Krishna Agricultural Tools

Usage/Application	Agriculture
Brand	Leo
Adjustment	Cutting Height Can Be Adjusted From 1/2 To 8.2 Inches
Rear Roll	Running On Bearings On Both Sides
Wheels	Pressed Steel Studded Wheels Specially Fitted With Double Ball Bearings
Speed	8-16 Kph

Mowing a massive yard with a push reel mower is like bringing a knife to a gun fight. Gang reel mowers are built with a gang of three, five or seven reels, giving you a manicured lawn in a fraction of the time.

Usage/Application	Agriculture
Brand	Leo
Adjustment	Cutting Height Can Be Adjusted From 1/2 To 8 Inches
Speed	5-8 Kph
Wheels	Pressed Steel Studded Wheels Specially Fitted With Double Ball Bearings
Rear Roll	Running On Bearings On Both Sides

Specifications:

• Frame : The ganging frames have a common unit frame- the framework is so designed that there are no upward projections, thus enabling the mowers to run under low hanging trees etc. And cut grass will not adhere to choke the mowers.
• Chassis : Unbreakable, reinforced steel, firmly braced by axle and bottom block assembly
• Transmission : The Cylinder is driven at both ends from road wheels through hardened steel machined cut gears, totally enclosed in oil bath and ratchet drive to facilitate turning. Clutches fitted enables the cylinder to be taken out of gear and helps in transportation.
• Gear Drive Type : All Gears are fitted with bearing for longer life.
• Cutting Cylinder : Blades running on heavy duty ball bearings.
• Cutting Ratio : 1. At 08Kph 1. 0 Acre Per Hour / Unit 2. At 08Kph 3. 0 Acres Per Hour / 3 Unit 3. At 10Kph 1. 4 Acres Per Hour/ Unit 4. At 10Kph 4. 2 Acres Per Hour/3 Unit. 5. At 16Kph 2. 0 Acres Per Hour / Unit 6. At 16Kph 6. 0 Acres Per Hour / 3 Unit.
• Cutting Width : 1. 1 Unit - 76 Cm ( 2Ft 6In ) 2. 3 Unit-2. 10M ( 7Ft 0In )
• Overall Width 1. 1 Unit -1 22M ( 4Ft 0In) 2. 3 Unit-2. 59M ( 8Ft 6In)
• Overall Length 1. 1 Unit - 81 Cm ( 2Ft 8In) 2. 3 Unit-2. 59M ( 8Ft 6In)
• Clutch : A clutch is fitted to each gearbox to engage the drive to the cutting cylinder carriages unbreakable.
• Cutting Speed Recommended: Depending upon the around conditions, between 8-16 kph where conditions are not so good it is recommended to reduce

Usage/Application	Agriculture
Brand	Leo
Color	Green
Wheels	Pressed Steel Studded Wheels Specially Fitted With Double Ball Bearings
Rear Roll	Running On Bearings On Both Sides
Clutch	A Clutch Is Fitted To Each Gearbox To Engage The Drive To The Cutting Cylinder Carriage Unbreakable
Cutting Cylinder	Blades Running On Heavy Duty Ball Bearings
Cutting Ratio	3. 0 Acres Per Hour

Gang Mower