Lab Soul, India

• Thermometer 360° C
• Capillary/Tube Set c
• Cooling Plug

Additional Information:

• Item Code: LSI028
• Production Capacity: 500 per month
• Delivery Time: week time

Additional Information:

• Production Capacity: 500
• Delivery Time: within a week

High pressure electrically heated vertical steam sterilizer/Autoclave is used for sterilization of surgical instruments, Dressing Material, Linen, Rubber & Plastic Material by means of saturated steam under pressure of 15 to 20 psi (adjustable) apart from health services. It is also used in Scientific Research Institution & Universities.

Construction:
Sturdy double walled construction with boiler/inner chamber is made of Stainless Steel 16 SWG sheet & outer shell is made of Mild Steel finished with powder coated paint or completes Stainless steel as per requirement. The boiler & outer shell is provided with air insulation. Lid is made of brass with Stainless Steel inside & is tightened all around by wing nuts, jointless Neoprene rubber gasket. Autoclave is fitted with water level arrangement, dial pressure gauge, steam release valve, spring loaded safety valve, ISI marked immersion type heating element & Stainless Steel basket with stand.

Contents:

• Main elementary unit Double walled.
• Casted brass lid with Stainless Steel lining.
• Pressure gauge 0 to 30 PSI.
• Air/Steam release cock.
• Spring loaded safety valve.
• Immersion type heating elements.
• Drum (Basket) with try pot stand.
• Cord & Plug.

Lasin Tray Dryers are used for the best drying results in conventional process. Drying oven is specially designed for Bulk Drug, Pharmaceuticals, Chemicals, Food, Paints, Textiles & other industries. It is well accepted for economical drying of powder, granules, food material & chemicals.  

Optional Accessories:

• Air Circulating Fan

• Timer 0-24 hours

• Digital temp. Indicator-Cum-Controller

• Microprocessor PID Digital Temp. Indicator-Cum-Controller

• Trays  of 812 x 406 x 31mm size

Additional Information:

• Production Capacity: 100 Pc.s/Month
• Delivery Time: 7 days

• Razor 120 mm with back and handle in box - 1
• Honing Stone in box - 1 No.
• Object holders (set of 3) - 1 Set iv) Oil Can and Dust Cover.

This Apparatus determines the melting point of variety of products. It consists an accepting 3 capillaries & a thermometer. It has a built in electric heating element.  The temperature is controlled by energy regulator. Maximum temperature can be 350°C. An adjustable lens is provided for viewing exact melting point. Also available with digital temperature indicator. 

Optional Accessories:

• Thermometer 360° C
• Capillary/Tube Set 
• Cooling Plug

Additional Information:

• Production Capacity: 1000 pcs/month

Double walled convection heated units. Outer body is constructed out of thick MS sheet, duly pre-treated with primers for rust proofing and painted with air drying paint/stove enamel/powder coating. The inside chamber of the unit is made of heavy gauge stainless steel sheet of grade ss-304. The unit is provided with top opening cover. Temperature range from room temperature to 100°C. Temperature is controlled by Electronic Digital Temperature Controller-cum-indicator with accuracy of plus minus ± 0.5°C. Double walled inside made of stainless steel 304 Qlty. and outside mild steel painted in epoxy powder coating. Oscillating tray in riding on ball rollers. 

Optional Accessories: 

• Digital Temperature Indicator-cum-Controller.
• PID Digital Temp. Indicator-cum-Controller
• Digital Temperature Indicator
• Shaking Tray for 25ml, 50ml, 100ml, 250ml, 500ml, & 25mm dia Test tubes or conical flasks

Thermostatically controlled Incubators. Double walled with cups and sleeves for glass tubes. Drying chamber is provided at the bottom of the apparatus below the cups and tube. Cups are supplied with nickel plated polished handle. Temperature up to 90°C with Accuracy of +0.5°C to +1°C. The bath is B.T.L Type (without glass tubes)

Sizes: 

• 4 Cups and 6 Sleeves
• 6 Cups and 8 Sleeves
• 12 Cups and 14 Sleeves

Electrically operated for getting pyrogen-free distilled water automatically. Wall hanging space saving arrangement is provided. The Body & condenser is seamless. Fitted with automatic ejection device which operates automatically when water vessel gets dried.

Output Capacity (Approx.):

• Output approx. 2/3 liters per hour
• Output approx. 3/4 liters per hour
• Output approx. 5/6 liters per hour

Temperature range 5°c above ambient  to 100°C Temperature controlled by Digital Electronic Controller cum Indicator with a sensitivity of ±0.1° C. Suitable for all laboratory applications requiring constant temperature with high degree accuracy. Double walled inside stainless steel and outside mild steel sheet. A glass window is fixed on the front. Complete with stirrer, with speed regulator, operates on 220/230 volts A. C.

Inside Chamber Size in mm(L x W x D)

• 425 x 250 x 225
• 425 x 375 x 375
• 650 x 450 x 450

Optional Accessories:

• Digital Temp. Indicator-cum-Controller instead of constant thermometer

• Microprocessor PID digital temp. Indicator-cum-Controller instead of constant thermometer

D.C. motor special system shaker to work on 220 volt a.c. for variable and smooth function speed control by speed regulator.
It is general-purpose machine and found very useful for mixing or agitation ingredients, solution in flasks, bottles, beakers and Kahn racks etc. Upper tray covered with rubber floor and sides of the tray are slotted to take parallel and cross bars cover with rubber to hold flasks, bottles beakers, Kahn racks etc. The bars are tightened with washers and fly nuts can be adjusted as per the requirement. Cycles single phase.

The machine can accommodate Kahn racks, bottles or flasks of different sizes by adjusting the compartments with the help of rods supplied with the machine. Fitted with ¼ HP motor and having mechanical adjustments for adjusting the motion.

Number of oscillations fixed at 280 ± 5 oscillations per minute. Supplied complete with top platform rods, ON/OFF switch, plug and cord.

Holding Capacity: 

• To hold 4 flasks Cap. 100 ml. to 1000 ml. by side clamps
• To hold 8 flasks Cap. 100 ml. to 1000 ml. by side clamps
• To hold 12 flasks Cap. 100 ml. to 1000 ml. by side clamps

Optional Accessories:

• Digital Timer 0-60 minutes.

Kahn racks, bottles or flasks of different sizes can be shaken by adjusting the compartments provided on the shaking rack. The rate of motion can be adjusted mechanically by belt tension from 140 to 250 rpm approximately. Supplied complete with top platform rods, on/off switch, plug and cord. To work on 200/220 volts, single phase, 50 hz, ac supply.

Optional Accessories:

Light weight with ceramic fiber wool insulation (instead of brick insulation). The outer casing is made of double walled thick M.S. Sheet, duly painted. Heating elements are made of kanthal “a-1” wire and backed by high temperature carpool insulation, which avoids loss of energy. Temperature control unit consists of energy regulator, fitted in front of furnace with two pilot lamps. The apparatus is complete with one pyrometer, thermocouple, silver thermal fuse, main lead with power plug. 

Sizes (W x H x D):

• 100 x 100 x 225 mm 
• 125 x 125 x 250 mm
• 125 x 125 x 300 mm 
• 150 x 150 x 300 mm 
• 200 x 200 x 300 mm 
• 125 x 175 x 350 mm 
• 125 x 175 x 375 mm
• 225 x 225 x 350 mm 

Optional Accessories:

• Digital Temperature Indicator-cum-controller.
• PID Digital Temperature Indicator-cum-Controller.

Additional Information:

• Production Capacity: 10
• Delivery Time: 10 days

The outer chamber is made up of M.S. Sheet duly painted and inner chamber of thick S.S. Sheet. The gap between the walls is filled high grade mineral glass wool, which ensures maximum thermal efficiency in our incubator shakers. The unit is provided with two doors, the inner door is made of thick plexi glass/float glass, to view the specimens without disturbing the temperature of the chamber. This door is provided with magnetic door closer. The outer door is made of mild steel sheet lined with stainless steel from inside. This door is provided with lock and key arrangement. The unit is mounted on a sturdy steel frame and provided with castor wheels for easy movement inside the laboratory. The unit is provided with two/three stainless steel shelves. The triple walled back of our incubator shakers are provided with two air circulation fans for uniform maintenance of the temperature throughout the chamber. The standard model of our orbital shaker has a plat form size of 500mm x 500mm and it is an withhold 16-20 flasks of 250ml or 500 ml.  However this can be modified to suit the individual customer’s requirements. The efficient and diligent shaking system of our incubator shaker has an orbital shaking movement which is powered by a reliable Crompton greaves motor of suitable power and wattage. The shaking speed of our standard model variable speed incubator shaker is between 80 RPM to 400 RPM. However we can customize the speeds as per the individual requirements of the user. 

Optional Accessories:

• Timer 0 - 24 Hours

• Digital Temp. Indicator-cum-Controller

• Microprocessor PID digital temp. Indicator-cum-Controller

• Automatic Voltage Stabilizer 3KVA (Recommended must)

This instrument can be used for measuring on oils, fats and waxes giving a reading directly in terms of the oil scale, otherwise known as Butyro Refractometer. The micrometer eye piece allows an accuracy on their scale of 0.1. This allows us measuring on materials with index of refraction in the range 1.42 to 1.49 to an accuracy of 0.0002.

Double walled, Oute Body made of Mild steel duly enamel painted and working chamber made of Cylindrical shaper Heavy gauge of Stainless Steel. A glass Window made of Toughened glass for viewing without opening the Door. Temperature is controlled by sensitive thermostat / digital temperature controller cum indicator from room temperature 50 C TO 150 C . Front pannel fitted with Vacuum Gauge, Vacuum Valves Indicator Lamp 220 Volts A.C supplied with removable shelve.

INSIDE CHAMBER ROUND SHAPE) DIA x DEPTH

(a) 200 mm x 200 mm
(b) 250 mm x 250 mm
(c) 250 mm x 300 mm
(d) 300 mm x 300 mm
(e) 300 mm x 300 mm

POLARIMETER ( RESEARCH MODEL)

RESEARCH MODEL

The unit having highly accurate glass scale in divided to read angular and also carries sugar in I.S.S. UNIT SCALE FROM 0 360 C . Suger Scale from 30 degree to 120 degree. Complete unit supplied with 220 mm Polarimeter Tube, Sodium lamp.

Additional Information:

• Delivery Time: 7 Days

This range of centrifuges is of robust construction.The table top models provided with step less speed regulator and transparent acrylic lid are suitable for accommodating different types and capacities of rotor heads. Fitted with Analogue Speed Indicator, 0 to 99 Minutes Pre-Set Timer, Illuminated Switch and Digital R.P.M. Meter. (R.P.M. 0 to 4200)

Useful for stirring centrifugal tubes, test tubes or small flasks. Fitted with a Neoprene rubber cup mounted eccentrically on the shaft against which at its is held the tube with its lower end pressing against the cup. Mixing action is controlled by varying the angle and pressure of the tube against the cup. Fitted with speed control arrangement. 

Laboratory Oven:

• Inner chamber available in Aluminum or Stainless Steel
• Three side heating elements provided

Optional Accessories:

• Air Circulating Fan
• Timer 0-24 hours
• Digital temp. Indicator-Cum-Controller
• Microprocessor PID Digital Temp. Indicator-Cum-Controller
• Digital Temp. Indicator

We are engaged in offering Doctor Type Centrifuge Machine to our clients. Our range of all products is widely appreciated by our clients.

Additional Information:

• Delivery Time: 4 Days