Kitek Technologies Private Limited

We are offering for Digital IC Trainer Kit.

Specifications:
Indicators:
•10 TTL/CMOS Logic Level Inputs with Dual Color LED indication for logic low and logic high.
•10 LED for output indication.

Clock Generator:
•Fixed Clock generation of 1Hz, 10Hz, 100Hz, 1KHz, 10KHz, 100KHz & 1MHz.

Pulse Generator:
•Logic Pulsar provides single pole double throw bounce fewer pulses of Low to High and High to Low transitions.

Logic Probe:
•Logic Probe facility provided with LED indicators to indicate Logic High, Low & Tri-state.

Bread Board Area:
•Four Distribution Strip of 100 tie points each totaling 400 tie points.
•Two Terminal Strip of 630 tie points totaling 1260 tie points.

Display:
•Four digit seven-segment LED display.

Power Supplies:
•Fixed DC Power Supply: +5V, ±12V.

Interconnections:
•All interconnections are made using 2mm banana Patch cords.
•All ICS are mounted on IC Sockets.
•Bare board Tested Glass Epoxy SMOBC PCB is used.
•Attractive ABS Plastic enclosures
•Set of 2mm Patch cords for interconnections.
•User's Manual with sample experimental programs.

Additional Information:

• Item Code: DTK-01A

We are offering Digital Trainer Kit with Supply:

Specifications:

Indicators

- 10 TTL/CMOS Logic Level Inputs with Dual Color LED indication for logic low and logic

high

- 10 LED for output indication.

Clock Generator

- Fixed Clock generation of 1Hz, 10Hz, 100Hz, 1KHz, 10KHz, 100KHz & 1MHz.

Pulse Generator

- Logic Pulsar provides single pole double throw bounce less pulses of Low to High and High to Low transitions

Logic Probe

- Logic Probe facility provided with LED indicators to indicate Logic High, Low & Tristate

Bread Board Area

- Four Distribution Strip of 100 tie points each totaling 400 tie points

- Two Terminal Strip of 630 tie points totaling 1260 tie points

Display

- Four-digit BCD seven-segment LED display

Power Supplies

- Fixed DC Power Supply: +5V, ±12V.

Interconnections

- All interconnections are made using 2mm banana Patch cords.

All ICS are mounted on IC Sockets.

Bare board Tested Glass Epoxy SMOBC PCB is used.

Attractive ABS Plastic enclosures.

Set of 2mm Patch cords for interconnections

User's Manual with sample experimental programs

Additional Information:

• Item Code: DTK-01D

We are offering for Digital IC Trainer Kit with Supply:

Specifications:

Indicators

- 10 TTL/CMOS Logic Level Inputs with Dual Color LED indication for logic low and logic high

- 10 LED for output indication.

Clock Generator

- Fixed Clock generation of 1Hz, 10Hz, 100Hz, 1 KHz, 10 KHz, and 100 KHz & 1 MHz.

Pulse Generator

- Logic Pulsar provides single pole double throw bounce less pulses of Low to High and High to Low transitions.

Logic Probe

- Logic Probe facility provided with LED indicators to indicate Logic High, Low & Tri-state.

Bread Board Area

- Two Distribution Strip of 100 tie points each totaling 200 tie points.

- One Terminal Strip of 630 tie points.

Display

- Three digit seven-segment LED display.

Sockets on board

- 14 Pin Socket- 8Nos.

- 16 Pin Socket- 3Nos.

- 20 Pin Socket- 1No.

One IC each of 7400, 7402, 7408, 7432, 7404, 7490, 7495, 7486, 7447 & Two Nos. of IC 7476.

Power Supplies

- Fixed DC Power Supply: +5V, ±12V.

Interconnections

- All interconnections are made using 2mm banana Patch cords.

All ICS are mounted on IC Sockets.

Bare board Tested Glass Epoxy SMOBC PCB is used.

Attractive ABS PLastic enclosures.

Set of 2mm Patch cords for interconnections.

User's Manual with sample experimental programs.

Additional Information:

• Item Code: DTK-02

We are offering for Analog IC Trainer Kit With Supply:

Specifications:

Indicators

- 4 LED's for output indication.

On board LINEAR IC's

- 4 Timer IC 555 (2 Nos.).

- Op-amp IC 741 (4 Nos.)

- Sample & Hold IC-398 (1No.)

- Opto Coupler MCT2E (1No.)

- Voltage Controlled Oscillator 566 (1No.)

- Comparator IC 710 (1 No.)

On board Interfaces

- Resistor Bank ranging from 10 ohm to 1M ohm (42 Nos.)

- Capacitor Bank ranging from 1Kpf - 1micro farad (23 Nos.)

- Voltage regulators one each IC-7805, 7905, 317.)

- Transistors one each NPN-BC547, PNP-BC188

- Diodes 1N 4007 (4 Nos.), Diode 1N4148 (2 Nos.) & Zener Diodes one each 1.2V, 5.6V, 7.5V

- 12V SPDT Relay with outputs NC, NO & Common terminated on 2mm banana sockets

- One 8ohm Speaker with outputs on 2mm banana sockets

- One five mm LED with outputs terminated on 2mm banana sockets

Potentiometers

- Variable potentiometers of 1K, 10K 100K provided on board

Bread Board Area

- Two Distribution Strip of 100 tie points each totaling 200 tie points

- One Terminal Strip of 630 tie points

Function Generator (using IC 8038).

- Provides Sine, Square and Triangular output waveforms.

- Frequency variable from 0-200 KHz in FIVE steps.

Power Supplies

- Fixed DC Power Supply: +5V, ±12V.

- Variable DC Power supply of +1.2V to +15V & -1.2V to –15V.

- AC Power Supply of 15V-0-15V

Interconnections

- All interconnections are made using 2mm banana Patch cords.

All ICS are mounted on IC Sockets.

Bare board Tested Glass Epoxy SMOBC PCB is used.

Attractive ABS Plastic enclosures

Set of 2mm Patch cords for interconnections

User's Manual with sample experimental programs

Additional Information:

• Item Code: DTK-03

We are offering for Analog Component Trainer Kit:
This is aSingle Board Trainer Kit which is widely used to train engineers to Develop / Study hardware for any Active & Passive components in laboratory. This board having Resistor bank, capacitor bank, Inductor bank, Regulators, Transistors, Diodes, Relay etc for experimenting the active &Passive component techniques.

Additional Information:

• Item Code: DTK-03B

We are offering for Basic Electronics Trainer:

This is a Versatile trainer which is capable of performing the role of Linear/Digital IC Trainer, Basic Electronics Trainer, network circuit & theorms trainer, rectifier, filter & regulator trainer, Transistor amplifier circuits trainer, oscillator & wave shaping circuits trainer, linear circuits trainer, electrical bridges trainer, power electronics trainer and digital electronics trainer.

Additional Information:

• Item Code: KMS-01

Additional Information:

• Item Code: DTK-08A

Additional Information:

• Item Code: DTK-08

Additional Information:

• Item Code: KMS-01D

Additional Information:

• Item Code: DTK-04

Additional Information:

• Item Code: DTK-06

Additional Information:

• Item Code: KMS-03