Kwick Fix Solutions

• For concrete repairs - Spalled concrete of floors, columns, beams, chajja, slabs, parapets, etc.
• For waterproofing – Small roof terraces, sunken portions of toilets & bathrooms, chajja & lift pits, balconies
• As a bond coat – For bonding of new concrete to old concrete, masonry stone work, plastering
• For cladding – Fixing or re-fixing of slip bricks, tiles, stones & marble bedding
• As external rendering – Weatherproof & frost resistant render
• As bonding slurry coat for pinhole treatment on concrete surface

• Multipurpose – It is multipurpose & economical product, easy to use
• Cracking – It prevents cracking by improving flexural strength
• Hardness – Improves the hardness & prevents dust generation
• Shrinkage – Reduces drying & aging shrinkage cracks
• Bonding – Bond strongly to concrete, masonry, stonework, plasters, cementitious surfaces
• Erosion & corrosion – Improves erosion resistance & prevents corrosion
• Abrasion resistance – Improves abrasion resistance of the cement mix
• Grouting – Reduces viscosity of cement injection grout for better fluidity & bonding

KWICKSEAL GT50 is a self-adhesive Butyl tape with non- woven polyester or polypropylene fleece top & bottom with butyl adhesive , which is designed to create waterproof & vapor tight joint. It takes excellent adhesion on metals, glass, PVC timber, concrete, cement bonded particle boards, drywalls ceramics,masonry porous & non- porous surface & create waterproo & vapor-tight joints. Fleece bonds Excellently with paint , coating , plaster & other adhesives.

• One-pack system. Can be mixed with cement easily forming ahighly alkaline co-matrix.
• High alkalinity of cement reinforced by high alkalinity, high flexuralstrength and extra adhesion due to specially engineered polymersin POLYALK FIXOPRIME, gives long term protection to steelagainst corrosion.
• Treatment can be carried out at site. Coated bars do not sufferbond loss when embedded in concrete unlike epoxy coated barswhich are known to suffer substantial bond loss.

A. What is FOSROC LOKFIX P ?

Lokfix is a two-component polyester resin anchoring grout, meeting the requirements of BS EN 1504-6: Anchoring of reinforced steel bars.

Supplied in pre-measured quantities, the material cures quickly to give consistent, high performance anchorages.

Lokfix P : Thixotropic grade, 25 minute gel at 20°C for use in overhead or horizontal holes where the hole is up to 25 mm greater in diameter than the bar. The thixotropic nature of Lokfix P reduces flow of grout out of the hole.

• Rapid strength gain.
• Vibration resistant.
• Corrosion resistant.
• Non-expansive.
• Can be placed underwater