Labmatrix Manufacturing LLP

Maximum RPM: 6000

Maximum RCF [g]: 2000 X g

Timer: No

Variable Speed: No

Noise Level: <55 db

Calibration: Yes

• o    Oil Free Diaphragm Vacuum Pump
• o    Max. Flow – 45LPM,
• o    Vacuum-22’’Hg (554 mm)
• o    Max. Pressure – 35 psig, 1/8 HP
• Warranty: 1 year from the date of supply 

SPECIFICATIONS:

· Insulation: Gap between the mantle and outer chamber is filled with glass wool insulation.

· Front Panel: Provided with on-off switch, energy control knob and pilot lamp.

SPECIFICATIONS:

· Outer: Made of mild steel and finished with powder coated.

· Insulation: Gap between the mantle and outer chamber is filled with glass wool insulation.

· Front Panel: Provided with on-off switch, energy control knob and pilot lamp.

· No. of Mantles: 6 Nos. suitable for 250ml flasks.

We are prominent names in this domain for offering a wide range of Hot Plate.

Specification:

· Outer: Made of mild steel and finished with powder coated. 

· Insulation: By Ceramic Fibre. 

We are engaged in presenting an extensive range of Hotplate Magnetic Stirrer to our clients within the time limit.

Specification:

• Microprocessor Based
• Stirring Volume: 0-2L
• Stirring Speed: 0 to1250 RPM
• Top Plate Size in mm: 135x135
• Top Plate Material: Stainless Steel
• Accuracy: ±1^oC(<100^oC ) ±3^oC(<300^oC)
• Included: Stir Bar, Temperature Probe

We are offering a wide gamut of Ceramic Hotplate Magnetic Stirrer in the market as per customer requirements. 

Specification:

• Speed (RPM): 100-2000
• Max. Volume (ml): 5000
• Max Temp. ( Plate Surface): 300^oC
• Power supply: 220V / 50Hz

SPECIFICATIONS:

· HEPA Filter: 99.999 % efficiency for particles >0.3 μm

· Pre-Filter: 85 % efficiency for particles >0.5 μm (Washable)

· Cabinet: CRC Sheet Fabrication with powder coating

· Accessories: Supplied with manometer, electrical control Switches for illumination light on, UV Light on and Blower on.

·         Temperature Range: -20°C to 40°C

·         Max. Speed: 15000 RPM (200-15000 RPM), increment: 10 RPM

·         Max. RCF: 21380 X g, increment: 10 X g

·         Rotor: 2ml X 24, 0.5ml X 36, PCR8 serial tubes (24 X 1.5ml / 2.0ml tubes) 10.2 and 0.5 with adaptors.

·         Run Time: 30sec ~ 99min ~ HOLD (Continuous operation)

·         Refrigerant: HFC134a

·         Driving Motor: Brushless motor

·         Safety Devices: Dual door interlock, Over-speed detector; Over-temp. detector, Automatic internal diagnosis

·         Noise level (dB): ≤ 56db

·         Temp Range: -10º C to 100º C

·         Temperature Control: PID +

·         Temperature Stability: ± 0.3°C

·         Display: Dual 7 segment LED

·         Display Resolution: 0.1°C

·         Heater Capacity: 2000 watts

·         Cooling Capacity @ 19°C: 320 watts

·         Pump flow rate: 12.5 liters / min

·         Bath opening [W X L X D mm]: 110 X 110 X 150 / 130 X 120 X 150 - for Vertical model

·         Dimensions [W X L X H mm]: 420 X 420 X 360 / 230 X 460 X 640 - for Vertical model erature

Size Range: 0.3 to 10.0 μm

Channel Sizes: Standard: 0.3, 0.5, 0.7, 1.0, 2.0, 5.0 μm; Standard: 0.3, 0.5, 1.0, 3.0, 5.0, 10.0 μm; Standard: 0.3, 0.5, 0.7, 1.0, 2.5, 5.0 μm; Standard: 0.3, 0.5, 1.0, 2.5, 5.0, 10.0 μm; Optional: additional size channels available (Please specify Channel as per your application while ordering)

Counting Efficiency: 50% @ 0.3 μm; 100% for particles >0.45 μm per JIS

Concentration Limit: 4,000,000 Particles/ft³ @ 5% coincidence loss

Light Source: Long Life Laser Diode

Zero Count Level: <1 count / 5 minutes (<2 particles / ft³) (per ISO 21501-4 & JIS)

Size Resolution: <15% at 0.5 μm (per ISO 21501-4)

Flow Rate: 0.1 CFM (2.83 LPM)

Flow Rate Control: Automatic flow control

Calibration: NIST traceable

Sample Probe/Tubing: Isokinetic sampling probe and probe for tubing

Sampling Modes: Manual, automatic, ISO 5-9 at 0.3-5.0 µm excluding ISO 5 at 5.0µm, GMP A-C in operation, A-D at rest, cumulative, differential, count/concentration

Reports: ISO 14644-1 and EU GMP

Sampling Time: 1 second to 99 minutes 59 seconds (configurable)

Sampling Frequency: 1 to 9999 cycles or continuous (configurable)

Sample Output: Internal HEPA filter

Vacuum Source: Internal Pump

Communication Interface: USB

Data Storage: 10,000 sample records

Security: 2-level password protection

Alarm: Counts, low battery, flow and laser status

Display: 3.5″ (8.9 cm) 320 x 240 Color LCD

Power: DC 5V 1A (Mini USB TYPE-B)

Battery: Removable AA Ni-MH

Environmental Sensors: Optional temperature/humidity probe at extra cost

Dimensions (L x W x H): 7” x 3.5” x 1.9” (17.8 cm x 9 cm x 4.7 cm) does not include probes

Weight: 1.26 lb (.57 kg)

Standards: ISO 21501-4 and JIS B9921

SPECIFICATIONS:

Size Range: 0.3 to 5.0 μm

Channel Sizes: Channel 1: 0.3/0.5 μm; Channel 2: 0.5/1.0/2.0/2.5 μm; Channel 3: 5.0 μm (Please specify Channel as per your application while ordering)

Counting Efficiency: 50% @ 0.3 μm; 100% for particles >0.45 μm per JIS

Concentration Limit: 4,000,000 Particles/ft³ @ 5% coincidence loss

Light Source: Long Life Laser Diode

Zero Count Level: <1 count / 5 minutes (<2 particles / ft³) (per ISO 21501-4 & JIS)

Size Resolution: <15% at 0.5 μm (per ISO 21501-4)

Flow Rate: 0.1 CFM (2.83 LPM)

Flow Rate Control: Automatic flow control

Factory Calibration: NIST traceable

Sample Probe/Tubing: Isokinetic sampling probe and probe for tubing

Sampling Modes: Manual, automatic, ISO 5-9 at 0.3-5.0 µm excluding ISO 5 at 5.0µm, cumulative, differential, count/concentration

Sampling Time: 1 second to 99 minutes 59 seconds (configurable)

Sampling Frequency: 1 to 1,999 cycles or continuous (configurable)

Sample Output: Internal HEPA filter

Vacuum Source: Internal Pump

Communication Interface: USB

Data Storage: 8,000 sample records

·         Range:

o    PH:  -2 to 20.000

o    Conductivity: 0-20, 0-200µS, 0-2, 0-20, 0-200mS

o    TDS: 0-20, 0-200ppm, 0-2, 0-20, 0-200ppt

• Temperature: -5-110^oC

·         Accuracy:

o    PH: ±0.01pH, ±1 Digit

o    Conductivity: ±0.5% FS, ±1 Digit

o    TDS: ±0.5% FS, ±1 Digit

o    Temperature : ±0.1°C

·         Resolution:

o    PH: 0.01pH

o    Conductivity: 0.01µS

o    TDS: 0.01 ppm

o    Temperature: 0.1°C

·         Cell constant:

o    Conductivity: Adjustable (0.05-0.5)

o    TDS: Adjustable (0.05-10.5)

·         Temperature compensation:

o    PH: Auto/Manual (-5 to 100^oC)

o    Conductivity: Auto/Manual (-5 to 100^oC)

o    TDS : Auto/Manual  (-5 to 100^oC)

·         Power : 12V DC using 230±10% AC Adaptor

·         Accessories Included: pH Combination Electrode (Glass) Conductivity/TDS Cell ( Glass)  (K=1.0), Temperature Probe, Electrode Stand, Mains Lead, Operation Manual

·         Warranty: 1 Year from the date of supply

GRAIN: Paddy, Rice, Corn, Wheat

Display: 4 digits, 10mm LCD

Range: Moisture Content: 8~20%, Temp.: -10~65^oC

Accuracy: Moisture: +1%, Temp.: +0.8

Resolution: 0.1

Battery: 4x1.5AA (um-3)

Rotor Capacity: 12 place closed rotor with metal safety lid

Maximum RPM / RCF (g): 15000 / 15596 X g

Time Setting: 1.30 mins Timer

Imbalance Detection: Imbalance Detection with auto cut off

Noise Level: <60 db

Motor Type: (BLDC) Brushless DC motor

Rotors and Adaptors

(included in standard pack): 12 place X 1.5 / 2.0 ml

Reduction adaptors for 0.2 / 0.4 ml Micro tubes

Optional Rotors: PCR Strip Rotor (2 X 8 X 0.2 ml with metal safety lid)

·         No. of Jars: 4

·         Speed Range: 25 to 200rpm

·         Pre-set Programs: 2

·         Timer: 0 to 99minutes

·         Controls Keypad: Touch sensitive

·         Digital Display: LED

·         Power: 230V, 50Hz, 100W

·         Handy Hardness Tester is designed to use in QC/ QA/ R & D / Tableting / Production, In-process etc. for taking quick reading of hardness of tablets.

·         It measures Hardness in Kg. per. Sq. cm.

·         It is made of brass parts heavily chromium plated and has a scale of 0-20 kg. Per. sq. cm.  with each division marked for 1 kg., readability 0.5 kg. sq. cm

· COD Digester is suitable for COD method for monitoring wastewater influent and effluent, industrial process water, and more.

· This instrument is used by Pollution control Labs.

· Outer Cabinet Made of mild steel duly coated.

· Construction Double walled construction with insulation for minimum heat losses increase the efficiency of the system.

· Temperature Controller Solid state digital temperature controller, appropriate heater & insulation selection assure uniformity in all the samples.

· After digestion, analyze the sample with either colorimetric or titrimetric method.

• Selectable Temp RT +5C to 150C
• Resolution +/- 0.1C at the Pt100
• Stability Probe Type Pt100 A class
• Selectable time 0000 to 99.59 (Hr Min)
• Heating Block Aluminum , 145 x 55 x 48mm
• No. of Tube Holes 30 holes, 16.2mm Dia x 40mm Depth
• Materials, Housing MS Powder Coated
• Heating up from 20C to 150C in 12min
• Power 750W
• Power Supply 230V/50-60Hz

· COD Digester is suitable for COD method for monitoring wastewater influent and effluent, industrial process water, and more.

· This instrument is used by Pollution control Labs.

· Outer Cabinet Made of mild steel duly coated.

· Construction Double walled construction with insulation for minimum heat losses increase the efficiency of the system.

· Temperature Controller Solid state digital temperature controller, appropriate heater & insulation selection assure uniformity in all the samples.

· After digestion, analyze the sample with either colorimetric or titrimetric method.

• Selectable Temp RT +5C to 150C
• Resolution +/- 0.1C at the Pt100
• Stability Probe Type Pt100 A class
• Selectable time 0000 to 99.59 (Hr Min)
• Heating Block Aluminum , 145 x 55 x 48mm
• No. of Tube Holes 30 holes, 16.2mm Dia x 40mm Depth
• Materials, Housing MS Powder Coated
• Heating up from 20C to 150C in 12min
• Power 750W
• Power Supply 230V/50-60Hz

·      electable deg C or deg F

·      Selectable Body & Surface Temperature

·      Range (body) 32 to 42.5 deg C / 89.6 to 108.5 deg F

·      Range (surface) 0 to 60 deg C / 32 to 140 deg F

·      Memory for 32 Records

·      Display Resolution 0.1 deg C (0.1 deg F)

·      Backlit LCD Display

·      Measuring Distance 5-15 cms

• Response Time 0.5 secs

Additional Information:

• Delivery Time: 2 Weeks