X
View Mobile Number 51% Response Rate

Our Products

+View All

Aerial Bunched Cables

We are a leading Manufacturer of Aerial Bunched Cables, 3x95+1x50+1x16 Aerial Bunched Cable, AERIAL BUNCHED CABLE, 3x120+1x70+1x16 Aerial Bunched Cable Aerial Bunched Cable, Aerial Bunched Cable and 3x70+1x35+1x16 Aerial Bunched Cable from Delhi, India.

Aerial Bunched Cables
Interested in this product?
Get Best Quote

Aerial Bunched Cables

Rs 40 / MeterGet Latest Price

Minimum Order Quantity: 1000 Meter

BrandFIRE FOX
MaterialALUMINIUM
ColorBlack
Core TypeSingle Core
Length1000 meter
Usage/ApplicationPower Transmission,Power Distribution,etc
Packaging TypeRoll
Country of OriginMade in India
Conductor MaterialAluminum
Insulation MaterialXLPE

Aerial Bunched Cables (ABC) is a very novel concept for Over Head Power distribution. When compared to the conventional bare conductor over head distribution system. ABC provides higher safety and reliability, lower power losses and ultimate system economy by reducing installation, maintenance and operative cost. This system is ideal for rural distribution and specially attractive for installation in difficult terrains such as hilly areas, forest areas, coastal areas etc.

Aerial Bunched Cables is also considered to be the best choice for power distribution congested urban areas with narrow lanes and by  lanes. In developing urban complex, Aerial Bunched Cables is the better choice because of flexibility for rerouting as demanded by changes in urban development plan.

Construction Of ABC

XLPE/HDPE insulated power conductors of Aluminium (Neutral conductor and street lighting conductor if and when necessary) are laid together (twisted) around a high tensile standard and galvanized steel (Aluminium Alloy may be used) insulated or bare messenger wire to form the Aerial Bunched Cable. This assembly is directly strung on to distribution pole/towers by means of standard hardware available in the market but care shall be taken to render the messenger wire completely insulated from Earthing at any point of distribution in case of HT ABC.

The XLPE (Cross-linked Polyethylene) insulation is black in colour and is stabilized against deterioration caused by exposure to direct sunlight and ultraviolet radiation. XLPE is cross-linkable low-density polyethylene, which is made thermo set by special formulation from base polymer of thermoplastic low-density polyethylene. XLPE combines the best electrical properties of LDPE and superior thermo mechanical properties.

Materials
  • Aluminium conductors conform to IS:8130(Class-II)
  • Standard high tensile galvanized steel messenger wire conforms to IS:398 (Part 2). Alternatively Aluminum Alloy messenger wire conforms to IS:398 (Part 4)
  • XLPE and HDPE insulation of power conductors specify IS:7098 (Part  I & II) and IS:6474 respectively.

Since, the tension from the current carrying conductor is totally removed by introduction of messenger wire the operating temperature of the conductor is 90.C as against 75.C of the bare conductor of the same size.

View Complete Details

Yes, I am interested!

  • 3x95+1x50+1x16 Aerial Bunched Cable
  • 3x95+1x50+1x16 Aerial Bunched Cable
3x95+1x50+1x16 Aerial Bunched Cable
Interested in this product?
Get Best Quote

3x95+1x50+1x16 Aerial Bunched Cable

Rs 200 / MeterGet Latest Price

Watch Video

MaterialALUMINIUM
ColorBlack
Power/Voltage1100 VOLTS
BrandFIRE FOX
Core Type5 Core
Number Of Core5
Country of OriginMade in India

Aerial Bunched Cables (ABC) is a very novel concept for Over Head Power distribution. When compared to the conventional bare conductor over head distribution system. ABC provides higher safety and reliability, lower power losses and ultimate system economy by reducing installation, maintenance and operative cost. This system is ideal for rural distribution and specially attractive for installation in difficult terrains such as hilly areas, forest areas, coastal areas etc.

Aerial Bunched Cables is also considered to be the best choice for power distribution congested urban areas with narrow lanes and by lanes. In developing urban complex, Aerial Bunched Cables is the better choice because of flexibility for rerouting as demanded by changes in urban development plan.

Construction Of ABC

XLPE/HDPE insulated power conductors of Aluminium (Neutral conductor and street lighting conductor if and when necessary) are laid together (twisted) around a high tensile standard and galvanized steel (Aluminium Alloy may be used) insulated or bare messenger wire to form the Aerial Bunched Cable. This assembly is directly strung on to distribution pole/towers by means of standard hardware available in the market but care shall be taken to render the messenger wire completely insulated from Earthing at any point of distribution in case of HT ABC.

The XLPE (Cross-linked Polyethylene) insulation is black in colour and is stabilized against deterioration caused by exposure to direct sunlight and ultraviolet radiation. XLPE is cross-linkable low-density polyethylene, which is made thermo set by special formulation from base polymer of thermoplastic low-density polyethylene. XLPE combines the best electrical properties of LDPE and superior thermo mechanical properties.

Materials
  • Aluminium conductors conform to IS:8130(Class-II)
  • Standard high tensile galvanized steel messenger wire conforms to IS:398 (Part 2). Alternatively Aluminum Alloy messenger wire conforms to IS:398 (Part 4)
  • XLPE and HDPE insulation of power conductors specify IS:7098 (Part I & II) and IS:6474 respectively.

Since, the tension from the current carrying conductor is totally removed by introduction of messenger wire the operating temperature of the conductor is 90.C as against 75.C of the bare conductor of the same size.



Additional Information:

  • Packaging Details: wooden drum packing or coil shape packing as per requirement

View Complete Details

Yes, I am interested!

AERIAL BUNCHED CABLE
Interested in this product?
Get Best Quote

AERIAL BUNCHED CABLE

Rs 35 / MeterGet Latest Price

Minimum Order Quantity: 1000 Meter

MaterialALUMINIUM
ColorBlack
BrandFIRE FOX
Core Type5 Core
Length1000
Cable Diameter16
Number Of Core3
Country of OriginMade in India

Aerial Bunched Cables (ABC) is a very novel concept for Over Head Power distribution. When compared to the conventional bare conductor over head distribution system. ABC provides higher safety and reliability, lower power losses and ultimate system economy by reducing installation, maintenance and operative cost. This system is ideal for rural distribution and specially attractive for installation in difficult terrains such as hilly areas, forest areas, coastal areas etc.

Aerial Bunched Cables is also considered to be the best choice for power distribution congested urban areas with narrow lanes and by – lanes. In developing urban complex, Aerial Bunched Cables is the better choice because of flexibility for rerouting as demanded by changes in urban development plan.

Construction Of ABC

XLPE/HDPE insulated power conductors of Aluminium (Neutral conductor and street lighting conductor if and when necessary) are laid together (twisted) around a high tensile standard and galvanized steel (Aluminium Alloy may be used) insulated or bare messenger wire to form the Aerial Bunched Cable. This assembly is directly strung on to distribution pole/towers by means of standard hardware available in the market but care shall be taken to render the messenger wire completely insulated from Earthing at any point of distribution in case of HT ABC.

The XLPE (Cross-linked Polyethylene) insulation is black in colour and is stabilized against deterioration caused by exposure to direct sunlight and ultraviolet radiation. XLPE is cross-linkable low-density polyethylene, which is made thermo set by special formulation from base polymer of thermoplastic low-density polyethylene. XLPE combines the best electrical properties of LDPE and superior thermo mechanical properties.

Materials
  • Aluminium conductors conform to IS:8130(Class-II)
  • Standard high tensile galvanized steel messenger wire conforms to IS:398 (Part – 2). Alternatively Aluminum Alloy messenger wire conforms to IS:398 (Part – 4)
  • XLPE and HDPE insulation of power conductors specify IS:7098 (Part – I & II) and IS:6474 respectively.

Since, the tension from the current carrying conductor is totally removed by introduction of messenger wire the operating temperature of the conductor is 90.C as against 75.C of the bare conductor of the same size.



Additional Information:

  • Packaging Details: ISI MATERIAL WITH TEST CERTIFICATE IN WOODEN DRUM PACKING

View Complete Details

Yes, I am interested!

  • 3x120+1x70+1x16 Aerial Bunched Cable Aerial Bunched Cable
  • 3x120+1x70+1x16 Aerial Bunched Cable Aerial Bunched Cable
  • 3x120+1x70+1x16 Aerial Bunched Cable Aerial Bunched Cable
  • 3x120+1x70+1x16 Aerial Bunched Cable Aerial Bunched Cable
  • 3x120+1x70+1x16 Aerial Bunched Cable Aerial Bunched Cable
  • 3x120+1x70+1x16 Aerial Bunched Cable Aerial Bunched Cable
3x120+1x70+1x16 Aerial Bunched Cable Aerial Bunched Cable
Interested in this product?
Get Best Quote

3x120+1x70+1x16 Aerial Bunched Cable Aerial Bunched Cable

Rs 240 / MeterGet Latest Price

Watch Video

BrandFIREFOX
MaterialALUMINIUM
ColorBlack
Power/Voltage1100 VOLTS
Core Type5 Core
Length1000
Number Of Core5
Country of OriginMade in India


Aerial Bunched Cables (ABC) is a very novel concept for Over Head Power distribution. When compared to the conventional bare conductor over head distribution system. ABC provides higher safety and reliability, lower power losses and ultimate system economy by reducing installation, maintenance and operative cost. This system is ideal for rural distribution and specially attractive for installation in difficult terrains such as hilly areas, forest areas, coastal areas etc.

Aerial Bunched Cables is also considered to be the best choice for power distribution congested urban areas with narrow lanes and by  lanes. In developing urban complex, Aerial Bunched Cables is the better choice because of flexibility for rerouting as demanded by changes in urban development plan.

Construction Of ABC

XLPE/HDPE insulated power conductors of Aluminium (Neutral conductor and street lighting conductor if and when necessary) are laid together (twisted) around a high tensile standard and galvanized steel (Aluminium Alloy may be used) insulated or bare messenger wire to form the Aerial Bunched Cable. This assembly is directly strung on to distribution pole/towers by means of standard hardware available in the market but care shall be taken to render the messenger wire completely insulated from Earthing at any point of distribution in case of HT ABC.

The XLPE (Cross-linked Polyethylene) insulation is black in colour and is stabilized against deterioration caused by exposure to direct sunlight and ultraviolet radiation. XLPE is cross-linkable low-density polyethylene, which is made thermo set by special formulation from base polymer of thermoplastic low-density polyethylene. XLPE combines the best electrical properties of LDPE and superior thermo mechanical properties.

Materials
  • Aluminium conductors conform to IS:8130(Class-II)
  • Standard high tensile galvanized steel messenger wire conforms to IS:398 (Part  2). Alternatively Aluminum Alloy messenger wire conforms to IS:398 (Part 4)
  • XLPE and HDPE insulation of power conductors specify IS:7098 (Part  I & II) and IS:6474 respectively.

Since, the tension from the current carrying conductor is totally removed by introduction of messenger wire the operating temperature of the conductor is 90.C as against 75.C of the bare conductor of the same size.



Additional Information:

  • Packaging Details: wooden drum packing or coil shape packing as per requirement

View Complete Details

Yes, I am interested!

  • Aerial Bunched Cable
  • Aerial Bunched Cable
Aerial Bunched Cable
Interested in this product?
Get Best Quote

Aerial Bunched Cable

Rs 60 / MeterGet Latest Price

Watch Video

BrandFIREFOX
MaterialALUMINIUM
ColorBlack
Core Type5 Core
FeaturesBacked by rich industry experience,we offer our clients a wide array of superior quality Insulated
Country of OriginMade in India

3X35+1X25+1X16

Aerial Bunched Cables (ABC) is a very novel concept for Over Head Power distribution. When compared to the conventional bare conductor over head distribution system. ABC provides higher safety and reliability, lower power losses and ultimate system economy by reducing installation, maintenance and operative cost. This system is ideal for rural distribution and specially attractive for installation in difficult terrains such as hilly areas, forest areas, coastal areas etc.

Aerial Bunched Cables is also considered to be the best choice for power distribution congested urban areas with narrow lanes and by lanes. In developing urban complex, Aerial Bunched Cables is the better choice because of flexibility for rerouting as demanded by changes in urban development plan.

Construction Of ABC

XLPE/HDPE insulated power conductors of Aluminium (Neutral conductor and street lighting conductor if and when necessary) are laid together (twisted) around a high tensile standard and galvanized steel (Aluminium Alloy may be used) insulated or bare messenger wire to form the Aerial Bunched Cable. This assembly is directly strung on to distribution pole/towers by means of standard hardware available in the market but care shall be taken to render the messenger wire completely insulated from Earthing at any point of distribution in case of HT ABC.

The XLPE (Cross-linked Polyethylene) insulation is black in colour and is stabilized against deterioration caused by exposure to direct sunlight and ultraviolet radiation. XLPE is cross-linkable low-density polyethylene, which is made thermo set by special formulation from base polymer of thermoplastic low-density polyethylene. XLPE combines the best electrical properties of LDPE and superior thermo mechanical properties.

Materials
  • Aluminium conductors conform to IS:8130(Class-II)
  • Standard high tensile galvanized steel messenger wire conforms to IS:398 (Part 2). Alternatively Aluminum Alloy messenger wire conforms to IS:398 (Part  4)
  • XLPE and HDPE insulation of power conductors specify IS:7098 (Part I & II) and IS:6474 respectively.

Since, the tension from the current carrying conductor is totally removed by introduction of messenger wire the operating temperature of the conductor is 90.C as against 75.C of the bare conductor of the same size.



Additional Information:

  • Packaging Details: IN WOODEN DRUM PACKING

View Complete Details

Yes, I am interested!

Aerial Bunched Cable
Interested in this product?
Get Best Quote

Aerial Bunched Cable

Rs 80 / MeterGet Latest Price

Minimum Order Quantity: 1000 Meter

MaterialALUMINIUM
ColorBlack
Power/Voltage1100 VOLTS
BrandFIREFOX
Core Type5 Core
Length1000
Cable Diameter50
Number Of Core5
Country of OriginMade in India

3X50+1X35+1X16

Aerial Bunched Cables (ABC) is a very novel concept for Over Head Power distribution. When compared to the conventional bare conductor over head distribution system. ABC provides higher safety and reliability, lower power losses and ultimate system economy by reducing installation, maintenance and operative cost. This system is ideal for rural distribution and specially attractive for installation in difficult terrains such as hilly areas, forest areas, coastal areas etc.

Aerial Bunched Cables is also considered to be the best choice for power distribution congested urban areas with narrow lanes and by lanes. In developing urban complex, Aerial Bunched Cables is the better choice because of flexibility for rerouting as demanded by changes in urban development plan.

Construction Of ABC

XLPE/HDPE insulated power conductors of Aluminium (Neutral conductor and street lighting conductor if and when necessary) are laid together (twisted) around a high tensile standard and galvanized steel (Aluminium Alloy may be used) insulated or bare messenger wire to form the Aerial Bunched Cable. This assembly is directly strung on to distribution pole/towers by means of standard hardware available in the market but care shall be taken to render the messenger wire completely insulated from Earthing at any point of distribution in case of HT ABC.

The XLPE (Cross-linked Polyethylene) insulation is black in colour and is stabilized against deterioration caused by exposure to direct sunlight and ultraviolet radiation. XLPE is cross-linkable low-density polyethylene, which is made thermo set by special formulation from base polymer of thermoplastic low-density polyethylene. XLPE combines the best electrical properties of LDPE and superior thermo mechanical properties.

Materials
  • Aluminium conductors conform to IS:8130(Class-II)
  • Standard high tensile galvanized steel messenger wire conforms to IS:398 (Part  2). Alternatively Aluminum Alloy messenger wire conforms to IS:398 (Part  4)
  • XLPE and HDPE insulation of power conductors specify IS:7098 (Part  I & II) and IS:6474 respectively.

Since, the tension from the current carrying conductor is totally removed by introduction of messenger wire the operating temperature of the conductor is 90.C as against 75.C of the bare conductor of the same size.



Additional Information:

  • Packaging Details: wooden drum packing or coil shape packing as per requirement

View Complete Details

Yes, I am interested!

AERIAL BUNCHED CABLE
Interested in this product?
Get Best Quote

AERIAL BUNCHED CABLE

Rs 125 / MeterGet Latest Price

MaterialALUMINIUM
ColorBlack
BrandFIREFOX
Core Type5 Core
Cable Diameter70
Number Of Core3
Country of OriginMade in India

3X70+1X50+1X16

Aerial Bunched Cables (ABC) is a very novel concept for Over Head Power distribution. When compared to the conventional bare conductor over head distribution system. ABC provides higher safety and reliability, lower power losses and ultimate system economy by reducing installation, maintenance and operative cost. This system is ideal for rural distribution and specially attractive for installation in difficult terrains such as hilly areas, forest areas, coastal areas etc.

Aerial Bunched Cables is also considered to be the best choice for power distribution congested urban areas with narrow lanes and by – lanes. In developing urban complex, Aerial Bunched Cables is the better choice because of flexibility for rerouting as demanded by changes in urban development plan.

Construction Of ABC

XLPE/HDPE insulated power conductors of Aluminium (Neutral conductor and street lighting conductor if and when necessary) are laid together (twisted) around a high tensile standard and galvanized steel (Aluminium Alloy may be used) insulated or bare messenger wire to form the Aerial Bunched Cable. This assembly is directly strung on to distribution pole/towers by means of standard hardware available in the market but care shall be taken to render the messenger wire completely insulated from Earthing at any point of distribution in case of HT ABC.

The XLPE (Cross-linked Polyethylene) insulation is black in colour and is stabilized against deterioration caused by exposure to direct sunlight and ultraviolet radiation. XLPE is cross-linkable low-density polyethylene, which is made thermo set by special formulation from base polymer of thermoplastic low-density polyethylene. XLPE combines the best electrical properties of LDPE and superior thermo mechanical properties.

Materials
  • Aluminium conductors conform to IS:8130(Class-II)
  • Standard high tensile galvanized steel messenger wire conforms to IS:398 (Part – 2). Alternatively Aluminum Alloy messenger wire conforms to IS:398 (Part – 4)
  • XLPE and HDPE insulation of power conductors specify IS:7098 (Part – I & II) and IS:6474 respectively.

Since, the tension from the current carrying conductor is totally removed by introduction of messenger wire the operating temperature of the conductor is 90.C as against 75.C of the bare conductor of the same size.



Additional Information:

  • Packaging Details: ISI MATERIAL WITH TEST CERTIFICATE IN WOODEN DRUM PACKING

View Complete Details

Yes, I am interested!

Aerial Bunched Cable
Interested in this product?
Get Best Quote

Aerial Bunched Cable

Rs 160 / MeterGet Latest Price

Minimum Order Quantity: 1000 Meter

MaterialALUMINIUM
ColorBlack
Power/Voltage1100 VOLTS
BrandFIREFOX
Core Type5 Core
Length1000
Number Of Core5
Country of OriginMade in India

3X95+1X70+1X16

Aerial Bunched Cables (ABC) is a very novel concept for Over Head Power distribution. When compared to the conventional bare conductor over head distribution system. ABC provides higher safety and reliability, lower power losses and ultimate system economy by reducing installation, maintenance and operative cost. This system is ideal for rural distribution and specially attractive for installation in difficult terrains such as hilly areas, forest areas, coastal areas etc.

Aerial Bunched Cables is also considered to be the best choice for power distribution congested urban areas with narrow lanes and by  lanes. In developing urban complex, Aerial Bunched Cables is the better choice because of flexibility for rerouting as demanded by changes in urban development plan.

Construction Of ABC

XLPE/HDPE insulated power conductors of Aluminium (Neutral conductor and street lighting conductor if and when necessary) are laid together (twisted) around a high tensile standard and galvanized steel (Aluminium Alloy may be used) insulated or bare messenger wire to form the Aerial Bunched Cable. This assembly is directly strung on to distribution pole/towers by means of standard hardware available in the market but care shall be taken to render the messenger wire completely insulated from Earthing at any point of distribution in case of HT ABC.

The XLPE (Cross-linked Polyethylene) insulation is black in colour and is stabilized against deterioration caused by exposure to direct sunlight and ultraviolet radiation. XLPE is cross-linkable low-density polyethylene, which is made thermo set by special formulation from base polymer of thermoplastic low-density polyethylene. XLPE combines the best electrical properties of LDPE and superior thermo mechanical properties.

Materials
  • Aluminium conductors conform to IS:8130(Class-II)
  • Standard high tensile galvanized steel messenger wire conforms to IS:398 (Part  2). Alternatively Aluminum Alloy messenger wire conforms to IS:398 (Part  4)
  • XLPE and HDPE insulation of power conductors specify IS:7098 (Part I & II) and IS:6474 respectively.

Since, the tension from the current carrying conductor is totally removed by introduction of messenger wire the operating temperature of the conductor is 90.C as against 75.C of the bare conductor of the same size.



Additional Information:

  • Packaging Details: wooden drum packing or coil shape packing as per requirement

View Complete Details

Yes, I am interested!

Aerial Bunched Cable
Interested in this product?
Get Best Quote

Aerial Bunched Cable

Rs 210 / MeterGet Latest Price

Minimum Order Quantity: 1000 Meter

MaterialALUMINIUM
ColorBlack
Power/Voltage1100 VOLTS
BrandFIREFOX
Core Type5 Core
Number Of Core5
Country of OriginMade in India

3X120+1X70+1X16

Aerial Bunched Cables (ABC) is a very novel concept for Over Head Power distribution. When compared to the conventional bare conductor over head distribution system. ABC provides higher safety and reliability, lower power losses and ultimate system economy by reducing installation, maintenance and operative cost. This system is ideal for rural distribution and specially attractive for installation in difficult terrains such as hilly areas, forest areas, coastal areas etc.

Aerial Bunched Cables is also considered to be the best choice for power distribution congested urban areas with narrow lanes and by lanes. In developing urban complex, Aerial Bunched Cables is the better choice because of flexibility for rerouting as demanded by changes in urban development plan.

Construction Of ABC

XLPE/HDPE insulated power conductors of Aluminium (Neutral conductor and street lighting conductor if and when necessary) are laid together (twisted) around a high tensile standard and galvanized steel (Aluminium Alloy may be used) insulated or bare messenger wire to form the Aerial Bunched Cable. This assembly is directly strung on to distribution pole/towers by means of standard hardware available in the market but care shall be taken to render the messenger wire completely insulated from Earthing at any point of distribution in case of HT ABC.

The XLPE (Cross-linked Polyethylene) insulation is black in colour and is stabilized against deterioration caused by exposure to direct sunlight and ultraviolet radiation. XLPE is cross-linkable low-density polyethylene, which is made thermo set by special formulation from base polymer of thermoplastic low-density polyethylene. XLPE combines the best electrical properties of LDPE and superior thermo mechanical properties.

Materials
  • Aluminium conductors conform to IS:8130(Class-II)
  • Standard high tensile galvanized steel messenger wire conforms to IS:398 (Part 2). Alternatively Aluminum Alloy messenger wire conforms to IS:398 (Part  4)
  • XLPE and HDPE insulation of power conductors specify IS:7098 (Part  I & II) and IS:6474 respectively.

Since, the tension from the current carrying conductor is totally removed by introduction of messenger wire the operating temperature of the conductor is 90.C as against 75.C of the bare conductor of the same size.



Additional Information:

  • Packaging Details: wooden drum packing or coil shape packing as per requirement

View Complete Details

Yes, I am interested!

3x70+1x35+1x16 Aerial Bunched Cable
Interested in this product?
Get Best Quote

3x70+1x35+1x16 Aerial Bunched Cable

Rs 135 / MeterGet Latest Price

MaterialALUMINIUM
ColorBlack
Power/Voltage1100 VOLTS
BrandFIRE FOX
Core Type4 core
Length1000
Packaging Typeas requirement
Number Of Core4
Country of OriginMade in India

Aerial Bunched Cables (ABC) is a very novel concept for Over Head Power distribution. When compared to the conventional bare conductor over head distribution system. ABC provides higher safety and reliability, lower power losses and ultimate system economy by reducing installation, maintenance and operative cost. This system is ideal for rural distribution and specially attractive for installation in difficult terrains such as hilly areas, forest areas, coastal areas etc.

Aerial Bunched Cables is also considered to be the best choice for power distribution congested urban areas with narrow lanes and by lanes. In developing urban complex, Aerial Bunched Cables is the better choice because of flexibility for rerouting as demanded by changes in urban development plan.

Construction Of ABC

XLPE/HDPE insulated power conductors of Aluminium (Neutral conductor and street lighting conductor if and when necessary) are laid together (twisted) around a high tensile standard and galvanized steel (Aluminium Alloy may be used) insulated or bare messenger wire to form the Aerial Bunched Cable. This assembly is directly strung on to distribution pole/towers by means of standard hardware available in the market but care shall be taken to render the messenger wire completely insulated from Earthing at any point of distribution in case of HT ABC.

The XLPE (Cross-linked Polyethylene) insulation is black in colour and is stabilized against deterioration caused by exposure to direct sunlight and ultraviolet radiation. XLPE is cross-linkable low-density polyethylene, which is made thermo set by special formulation from base polymer of thermoplastic low-density polyethylene. XLPE combines the best electrical properties of LDPE and superior thermo mechanical properties.

Materials
  • Aluminium conductors conform to IS:8130(Class-II)
  • Standard high tensile galvanized steel messenger wire conforms to IS:398 (Part 2). Alternatively Aluminum Alloy messenger wire conforms to IS:398 (Part 4)
  • XLPE and HDPE insulation of power conductors specify IS:7098 (Part I & II) and IS:6474 respectively.

Since, the tension from the current carrying conductor is totally removed by introduction of messenger wire the operating temperature of the conductor is 90.C as against 75.C of the bare conductor of the same size.



Additional Information:

  • Packaging Details: wooden drum packing

View Complete Details

Yes, I am interested!

AERIAL BUNCHED CABLE

Rs 35 / MeterGet Latest Price

Minimum Order Quantity: 500 Meter

MaterialALUMINIUM
ColorBlack
Power/Voltage1100 VOLTS
BrandFIREFOX
Core Type5 Core
Length1000
Number Of Core5
Country of OriginMade in India

3X16+1X25+1X16

Aerial Bunched Cables (ABC) is a very novel concept for Over Head Power distribution. When compared to the conventional bare conductor over head distribution system. ABC provides higher safety and reliability, lower power losses and ultimate system economy by reducing installation, maintenance and operative cost. This system is ideal for rural distribution and specially attractive for installation in difficult terrains such as hilly areas, forest areas, coastal areas etc.

Aerial Bunched Cables is also considered to be the best choice for power distribution congested urban areas with narrow lanes and by – lanes. In developing urban complex, Aerial Bunched Cables is the better choice because of flexibility for rerouting as demanded by changes in urban development plan.

Construction Of ABC

XLPE/HDPE insulated power conductors of Aluminium (Neutral conductor and street lighting conductor if and when necessary) are laid together (twisted) around a high tensile standard and galvanized steel (Aluminium Alloy may be used) insulated or bare messenger wire to form the Aerial Bunched Cable. This assembly is directly strung on to distribution pole/towers by means of standard hardware available in the market but care shall be taken to render the messenger wire completely insulated from Earthing at any point of distribution in case of HT ABC.

The XLPE (Cross-linked Polyethylene) insulation is black in colour and is stabilized against deterioration caused by exposure to direct sunlight and ultraviolet radiation. XLPE is cross-linkable low-density polyethylene, which is made thermo set by special formulation from base polymer of thermoplastic low-density polyethylene. XLPE combines the best electrical properties of LDPE and superior thermo mechanical properties.

Materials
  • Aluminium conductors conform to IS:8130(Class-II)
  • Standard high tensile galvanized steel messenger wire conforms to IS:398 (Part – 2). Alternatively Aluminum Alloy messenger wire conforms to IS:398 (Part – 4)
  • XLPE and HDPE insulation of power conductors specify IS:7098 (Part – I & II) and IS:6474 respectively.

Since, the tension from the current carrying conductor is totally removed by introduction of messenger wire the operating temperature of the conductor is 90.C as against 75.C of the bare conductor of the same size.



Additional Information:

  • Packaging Details: WOODEN DRUM PACKING

View Complete Details

Yes, I am interested!
4.6/5★★★★★★★★★★

Reviewed by 16 Users

5 star14

4 star0

3 star1

2 star0

1 star1

User Satisfaction

Response100%

Quality100%

Delivery100%

Most Relevant Reviews

U

Umesh ★★★★★ ★★★★★

14-September-21

Response

Quality

Delivery

A

Amar ★★★★★ ★★★★★

15-May-21

Response

Communication is good. But deal is not done.

Get in touch with us

Reach Us

J M Cable And ConductorsPlot No. J 8 & 9 Bawana, North West Delhi, Delhi-39, Pocket-J, Sector-3, D S I I D C Industrial Area, Delhi-110039, India

Manoj Jain (Owner)

View Mobile Number51% Call Response Rate

Send SMS
Send Email
Send Payment
Leave a Message, we will call you back!
Send your enquiry to this supplier
I agree to the terms and privacy policy

We Accept Online Payments

All Rights Reserved (Terms of Use)