Jumo Instrument
| Brand | Jumbo |
| Number of Transmitter | Up to 16 measured values can be received per receiver |
| Radio Frequency | 868.4 MHz or 915 MHz |
| Current | Load-independent direct current 0 to 20 mA or 4 to 20 mA |
| Voltage | Direct voltage 0 to 10 V |
| Transmission behavior | Linear,freely scalable |
| Burden | Less than equal to 500ohm(at current output) |
| Load | Greater than equal to 10 k ohm (at voltage output) |
| Isolation voltage | 50V |
Features:
- Universal receiver for JUMO wireless measuring probe
- In combination with corresponding transmitter for RTD temperature probes, thermocouples, resistance/potentiometer, voltage input, or pressure measurement
- Wiring expenses are eliminated with modern wireless technology
- For up to 16 transmitters per receiver (can be freely combined)
- RS485 interface with Modbus protocol
- Up to four analog outputs/up to two switching outputs (relay)
- Operation directly on device or by using setup program on PC
- Customer-specific linearization (40 value pairs or 4th order polynomial)
- OnlineChart function for recording of measured values directly on the PC
View Complete Details
| Display Type | Digital |
| Type | Transmitter |
| Frequency | 50Hz |
| Material | Plastic |
| Packaging Type | Box |
| Function | RTD signal to a 4-20 mA output signal |
Since our commencement, we are immersed in presenting an elite array of Jumo Dtrans Temperature Transmitter.
Other Details:
- PH002
View Complete Details
| Accuracy | 0.1k |
| Brand | Jumbo |
| Voltage | 12-42V DC |
| Output | 4-20mA |
Two-channel temperature transmitter with HART®/Ex/SIL
The JUMO dTRANS T07 device series is a two-channel temperature transmitter with HART® communication which is available in B-head or in DIN rail housing version. The versions with Ex and SIL approval (IEC 61 508:2010) for SIL 2/3 (hardware/software) enable secure use in demanding process applications. The configurable transmitter transfers converted signals from RTD and TC sensors as well as resistor and voltage sensors to the galvanically isolated 4 to 20 mA current output with HART®-7 protocol. An internal sensor monitoring function and device error detection enables high measuring point availability.
- Easy-to-use configuration and startup
- Highest security in the process due to measuring point monitoring
- Flexible use due to universal measurement inputs and optional accessorie
View Complete Details
| Media Type | Gas |
| Display Type | Digital |
| Function | Measure the pressure inside your air tank |
| Packaging Type | Box |
As an authentic name of this domain, we hold expertise in providing a high-quality array of Jumo Electronic Pressure Switch.
View Complete Details
| Model Number | Aquis 500 |
| Display Type | Digital |
| Type | Transmitter |
| Brand | Jumbo |
| Material | ABS Plastic |
| Packaging Type | Box |
We are the leading organization in the market to offer the best quality range of Jumo Aquis 500 Temperature Transmitter.
Other Details:
Feature:
- Direct changeover toconductivity (μS/cm or mS/cm)
- resistivity (kΩ x cm or MΩ x cm)
- TDS measurement (ppm or mg/l)
- customer-specific table
- Automatic temperature compensation
- Large LC graphics display with background lighting
- Choice of display: large numbers, bar graph or trend display
- Calibration options according to measured variable: cell constant and temperature coefficient
- Calibration logbook
- Two-electrode cells (as standard) or four-electrode cells can be connected
- Pollution detection can be activated
- Auto-range operation
- IP67 enclosure protection (in surface mountable housing) IP65 enclosure protection (for panel mounting)
- Language changeover: German, English, French; further languages can be loaded through the setup program
- Using the setup program: user-friendly programming, plant documentation, additional languages can be loaded
View Complete Details
- Developed and Managed by IndiaMART InterMESH Limited