Kitek Technologies Private Limited

We are offering for Frequency Amplitude Modulation / Demodulation Trainer:

•  Test points are provided to analyze signals at various points.
• All ICS are mounted on IC Sockets.
• Bare board Tested Glass Epoxy SMOBC PCB is used.
• In-Built Power Supply of ±12V/350mA with Power ON indication
• Attractive Housed in ABS Plastic enclosures.
• Set of 2mm Patch cords for interconnections
• User's Manual with sample experimental programs

Additional Information:

• Item Code: BCT-02

We are offering for TDM Modulation / Demodulation Trainer:

•  Test points are provided to analyze signals at various points.
• All ICs are mounted on IC Sockets.
• Bare board Tested Glass Epoxy SMOBC PCB is used.
• In-Built Power Supply of +5V/150mA, ±12V/250mA with Power ON indication.
• Attractive Housed in ABS Plastic enclosures
• Set of 2mm Patch cords for interconnections.
• User's Manual with sample experimental programs.

Additional Information:

• Item Code: BCT-09

We are offering for PCM Modulation / Demodulation Trainer:

•  Test points are provided to analyze signals at various points.
• All ICs are mounted on IC Sockets.
• Bare board Tested Glass Epoxy SMOBC PCB is used.
• In-Built Power Supply of +5V/150mA, ±12V/250mA with Power ON indication.
• Attractive Housed in ABS Plastic enclosures.
• Set of 2mm Patch cords for interconnections.
• User's Manual with sample experimental programs.

Additional Information:

• Item Code: BCT-10

We are offering for FSK Modulation / Demodulation Trainer:

•  Test points are provided to analyze signals at various points.
• All ICs are mounted on IC Sockets.
• Bare board Tested Glass Epoxy SMOBC PCB is used.
• In-Built Power Supply of ±12V/250mA with Power ON indication.
• Attractive Housed in ABS Plastic enclosures.
• Set of 2mm Patch cords for interconnections.
• User's Manual with sample experimental programs.

Additional Information:

• Item Code: BCT-11

We are offering for DELTA Modulation / Demodulation Trainer:

• All interconnections are made using 2mm banana Patch cords.
• Test points are provided to analyze signals at various points.
• All ICs are mounted on IC Sockets.
• Bare board Tested Glass Epoxy SMOBC PCB is used.
• In-Built Power Supply of ±5V/150mA, ±12V/250mA with Power ON indication.
• Attractive Housed in ABS Plastic enclosures.
• Set of 2mm Patch cords for interconnections.
• User's Manual with sample experimental programs.

Additional Information:

• Item Code: BCT-14

We are offering for QPSK Modulation / Demodulation Trainer:

• Test points are provided to analyze signals at various points.
• All ICs are mounted on IC Sockets.
• Bare board Tested Glass Epoxy SMOBC PCB is used.
• In-Built Power Supply of ±12V/250mA with Power ON indication.
• Attractive Housed in ABS Plastic enclosures.
• Set of 2mm Patch cords for interconnections.
• User's Manual with sample experimental programs.

Additional Information:

• Item Code: BCT-17

We are offering for PPM Modulation / Demodulation Trainer:

•  Test points are provided to analyze signals at various points.
• All ICS are mounted on IC Sockets.
• Bare board Tested Glass Epoxy SMOBC PCB is used.
• In-Built Power Supply of ±12V/250mA with Power ON indication
• Attractive Housed in ABS Plastic enclosures.
• Set of 2mm Patch cords for interconnections
• User's Manual with sample experimental programs

Additional Information:

• Item Code: BCT-08

We are offering PAM Modulation & Demodulation Kit

• Provides Sine waveform output using IC 2206 having frequency varies from 100 Hz.-1.5 KHz with Amplitude adjustments up to Maximum 10V p-p

• Carrier Generation using IC 555 having variable output of 6KHz to 50KHz

• PAM -modulator circuit using IC 4066, Demodulator using Low Pass Filter.

Additional Information:

• Item Code: BCT-06

Additional Information:

• Item Code: BCT-18

Additional Information:

• Item Code: BCT-13

We are offering for Amplitude Modulation / Demodulation Trainer:

• Test points are provided to analyze signals at various points.
• All ICS are mounted on IC Sockets.
• Bare board Tested Glass Epoxy SMOBC PCB is used.
• In-Built Power Supply of ±12V/350mA with Power ON indication
• Attractive Housed in ABS Plastic enclosures.
• Set of 2mm Patch cords for interconnections
• User's Manual with sample experimental programs

Additional Information:

• Item Code: BCT-01

• Provides Sine waveform output variable from 1KHz.-1.2 KHz.
• Sampling Frequency generation output of 34 KHz.
• PWM -modulator circuit using IC555
• PWM -Demodulator using Low Pass Filter 

Additional Information:

• Item Code: BCT-07

Additional Information:

• Item Code: BCT-12