X

Jenshri India Pvt. Ltd.

Chandni Chowk, New Delhi, Delhi

| GST  07AABCJ0838K1ZJ

is a member of IndiaMART

| Verified Supplier

|

★★★★★
★★★★★
View Mobile Number 59% Response Rate

Our Products

+View All

Other Modules

Other Modules

TP4056 1A Lipo Battery Charging Board Micro USB
  • TP4056 1A Lipo Battery Charging Board Micro USB
  • TP4056 1A Lipo Battery Charging Board Micro USB
Interested in this product?
Get Best Quote
Model Name/NumberTP4056L

  • Input voltage : 4.5V ~ 5.5V.
  • Input Interface: Micro USB port.
  • Charging method: linear charge.
  • A full charge voltage: 4.2V.
  • Power: 4.2 w.
  • Charging accuracy: 1.5%.
  • Operating Temperature: -10 to +85C
  • Charging indicator: Blue LED charging, Red LED full
  • Charging indicator: RED LED charging, BLUE LED full Charged
  • Charge Current: 1A (default), modify the onboard resistor to adjust the charging current according to the table below.
  • Use mature charging chip TP4056 for simple peripheral circuits, good protection performance, and high charging accuracy.
  • Fully machinery automated processing, all patch parts manufacturing.
  • Charging current can be adjusted by just changing the circuit boards fixed resistors. It can change the output to the 100mA-1000mA, very conveniently.

View Complete Details

Yes, I am interested!

Arduino UNO R3
  • Arduino UNO R3
  • Arduino UNO R3
Interested in this product?
Get Best Quote

Arduino UNO R3

Rs 390 / PieceGet Latest Price

Model Name/NumberUNOR3

  • ATmega328 micro controller
  • Input voltage - 7-12V
  • 14 Digital I/O Pins (6 PWM outputs)
  • 6 Analog Inputs
  • 32k Flash Memory
  • 16Mhz Clock Speed

View Complete Details

Yes, I am interested!

Arduino Nano V3.0
Interested in this product?
Get Best Quote

Arduino Nano V3.0

Rs 230 / PieceGet Latest Price

Model Name/NumberANANO

  • Mini Nano V3.0 ATmega328P Microcontroller Board w/USB Cable For Arduino
  • Microcontroller ATmega328P
  • Operating Voltage (logic level) 5 V
  • Input Voltage (recommended) 7V-12V
  • Digital I/O Pins 14 (of which 6 provide PWM output)
  • Flash Memory 32 KB (ATmega328) of which 2 KB used by 

View Complete Details

Yes, I am interested!

Pro Mini-Atmega 328P 5V/16M
Interested in this product?
Get Best Quote

Pro Mini-Atmega 328P 5V/16M

Rs 185 / PieceGet Latest Price

Model Name/NumberAPMINI

  • Circuit Operating Voltage: 5V
  • Clock frequency: 16MHz.
  • Digital I/O Pins: 14
  • 8 analog input port: A0 ~ A7.
  • A pair of TTL level serial port transceiver : RX / TX.
  • 6 PWM port: D3, D5, D6, D9, D10, D11.
  • Use For Atmel Atmega328P-AU microcontroller.
  • Support serial download.
  • Support 9V battery.
  • Package Includes :
  • 1 x Pro mini 5v/16mHZ compatible with arduino

View Complete Details

Yes, I am interested!

Digital Amplifier Board PAM8403 2X3W Class D
  • Digital Amplifier Board PAM8403 2X3W Class D
  • Digital Amplifier Board PAM8403 2X3W Class D
  • Digital Amplifier Board PAM8403 2X3W Class D
  • Digital Amplifier Board PAM8403 2X3W Class D
  • Digital Amplifier Board PAM8403 2X3W Class D
  • Digital Amplifier Board PAM8403 2X3W Class D
Interested in this product?
Get Best Quote
Model Name/NumberP8403

  • Dual channel stereo output 3 w + 3 w power Class D
  • Works with 2.5V-5v power supply
  • High amplification efficiency 85%
  • can directly drive 4 O/8 O small speakers
  • Good sound quality  & noise suppression
  • Unique without LC filter class D digital power board
  • Can use computer USB power supply directly
  • Small Size, 1.85 x 2.11 cm  can easily fit in a variety of products

View Complete Details

Yes, I am interested!

LM2596S DC-DC Step- Down Power Supply Module
  • LM2596S DC-DC Step- Down Power Supply Module
  • LM2596S DC-DC Step- Down Power Supply Module
  • LM2596S DC-DC Step- Down Power Supply Module
  • LM2596S DC-DC Step- Down Power Supply Module
  • LM2596S DC-DC Step- Down Power Supply Module
Interested in this product?
Get Best Quote
Model Name/NumberLM2596

  • Non-isolated step-down (BUCK) switching regulator.
  • Short circuit protection: Current limiting, self-recovery
  • Potentiometer adjustment direction is as Clockwise (increase) and Anti-clockwise (decrease)
  • Non-synchronous rectification
  • Conversion efficiency : 92% (highest)
  • Switching frequency: 15KHz
  • Outpur ripple: 30mA9 maximum
  • Load Regulation:  0.5%
  • Voltage Regulation:  4.75-35V
  • Outpur Voltage : 1.25-26V (Adjustable)
  • DC-DC Buck Converter Step Down Module LM2596 Power Supply is a step-down (buck) switching regulator, capable of driving a 3-A load with excellent line and load regulation.
  • These devices are available in fixed output version. 


Additional Information:

  • Item Code: LM2596

View Complete Details

Yes, I am interested!

XL6009 DC-DC Booster Step-Up Module
Interested in this product?
Get Best Quote

XL6009 DC-DC Booster Step-Up Module

Rs 75 / PieceGet Latest Price

Model Name/NumberXL6009

  • The performance is much higher than LM2577.
  • Non-isolated Boost converter.
  • It has a non-synchronous rectifier.
  • Small and Handy voltage regulator module.
  • This XL6009 DC  DC Step-up converter module is a non-isolated step-up (boost) voltage converter featuring adjustable output voltage and high efficiency.

View Complete Details

Yes, I am interested!

3-Series 12V 18650 PCM 11.1V 12.6V 12.6V 15 NA368
  • 3-Series 12V 18650 PCM 11.1V 12.6V 12.6V 15 NA368
  • 3-Series 12V 18650 PCM 11.1V 12.6V 12.6V 15 NA368
  • 3-Series 12V 18650 PCM 11.1V 12.6V 12.6V 15 NA368
  • 3-Series 12V 18650 PCM 11.1V 12.6V 12.6V 15 NA368
  • 3-Series 12V 18650 PCM 11.1V 12.6V 12.6V 15 NA368
Interested in this product?
Get Best Quote
Model Name/NumberBP310

  • Three series of lithium battery protection board.
  • Automatically cancel protection after protection conditions restore.
  • With the function of overcharge protection, over discharge protection, short circuit protection, over-current protection.
  • Suitable for lithium battery pack of 11.1V, 12V, 12.6V.
  • Quiescent current < 30uA, so power consumption is small.
  • Higher than 3A current discharge product, the discharge rate of battery discharge is above 3C.

View Complete Details

Yes, I am interested!

ZB2L3 18650 Battery Capacity Tester Eternal Load Discharge Type 1.2-12V
  • ZB2L3 18650 Battery Capacity Tester Eternal Load Discharge Type 1.2-12V
  • ZB2L3 18650 Battery Capacity Tester Eternal Load Discharge Type 1.2-12V
  • ZB2L3 18650 Battery Capacity Tester Eternal Load Discharge Type 1.2-12V
Interested in this product?
Get Best Quote
Model Name/NumberZB2L3

  • Power supply voltage: DC 4.5 - 6V
  • Operating current: Less than 70mA
  • Discharge voltage: 1.00V - 15.00V, 0.01V resolution
  • Power supply voltage: DC 4.5 - 6V (micro USB connector)
  • Operating current: Less than 70mA
  • Discharge voltage: 1.00V - 15.00V, 0.01V resolution
  • Termination voltage range: 0.5 - 11.0V
  • Supported current: Maximum 3.000A, 0.001A resolution
  • Maximum voltage measurement error: 1% + 0.02V
  • Maximum current measurement error: 1.5% +- 0.008A
  • Board size: 50 x 37mm
  • Finished size: 50 x 37 x 17mm (L x W x H maximum position size, contains copper foot height)
  • Board net weight: 28g (including pillars)
  • Resistor weight: about 50g (including cable)

View Complete Details

Yes, I am interested!

AT24C32 IIC Module Precision RTC NA041
Interested in this product?
Get Best Quote

AT24C32 IIC Module Precision RTC NA041

Rs 99 / PieceGet Latest Price

Model Name/NumberDS3231

  • DS3231 AT24C32 IIC Precision RTC Real Time Clock Memory Module For Arduino - NA041
  • 1 mm Size: 38 mm (length) mm * 22 mm (W) mm * 14 mm (height)
  • Weight: 8 g
  • Operating voltage: 3.3-5. 5 V
  • Clock chip: high precision clock chip DS3231
  • Accuracy 5 hours: range 0-40, accuracy 2ppm, the error was about 1 minute
  • Calendar alarm clocks with two
  • Programmable square waves
  • Hours real time generator of seconds, minutes, hours, day, date, month and year dates and provide valid up to year 2100 leap year compensation.
  • Chip Temperature sensor is supplied with an accuracy of 3 
  • Memory chips: AT24C32 (32 K capacity)
  • IIC bus interface, maximum transmission speed 400 kHz (operating voltage 5 AT)
  • Can be cascaded with another IIC device, 24C32 addresses can be shortened A0 / A1 / A2 change the default address is 0x57
  • With a LIR2032 battery, to ensure the system after a power failure, moving hours any physical normal


Additional Information:

  • Item Code: DS3231

View Complete Details

Yes, I am interested!

Active Buzzer Module AB011
  • Active Buzzer Module AB011
  • Active Buzzer Module AB011
  • Active Buzzer Module AB011
  • Active Buzzer Module AB011
  • Active Buzzer Module AB011
  • Active Buzzer Module AB011
  • Active Buzzer Module AB011
Interested in this product?
Get Best Quote

Active Buzzer Module AB011

Rs 29 / PieceGet Latest Price

Model Name/NumberAB011

  • Passive Buzzer Module is a built-in construction of digital transducers, DC energy provides, extensively utilized in computer systems, printers, copiers, alarms, digital toys, car digital apparatus, phones, timers and different digital electronics projects for Alert sound.
  • Operating Voltage : 1.5 ~ 15V DC
  • Working Current: Less than 25mA
  • Material: Plastic
  • Tone Generation Range : 1.5 ~ 2.5kHz
  • Dimensions (LxWxH):  26 x 15 x 11 mm

View Complete Details

Yes, I am interested!

AT24C32 IIC Module Precision RTC NA041
Interested in this product?
Get Best Quote

AT24C32 IIC Module Precision RTC NA041

Rs 100 / PieceGet Latest Price

Model Name/NumberDS3231

  • DS3231 AT24C32 IIC Precision RTC Real Time Clock Memory Module For Arduino - NA041
  • 1 mm Size: 38 mm (length) mm * 22 mm (W) mm * 14 mm (height)
  • Weight: 8 g
  • Operating voltage: 3.3-5. 5 V
  • Clock chip: high precision clock chip DS3231
  • Accuracy 5 hours: range 0-40 , accuracy 2ppm, the error was about 1 minute
  • Calendar alarm clocks with two
  • Programmable square waves
  • Hours real time generator of seconds, minutes, hours, day, date, month and year dates and provide valid up to year 2100 leap year compensation.
  • Chip Temperature sensor is supplied with an accuracy of +- 3 
  • Memory chips: AT24C32 (32 K capacity)
  • IIC bus interface, maximum transmission speed 400 kHz (operating voltage 5 AT)
  • Can be cascaded with another IIC device, 24C32 addresses can be shortened A0 / A1 / A2 change the default address is 0x57
  • With a LIR2032 battery, to ensure the system after a power failure, moving hours any physical normal

View Complete Details

Yes, I am interested!

Green Rotary Encoder Module For Arduino
Interested in this product?
Get Best Quote

Green Rotary Encoder Module For Arduino

Rs 45 / PieceGet Latest Price

Model Name/NumberAB156

  • A 360 Degree Rotary Encoder is a Bread Board Friendly extremely precise module that provides an indication of how much the knob has been rotated AND what direction it is rotating in.
  • It is an incremental electro-mechanical device that converts the angular position or motion of a shaft or axle to digital code.
  • The output of incremental encoders provides information about the motion of the shaft, which is typically further processed in processor / controllers into information such as speed, distance, and position. 
  • It’s a great device for stepper and servo motor control.  You could also use it to control devices like digital potentiometers.
  • Incremental Encoder
  • Supply Voltage: 3-5V
  • Left/Right rotary output pulse, each circle with 20 pulse
  • Built in 10k resistor
  • Cycles per revolution (CPR): 20

View Complete Details

Yes, I am interested!

16bit Analog Digital Converter Adc Module
Interested in this product?
Get Best Quote

16bit Analog Digital Converter Adc Module

Rs 170 / PieceGet Latest Price

Model Name/NumberADS1115

  • The ADS1115 is a 16-bit high precision, 860 samples/second analog to digital converter which interfaces though I2C.
  • This ADC can be configured as 4 single-ended input channels or 2 differential channels. There is a programmable gain amplifier built in which can amplify up to 16 times the signal. 
  • Operating Voltage: 2 to 5.5V
  • Channel: 4 single-ended input or 2 differential input
  • Channel Input Voltage: 0 to VDD
  • Bit Rate: 16 bit
  • Programmable Data Rate: 8 to 860sps
  • Interface: I2C

View Complete Details

Yes, I am interested!

Micro SD Card Mini T/F Card Module
Interested in this product?
Get Best Quote

Micro SD Card Mini T/F Card Module

Rs 38 / PieceGet Latest Price

Model Name/NumberAA115

  • Power supply: 4.5V  5.5V, 3.3V voltage regulator circuit board
  • Positioning holes: 4 M2 screws positioning hole diameter of 2.2mm
  • Control Interface: GND, VCC, MISO, MOSI, SCK, CS
  • Size: 45 x 28mm
  • Net weight: 6g

View Complete Details

Yes, I am interested!

Bread Board Power Supply 3.3V/5V
Interested in this product?
Get Best Quote

Bread Board Power Supply 3.3V/5V

Rs 40 / PieceGet Latest Price

Model Name/NumberMB102

  • Breadboard power supply module, compatible with 5V, 3.3V.
  • Apply to MB102 breadboard
  • Input voltage: 6.5-12 V (DC) or USB power supply
  • Output voltage: 3.3V/5V can switch over
  • Maximum output current: <700 ma
  • Fluctuation two road independent control can switch over to 0 V, 3.3 V, 5 V
  • On-board two groups of 3.3V, 5V DC output plug pin, convenient external lead use.

View Complete Details

Yes, I am interested!

MT8870 DTMF Speech Decoding Module
Interested in this product?
Get Best Quote

MT8870 DTMF Speech Decoding Module

Rs 100 / PieceGet Latest Price

Model Name/NumberMT8870

  • Working voltage: 5V
  • Power Consumption: 500MW(MAX)r: 500 mw (MAX)
  • On-board voice input interface
  • On-board LED, it is very convenient to check the output state.
  • Onboard 5 x LED indicators for easy viewing output state
  • Operating Temperature : -40-+85 °C
  • IO Drive : Current Maximum 10mA.
  • PCB Size : 25.4x25.4MM
  • This decoding module is for mobile and fixed telephone voice dialing decoding function
  • Designed specifically for ARDUINO Board. Can also be used for other MCUs(AVR PIC MSP430 STM32 ARM7/9/10/11 FPGA/CPLD)
  • Low power consumption
  • Internal gain setting amplifier
  • Onboard 3.5mm input interface
  • 5 Channel interface
  • On-board MT8870 frequency decoder chip
  • Does not require external circuits or wiring, it can be inserted directly into the UNO/MEGA2560/DUE board to use.
  • 12-Digital outputs decode mobile and fixed telephone keys (0-9, * #). Also, another 4 Digital output(ABCD) can use “DTMF Dial” for Software control.


Additional Information:

  • Item Code: MT8870

View Complete Details

Yes, I am interested!

Green Rotary Encoder Module For Arodunio
Interested in this product?
Get Best Quote

Green Rotary Encoder Module For Arodunio

Rs 45 / PieceGet Latest Price

Model Name/NumberAB156

  • A 360 Degree Rotary Encoder is a Bread Board Friendly extremely precise module that provides an indication of how much the knob has been rotated AND what direction it is rotating in.
  • It is an incremental electro-mechanical device that converts the angular position or motion of a shaft or axle to digital code.
  • The output of incremental encoders provides information about the motion of the shaft, which is typically further processed in processor / controllers into information such as speed, distance, and position. 
  • It’s a great device for stepper and servo motor control.  You could also use it to control devices like digital potentiometers.
  • Incremental Encoder
  • Supply Voltage: 3-5V
  • Left/Right rotary output pulse, each circle with 20 pulse
  • Built in 10k resistor
  • Cycles per revolution (CPR): 20

View Complete Details

Yes, I am interested!

PS2 Game JoyStick Module
Interested in this product?
Get Best Quote

PS2 Game JoyStick Module

Rs 35 / PieceGet Latest Price

Model Name/NumberAB001

  • 2.54mm pin interface leads
  • Long service life and stable performance
  • Standard interface and electronic building blocks
  • Widely use in Arduino DIY projects
  • Cross rocker as a two-way 10K resistor, with the rocker in a different direction.
  • Dimensions: 40 x 27 x 15 (LxWxH) mm.
  • Weight: 10gm (without Hat).
  • 2.54mm pin interface leads.
  • Operating Voltage: 5V.
  • Long service life and stable performance.
  • Standard interface and electronic building blocks.
  • Widely use in Arduino DIY projects.

View Complete Details

Yes, I am interested!

DC 12V Water Air Inlet Flow Switch 1/2\"
Interested in this product?
Get Best Quote

DC 12V Water Air Inlet Flow Switch 1/2"

Rs 225 / PieceGet Latest Price

Model Name/NumberSVALVE

  • A solenoid valve is an electromechanically operated valve. The valve is controlled by an electric current through a solenoid: in the case of a two-port valve the flow is switched on or off; in the case of a three-port valve, the outflow is switched between the two outlet ports.
  • Inlet and outlet: hose barbs for 1/2" (outer diameter) hose
  • Pressure: 0.02- 0.8Mpa
  • Max fluid temperature: 100°C
  • Operation mode: normally closed
  • Valve type: diaphragm (operated by Servo)
  • Usage: water and low viscosity fluids
  • Product Dimension: 78mm x 60mm
  • The inner diameter: 13.5mm
  • Four external diameter of thread: 20mm
  • A solenoid valve is an electromechanically operated valve. The valve is controlled by an electric current through a solenoid: in the case of a two-port valve the flow is switched on or off; in the case of a three-port valve, the outflow is switched between the two outlet ports.

View Complete Details

Yes, I am interested!

USB AVR Programmer Down Loader Cable
Interested in this product?
Get Best Quote

USB AVR Programmer Down Loader Cable

Rs 115 / PieceGet Latest Price

Model Name/NumberAVRPU

  • 3.3V / 5V USBASP USBISP AVR Programmer Downloader USB ISP ASP ATMEGA8 ATMEGA128 Support Win7 64K Over-Current Protection Function With Download Cable
  • The onboard ATMega8 chip (L)
  • The onboard over - current protection
  • The target board support 5 V and 3.3 V power supply


Additional Information:

  • Item Code: AVRPU

View Complete Details

Yes, I am interested!

3D Printer Parts Mechanical End Stop
Interested in this product?
Get Best Quote

3D Printer Parts Mechanical End Stop

Rs 35 / PieceGet Latest Price

Model Name/NumberRAMES

  • CNC 3D Printer Mech Endstop Switch uses a lever switch to detect when it is activated. The switch is wired up so that when activated,
  • it pulls the signal to LOW. There is also an LED on the board that will light up when the switch is activated.
  • It uses a standard 4 pin 100″ pitch header and accepts a standard, old-style CD-ROM audio connector cable.
  • The mechanical endstop is a simple solution to a simple problem. We want to be able to detect when an X/Y/Z stage has reached its minimum or maximum.
  • Instead of messing with flags or complicated light beam interruption, we use a mechanical switch.
  • If we place the switch in the path of the stage, then the stage itself will simply close the switch when it moves against it.
  • Other than properly positioning the switch, we do not need to modify the stage at all. If you’re worried about reliability, you can sleep well at night.
  • The switches we use are rated for 1 million operations before failure.
  • Wire type: 22AWG
  • Working voltage: 300V
  • Working Current: 2A
  • Temperature resistance: 80° C
  • Cable length: 70cm

View Complete Details

Yes, I am interested!

Max 3232 DB9 RS232 Converter
  • Max 3232 DB9 RS232 Converter
  • Max 3232 DB9 RS232 Converter
  • Max 3232 DB9 RS232 Converter
Interested in this product?
Get Best Quote

Max 3232 DB9 RS232 Converter

Rs 45 / PieceGet Latest Price

Model Name/NumberM3232

  • The RS232 To TTL Converter Module is widely used in radio modifications, cell phone Flash, XBOX360 Flash detection, GPS, car, DVD Flash, HDD repair, set-top box upgrade.
  • Can be used to download MCU types:
  • STC single-chip microcomputer
  • STM32 microcontroller
  • NXP microcontroller
  • Renesas MCU
  • NEC MCU
  • Communications / Control IC: MAX3232
  • Operating / Working voltage: 3.3V-5.5V
  • Power supply: external
  • Interface: TXD, RXD, GND, VCC
  • Dimensions: 33mm*32mm*16mm

View Complete Details

Yes, I am interested!

TEC-12706 Thermoelectric Cooler Pelitier
  • TEC-12706 Thermoelectric Cooler Pelitier
  • TEC-12706 Thermoelectric Cooler Pelitier
Interested in this product?
Get Best Quote

TEC-12706 Thermoelectric Cooler Pelitier

Rs 170 / PieceGet Latest Price

Model Name/NumberT12706

  • A thermoelectric cooling (TEC) module is a semiconductor-based electronic component that functions as a small heat pump. By applying DC power source to a TEC, heat will be transferred from one side of the module to the other. It creates a cold and hot side.
  • They are widely used in industrial areas, for example, computer CPU, CCDs, portable refrigerators, medical instruments, and so on.
  • When exposed to different temperatures on both sides it will also work as a generator and generate electricity depending on the temperature difference.
  • Voltage : 12V.  Vmax (V) : 15.4V
  • Imax (A) : 6A.  QMax (W) : 92W
  • Internal resistance: 1.98 Ohm +/- 10%
  • Dimensions : 40mm x 40mm x 3.6mm
  • Type: Cooling Cells
  • Usage: Refrigerator/Warmer/Generator

View Complete Details

Yes, I am interested!

AT24C32 IIC Module Precision RTC NA041
Interested in this product?
Get Best Quote

AT24C32 IIC Module Precision RTC NA041

Rs 99 / PieceGet Latest Price

Model Name/NumberDS3231

  • DS3231 AT24C32 IIC Precision RTC Real Time Clock Memory Module For Arduino - NA041
  • 1 mm Size: 38 mm (length) mm * 22 mm (W) mm * 14 mm (height)
  • Weight: 8 g
  • Operating voltage: 3.3-5. 5 V
  • Clock chip: high precision clock chip DS3231
  • Accuracy 5 hours: range 0-40 °, accuracy 2ppm, the error was about 1 minute
  • Calendar alarm clocks with two
  • Programmable square waves
  • Hours real time generator of seconds, minutes, hours, day, date, month and year dates and provide valid up to year 2100 leap year compensation.
  • Chip Temperature sensor is supplied with an accuracy of ± 3 °
  • Memory chips: AT24C32 (32 K capacity)
  • IIC bus interface, maximum transmission speed 400 kHz (operating voltage 5 AT)
  • Can be cascaded with another IIC device, 24C32 addresses can be shortened A0 / A1 / A2 change the default address is 0x57
  • With a LIR2032 battery, to ensure the system after a power failure, moving hours any physical normal

View Complete Details

Yes, I am interested!

X9C103S Digital Potentiometer Module
Interested in this product?
Get Best Quote

X9C103S Digital Potentiometer Module

Rs 99 / PieceGet Latest Price

Model Name/NumberX9C103

  • Potentiometer are variable resistors. Traditional potentiometers use a mechanical mechanism to vary the resistance.
  • This is a digital potentiometer - it is a variable resistor whose resistance vale can be varied digitally from an Arduino or a Rasberry Pi. It consists of a 3 pin output which can replace a mechanical potentiometer which has 3 pins and lets you vary its resistance digitally!
  • This digital potentiometer can also store the current position after a power off in non volatile memory and start from the same position on power on.
  • Simple 3 pin interface to control the resistance!
  • Supply voltage: 3V-5V
  • Chip: X9C103S
  • PCB board size: 2.7 * 1.3CM
  • 10K span potentiometer.
  • Potentiometer center tap between 0-10k slide in total 100 (potentiometer wiper typical impedance 40 ohms)
  • VL and VH digital potentiometer sliding rheostat port corresponding to the low-end and high-end, allowing the input voltage range -5V to + 5V.

View Complete Details

Yes, I am interested!
© Jenshri India Pvt. Ltd.. All Rights Reserved (Terms of Use)