Kriti Industries (India) Ltd.

FiBERFLY is a unique telecom inner ribbed duct design that ensures blowing at an extra distance. The optimized geometry produces suction effect that multiples the pulling force and optical fiber cable floats in the HDPE Duct with enhanced velocity.

1. Elliptical Interior ribs geometry reduce surface contact with optical fiber cable during installation.
2. Also enhances the aerodynamics during blowing and provides an extra movement. It creates a jet engine like forward propulsion within the duct.
3. The stress on Optical fiber is contained and that means longer life span and low cable losses.
4. Long distance blowing means less coupling, less network deployment time which means low network buildup cost.
5. It also ensures use of longer cable length drums which means less splicing and optimized optical link budgets. Net saving on capital expenditure incurred on additional joint enclosures, Jointing pits and other accessories.
6. The operational expenditure gets reduced as less maintenance is required over a long haul duct routes.
7. Inner lubricant Silk layer coextruded with HDPE reduces coefficient of friction & enhances blowing performance.
8. Tested against stringent elongation break requirements which eliminate issues during HDD (Horizontal directional drilling).

FiBERiTRACK is a burry and forget tracing technology duct design with a coextruded and insulated tinplated copper wire that can pin point where ever the duct is buried. It works hand in hand with a GPS based Locating system that can produce real-time reports.

The non-intrusive measuring device, the receiver, takes measurements along the pipeline and plots the results directly onto the screen of the receiver. There is no need to carry extra logging and display devices. All the data is displayed and logged into the receiver and can be downloaded to a spread sheet or dedicated analysis program.

A +/- 3m accuracy GPS antenna is included with the system. It links to the receiver via Bluetooth radio link. The GPS enables the user to generate real time current gradient graphs and guides the user back to a point of interest by highlighting the users position on the graph.

1. Measures precise duct coordinates and the duct network can be plotted on the map.
2. Identifies if the duct is buried at the right depth which means confirmation on best practices of deployment
3. ABDs (As built drawing ) can be updated in real time
4. It comes with tracer wire- weather proof jointing connecters.
5. Inner lubricant Silk layer coextruded with HDPE duct reduces coefficient of friction & enhances blowing performance.

FiBERDUCT is a superior technology Pre lubricated (PLB) duct design, used for fiber optic & copper cable protection under challenging conditions. It can be blown in existing higher diameter duct (Duct in Duct) or can be used for burial application.

1. Permanent Inner lubricant ‘Silk layer” coextruded with HDPE reduces coefficient of friction & enhances blowing performance.
2. Longer cable pulls over multiple bends.
3. Protection against aerodynamic heating.
4. Enhanced Ultra violet (UV) Protection.
5. Anti termite & anti rodent (optional) capabilities.
6. Preinstalled cable in ducts reduces network rollout time (optional)
7. Tested against stringent elongation break requirements which eliminates issues during HDD (Horizontal directional drilling)
8. Approved by TEC /GR/TX/CDS-008/03, Mar-11 (With amndt No. 1 dated 28.03.2013). Fully compliant with all IS, ASTM & BIS standards
9. Available in 32/26 mm, 40/33 mm & 40/34.2 mm OD/ID sizes with Nylon ropes.
10. Preferred by majority of telecom operators , Infrastructure , Oil & gas , CATV and network builders

Kriti manufactures high quality HDPE duct accessories for your HDPE duct deployments in outside plant optical fiber networks. These products cater to the key onsite requirements such as ease of use, unavailability of tools on remote sites and lack of skilled man power. They together ensure superior customers experience during duct laying process, Duct integrity test (DIT) and even when cable is finally blown or pulled in the ducts.

Additional Information:

• Item Code: 225522
• Delivery Time: 9am to 9pm

Fiber to the Home (FTTH) Networks deliver high speed triple play service such as voice, video, data using a delicate Micro technology products and accessories for both direct buried as well as in building networks . There are several challenges in creating a passive optical network (PON) and we manufacture wide range of accessories which ensures optimum network rollout times, easy handling of Micro cable of various size like access till the drop in the premises.

Additional Information:

• Item Code: 225521
• Production Capacity: 100000
• Delivery Time: 9am to 9pm
• Packaging Details: bulks

FiBERWAYS is a next generation micro duct design for both in-building & direct burred micro cable installations for FTTH networks. Several Micro ducts are jacketed together and creating dedicated multiple pathways for fiber optic Fiber micro cable.

1. It increases network capacities manifold, offering easy Micro fiber installation that are capable of carrying high speed network traffic in small micro ducts.
2. Fiber WAYS can be installed at a very low depth using micro trenching technology.
3. The strong outer sheathing provides additional impact protection during installation.
4. Ideal for air blown fiber installations, upgrade your network on fly.
5. Extra ultra violet (UV) protection which ensures longer life span.
6. Anti termite & anti rodent protection.
7. Easy routing, branching and quick network provisioning. The mid span access of micro ducts means flexibility to provision fiber, especially for In -building riser & plenum duct installations.
8. Comes with Multi duct configuration(1,2,4,5,7,12 FiBERWAYS ) in sizes of 5/3.5 mm , 7/5.5 mm , 10/8 mm , 12/10 mm ,14/10mm .
9. Know the precise location through GPS based duct locating system.