Linco Scientific Instrument & Chemicals Pvt. Ltd.

• Portable instrument for calibrating process devices and measuring process signals
• The instruments powers or measures a two wire current loop

• Precision current source
• Measurement of a current signal
• Power and Measurement of two wire loop
• Precision DC mV source

The experiment consists of the following :

(i) Four Probe Arrangement

(ii) Oven (upto 200ºC)

(iii) Sample : Ge Crystal mounted

(iv) Thermometer (0-200ºC)

(v)Four Probe Setup

(a) Constant Current power supply digital Accuracy : +0.25% of the reading +1 digit Load Regulation : 0.03% for no load to full load

(b)Electronic Millivoltmeter 200 mV Accuracy : + 0.1% of reading = 1 digit Impedence : 1 Mohm

Display : 3½ digit, 7 segment LED (12.5mm) height with auto polarity and decimal indication.

A 2 milliwatt Laser, Mountable on optical bench, with in built power supply workable on 220V AC. 50Hz. Design for continues working, Highly rugged mechanical setup. Up-Down motion for beam.

1. It is a 20 MHz Dual Channel Oscilloscope that s ideal for, professionals as well as students undergoing technical studies. It is a rugged, light weight instrument that features a brijght, sharply defined trace on a 80 by 100 mm cathode ray tube. The internal trigger signal is ac coupled. An external triggering signal or an external Z-axis modulation signal can be applied via a front panel or rear panel connector and the source selector switch. The horizontal system provides calibration sweep speeds from 0.2s to 0.1 Micro S per division. For greater measurement accuracy a x5 magnifier circuit extends the maximum sweep speed to 20 ns per division. Special Features : Synchronisation of the signals from the two channels can be identified by a Red LED, marked as "READY", present on the right hand side top on the front panel.

Additional Information:

• Delivery Time: 7-10 days
• Packaging Details: good

Additional Information:

• Packaging Details: good

The Four stroke petrol engine with CNG setup will be prepared by using good working condition multi cylinder car engine with all the fittings of the engine along with radiator, silencer, air filter, starter, battery, alternator, indication meters, fuel tank, CNG tank, electrical wiring with ignition switch etc., all mounted on to a sturdy iron frame with caster wheels (mobile trolley).

 All the fittings such as meter, fuel tank, radiator etc., along with the engine will be arrange on to the paint finished trolley with its original fittings such as rubber dampers and clamps so as to contain the vibrations. The wiring for the sensors, indication meters etc, will be done so that by cranking the ignition the engine will start working, the indications such as alternator charging, oil pressure, temperature etc., will be displayed on to the necessary indication meter attached.  The engine assembly will be serviced ,painted with a single colour paint.

MPFI engines will be fitted with  all necessary sensors, injectors  and other MPFI accessories, ECU etc., which will be duly connected by its original wiring harness and will be made to  work along with necessary indications.

a. Ambassodor Isuzu MPFI Engine With CNG setup                        

b. Maruthi 800 CC/Omni MPFI Engine With CNG setup                 

c.  Santro MPFI Engine With CNG setup                                              

d. Maruthi OMNI/800 CC carburator Engine With CNG setup                

e.  Maruthi Zen/Alto/Esteem MPFI  Engine With CNG setup                  

The glass distillation process is a method of separation for laboratory and research purposes where two or more liquids with a mixture of the compound have different boiling points. This method also does not allow cross-contamination while dealing with any volatile, corrosive, or reactive compounds as glass does not react.

The component of a distillation flask is kept in a receiving flask before it vaporizes only at certain temperatures while in a distillation flask, other components of the substance are in a mixture. When the vapor cools down, it turns into a liquid which is collected in a receiving flask. The more crucial components for a glass distillation procedure include a thermometer, cooling condenser, and a flask used for distillationase in all these components.

• For accurate work, Physics Resistance Box in polished wooden box and panel figured in wh
• Split brass contact blocks hold precision cut, interchangeable plug having moulded black fluted tops.
• Coils of constantan wire, double silk covered are wond co-efficient. Accuracy ±0.1%

We are presenting excellent quality assortment of Resistance Box