Labix Industries

Test Method

End Point with standard/factor Two Point Kinetics (Fixed Time) Multipoint Kinetics Multi standard up to 8

standards Biochromic, Dual Wavelength

Absorbance

Optical System Principle: Photometric Analysis with Interference Filter Absorbance     Range:         0.0000-3.0000 (Linearity:  ±1%, Repeatability:     0.001, Resolution: 0.0001) Spectral Range Selection: Automatic Via Filter Wheel Wavelengths: 340, 405, 505, 546, 578, 630 nm +2 Free Positions, ± 2  CML  Precision Light Source: 6 V 10 W Long Life tungsten Halogen Lamp

Detector: Photodiode

Operating Conditions

* Temperature: 10°C-37°C

* Relative Humidity: <85%

Quality Control

Lew-Jennings Chart Using Westgard's Rule Auto Drawing of QC figures

Test Parameter,

Test Parameters: Up to 300

Storage & Cpu

1,000 test results with editable patient information Storage of Quality Control And standard results

Display & Input System

4.3 inch color touch screen

Printer

Inbuilt Thermal Printer (57mm)

Range

COND. 200 µs to 1000 ms in 5 ranges.

TDS-200ppm to 1000 ppt in 5 ranges.

Accuracy

±0.3% F.S. 200 Micro Mhos/cm to 200m/

Mhos/cm.

±1% FS. In last range 1000m Mhos/cm

Resolution

Measuring

Mhos : 0.1 Micro mhos/cm

Frequency

1000 HZ

Temperature

Compensation

0 to 50° C

Cell Constant

0.4 to 1.5 adjustable

Function Selector

CHECK/TDS./ COND./CELL CONST.

CAL Function

For full scale adj. (at back panel)

Select at CHECK Position

Digital Display

3½digit LED display.

Power Supply

220V ± 10% HZ AC

Dimension

275x175 x75 mm(LXBXH)

Weight

2 Kg.

Accessories

TDS/COND. Cell (Dip Type),

Operation Manual, Dust Cover

Range

400-700nm

Display

Dual Digital Display

Filters

Built In 9 Digital Filters > 30000 Hours Life

Filters Wavelength

400nm, 430nm, 500nm, 520nm, 540nm, 580nm,

600nm, 620nm, 680nm

Display Mode

Absorbance & Wavelength

Detector

Silicon Photo Diode

Zero Adjustment

Auto zero

Accuracy

± 0.01 O.D.

Stability

±0.02 O.D. Per Hour

Light Source

Highly Accurate Laser Source

Amplifier

Micro Controller Based

Volume

1 ml. Minimum

Dimension

210 x 160 x 80 mm (LxBxH) Approx.

Weight

1.5 Kgs. (Approx)

Power

230V ± 10% AC, 50Hz

Battery Backup

6V Ni-Cd Re-Chargeable Battery

Accessories

Set of Test Tube - 6 Nos. Dust Cover - 1 No. Operational manual

Filters

8 Filters

Accuracy

± 0.02 O.D.

Reproducibility

± 0.01 O.D.

Stability

± 0.02 O.D. Per Hour

Light Source

6.8V, 0.3 AMP Tungsten Lamp/LED

Key Board

1 Soft touch key

Amplifier

I.C. Based

Detector

Selenium Photocell/Photodiode

Warm-up-Time

5 Minutes

Sample System Tubes

10 mm dia matched glass test

Power Source

230v ±10% 50Hz AC.

Accessories

Glass Test Tubes-5 Nos, Instruments Cover Operating Manual, Spare Lamp ( Fitted Inside)

Type

Microprocessor based

Readings

up to 10- 1000 NTU/JTU in 5 ranges

Range

Range-0 to 10 , 0 to 100,0 to200, 0 to 400 & 0

to 1000 NTU/JTU

Accuracy

± 3% of full scale

Test Tube System

30 mm clear glass test tube

Light Source

6 V

Lamp

Tungsten

Display

4 digit red LED display

Detector

Photocell/ Photodiode

Power

Supply 230 V ± 10% AC, 50Hz with Built-in voltage. stabilizer

Product

Digital Nephelometer

Display

3½ Digit LED

Detector

Photocell/Photodiode

Range

0 to 200 NTU in 2 ranges

Resolution

0.1 NTU

Accuracy

±2% FS±1 Digit

Sample System

60 x 25mm Clear Glass Test Tube

Light Source

LED

Power

230V±10%, 50Hz. AC

Dimensions

280 x 175 x 110 mm

Accessories

Test Tube Set, Operation Manual, Dust Cover

Rated Power

250W

Input Voltage

110/220-240v

Input Frequency

50Hz-60Hz

Output Power

< 250w

Frequency Tracking

Automatic tracking

Power And

Amplitude Adjust

0-100%

Packing Size(cm)

32 x 46 x 42cm

Machine Weight(kg)

7

Sonotrode Length

120mm

Sonotrode Diameter

8mm

Sonotrode Frequency

20KHz

Operation Panel Display

Time setting working data

Working Mode

1s-99 hours with pause function continuous working

Generator Protection

Built-in circuit, Overloading. Over

temperature, Antishort - circuit, Soft start

Cable Length

2M

Environment Temp

0-40°C

Relative Humidity

<=85% T=20°C

Max Temp. Of Sonotrode

100°C

Max Pressure

5Mpa

Treatment Capacity Of Liquid

<10L/H

Breaker Type For Batch

20ML-200ML

Accessories

Abs Soundproof Box, Stainless Steel Lifting Platform, 3 Fuse

Display

3½ Digit LED

Measurement :

Conductivity

Cond. Ranges :

Automatic 5 Ranges.

Range Selection :

Automatic in 5 Ranges

Temp. Range :

-5 to 110°C

Accuracy

Cond. : ±0.5% FS ± 1Digit Temp. ±0.1°C ± 1 Digit

Temp. Compensation

Auto 0 to 50°C (in Model LBX-515 ONLY)

Manual 0 to 50°C in (LBX-514)

Cell Constant :

Adjustable on Digital Display

Measuring Cell :

Platinum DIP Type

Cell Const measurement.

Auto

Power :

230V ± 10% AC

Dimensions

270x202x80 mm (LxBxH)

Weight

0.8kg Approx.

Accessories :

Conductivity Cell, Operation Manual, Dust Cover, Cell Stand, Temperature Probe

(With Model LBX-515)

Display

16x2 Lines Alfa Numeric Display.

Range

Two Ranges 0 to 200.0 & 200 to 1000 JTU/NTU

Accuracy

±3% of full Scale Deflection in 0-1000 JTU/NTU

Sample System

30mm Clear Glass Cuvettes

Light Source

6.8 Volt, 0.3 Amp Tungsten Lamp.

Detector

Photo diode

Memory

In built memory to retain both range standard

solution and last set value even after power loss

Calibration

With Formazine solution

Power Supply

230 V ± 10%, 50Hz..

Accessories

Cuvettes 30m dia, Operation Manual, Dust Cover

Display

3½ Digit LED

Measurement

Conductivity

Cond. Ranges

Automatic 5 Ranges 0-200µS. 0-2, 0-20, 0-200,

0-1000 mS

Range Selection

Automatic in 5 Ranges

Temp. Range

-5 to 110°C

Accuracy

COND. ±0.5% FS ±1Digit TEMP.±0.1°C ± 1Digit

Temp.compensation

Auto: 0 to 50 °C

Stirrer

Inbuilt Stirrer (with speed variable)

Cell Constant

Adjustable on Digital Display

Measuring Cell

Platinum DIP Type

Cell Const.

Measurement

Auto

Power

230V± 10% AC

Dimensions

270x202x80 mm (LXBXH)

Weight

0.8 Kg approx.

Accessories

Conductivity Cell, Operation Manual, Dust Cover,

Cell Stand, Magnetic Capsule

Filters

8 Filters

Accuracy

± 0.02 O.D.

Reproducibility

± 0.01 O.D.

Stability

±0.02 O.D. Per Hour

Light Source

6.8V, 0.3 AMP Tungsten Lamp/LED

Key Board

Potentiometer adjustment

Amplifier

I.C. Based

Detector

Selenium Photocell/Photodiode

Warm-up-Time

5 Minutes

Sample System Tubes

10 mm dia matched glass test

Power Source

230v ±10% 50Hz AC. x 12V Rechargeable Battery

Accessories

Glass Test Tubes-5 Nos, Instruments Cover Operating Manual, Spare Lamp ( Fitted Inside)

Filters

8 Filters

Accuracy

± 0.02 O.D.

Reproducibility

± 0.01 O.D.

Stability

±0.02 O.D. Per Hour

Light Source

6.8V, 0.3 AMP Tungsten Lamp/LED

Key Board

Potentiometer adjustment

Amplifier

I.C. Based

Detector

Selenium Photocell/Photodiode

Warm-up-Time

5 Minutes

Sample System Tubes

10 mm dia matched glass test

Power Source

230v ±10% 50Hz AC. x 12V Rechargeable Battery

Accessories

Glass Test Tubes-5 Nos, Instruments Cover Operating Manual, Spare Lamp ( Fitted Inside)

pH Measurements

Display

3 Digit Red Led Display

Display Modes

% T, O.D. AND 3 Concentration

Modes C1, C2, C3

Zero Adjustment

Automatic (Without Knob Rotation)

Accuracy

± 0.02 O.D.

Stability

+0.02 O.D.Per Hour.

Light Source

6.8 Volt, 0.3 Amp Tungsten Lamp/LED

Amplifier

Micro Controller Based.

Memory

In built Memory to retain Last "K" Factor

For Concentration Even After Power Loss.

Sample Volume

1 ml. Minimum

Power Supply

230V+10%, 50 Hz

Accessories

Glass Test Tubes-5 Nos, Instruments Cover

Operating Manual, Spare Lamp ( Fitted Inside)

Filters

8 Filters

Accuracy

± 0.02 O.D.

Reproducibility

± 0.01 O.D.

Stability

±0.02 O.D Per Hour

Light Source

6.8V, 0.3 AMP Tungsten Lamp/LED

Key Board

Potentiometer Adjustment

Amplifier

I.C.Based

Detector

Selenium Photocell/Photodiode

Warm-up-Time

5 Minute

Sample System Tubes

10 mm dia matched glass test

Power Source

230v ±10% 50Hz AC.

Accessories

Glass Test Tubes-5 Nos, Instruments Cover Operating Manual, Spare Lamp ( Fitted Inside)

Product

Digital Turbidity Meter

Display

3½ Digit LED

Detector

Photocell / Photodiode

Range

0 to 1000 NTU in 2 ranges

Resolution

1NTU

Accuracy

+3% FS ±1 digit

Sample System

60 x 25mm Clear Glass Test Tube

Light Source

LED

Power

230V±10%, 50Hz. AC

Dimensions

280 x 175 x 110 mm

Accessories

Test Tube Set, Operation Manual, Dust Cover

Display

3 Digit Red Led Display

Display Modes

% T, O.D. And 3 Concentration Modes C1,C2,C3

Zero Adjustment

Automatic (without Knob Rotation)

Accuracy

± 0.02 O.D.

Stability

±0.02 O.D. Per Hour.

Light Source

6.8 Volt, 0.3 Amp Tungsten Lamp/led

Amplifier

Micro Controller Based

Memory

In Built Memory To Retain Last "k' Factor For

Concentration Even After Power Loss.

Sample Volume

1 ml. Minimum

Power Supply

230v ±10%, 50hz.

Accessories

Glass Test Tubes(5 Nos),instruments Cover, Operating Manual, Spare Lamp ( Fitted Inside).

Display

3½ Digit LED

Measurement :

Conductivity

Cond. Ranges :

Automatic 5 Ranges.

Range Selection :

Automatic in 5 Ranges

Temp. Range :

-5 to 110°C

Accuracy

Cond. : ±0.5% FS ± 1Digit Temp. ±0.1°C ± 1 Digit

Temp. Compensation

Auto 0 to 50°C (in Model LBX-515 ONLY)

Manual 0 to 50°C in (LBX-514)

Cell Constant :

Adjustable on Digital Display

Measuring Cell :

Platinum DIP Type

Cell Const measurement.

Auto

Power :

230V ± 10% AC

Dimensions

270x202x80 mm (LxBxH)

Weight

0.8kg Approx.

Accessories :

Conductivity Cell, Operation Manual, Dust Cover, Cell Stand, Temperature Probe

(With Model LBX-515)

pH

Range

0 to 14 pH

Resolution

0.01 pH

Accuracy

±0.01 pH ± 1 Digit

Slope Adjustment

±1 digit 80% to 120% by default 100%

Temp. Compensation

0 to 100°C Auto with temp probe/Manual with keys

Auto Buffer

Recognition

4.00 pH., 7.00 pH., 9.20 pH

Calibration

5 point (Programmable)

Conductivity-TDS-SAL

Range

Conductivity 0.00 µ/km to 1000 mS Auto ranging

TDS

0.0 ppm to 1000 ppt Auto ranging

SAL

0.0 ppt to 50 ppt Auto ranging

Resolution

Conductivity 0.01 uS on the lowest range

TDS

0.1 ppm

SAL

0.2 ppt

Accuracy

±0.5% of range ±1 digit

Measuring Cell

Platinum DIP type

Temp. Compensation

0 to 100°C Automatic with temp probe

Temperature

Range

-50.0 °C to 200°C

Resolution

0.1°C

Accuracy

± 0.1% of range ±1 digit

Calibration

two point manual

Sensors

PT 100 probe

Data Entry

By six soft touch keys with audible sound

Storage

1000 samples

Interface

USB

Print Format

All Data & Date wise (Programmable)

Error Indication

pH ERROR. ORP ERROR. CAL ERROR & T-ERROR

Display

3½ Digit LED

Measurement

TDS

TDS Ranges

Automatic 5 Ranges

Ranges 0 to 200 ppm, 2000 ppm, 20ppt,200ppt

Stirrer

Inbuilt Stirrer (with speed variable)

Range Selection

Automatic in 5 Ranges

Accuracy

TDS ±0.5% FS± 1Digit

Temp. ±1°C ± 1Digit

Temp. Compensation

MANUAL 0 to 50 °C

Cell Constant

Adjustable on Digital Display

Measuring Cell

Platinum DIP Type

Cell Const.

Auto Measurement

Power

230V+ 10% AC

Dimensions

270x202x80 mm (LXBXH)

Weight

0.8 Kg approx.

Accessories

TDS Cell, Operation Manual, Dust Cover, Cell Stand Magnetic Capsule