Linco Scientific Instrument & Chemicals Pvt. Ltd.

Double wall construction . Inner chamber made of stainless steel sheet. Supplied with removable perforted SS Tankki . Exterior made out of thick Stainless steel sheet. Outer double wall door is provided gasket and Goli Lock .control panel is provide with various indicators, on-off switch. Temperature control By Thermostat. Supplied with cord and plug etc. To work on 220VAC Hz single phase.

MICROSIL Portable Leaf Area Meter Model: MIC-LAM8 

Measurement function: it can measure the blade length, width, aspect ratio, perimeter, area, shape factor, shape factor, ambient temperature, etc.

Bluetooth App functions: transfer data, upgrade hardware programs, and return longitude and latitude to the instrument.

Data viewing: historical data and blade shape in the equipment memory can be browsed.

Time function: the equipment has time and date functions, which can save the measurement time with the measurement data.

Technical Parameter:-

·        Operation humidity        :  0%～100 %RH（Frost free）

·        Working Temperature   :  0～40℃

·        LCD                                    :  480*854 RGB interface display

·        Battery                              :  5AH, rechargeable lithium-lion battery, 16h end urance

·        Max scan length              :  3000 mm

·        Max effective scanning width:  210 mm

·        Scanning speed                :  150mm/s

1. Three Stages of Quality Checking before Dispatch.

2. Measuring range: ±45°(optical rotation) ±120º Z (sugar).

3. Measuring Mode: Optical Rotation, Speci???c Rotation, Sugar Concentration.

4. Automatic Repetition - Measurement for 6 times, and Calculation of Average Value.

5. Choice of 3 Pin Power Cord / Dust Cover Supplied.

6. Online Installation/ Demonstration Provide Free of Cost.

7. Demonstration / Installation Video CD are Provide at Free of Cost.

Seed Blower – Dakota Type

MICROSIL SEED BLOWER (DAKOTA TYPE) Seed Blower utilizing accurately controlled air flow through the air column by calibrated valve cap on the top of the column. With provision for automatic timer cut off for operation and shall have 3 column size to accommodate various sizes for agricultural and vegetable seeds. The equipment is complete with all standard features including suitable meter for operation on 220-230 volts, single phase, 50 Hz, AC supply.

Features:

Light weight

Less power consumption

Long lasting service           

 Three sizes of air column are:

(a) 1.1  I.D. x 23   H approx

(b) 2.3 I.D. x 34 1/4  H  approx

(c) 3.4 I.D. 35  H approx

Manual Operated Compression Testing Machine (CTM), 1000 KN (100 ton),
Channel Type Model: fitted with double plunger pump with hydraulic Load gauge 0-1000 KN capacity.

Vertex providing an extensive series of Compression Testing Machine Hand Operated Channel Type with Polyhydron Pump Feed & Power Hand Pump Model: HP5012**D / HP5016**D, which are available in varied specifications that meet on the clients demand.

The Compression Testing Machine is quite a common testing methodology that is used for the establishment of the compressive force or the crushed resistance of the material. The compression test measures the behavior of the material under the influence of load. The maximum level of stress that a material is capable of sustaining over a period of time under the load is calculated.

Technical Specification:-

• Especially designed for lab use.
• Suitability for all cereal grains, pulses, oilseeds etc.
• Adjustable feed rate & blower air flow
• Fractions Separation.
• Two screen system.
• Different fractions & impurities are collected from different spouts.

•  RQ - 140 / D - FP is available with flame proof motor & frequency inverter inside flameproof enclosure.These stirrers have steady & constant speed for viscosity during mixing. They have built in digital RPM indicator for process valodation and reproducibility.

• Timer 1 to 99 minutes
• Temprature 20 to 80°c 
• With Led Digital display for timer and temprature
• Turbo power normal and soft fuction to resolve the cleaning blind spot
• Degas and memory function
• Automatically ultrasonic frequency tracking
• POS stainless stell tank and basket 
• Stamping Tank without without welding gap for better water proof
• Powerful ultra sonic transducer for efficiency and cleaning effect
• Ceramic heaters for better heating effect
• Special cooling sysem, components work more steady
• Moisture proofed and anti corrosion PCB capable for different working Enviroments.
• Ultrasonic Frequency 40KHz.
• Capacity- 15 , 20 , 30 Liters. 

Compliance with Following Standards:

IS : 1195-2002/BS 6925-1988

Purpose:

Hardness tester for Mastic Asphalt has been fabricated to meet the essential requirements of IS 1195 – 2002 in finding out the Hardness Number of mastic asphalt.

Definition of Hardness Number:

Hardness Number is defined as the figure denoting the depth in hundreds of a centimeter, to which a flat ended indentation pin in the form of a steel rod 6.35 mm in diameter will penetrate the mastic under a load of 31.7 kg applied for 60 seconds, the temperature being maintained at 35′ ± 0.5°C or 45°C ± 0.5°C. The unit is complete with load release mechanism.

Construction Details:

The apparatus consist of a frame supported by means of four leveling screws. On the bottom of the top plate, a lever with a counter balance weight and a load hanger is fixed. The ratio of the lever is such that when the weight is kept on the hanger, the ultimate load acting on the penetration pin is 31.7 kg. A thermometer is fixed by clip, which records the temperature of the water in the container.

The load transfer bar passes through the support bracket and rest on the specimen. The penetration rod can be adjusted and locked before the test is conducted. An adjustable ring is Provided on the load transfer bar and rest point for the dial gauge of 0.01mm accuracy to record the depth of penetration. The ring can be adjusted and locked in position for the initial setting of the dial gauge. A cam which is operated by the handle is provided to lock or free the load transfer bar. A load support rod and a bracket are provided to support the load while the adjustments are being made before the test is standard.

Supplied With Digital waterbath and stop watch

• Op onal vessel quan ty, up to 12 vessels to meet diferent diges on requirements.
• Ver cal design for even distribu on of microwave.
• Real- me monitoring for both temperature and pressure of each vessel.
• Contactless sensor monitoring saves consumables cost and maintenance cost.
• Imported vessel material for both sample vessel and protec on vessel highly ensures safety. 7 inch color Touch screen with user-friendly interface for easy opera on. CFRP outer shell material with high strength ensures impact resistance.
• Pre-installed general standard methods, users can also create, save, modify and delete the method.
• 316L Stainless Steel tank with mul layer Teflon coa ng avoids acid corrosion, also improved cooling efciency.

The Vibrating Table Proper compaction of cement concrete while casting specimens for compression testing is essential to achieve higher compressive strength. Vertex Vibrating Table is ideally suited for this purpose.

The table top is suitable to hold cube moulds and has stops along its edges to prevent moulds from sliding off the table during operation. The specially designed vi bro motor for operating the vibrator.

Table top size : 750 x 750 mm 1000 x 1000 mm also available at an extra cost. Both models operates on 440 volts, A.C. Three Phase

Models available:

• Vibrating Table,Table top 75cm x 75cm for 6 moulds of 150mm cube
• Vibrating Table,Table top 50 x 50cm for 4 moulds of 150mm cube
• Vibrating Table,Table top 2m x 1m for 32 moulds of 150mm cube
• Vibrating Table,Table top 1m x 1m for 16 moulds of 150mm cube

• Make : Microsil
• Material : Plastic , Glass , Steel
• Leakproof upto : 10kg/cm.sq
• Specimen Diameter : 38mm
• Confining Pressure : 0-600kPa
• Sear Speed : 0.0016x4mm/min
• Sheath stretcher : 38mm dia
• Thickness : 6 mm
• Tube Material : Plastic
• Minimum Order Quantity : 01 Piece

• Model Number :  MC3057
• Standard : IS 2720 (Part X

Features:

• Reliable
• Longevity
• Durable
• Robust

• Dimensions: 700 x 850 x 300 mm
• Weight (approx.) 40 kg
• Shape : Square 
• Operation On : Hand
• Brand : Micropsil
• Surface Finish : Painte

The VSLIC-B122 comprises a robust and compact two column frame with adjustable upper cross beam.

The unit is a bench mounted compression frame with motor and worm gear housed within the base unit.

The mechanical jack raises the lower platen at a constant speed of 50.8 mm/min as required in the relevant standard. For safety, the up and down travel of the lower platen movement is limited by limit switches.

Rapid adjustment of the platen is also provided using the control buttons on the front panel of the machine.

The measuring system consists of a 50 kN capacity load ring, digital flow meter (dial gauge) fitted to the breaking head.

The Marshall Stability Machine is also suitable for testing 4” dia. specimens (100 mm) conforming to ASTM D5581.

The machine can be hand operated by a lateral hand wheel for calibration purposes; the hand wheel is supplied complete with the machine.

Breaking head/s and/or indirect tensile strength test jig/s should be ordered separately.

The MIC-B122 Marshall Stability Test Machine is supplied complete with;

• Load Ring, 50 kN
• Penetration Piston for Marshall Stability Test
• Digital Dial Gauge 25×0.01 mm with Holder 
• Hand Wheel for Manual Control

^{Used for determining the workability of building lime.}

^{It comprises :}

• ^{One 300 mm dia polished steel table with three engraved circles of 70 mm, 110 mm and 190 mm dia at the top face.}
• ^{A frame having a horizontal shaft carrying a cam on one side and a wheel on the other, adjusted to raise the table by 12.5 mm and allow it to fall freely.}

Standard - IS 1199-1959, ASTM C-124, AASHTO-T-120.

Model - MIC-C108

Origin - Indian

Make - Microsil

Warrenty - 12 Month

Laboratory Vane Shear Apparatus Consist of a special motor, adjustable in height by means of a lead screw rotated by a drive wheel to enable the vane to be lowered into the specimen.

Rotation of the vane is by means of an electronic motor turns the upper end of a calibrated torsion spring to give a rotation of 0.1 degree/sec.

The vane shaft is attached through the hollow upper shaft to resettable pointer which indicates the angle of torque on a dial graduated in degrees. The die reading multiplied by spring factor gives torque.