Lab Sales Corporation

• Very fast response makes a great difference.Even repeated weighing work is comfortable and efficient.

• The BL Series provides a high-precision electro-magnetic system that is just as compact as a portable scale.

• The high stability mode of the BL Series produces steady readings even under poor environmental conditions

• Percentage mode, and various unit conversions are standard. Switching between these functions and units is a simple key-touch.

• Remaining weighing capacity can be seen at a glance. Especially helpful when filling containers on the balance.

• Equipped with square pan for ease of operation.

• Optional EP-80 / 90 printer can be connected directly to BL Series balances to produce reports. An optional interface is available to enable communication with a PC.

• Eliminate manual entry, and all the weighing data are saved automatically in a safe database without transcription mistakes.
• Reports appropriate for weighing methods, such as the mass variation test, drying weight loss test and particle size test, can be created automatically after the measurement. In addition,customized reports featuring such information as system conformance, content uniformity and elution tests together with the analysis results obtained by HPLC, etc. can be created.

Compliant with the Latest Data Integrity Guidance

• Weighing results can be automatically saved in the database together with other information, including sample ID, operator name, operation date and series number of instrument used.This enables quick data searching based on sample information.
• It allows setting up user authority to ensure only the authorized user can create a template for weighing.
• It prevents improper manipulation, unintended overwriting and deletion of data. In addition,measurement results, all the operation histories and reasons will be saved in the database as log files.

The pH level of mobile phase (eluent) solutions used in liquid chromatographs is adjusted to improve separation of components and extend the life of columns. This pH adjustment process is performed using a buffer solution. Currently, the most common method is using a pH meter to measure the pH as the solution is prepared; however, this process requires considerable time and effort, which can cause operational bottlenecks.An alternative method does not require a pH meter. It involves preparing solutions by weighing fixed theoretically calculated quantities of an acid and base.AP series supports weighing these acids and bases. If the type and quantity of the buffer solution are specified, the balance displays the type and quantity of sample that should be weighed. Then the buffer solution can be prepared easily by adding water to the specified quantity of sample weighed accordingly.

Display capture function

Weighing display can be recorded into USB memory in BMP format. User name, date/time, and setting can be shown with display information.The user name, time, measurement conditions, pass/fail judgments, and other information displayed on screen can be saved as is, enabling the recording of measurements, and checks after measurements.

Numeric keypad

Connecting a common external numeric keypad makes it easier to enter numeric values. This is especially useful for entering the mass value of weights, setting upper/lower limit values for the comparator function, or entering the sample count during piece counting mode.

• Fast Response Compact UniBloc mechanism and digital processing technology produce fast response and stability at the same time.
• Environmental adjustment Microprocessor digital control can be set to automatically provide the most suitable data processing for the installation environment and weighing application.

Automatic Span Calibration

Span calibration is essential for accurate measurement in precision weighing to adjust for the effects of even small changes
in ambient temperature. AUW-D/AUW/AUX models have a built-in motor driven calibration weight to automate this
necessary operation. The balance can be set to take care of the calibration itself, leaving the operator to concentrate on
measurement work.

Fully-automatic calibration by temperature Room temperature change detection

The balance detects variations in the ambient temperature that influence accuracy and automatically performs calibration to compensate it. (AUW-D/AUW/AUX models) This great feature has been provided by Shimadzu since as early as 1985.

Fully-automatic calibration at user pre-set times

The balance automatically performs calibration at selected times, up to three times a day(e.g., before starting work, during lunch-break, or after work). (AUW-D/AUW models)

Span calibration at any time Touch-key calibration

Automated calibration can be started by pressing keys.
(AUW-D/AUW/AUX models)Also, your external calibration weights can be used for span calibration. (All models)

Application Support

• Efficient filling or dosing work "Pouring mode" brings very fast response with even a very small amount of sample added.
  Suitable for filling or dosing works.
• Formulation mode Convenient for making many measurements of minute samples and seeking the total mass.
• Specific Gravity Measurement Installing the optional SMK-401 specific gravity kit transforms the balance into a dedicated instrument for measuring specific gravity or density. Specific gravity measurement software is already installed in the Shimadzu balance.
• Below-weigh Hook for Hanging Measurement Measurement which cannot be performed within the weighing chamber is possible using the hook provided as a standard component.
• Piece Counting and Unit Conversion In addition to piece counting, the balance can also perform weight measurement as percentages and in a variety of mass units, such as carat.
• Interval Timer Data can be automatically output at time intervals set in the range from 1 second to 99 minutes 59 seconds. This function can be also combined with WindowsDirect. (AUW-D/AUW/AUX models)

User-friendly Features

User-friendly Weighing Chamber

• The large dimensions of the weighing chamber allow easy measurement of even tall flasks. Equalization in temperature before measurement is essential in precision weighing. This is easy with the extra space allowing samples to be kept inside the chamber. Weighing work is made easy by the smooth door movement.The doors can be detached to allow the chamber to be cleaned with ease and it is also possible to remove, clean or replace the door rail.

Easy Level Adjustment

• Level adjustment, particularly important in installing an analytical balance, can be performed with ease using an easy-to-view level gauge at the front of the balance and large level screws.

Metal Housing

• The aluminum die-cast housing offers lasting high quality exterior, r pr otection of the core mechanism, and ease of cleaning.

• Built-in calibration weight
• PSC
• Clock-CAL
• Built-in clock
• GLP/GMP/ISO calibration report
• WindowsDirect
• Formulation mode
• Interval timer output
• RS-232 I/F
• Specific gravity measurement software, piece counting, % display
• Analog display

• Built-in calibration weight
• PSC
• Clock-CAL
• Built-in clock
• GLP/GMP/ISO calibration report
• WindowsDirect
• Formulation mode
• Interval timer output
• RS-232 I/F
• Specific gravity measurement software, piece counting, % display
• Analog display
• Backlighted display

• Built-in calibration weight
• PSC
• Clock-CAL
• Built-in clock
• GLP/GMP/ISO calibration report
• WindowsDirect
• Formulation mode
• Interval timer output
• RS-232 I/F
• Specific gravity measurement software, piece counting, % display
• Analog display
• Backlighted display

• Built-in calibration weight
• PSC
• Clock-CAL
• Built-in clock
• GLP/GMP/ISO calibration report
• WindowsDirect
• Formulation mode
• Interval timer output
• RS-232 I/F
• Specific gravity measurement software, piece counting, % display
• Analog display
• Backlighted display

• Built-in calibration weight
• PSC
• Built-in clock
• GLP/GMP/ISO calibration report
• WindowsDirect
• Formulation mode
• Interval timer output
• RS-232 I/F
• Specific gravity measurement software, piece counting, % display
• Analog display

• WindowsDirect
• Formulation mode
• Interval timer output
• RS-232 I/F
• Specific gravity measurement software, piece counting, % display
• Analog display

• WindowsDirect
• Formulation mode
• Interval timer output
• RS-232 I/F
• Specific gravity measurement software, piece counting, % display
• Analog display

• Built-in calibration weight
• PSC
• Built-in clock
• GLP/GMP/ISO calibration report
• WindowsDirect
• Formulation mode
• Interval timer output
• RS-232 I/F
• Specific gravity measurement software, piece counting, % display
• Analog display