Kwick Fix Solutions

KWICKSEAL AT:

MULTI-PURPOSE, DO-IT-YOURSELF

SELF ADHESIVE BITUMEN SEALING TAPE

1. Description:

·         KWICKSEAL AT is cold-applied, flexible, rubberized bitumen based sealing tape.

·         It is a two layered 1.5mm polymer bitumen waterproofing layer with an aluminum foil to protect the material from impacts of UV radiation and to protect the adhesion of sealed elements.

·         The bottom side of KWICKSEAL AT is covered with an easily removable protective film.

·         KWICKSEAL AT is a convenient way to seal various cracks and joints.

·         It can also be used to insulate junctions for roofing repairs.

·         KWICKSEAL AT is specially designed for sealing substrates like metals, concrete, wood, glass, plastic (TPO, PP, PE) and bitumen.    

2. Packing and Size:

·        KWICKSEAL AT comes in width of 100mm.
The length of 10mtr is standard for all variants.
Thickness of 1.5mm is standard for all variants.
Packing is available in aluminum coated rolls.

3.Product Advantages:

·         Waterproof: Excellent adhesion and instantly watertight. 
Flexible: Excellent cold flexibility up to -25°C and maximum 100°C.
 Heat Resistant: Can be exposed to elements indefinitely. Versatile flashing around exterior protrusions.
 Cold applied: Eliminates fire hazard during application.
Do-it-yourself: Installs easily without any tar, torches, mops, glues or fasteners.
Saves time, material, labour and utility costs.
 Multipurpose and multi-surface application.

 4.Applications:

·        Rooftops,Drained Systems,Ventilation Junction,Cold  Pipes,Green Houses, Facades,Joints and corners,Building Cracks,Storage Tanks,Pre-Engineered Building Structures

5.Surface Preparation:

·       Surface should be cleaned of any dust, oil, loose particles and water. Application temperature should be above 5°C and below 80°C. Application should not be done on wet surfaces. The surface must be completely dry and clean for enduring results.

6.Product Applications:

·         Measure and cut KWICKSEAL AT to required length.
  For better sealing KWICKSEAL AT should overlap the hole or gap for 3-5cm from each side depending on the damage.

·       Remove the protective film.

·       Gently position KWICKSEAL AT to the surface and press it with a roller or hand.

·        Expel any air, especially on overlaps and at edges.

·        Installation on Cylindrical surfaces:  To repair damage on pipes, the tape is wound spirally (with an overlap on the previous turn).

Additional Information:

• Item Code: KwicksealNeo100
• Packaging Details: 24 pcs per carton

A. What is KWICKSEAL AT150

MULTI-PURPOSE, DO-IT-YOURSELF

SELF ADHESIVE BITUMEN SEALING TAPE

1. Description:

·         KWICKSEAL AT is cold-applied, flexible, rubberized bitumen based sealing tape.

·         It is a two layered 1.5mm polymer bitumen waterproofing layer with an aluminum foil to protect the material from impacts of UV radiation and to protect the adhesion of sealed elements.

·         The bottom side of KWICKSEAL AT is covered with an easily removable protective film.

·         KWICKSEAL AT is a convenient way to seal various cracks and joints.

·         It can also be used to insulate junctions for roofing repairs.

·         KWICKSEAL AT is specially designed for sealing substrates like metals, concrete, wood, glass, plastic (TPO, PP, PE) and bitumen.    

2. Packing and Size:

·        KWICKSEAL AT comes in width of 150mm.
The length of 10mtr is standard for all variants.
Thickness of 1.5mm is standard for all variants.
Packing is available in aluminum coated rolls.

3.Product Advantages:

·         Waterproof: Excellent adhesion and instantly watertight. 
Flexible: Excellent cold flexibility up to -25°C and maximum 100°C.
 Heat Resistant: Can be exposed to elements indefinitely. Versatile flashing around exterior protrusions.
 Cold applied: Eliminates fire hazard during application.
Do-it-yourself: Installs easily without any tar, torches, mops, glues or fasteners.
Saves time, material, labour and utility costs.
 Multipurpose and multi-surface application.

 4.Applications:

·        Rooftops,Drained Systems,Ventilation Junction,Cold  Pipes,Green Houses, Facades,Joints and corners,Building Cracks,Storage Tanks,Pre-Engineered Building Structures

5.Surface Preparation:

·       Surface should be cleaned of any dust, oil, loose particles and water. Application temperature should be above 5°C and below 80°C. Application should not be done on wet surfaces. The surface must be completely dry and clean for enduring results.

6.Product Applications:

·         Measure and cut KWICKSEAL AT to required length.
  For better sealing KWICKSEAL AT should overlap the hole or gap for 3-5cm from each side depending on the damage.

· Remove the protective film.

· Gently position KWICKSEAL AT to the surface and press it with a roller or hand.

· Expel any air, especially on overlaps and at edges.

· Installation on Cylindrical surfaces:  To repair damage on pipes, the tape is wound spirally (with an overlap on the previous turn).

B. Why Kwick Fix Solutions is Best Option for BITUMEN TAPE ?

1. KWICK FIX SOLUTIONS purchases material from the core company / factory or its authorised channel only. Hence, KWICK FIX SOLUTIONS sells only orginal & genuine products.

2. KWICK FIX SOLUTIONS has ready stock and fresh material available.

3. KWICK FIX SOLUTIONS is located in the hub of mumbai transport area. Hence, deliveries are prompt. 

4. KWICK FIX SOLUTIONS is a trusted brand and has a reputation of over 120 years in the market. The company is an extension of a 120 year old firm. 

KWICKSEAL AT:

MULTI-PURPOSE, DO-IT-YOURSELF

SELF ADHESIVE BITUMEN SEALING TAPE

1. Description:

·         KWICKSEAL AT is cold-applied, flexible, rubberized bitumen based sealing tape.

·         It is a two layered 1.5mm polymer bitumen waterproofing layer with an aluminum foil to protect the material from impacts of UV radiation and to protect the adhesion of sealed elements.

·         The bottom side of KWICKSEAL AT is covered with an easily removable protective film.

·         KWICKSEAL AT is a convenient way to seal various cracks and joints.

·         It can also be used to insulate junctions for roofing repairs.

·         KWICKSEAL AT is specially designed for sealing substrates like metals, concrete, wood, glass, plastic (TPO, PP, PE) and bitumen.    

2. Packing and Size:

·        KWICKSEAL AT comes in width of 50mm.
The length of 10mtr is standard for all variants.
Thickness of 1.5mm is standard for all variants.
Packing is available in aluminum coated rolls.

3.Product Advantages:

·         Waterproof: Excellent adhesion and instantly watertight. 
Flexible: Excellent cold flexibility up to -25°C and maximum 100°C.
 Heat Resistant: Can be exposed to elements indefinitely. Versatile flashing around exterior protrusions.
 Cold applied: Eliminates fire hazard during application.
Do-it-yourself: Installs easily without any tar, torches, mops, glues or fasteners.
Saves time, material, labour and utility costs.
 Multipurpose and multi-surface application.

 4.Applications:

·        Rooftops,Drained Systems,Ventilation Junction,Cold  Pipes,Green Houses, Facades,Joints and corners,Building Cracks,Storage Tanks,Pre-Engineered Building Structures

5.Surface Preparation:

·       Surface should be cleaned of any dust, oil, loose particles and water. Application temperature should be above 5°C and below 80°C. Application should not be done on wet surfaces. The surface must be completely dry and clean for enduring results.

6.Product Applications:

·         Measure and cut KWICKSEAL AT to required length.
  For better sealing KWICKSEAL AT should overlap the hole or gap for 3-5cm from each side depending on the damage.

·       Remove the protective film.

·       Gently position KWICKSEAL AT to the surface and press it with a roller or hand.

·        Expel any air, especially on overlaps and at edges.

·        Installation on Cylindrical surfaces:  To repair damage on pipes, the tape is wound spirally (with an overlap on the previous turn).

a. What is flashband self adhesive flashing tape
kwickseal at:
multi-purpose, do-it-yourself

self adhesive bitumen sealing tape

1. Description:

· kwickseal at is cold-applied, flexible, rubberized bitumen based sealing tape.

· it is a two layered 1. 5mm polymer bitumen waterproofing layer with an aluminum foil to protect the material from impacts of uv radiation and to protect the adhesion of sealed elements.

· the bottom side of kwickseal at is covered with an easily removable protective film.

· kwickseal at is a convenient way to seal various cracks and joints.

· it can also be used to insulate junctions for roofing repairs.

· kwickseal at is specially designed for sealing substrates like metals, concrete, wood, glass, plastic (tpo, pp, pe) and bitumen.     

2. Packing and size:

· kwickseal at comes in width of 100mm.
the length of 10mtr is standard for all variants.
thickness of 1. 5mm is standard for all variants.
packing is available in aluminum coated rolls.

3. Product advantages:
·waterproof: excellent adhesion and instantly watertight.  

flexible: excellent cold flexibility up to -25°c and maximum 100°c.
 heat resistant: can be exposed to elements indefinitely. Versatile flashing around exterior protrusions.
 cold applied: eliminates fire hazard during application.
do-it-yourself: installs easily without any tar, torches, mops, glues or fasteners.
saves time, material, labour and utility costs.
 multipurpose and multi-surface application.

 4. Applications:

· rooftops,drained systems,ventilation junction,cold  pipes,green houses, facades,joints and corners,building cracks,storage tanks,pre-engineered building structures

5. Surface preparation:

· surface should be cleaned of any dust, oil, loose particles and water.  application temperature should be above 5°c and below 80°c.  application should not be done on wet surfaces. The surface must be completely dry and clean for enduring results.

6. Product applications:

· measure and cut kwickseal at to required length.
  for better sealing kwickseal at should overlap the hole or    gap for 3-5cm from each side depending on the damage.

· remove the protective film.

· gently position kwickseal at to the surface and press it with a roller or hand.

· expel any air, especially on overlaps and at edges.

· installation on cylindrical surfaces:  to repair damage on pipes, the tape is wound spirally (with an overlap on the previous turn).