J. R. S. Communication Private Limited

Speed (Mbps)	300
Connectivity Type	Wired

The new updated revision of CCR1009 is here. We attempted to combine all the customer feedback and best practice in CCR device manufacturing that we learned over the last three years, since the first CCR1009 devices were launched. Important changes No switch-chip - the device now features only fully independent Ethernet ports each with a direct connection to the CPU, allowing to overcome previous shared 1Gbit limitation from switch-chip ports and utilize full potential of CPU processing power on those ports. Combo-port - a single 1Gbit software interface that has two hardware interfaces - an SFP cage and a Gigabit Ethernet port, allowing you to use any type of connection available to you. It is also possible to switch between both physical interfaces in RouterOS. In an event of disconnect the combo-port provides hardware fail-over feature. 100Mbps SFP support - this is our first device that supports 100BASE-LX/100BASE-SX/100BASE-BX fiber modules, as well as standard 1.25G SFP modules. More throughput - because the ports are now directly connected to the CPU, the new CCR1009 can achieve even higher throughput. Product specifications Details Product code CCR1009-7G-1C-1S+ CPU nominal frequency 1.2 GHz CPU core count 9 Size of RAM 2 GB 10/100/1000 Ethernet ports 7 Number of USB ports 1 Power Jack 3 Supported input voltage 15 V - 57 V PoE in Yes Voltage Monitor Yes PCB temperature monitor Yes CPU temperature monitor Yes Dimensions 444x175x47mm Operating System RouterOS Tested ambient temperature -20C .. +60C License level 6 Current Monitor Yes CPU TLR4-00980CH-10CE-A3b Max Power consumption 34W SFP+ ports 1 USB Power Reset Yes USB slot type microUSB type AB Serial port RS232 Storage type NAND Storage size 128 MB CPU Threads count 9

Our popular 9-core Cloud Core Router is now available in a new passive cooling enclosure. This CCR1009 unit is equipped with two heat-pipes and a specially designed heat-sink, so its completely silent.

The unit is powered by an external 24v 2.5A AC/DC adapter and supports power redundancy if you also power it from the PoE input port.

 

Product specifications

The LHG is a compact and light 5GHz 802.11 a/n wireless device with an integrated dual polarization 24.5 dBi grid antenna at a revolutionary price. It is perfect for point to point links or for use as a CPE at longer distances and supports Nv2 TDMA protocol.

The grid design ensures protection against wind, and the fact that the antenna element is built into the wireless unit means no loss on cables.

We have two versions available.

- RBLHG-5nD-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.

- RBLHG-5nD (International) supports 5150MHz-5875MHz range.

 

Product specifications

Wireless specifications

Our best price/performance 5Ghz CPE. The SXT Lite5 (product code RBSXT5nDr2), 5Ghz 16dBi integrated antenna with 600MHz CPU, 64MB RAM and RouterOS L3 installed. SXT Lite5 is a low cost, high transmit power 5GHz outdoor wireless device. It can be used for point to point links or as a CPE for point to multipoint installations. Product specifications Details Product code RBSXT5nDr2 CPU nominal frequency 600 MHz CPU core count 1 Size of RAM 64 MB 10/100 Ethernet ports 1 Wireless chip model AR9344 Wireless standards 802.11a/n PoE in Yes Supported input voltage 8 V - 32 V Dimensions 140x140x56mm Operating System RouterOS Tested ambient temperature -30C .. +80C License level 3 Antenna gain DBI 16 CPU AR9344 Max Power consumption 7W Number of chains 2 Storage type NAND Storage size 128 MB Suggested price $59.00 Wireless specifications 5 GHz Transmit power (dBm)Receive SensitivityTransmit power (mW) 6MBit/s 27 -95 501 54MBit/s 23 -80 200 MCS0 27 -95 501 MCS7 22 -77 158

Our best price/performance 5Ghz CPE. The SXT Lite5 (product code RBSXT5nDr2), 5Ghz 16dBi integrated antenna with 600MHz CPU, 64MB RAM and RouterOS L3 installed.

SXT Lite5 is a low cost, high transmit power 5GHz outdoor wireless device. It can be used for point to point links or as a CPE for point to multipoint installations.

BaseBox 5 The RB912 in an outdoor enclosure, fit with two RPSMA connectors for antennas, and a cable hood for protection against moisture. Also available are three additional places for antenna connectors, in case you wish to use the RB912 miniPCIe slot for one more wireless interface to make a dual band device. The case can be opened with one hand, and is protected against the elements. USB, Ethernet and a Grounding wire exits are provided on the bottom, behind a protective door. Comes with a mounting loop for tower/pole mounting, and a separate DIN rail mount is also provided. Package also includes a PoE injector and power supply unit. Box contains: RB912 outdoor unit, PSU, PoE injector, mounting loop, DIN rail mount Product specifications Details Product code RB912UAG-5HPnD-OUT CPU nominal frequency 600 MHz CPU core count 1 Size of RAM 64 MB Architecture MIPS-BE 10/100/1000 Ethernet ports 1 MiniPCI-e slots 1 Wireless chip model AR9342 Wireless standards 802.11a/n Number of USB ports 1 Supported input voltage 8 V - 30 V PoE in Yes Voltage Monitor Yes PCB temperature monitor Yes Dimensions 246x135x50mm Operating System RouterOS Tested ambient temperature -30C to +60C License level 4 CPU AR9342 Max Power consumption 14W at 24v USB slot type USB type A Number of chains 2 Storage type NAND Storage size 64 MB

RB850Gx2 The RB850Gx2 is a five port Gigabit ethernet router. Comparing to the RB450G, the RB850Gx2 is much faster, with a dual core CPU, yet it still retains the same form factor, and will fit into the same enclosures. The device is powered by a 533MHz P1023 PPC CPU, and also includes a temperature sensor and voltage monitor. Product specifications Details Product code RB850Gx2 CPU nominal frequency 533 MHz CPU core count 2 Size of RAM 512 MB Architecture PowerPC 10/100/1000 Ethernet ports 5 Memory Cards 1 Memory card type microSD Power Jack 2 Supported input voltage 8 V - 28 V PoE in Yes Voltage Monitor Yes CPU temperature monitor Yes PCB temperature monitor Yes Dimensions 90mm x 115mm Operating System RouterOS Tested ambient temperature -60C .. +70C tested License level 5 CPU P1023NSN5CFB Max Power consumption 8W Serial port RS232 Storage type NAND Storage size 512 MB

CCR1009-8G-1S-1S+ The CCR1009 is a powerful Ethernet router based on the cutting edge TILERA 9 core CPU. CCR1009-8G-1S-1S+ comes with 2GB of RAM, eight Gigabit Ethernet ports (Ether1-4 are in a Switch group), one SFP port and one SFP+ port with 10G support (SFP module not included). CCR1009-8G-1S-1S+ model have dual power supplies built in for redundancy (if one power line fails, the other one will take over automatically). Also, CCR1009-8G-1S-1S+ supports a Smart card, to store your private key for use in all features that support Certificate based authentication. SFP+ port supports SFP (1.25G) modules as well.Product specifications Details Product code CCR1009-8G-1S-1S+ CPU nominal frequency 1.2 GHz SFP DDMI Yes CPU core count 9 Size of RAM 2 GB Architecture TILE 10/100/1000 Ethernet ports 8 Number of USB ports 1 Power Jack 2 PoE in Yes Supported input voltage 14 V - 57 V Voltage Monitor Yes PCB temperature monitor Yes CPU temperature monitor Yes Dimensions 444x175x47mm Operating System RouterOS Tested ambient temperature -20C .. +60C License level 6 Current Monitor Yes CPU TLR4-00980CG-10CE Max Power consumption 35W SFP ports 1 SFP+ ports 1 USB slot type microUSB type AB Serial port RS232 + Header Storage type NAND Storage size 128 MB Suggested price $495.00

Metal 5SHPn The new, completely waterproof, rugged, and super high powered RouterBOARD Metal. The serious outdoor wireless device! Fully sealed, industrial design metal case, powered by RouterBOARD and RouterOS. 1300mW of output power - to reach the last mile, in any conditions! It comes with L4 license, so you can attach your favorite 5Ghz antennna to use it as an AP, to make wireless point-to-point links or as a CPE- whatever you prefer! It has a built-in N-male connector, and pole attachment points, so you can attach it to an antenna directly, or use a standard antenna cable. LED signal indicators make it easy to install and align. Package contains Metal-5SHPn, mounting loops, PoE injector, power adapter Product specifications Details Product code RBMetal5SHPn CPU nominal frequency 400 MHz CPU core count 1 Architecture MIPS-BE Size of RAM 64 MB 10/100 Ethernet ports 1 Wireless chip model AR9280 Wireless standards 802.11a/n PoE in Yes Supported input voltage 9 V - 30 V Voltage Monitor Yes PCB temperature monitor Yes Dimensions 177x44x44mm, 193g Operating System RouterOS v5 Tested ambient temperature -30C to +70C License level 4 CPU AR7241 Max Power consumption 11.5W Number of chains 1 Storage type NAND Storage size 128 MB Suggested price $99.00

The RB2011 is a low cost multi port device series. Designed for indoor use, and available in many different cases, with a multitude of options. The RB2011 is powered by RouterOS, a fully featured routing operating system which has been continuously improved for fifteen years. Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration and monitoring - just a few of the vast number of features supported by RouterOS. RouterBOARD 2011UiAS-RM, in comparison with RB2011L series, not only has five Gigabit LAN ports and five Fast Ethernet LAN ports, but also has RJ45 serial port, microUSB port and more RAM (128MB instead of 64MB). Also, it has RouterOS L5 license (instead of L4) and nice touchscreen LCD for configuration. SFP cage is also present (SFP module not included!) There is PoE output function for port #10 - it can power other PoE capable devices with the same voltage as applied to the unit. Maximum load on the port is 500mA. Tested and recommended to use with MikroTik SFP modules: S-85DLC05D, S-31DLC20D and S-35/53LC20D (not included) RouterBOARD 2011UiAS-RM comes with 1U rackmount enclosure, LCD panel and power supply. Product specifications Details Product code RB2011UiAS-RM CPU nominal frequency 600 MHz SFP DDMI Yes CPU core count 1 Size of RAM 128 MB 10/100 Ethernet ports 5 10/100/1000 Ethernet ports 5 Number of USB ports 1 Power Jack 1 PoE in Yes PoE out Yes Supported input voltage 8 V - 30 V Voltage Monitor Yes PCB temperature monitor Yes Dimensions 214mm x 86mm for PCB Operating System RouterOS Tested ambient temperature -35C to +65C License level 5 CPU AR9344 SFP ports 1 USB slot type microUSB type AB Serial port RJ45 Storage type NAND Storage size 128 MB Suggested price $119.00

NetMetal 5

This NetMetal version is equipped with super high power 1.3W 2x2 dual chain 802.11a/n/ac wireless and two RP-SMA connectors for external antennas

The NetMetal is a 802.11ac wireless device in a waterproof metal enclosure. Its rugged design is made to withstand the toughest conditions, but at the same time is easy to use and can be opened and closed with one hand. The solid aluminum enclosure also works as a reliable heat-sink for it’s high output power radio.

The NetMETAL is equipped with powerful 720Mhz CPU, 128MB RAM, one Gigabit Ethernet port, 802.11ac wireless, one SFP cage, USB, RP-SMA connectors for external antennas and RouterOS L4 license.

Product specifications

RB3011UiAS-RM The RB3011 is a new multi port device, our first to be running an ARM architecture CPU for higher performance than ever before. The RB3011 has ten Gigabit ports divided in two switch groups, an SFP cage and for the first time a SuperSpeed full size USB 3.0 port, for adding storage or an external 3G/4G modem. RB3011UiAS-RM Unit comes with 1U rackmount enclosure, a touchscreen LCD panel, a serial console port and PoE output functionality on the last Ethernet port. Product specifications Details Product code RB3011UiAS-RM CPU nominal frequency 1.4 GHz CPU core count 2 Size of RAM 1 GB 10/100/1000 Ethernet ports 10 Number of USB ports 1 Power Jack 1 PoE in Yes PoE out Yes Supported input voltage 10 V - 30 V Voltage Monitor Yes PCB temperature monitor Yes Dimensions 443x92x44mm Operating System RouterOS Tested ambient temperature -30 + 70 C License level 5 CPU IPQ-8064-0-519FCBGA-TR-01-0 Max Power consumption 10W SFP ports 1 USB slot type USB 3.0 type A Serial port RJ45 Storage type NAND Storage size 128 MB

RB2011UiAS-RM

The RB2011 is a low cost multi port device series. Designed for indoor use, and available in many different cases, with a multitude of options.

The RB2011 is powered by RouterOS, a fully featured routing operating system which has been continuously improved for fifteen years. Dynamic routing, hotspot, firewall, MPLS, VPN, advanced quality of service, load balancing and bonding, real-time configuration and monitoring - just a few of the vast number of features supported by RouterOS.

RouterBOARD 2011UiAS-RM, in comparison with RB2011L series, not only has five Gigabit LAN ports and five Fast Ethernet LAN ports, but also has RJ45 serial port, microUSB port and more RAM (128MB instead of 64MB). Also, it has RouterOS L5 license (instead of L4) and nice touchscreen LCD for configuration. SFP cage is also present (SFP module not included!)

There is PoE output function for port #10 - it can power other PoE capable devices with the same voltage as applied to the unit. Maximum load on the port is 500mA.

Tested and recommended to use with MikroTik SFP modules: S-85DLC05D, S-31DLC20D and S-35/53LC20D (not included)

RouterBOARD 2011UiAS-RM comes with 1U rackmount enclosure, LCD panel and power supply.

Product specifications

Metal 2 The new, completely waterproof, rugged, and super high powered Router BOARD Metal. The serious outdoor wireless device. Now in 2.4Ghz with amazing 1600mW TX power! Fully sealed, industrial design metal case, powered by RouterBOARD and RouterOS. 1.6 WATT of output power - to reach the last mile, in any conditions. It comes with L4 license, so you can attach your favorite antennna to use it as an AP, to make wireless point-to-point links or as a CPE- whatever you prefer! Works in the 2GHz frequency (2192-2732MHz depending on country regulations) It has a built-in N-male connector, and pole attachment points, so you can attach it to an antenna directly, or use a standard antenna cable. LED signal indicators make it easy to install and align. Package contains Metal-2SHPn, mounting loops, PoE injector, power adapter and 6dBi omni antenna Product specifications Details Product code RBMetal2SHPn CPU nominal frequency 400 MHz CPU core count 1 Architecture MIPS-BE Size of RAM 64 MB 10/100 Ethernet ports 1 Wireless chip model AR9283 Wireless standards 802.11b/g/n Supported input voltage 9 V - 30 V PoE in Yes Voltage Monitor Yes PCB temperature monitor Yes Dimensions 177x44x44mm, 193g Operating System RouterOS Tested ambient temperature -30C to +70C License level 4 CPU AR7241 Max Power consumption 11.5W Number of chains 1 Storage type NAND Storage size 64 MB

RB1100AHx2

RB1100AHx2 is 1U rackmount Gigabit Ethernet router - with a dual core CPU, it can reach up to a million packets per second and supports hardware encryption!

It has thirteen individual gigabit Ethernet ports, two 5-port switch groups, and includes Ethernet bypass capability. 2GB of SODIMM RAM are included, there is one microSD card slot, a beeper and a serial port.

The RB1100AHx2 comes preinstalled in a 1U aluminium rackmount case, power supply and power plug, assembled and ready to deploy.

Product specifications

The new updated revision of CCR1009 is here. We attempted to combine all the customer feedback and best practice in CCR device manufacturing that we learned over the last three years, since the first CCR1009 devices were launched. Important changes No switch-chip - the device now features only fully independent Ethernet ports each with a direct connection to the CPU, allowing to overcome previous shared 1Gbit limitation from switch-chip ports and utilize full potential of CPU processing power on those ports. Combo-port - a single 1Gbit software interface that has two hardware interfaces - an SFP cage and a Gigabit Ethernet port, allowing you to use any type of connection available to you. It is also possible to switch between both physical interfaces in RouterOS. In an event of disconnect the combo-port provides hardware fail-over feature. 100Mbps SFP support - this is our first device that supports 100BASE-LX/100BASE-SX/100BASE-BX fiber modules, as well as standard 1.25G SFP modules. More throughput - because the ports are now directly connected to the CPU, the new CCR1009 can achieve even higher throughput.

Product specifications

DISC Lite5 We are glad to introduce a new high gain 5GHz CPE with disruptive pricing! Its DISC Lite5, based on our popular LHG hardware design. DISC Lite5 is equipped with 21dBi Dual Chain 802.11n integrated CPE with 600MHz CPU, 64MB RAM, 1x 10/100Mbps Ethernet port and RouterOS L3 installed. It comes complete with a power supply, PoE injector and mounting kit for a ultra low cost at USD48! The RouterOS Level3 allows to use the DISC Lite5 as CPE or Point-to-Point 5GHz links. We have two versions available. - DISC Lite5 US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed. - DISC Lite5 (International) supports 5150MHz-5875MHz range. Product specifications Details Product code RBDisc-5nD CPU nominal frequency 600 MHz CPU core count 1 Size of RAM 64 MB 10/100 Ethernet ports 1 Wireless chip model AR9344 Wireless standards 802.11a/n Supported input voltage 11 V - 30 V PoE in Yes Dimensions 265mm, height 80mm Operating System RouterOS Tested ambient temperature -40C .. +70C License level 3 Antenna gain DBI 21 CPU AR9344 Max Power consumption 6W Number of chains 2 Storage type FLASH Storage size 16 MB