X

Jyoti Enterprises

Vadodara, Gujarat

| GST  24ACRPS1393K1ZZ

is a member of IndiaMART

| Verified Supplier

|

View Mobile Number 7% Response Rate

Schneider Relay

Leading Wholesaler of RE17RAMU Schneider Modular Timing Relay and Schneider Easy Pact TVS Differential Thermal Overload Relay from Vadodara.

  • RE17RAMU Schneider Modular Timing Relay
  • RE17RAMU Schneider Modular Timing Relay
RE17RAMU Schneider Modular Timing Relay
Interested in this product?
Get Best Quote
BrandSchneider
Model Name/NumberRE17RAMU
Power/Voltage240 V
Width17.5 mm
Height90 mm
Depth72 mm
Product Or Component TypeDual function relay
discrete output typeRelay
Device short nameRE17R
Time delay typePower on-delay
Nominal output current8 Amp
contacts type and composition1 C/O
Contacts materialCadmium free
Control TypeSelector switch front panel
Frequency50 Hz
Release of Input voltage10 V
Tightening Torque1 Nm conforming to IEC 60947-1
Housing MaterialSelf Extinguishing
Repeat Accuracy+/- 0.5 % conforming to IEC 61812-1
Temperature Drift+/- 0.05 %/ Degree Celsius
Voltage Drift+/- 0.2 %/V
Setting Accuracy of time delay+/- 10 % of full scale at 25 DegreeC conforming to IEC 61812-1
Control signal pulse width100 ms with load in parallel typical
Insulation Resistance100 MOhm at 500 V DC conforming to IEC 60664-1
Reset time120 ms on de-energisation typical
On-load factor100 %
Power Consumption32 VAmp at 240 V AC
Minimum switching current10 mAmp at 5 V DC
Maximum switching current8 A AC/DC
Maximum Switching voltage250 V AC
Breaking Capacity2000 VA
Operating frequency10 Hz
Range of productHarmony Timer Relays
Electrical Durability100000 cycles (8 A at 250 V AC maximum) for resistive load
Mechanical durability10000000 cycles
Dielectric strength2.5 kV 1 mA/1 minute 50 Hz conforming to IEC 61812-1
Rated impulse withstand voltage5 kV during 1.2/50 us
Power on Delay100 ms
MarkingCE
Creepage distance4 kV/3 conforming to IEC 60664-1
Safety reliability dataB10d = 270000
Mounting positionAny position in relation to normal vertical mounting plane
Mounting support35 mm DIN rail conforming to EN/IEC 60715
Net Weight0.07 kg
Time delay type cA, At
FunctionalityOn-delay timing
Compatibility codeRE17

Product Details :-

Harmony Timer are timing relays designed to time events in industrial automationsystems by closing and opening contacts before, during, or after a set time period.
They are designed for hard-wired logic automated systems to complement thefunctions of industrial progammable logic controllers (PLCs).

They are suitable for a wide range of applications, including:
  • Machines: single machine, and industrial automation and processes
  • Buildings: lighting control, access control door locks, roller shutters
  • Water segment: pumping and irrigation systems
  • HVAC: fans and centralized water systems
  • Depending on the product model, these relays support multiple time ranges.
  • Modular DIN rail mounted timing relays


The Harmony Timer relays also feature:
  • Wide power supply range from 24 to 240 V z
  •  Single or multi timing ranges from 0.02 s to 999 hrs
  • Screw or spring connection terminals
  •  Relay or solid-state output
  • Conformity to IEC 61812-1 and EN 61812-1 standards
  • UL, CSA, GL, RCM, EAC, CCC, and China ROHS compliance
  • Easy to set up with wiring diagrams on the side of the product


Environment  
immunity to microbreaks 20 ms
standards 2006/95/EC
  2004/108/EC
  IEC 61812-1
  EN 61000-6-3
  EN 61000-6-1
  EN 61000-6-4
  EN 61000-6-2
Product certifications CSA
  CULus
  GL
Ambient air temperature for storage -30…60 °C
Ambient air temperature for operation -20…60 °C
IP degree of protection IP20 (terminal block) conforming to IEC 60529
  IP40 (housing) conforming to IEC 60529
  IP50 (front panel) conforming to IEC 60529
vibration resistance 20 m/s² (f= 10…150 Hz) conforming to IEC 60068-2-6
shock resistance 15 gn for 11 ms conforming to IEC 60068-2-27
Relative humidity 93 % without condensation conforming to IEC 60068-2-30

View Complete Details

Yes, I am interested!

  • Schneider Easy Pact TVS Differential Thermal Overload Relay
  • Schneider Easy Pact TVS Differential Thermal Overload Relay
Schneider Easy Pact TVS Differential Thermal Overload Relay
Interested in this product?
Get Best Quote
BrandSchneider
Model Name/NumberLRE35
Mounting SupportUnder contactor Plate, with specific accessories Rail, with specific accessories
RangeEasyPact
Product NameEasyPact TVS
Product or component typeDifferential thermal overload relay
Device short nameLRE
Relay applicationMotor protection
Phase failure sensitivityTripping current 130 % of Ir on two phase, the last one at 0 conforming to IEC 60947-4-1
ColourGrey (RAL 7011)
Network typeAC
Network frequency50 Hz
Thermal overload classClass 10A conforming to IEC 60947-4-1
Signalling functionRelay trip indicator
Thermal protection adjustment range38 Amp
Tripping threshold1.14 +/- 0.06 Ir conforming to IEC 60947-4-1
Mechanical robustnessShocks: 6 Gn for 11 ms conforming to IEC 60068-2-7 Vibrations: 3 Gn conforming to IEC 60068-2-6
Auxiliary contact composition1 NO + 1 NC
conventional free air thermal current5 Amp for signalling circuit
Rated operational voltage<= 690 V AC
Associated fuse rating40 A aM for power circuit 80 A gG for power circuit 5 A gG for signalling circuit
[Ui] rated insulation voltage690 V conforming to IEC 60947-4-1
[Uimp] rated impulse withstand voltage6 kV
Local SignallingTrip indicator
Control typePush-button red stop:
Temperature Compensation60 Degree Celsius
Recommended tightening torquePower circuit: 2.5 N.m - on screw clamp terminals Signalling circuit: 1.7 N.m - on screw clamp
Height44.5 mm
Width45 mm
Depth70 mm
Net weight0.13 kg

Environment
standards IEC 60947-5-1  
IEC 60947-4-1
Product certifications EAC  
protective treatment TH conforming to IEC 60068  
IP degree of protection IP20 conforming to IEC 60529  
ambient air temperature for operation -20…60 °C without derating conforming to IEC 60947-4-1  
-20…70 °C with derating
Ambient air temperature for storage -60…80 °C  
fire resistance 850 °C conforming to IEC 60068-2-1  
dielectric strength 6 kV at 50 Hz conforming to IEC 60255-5  
electromagnetic compatibility Surge withstand: 6 kV conforming to IEC 60801-5

Connections - terminals

Signalling circuit: screw clamp terminals 2 1…2.5 mm² - cable stiffness: flexible without cable end Signalling circuit: screw clamp terminals 2 1…2.5 mm² - cable stiffness: flexible with cable end Signalling circuit: screw clamp terminals 2 1…2.5 mm² - cable stiffness: solid without cable end Power circuit: screw clamp terminals 1 2.5…10 mm² - cable stiffness: flexible without cable end Power circuit: screw clamp terminals 1 1.5…6 mm² - cable stiffness: flexible with cable end Power circuit: screw clamp terminals 1 2.5…10 mm² - cable stiffness: solid without cable end.

View Complete Details

Yes, I am interested!
All Rights Reserved (Terms of Use)