Jay Agenciez

A petroleum-based long term indoor/outdoor corrosion preventive wax based coating

CRC Soft Seal seals out moisture and corrosive contaminants by forming a dry, transparent, amber film which is highly resistant to humidity, salt water and salt spray

CRC Soft Seal provides a dry transparent, amber waxy film for heavy protection of parts that will not wash or wipe off even in severe conditions. It is a premium heavy-duty, long-term, indoor/outdoor corrosion inhibitor for machined metal surfaces and assemblies subjected to long periods of storage or adverse shipping conditions. It is highly resistant to humidity, salt water and spray, chemicals and corrosive atmospheres.

CRC Soft Seal is suitable for the protection and storage of electrical circuits and components, heat pump exterior units and condensers, metal parts and assemblies, alloy extrusions, dies and moulds, battery terminals and connectors. It protects for up to 2 years when exposed to severe salt spray conditions.

CRC Soft Seal Features & Benefits

• Seals out moisture and corrosive contaminants
• Forms a dry, transparent, amber film which is highly resistant to humidity, salt water and salt spray
• Never becomes brittle and will not crack
• Will not attack plastic, rubber, paint or insulation material
• Easy re-application over existing film and/or clean surfaces
• Easily removes with CRC Brakleen or mineral spirits
• Withstands 400 hours of salt spray test

CRC Soft Seal Uses

• Electrical circuits and components
• Heat pump exterior units and condensers
• Metal parts and assemblies
• Alloy extrusions
• Dies and moulds
• Battery terminals and connectors

Additional Information:

• Delivery Time: 3-5 Day

CRC Brakleen is a Powerful cleaner/degreaser for brake and clutch parts.

A non-chlorinated solvent blend, formulated to quickly and safely remove brake fluid, grease, oil and other contaminants from brake and clutch parts.

Brakleen helps brakes last longer and perform better.

• CRC Brakleen Effectively removes brake fluid, grease, oil and hardened deposits.
• CRC Brakleen Degreases instantly.
• CRC Brakleen Reduces disc-brake squeal and clutch chatter.
• CRC Brakleen Can be applied without disassembly, saving time and reducing maintenance costs.
• CRC Brakleen Evaporates quickly.
• CRC Brakleen Leaves no residue.
• CRC Brakleen Low surface tension gives excellent penetration and ensures superior dissolving and degreasing properties.
• CRC Brakleen is Stable, non-staining and non-corrosive to metals.
• CRC Brakleen is Safe on most plastics, coatings and rubbers (test prior to use).CRC Brakleen Aerosol is equipped with a 360° (upside-down) spray valve and extension tube for added convenience.
• CRC Brakleen Aerosol is pressurised with non-flammable CO₂ propellant, giving an active product content of over 97%.

Perfect for cleaning and degreasing :

• Brake linings
• Drums
• Cylinders
• Brake shoes
• Disc brake pads
• Discs
• Wedge brakes
• Springs
• Callipers
• Clutch discs
• Equipment
• Parts and tools

Directions :

• CRC Brakleen Spray liberally and allow excess to run off. Air dry or dry with
• absorbent cloth. Repeat if necessary.
• Use extension tube for hard-to-reach areas.
• After application, re-lubricate with CRC 5-56 if necessary.
• Check plastics and rubber compatibility before use. Do not use on sensitive electronics. Use one of CRC's precision cleaners for these applications.
• Use with adequate ventilation. Do not use on energised equipment. Allow to dry thoroughly and vent before reactivating system.

• A safety data sheet (MSDS) according EU directive 93/112 is available for all CRC products.

Additional Information:

• Item Code: Brakeclean
• Delivery Time: Ex Stock
• Packaging Details: 400 ml x 12 pcs

Multi-purpose high temperature ceramic separating and mounting paste.

CRC Metal-Free Paste is a white, metal-free paste, based on high-tech ceramic solid lubricants and matured additives suspended in a mineral/synthetic premium grade stable oil. It is an effective anti-seize formulation for applications from -40°C up to +1.400°C, preventing metal-to-metal contact, seizing, galling and fretting corrosion.

• Contains no free metals
• Reduces friction and wear, even when the base oil has already evaporated
• High pressure and high temperature resistance
• Protects against burning-in, corrosion and seizing
• No galvanic corrosion potential
• Fast and easy mounting of threaded parts
• Facilitates disassembly of all parts exposed to high temperatures, even after prolonged use in corrosive atmospheres
• Stops and prevents disc brake noise and vibration
• Hot and cold water resistant
• Free from lead, copper, nickel, sulphur and their compounds
• Aerosol formulation does not contain chlorinated solvents and uses LPG propellant

• Machines
• Flanges
• Disc brakes
• Cylinder heads
• Threaded parts
• Exhaust screw connections
• Heat exchangers
• Turbines
• Fittings
• Bolts, nuts, screws
• Plugs, shafts, bushings, splines
• Pipe joints

• The surfaces to be treated should be clean, dry and grease-free. Wire-brush scaled parts and clean with an oil-free solvent like CRC Industrial Degreaser.
• A thin, even film should be applied either by spraying or by brushing.
• Assembled parts can slowly be put in motion.
• Avoid mixing with other products.
• Test before use on plastics and rubber.
• Do not use on energised equipment, oxygen systems or in presence of acetylene.
• Use aerosol only in ventilated areas.
• A safety data sheet (MSDS) according EU-directive 93/112 is available for all CRC products.

Additional Information:

• Item Code: Metal-free-paste
• Packaging Details: 300 ml spray can

CRC SP 350 is a heavy-duty indoor corrosion inhibitor providing extended protection for all metal parts and assemblies both in storage and during shipments. Its unique formulation, to resist run-off and flow, easily covers planed surfaces and sharp edges, making it particularly effective on precision machined surfaces.

• Heavy-duty corrosion protection up to 2 years indoors

• Excellent long-term lubricant for metal parts subjected to heavy duty and constant wear

• Thin, non-drying penetrating and protecting film

• Displaces moisture

• Protects equipment and parts in storage, shipment and in process

• Promotes easy start-up

• Suited for all metals and alloys, included copper and brass

• Can be easily removed with solvent cleaners

• Equipped with the 360° (upside-down) spray valve for added convenience

• Pressurised with non-flammable CO₂ propellant

• Active product content of 97 %

• Specifications : NSN 8030-25-100-4662

Final film for completed assemblies

• Protective coating for assemblies in storage, shipment and process

• Precision machined surfaces

• Aircraft faying surfaces

• Seasonal ‘moth balling’ of marine engine blocks, pistons and components

• Protection of cutting tools, workbench tops, fixtures, gears and shafts.

• Maintenance and storage of weapons

• Start-up lubricant for stored machinery

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Packaging Details: 300 ml & 5 ltrs packings

Special sprayable paste which contains a combination of the extremely pressure-resistant solid lubricants molybdenum disulphide (MoS₂ ) and graphite, stabilised in adhesive mineral oil.

Additional Information:

• Item Code: MOs2
• Delivery Time: Ex Stock
• Packaging Details: 400 ml spray Can

CRC Copper Paste is a soft, copper-coloured paste, based on micronised copper powder and synergistic anti-oxydant, anti-corrosion and anti-wear additives suspended in a premium grade stable oil. It is an effective anti-seize formulation, preventing metal-to-metal contact, seizing, galling, and fretting corrosion.

• Reduces friction and wear, even when the base oil has already evaporated.
• High pressure and high temperature resistance.
• Ensures accurate assembly.
• Enables easy disassembly of threaded parts, gaskets and flanges, even after long operational periods.
• Threaded parts remain in good condition and can be re-used.
• Separating film ensures favourable release behaviour of the threaded connections.
• Excellent sealing even in corrosive atmospheres.
• Resistant to hot and cold water.
• Lead-free and nickel-free.
• Aerosol formulation does not contain chlorinated solvents and uses hydrocarbon propellant.

An effective anti-seize lubricant for :

• Bolts, nuts, pins
• Screw connections on hydraulic equipment
• Guides for brakes
• Bushings, fittings
• Brake adjusters
• Spark plugs
• Splines
• To absorb disk brake noise.
• Wheel screws
• Flanges, flange seals
• Pipeline connections
• Exhaust screw connections
• Linkages
• Sliding sleeves / shafts
• Press fits.

• A thin, even film should be applied either by spraying or by brushing.
• Assembled parts (gear teeth, screws, ...) can slowly be put in motion.
• Avoid mixing with other products.
• Test before use on plastics or rubber.
• Do not use on energised equipment, oxygen systems or in presence of acetylene.
• Use aerosol only in ventilated areas.
• A safety data sheet (MSDS) according EU directive 93/112 is available for all CRC products.

Additional Information:

• Item Code: antisieze
• Packaging Details: 300 ml

CRC Anti-Spatter provides a quick, easy way to prevent adherence of spatter to metal surfaces during welding and eliminates the need for chiselling, grinding or wire brushing after welding. It prevents the obstruction of automatic and semi-automatic welding equipment.

Additional Information:

• Item Code: Antispatter
• Delivery Time: 1 Day
• Packaging Details: 400 ml spray can

• Excellent touch-up for welding seams on stainless steel structures.
• Provides a closed durable Coating.
• Unique combination of flexibility and hardness.
• Adheres extremely well to stainless steel surfaces.
• Totally free of lead.
• Quick drying.
• The aerosol uses LPG propellant for controlled spray and Coating properties.

• Industrial vehicles
• Safety equipment
• Piping and couplings
• Containers
• Furniture
• Home and gar den equipment

• Apply to a clean, degreased, dry surface for best results. Remove rust and scale with a wire brush.
• Apply in light, even coats; best results are obtained with 2 lighter rather than 1 heavy coat. Additional coats can be applied after 5 minutes.
• When spraying is finished, clean aerosol valve by turning can upside down and press button until only propellant escapes. If clogging occurs, remove button and clean orifice with a fine wire.
• Do not use on energized equipment. Use in a well ventilated area.
• A safety data sheet (MSDS) according EU directive 93/112 is available for all CRC products.
• Note: For welding purposes it is always better to use a stainless steel alloy with low carbon content such as 304L or 306L. These type of alloys still keep a good natural barrier against corrosion.

Additional Information:

• Item Code: inox200
• Packaging Details: 12 pcs

CRC ALU HT is a high temperature paint based on silicone resins and active aluminium pigments.Alu H.T. is designed to build a hard lasting finish that will not burn off, chip or peel at high temperatures.

Additional Information:

• Item Code: Aluminum-Paint
• Delivery Time: 1 Day
• Packaging Details: 12 pcs

CRC Hand cleaner is formulated to meet the tough needs of the industrial professional, with hand care as the primary objective. It is based on mild hydrocarbon solvents and biodegradable surfactants. CRC Handcleaner can be used without water and is ideal when working inside or outside where there is no easy access to wash facilities.

• Removes the most stubborn dirt and grime
• Super effective on grease, common paints, ink, glue cements, bitumen, carbon and many other chemical compounds
• Can be used with or without water.
• Quick cleaning capacity
• Contains lanolin to condition the skin
• Pleasant perfume odour
• Contains no abrasives
• Leaves the hands with a smooth soft feel
• No disposal problems

• Oils and greases
• Stains and grime
• Cement and adhesives
• Bitumen and tar
• Common paints and inks

Out-cleans soaps:

• In industrial plants
• In mines
• At farms
• At construction sites
• At home

• Before use, do not wet hands.
• Apply sufficient cleaner (about a teaspoonful) onto dry, soiled hands.
• Rub well until completely liquefied and all soiling is loosened.
• Just wipe off with paper towel or cloth, or rinse off with water.
• Dry hands properly.Avoid eye contact. Keep out of reach of children.
• A safety data sheet according EU directive 93/112 is available for all CRC products.

Additional Information:

• Packaging Details: 2.5 kg packings

An innovative solvent blend that contains no chlorinated solvents and no ozone-depleting components. CRC's Industrial Degreaser is excellent for use where rapid turnaround is necessary and low flash point solvents can be used. Dissolves and removes greases, oils, lubricants, adhesives and contaminants from equipment, machinery, motors and metal parts. Especially formulated for degreasing electric motors; the common coating types used on electric windings are not attacked.

• Cuts through dirt, penetrates quickly under it.
• Attacks encrusted residues.
• Fast evaporation to minimize downtime.
• Easy "in place" cleaning.
• Leaves no residues.
• Non-corrosive and non-staining.
• Safe on most plastics, coatings and rubbers (test prior to use).Low odor.
• Aerosol is equipped with the 360° (upside-down) spray valve and extension tube for added
• convenience.
• Aerosol is pressurized with non-flammable CO₂ propellant, giving an active product content of over
• 97%.
• Authorized by USDA for use in the food industry, according K1, K2.

• Electric motors
• Pumps
• Generators
• Bearings
• Air tools
• Mechanical brakes and clutches
• Chains
• Sprockets
• Wire ropes
• Dies
• Moulds
• Air conditioners and compressors
• Fork lift trucks
• Material handling equipment
• General degreasing and oil removal.

• Apply liberally and allow excess to run off. Air dry or dry with absorbent cloth. Repeat if necessary.
• Use extension tube for hard-to-reach areas.
• In dipping applications, agitation accelerates cleaning. Dip tank should be covered when not in use to avoid undue evaporation.
• May also be used by wiping with a clean rag or brushing.
• Check solvent compatibility for your application before use. If in doubt, test a small area or call the manufacturer of the equipment. Do not use on sensitive electronic equipment.
• Use with adequate ventilation. Do not use on energized equipment. Allow drying thoroughly and venting before reactivating system.
• A safety data sheet (MSDS) according EU directive 93/112 is available for all CRC products.
• After cleaning, use CRC 3-36 for protection and lubrication.

Additional Information:

• Item Code: Fast-Dry-Degreaser
• Packaging Details: 400 ml spray can

CRC Alu HT high temperature paint based on silicone resins and active aluminium pigments. Alu H.T. is designed to build a hard lasting finish that will not burn off, chip or peel at high temperatures.

• High thermal stability: resists temperatures up to 600°C.
• Excellent coverage.
• High durability.
• Quick drying at room temperature.
• Very good resistance to temperature fluctuations.
• Good weather stability. Although some loss of gloss can be noticed after extended exposure.
• Totally lead and chromate free.
• No chlorinated and no aromatic solvents.
• Aerosols use dimethylether (DME) propellant for controlled application and film properties.

• Stove pipes
• Stoves
• Heaters
• Kilns
• Incinerators
• Chimneys
• Exhaust manifolds.
• Headers
• Engines
• Ovens
• Steam pipes

• Shake aerosol can very well for at least one minute after agitator ball is free. Stir or mix bulk product well to
• obtain a homogeneous dispersion. Repeat frequently while using.
• Apply to a clean, degreased, dry surface for best results. Remove rust and scale with a wire brush.
• Apply in light, even coats; best results are obtained with 2 lighter rather than 1 heavy coat. Additional coats can be applied after 15-30 minutes.
• Complete curing occurs during use, typically after 1 h @ 200°C or 45 min. @ 250°C.
• When spraying is finished, clean aerosol valve by turning can upside down and pressing button until only propellant escapes. If clogging occurs, remove button and clean orifice with fine wire.
• Do not use on energised equipment. Use in well ventilated area.
• A safety data sheet (MSDS) according EU directive 93/112 is available for all CRC products.

Additional Information:

• Item Code: ALU-HT
• Packaging Details: 400 ml Spray Can

CRC Rust Remover is a phosphoric acid based concentrate used to remove rust and to clean metal surfaces. It cleans tarnish, oxidation, stains, fingerprints and scale from iron, steel, copper, brass and aluminium.

• Excellent wetting capacity on both ferrous and non-ferrous metals.

• Contains an inhibitor to reduce the attack of the metal surface and to prevent the formation of hydrogen.

• Economical concentrate.

• Can be diluted with water to any concentration needed (see Directions for detailed information).

• Specifications : meets the performance requirements of Mil-C-10578 (type III).

• Rust and scale removal from : ferrous metals non-ferrous metals

• Oxidation and stains removal from : aluminium, copper, brass, Metals preparation prior to painting

• Cleaning of in-process parts and assemblies, sheet metal

• Restoration of rusted parts

• Removal of metal and rust stains from porous materials.

• Heavy rust and scale (ferrous metals) : dilute concentrate with 3 parts water. Metal should be immersed 20 minutes to 1 hour. Remove and rinse metal with water and treat immediately with CRC 3-36 for water displacement and corrosion protection.

• Heavy corrosion (non-ferrous) : dilute concentrate with 7 to 10 parts water. Metal should be immersed 20 minutes to 1 hour. Periodically check non-ferrous metals. Remove and rinse with water. Treat immediately with CRC 3-36 for water displacement and corrosion protection.

• As a metal cleaner (ferrous and non-ferrous) : dilute concentrate with 15 to 20 parts water. Metal may be immersed, brushed or wiped until the desired brightness is obtained. Rinse with water and treat immediately with CRC 3-36 for water displacement and corrosion protection.

   

• Quicker results are obtained by prior removal of oil and grease, using CRC Industrial Degreaser or CRC Fast Dry Degreaser.

• CRC Rust Remover is mildly acidic; therefore, reasonable care should be taken. Rubber gloves and protective goggles are recommended.

• Equipment used must be made of acid resisting material such as stainless steel, wood, rubber, plastic, glass or ceramic.

• A safety data sheet according EU directive 93/112 is available for all CRC products.

Additional Information:

• Item Code: rust-remover
• Packaging Details: 20 ltrs pack

A fast drying, powerful degreasing solvent blend free of 1,1,1-trichloroethane or other chlorinated solvents. Fast Dry Degreaser penetrates quickly and cuts through dirt, grime and contaminants for improved operation of mechanical equipment. Enhances overall performance. Designed for applications where flammable solvents can be used.

Additional Information:

• Item Code: fast-dry-degreaser
• Delivery Time: 1
• Packaging Details: 400 ml x 12 nos

Super Cut is a Non-chlorinated high performance cutting lubricant.

CRC Supercut is a blend of highly refined base oils and synthetic additives, designed to meet the most stringent requirements for both ferrous and non-ferrous metals (stainless steel, aluminium, brass, ...). The additives create a strong film that can withstand extreme pressure to increase tool life and ease cutting.

A superior cutting lubricant for use on all types of metal, including brass, copper and aluminium :
Gear cutters
Broaches
Grinders
Drilling and boring operations
Tapping
Threading
Drawing
Forming
Stamping
Reaming
Sawing.

Directions for using Crc Super Cut :
Shake well before use.
Apply precisely on area to be treated; re-apply frequently to ensure a continuous product film for wear protection and heat removal.
Clean treated area with CRC Industrial Degreaser or CRC Fast Dry Degreaser and protect with CRC 3-36 or SP 350 if necessary.
A safety data sheet according EU directive 93/112 is available for all CRC products.

Additional Information:

• Item Code: supercut
• Delivery Time: Ex Stock
• Packaging Details: 12 pc x 300 ml

Coolant for electrical and electronic use. CRC Minus 50 is a non-flammable, inert dry coolant spray for maintenance, trouble shooting and repair. Used to cool down parts and components to temperatures below 0°C to a minimum of -50°C; the tracking of intermittent faults, the detection of hairline cracks, and the locating of defective components becomes easier.

Note :
With sensitive or stressed plastic parts, the thermal stress induced by strong local cooling must be considered.

Additional Information:

• Item Code: MINUS-50
• Pay Mode Terms: T/T (Bank Transfer)
• Delivery Time: 1 Day
• Packaging Details: 200 ml spray can

Concentrated biodegradable, industrial strength water-based cleaner/degreaser.

An exceptional multi-purpose cleaner, containing a blend of synthetic and natural surface-active components, for general industrial maintenance. Authorised for use on food processing and packaging equipment: as a floor and wall cleaner; in inedible product processing, non-processing and exterior areas. A non-flammable, non-abrasive formula to be used for thousands of cleaning applications. CRC Complex Blue is economical to use because it can be diluted to meet all cleaning and degreasing needs.

• Authorised by USDA - class A4 and C1 for use in food industry.
• “Readily” biodegradable per OECD 301B.
• Quickly penetrates, removes grease, oil, grime and tough stains from any washable surface.
• Effective in both cold and warm water.
• Excellent for use in pressure washer, ultrasonic and steam cleaning equipment.
• Concentrated for convenience and economy.
• Can be diluted up to 1:100 to provide a single product for all cleaning needs.
• Contains no ammonia, chlorinated or petroleum solvents.
• Free of phosphate, EDTA and nonylphenoletoxylate.
• Safe on all metals.
• Safe on plastics, if rinsed after application.

• Machinery cleaning
• Equipment and parts cleaning
• Pressure washer
• Ultrasonic cleaning
• Steam cleaning
• Hard surfaces and fabrics
• Building maintenance
• Marine maintenance
• General cleaning and degreasing
• Driveway, floor cleaning
• Stainless steel, glass, counters
• Automobiles, vans, forklifts, trailers
• ble for all CRC products.

Additional Information:

• Item Code: BLUE
• Packaging Details: 750 ml and 20 ltrs