Jay Sales

Jay Sales

4th block, Bengaluru, Karnataka
Send SMS
Send E-mail

How it Works
Tell us what you need by filling in the form
Receive Verified supplier details
Compare Quotations and seal the deal
X
I agree to the terms and privacy policy

Company Factsheet

Nature of Business
Service Provider

Year of Establishment
1981

Products & Services

Request Callback

Photographic Emulsion

Ball Bearing
Our company has been successful in winning appreciation from the clients as one of the most prominent names in the trading of Photographic Emulsion
...more
Get Best Quote
Yes! I am interested
Request Callback

Photo Screen Emulsion

Ball Bearing

Application

Bluecoat 216 Emulsion is used for applying on the sides of the screens for flatbed / table screen printing.

Procedure

  • Take required emulsion in a pot.
  • Apply on all the four sides of the Screens with the help of brush evenly in such a way that it goes into inner-side of the screen.
  • Allow it to dry completely in either sunlight or heater.
...more
Get Best Quote
Yes! I am interested
Request Callback

Nickel Rotary Screens

Ball Bearing
  • Repeat: 640mm
  • Width: 1410mm, 1750mm and 1980mm
  • Mesh: 40, 60, 70, 80, 100, 105, 110, 125 and 155

Rotary Screen Features
Best Quality

  • Better colour distribution
  • Very even surface
  • Precise reproduction
  • Sharper definition
  • Improved nickel elasticity
...more
Get Best Quote
Yes! I am interested
Request Callback

Degreaser Chemicals

Ball Bearing

Application

Degreaser is used for degreasing the Screen before the Screen is coated.

Properties

Due to degreasing effect eyes clothes & skin are to be protected.

Procedure

Apply the degreaser with sponge over the screen & keep it for few minutes. After that wash the screen with water.

Safety

Wear hand gloves, eye protecting glass & protect the cloth.

...more
Get Best Quote
Yes! I am interested
Request Callback
Get Best Quote
Yes! I am interested
Request Callback

Universal Thermoplast Adhesive

BLUECOAT MT 73 is Universal Thermoplast Adhesive suitable for ALL WEATHERS and HOT & COLD TABLES. No need to mix different grades by Trial & Error Method. Hence, it avoids wastage and reduces Inventories by maintaining stock of ONE product.

Application:

  • If previously coated with any adhesive, clean entire blanket with Ethyl Acetate Otherwise Clean the blanket with a solution made by adding 100gms Soda and 100gms Sodium Hydrosulfite to 10 Ltrs of Warm Water.
  • Give TWO uniform coats of BLUECOAT MT 73 using SS Squeezy, ONE in each direction of the table. Dry for 20 Minutes.
  • Give another TWO uniform coats of BLUECOAT MT 73 using SS Squeezy, ONE in each direction of the table.
  • Dry for 2 hours. Table can be used for Printing after 3 hours.

Advantages

  • Tackiness at all working temperatures. Hence, no need of mixing two different grades by trial & error. Avoids wastage & reduce inventories.
  • QUICK DRYING
  • BLUECOAT MT 73 has “SPECIAL MEMORY FOAM” EFFECT. No FRAME MARKS / IMPRESSIONS on coating. It maintains UNIFORM Level.
  • EASY REMOVAL of the fabric after printing.
...more
Get Best Quote
Yes! I am interested
Request Callback

Stripper Chemicals

Application

  • Stripper has been especially designed to remove the cured photo lacquer from the nickel rotary screen, even if polymerization of the photo lacquer has taken place at 180° deg. C, during 2 hours.
  • The great advantage of Stripper is that stripping takes place at room temperature.

Directions for use

  • Pour the Stripper into a Polyethylene stripping tank. The Screen is immersed in the Stripper. After 15-30 minutes the engraving lacquer will become loose. This time will depend on the temperature, at which polymerization was realized and the number of times screen in used. We advise that the correct stripping time is established empirically.
  • After the screen has been taken from the Stripper, any lacquer remaining is sprayed off with water and then the screen is very thoroughly rinsed with water and dried.
  • The effect of the Stripper will slowly decrease. In general it can be stated that, the consumption is 1 / 2 to 1 liter of Stripper per screen. In case of very long stripping time, empty the stripping tank and clean it thoroughly.
...more
Get Best Quote
Yes! I am interested
Request Callback

Guar Gum Based Printing Gum

  • Product: Textile Printing Thickener
  • Appearance: Light to Lemon Yellow Free flowing fine mesh powder.
  • Character: Non-ionic, Chemically modified galactomannan derivative.
  • PH: 8 - 9
  • Rheology: Produce straight and long flowing pseudo-plastic paste. The film is very elastic and pliable. The paste is nearly non adhesive.
  • Stability to bacteria: Stable for minimum one week without any additional preservative.
  • Viscosity: Full viscosity develops at 7% to 8%.
  • Mesh Size: BV/UF has more finer particles than BVU.
  • Solubility: Soluble in cold as well as in hot water. Over night keeping is necessary if dissolved in cold water. With hot water, swelling is faster and elasticity is improved.
...more
Get Best Quote
Yes! I am interested

View All Services ยป

Reach Us

Gmap

Jay Sales No. 299/C, 35th Cross, 9th M ain, Jayanagar 4t h Block, 4th block,
Bengaluru-560011, Karnataka, India

Jay Khona ( Marketing Manager )
Send SMS
Send E-MAIL

Share Us:


We are here to Help You!
Go Mobile : Follow Us On :
Copyright © 1996-2018 IndiaMART InterMESH Ltd. All rights reserved.