ID
Please enter full name
Invalid Input

Request Callback
Lens Ring Gasket
Ask For Price

Lens Ring Gasket

Get Price

Lens ring gasket, also known as washer with ball face, is mainly used for the high pressure pipe connections. The primary function of lens ring gasket is to seal. Metal lens gaskets includes metal flat gasket, triangular gasket, double cone ring, C-ring and C type gasket, ring gasket, serrated gasket, wave gasket and hollow o-ring, etc.. Perforated lens ring gasket is used for the flange seal of high pressure pipe. Blind lens ring gasket is used for the blind flange seal of high pressure pipe. The materials of lens ring gasket use the forgings, rolled materials and pipes. Blind lens ring gaskets use the forgings an

It is wide to use the lens ring gaskets to seal in the high pressure pipe connections. Seal faces of lens ring gaskets are ball surface, in contact with conical sealing surface of the pipe, the initial state is in a loop. By the action of the preload force, lens ring gasket has a plastic deformation at the contact point and the loop is into a belt loop, which has the better sealing performance. The contact face is naturally formed by spherical surface and beveled surface, so the gasket is easy for alignment. Lens ring gasket is the forced seal gasket.

Features
  1. 1. Lens ring gasket is applicable for the pipe seal that the pressure isn’t lower than 10MPa.
  2. 2. Lens ring gasket is of line seal, large expansion and contraction, large compensation and easy compact.
  3. 3. Due to contact with flange cone face, it is easy to have the pressing mark. The interchangeability of part is poor.
  4. 4. Lens ring gasket is also pressure energized, as well as the double-cone gasket.
    5. ??The hardness of lens ring gasket must be15~20HB lower than the mating flange face hardness.
Yes! I am interested

Request Callback
Bonnet Seal Ring Gaskets
Ask For Price

Bonnet Seal Ring Gaskets

Get Price

Typical bonnet seal ring is applicable to the flange faces formed by pair of small grooves. Most of the small grooves have two angle faces and one flat bottom. Most of the gaskets have an octagonal cross section, but in some gaskets the small grooves are oval-shaped. The gasket can be fitted into the small groove, but the most are of sufficient size so that the two mating flange faces are separated. If the flanges do not coincide, the pipeline will be leaked during the feeding. Valve bonnet seal ring must be of full load and cannot touch the flange face, which shall cause the front gasket deformation. In addition, if the valve bonnet seal ring is not well aligned, it will occur that one face is sealed and the other face is leaked during the feeding.

Because the levels of both internal and external should be accordance with the design requirements on both sides at the same time, prior art gaskets use face to face contact and cannot provide the effective seal.

Features
  1. 1. Valve bonnet seal ring is the type of mechanical compression, that is to say it is sealed only by the tightening torque of flanged bolt.
  2. 2. Valve bonnet seal ring is used in 6B flanges with standard flanged connections, it has the face seal with good seal performance, but it should have high accuracy.
  3. 3. Valve bonnet seal ring can be reused in the field in the case of the appearance with no damage.
  4. 4. The hardness of valve bonnet seal ring must be15~20HB lower than the mating flange face hardness.
  5. 5. The seal faces of valve bonnet seal ring, including the bevel faces, shouldn’t have the scratches, knock marks, cracks and defects. Its surface roughness should not be larger than Ra1
Yes! I am interested
Tell Us What Are You Looking For?
Please enter Mobile Number
Invalid Email ID
Please enter full name
Please enter product/service name
Invalid Input
Processing...
I agree to the terms and privacy policy
Submit Enquiry

Reach Us

Gmap

Jasper Gaskets & Power Projects Private Limited No. 38-A, 1st Link Road, 1st Main Road, Nehru Nagar, Kottivakkam, Opposite To IGP Engineers, Perungudi,
Chennai-600041, Tamil Nadu, India

Sam Jenifer ( Director Business Development )
Send SMS
Send E-MAIL

Share Us:


Tell us what you
need
Receive seller
details
Seal the deal
Please enter Mobile Number
Invalid Email ID
Please enter full name
Invalid Input
We are here to Help You!
Go Mobile : Follow Us On :
Copyright © 1996-2018 IndiaMART InterMESH Ltd. All rights reserved.