Madhur Construction Chemical

• Repair of concrete
• As an Admixture for cementitious systems
• It improves durability water proofing and abrasion resistance properties of mortars
• It can be use as waterproofing bonding agent for Brick slips copings and risers
• Swimming pools basement potable water tanks sludge tanks & ducts tunnel and underpasses
• In chemical plant where high water spillage are there

• Crack Resistance
• Abrasion Resistance
• Good Workability
• flexible
• Chemical Resistance
• High Strength

• Easy to use
• Prevents bleeding
• Excellent Adhesion
• Corrosion Protection
• Good Resistance to salt permeation
• Compatible with all types of cements
• Reduce Cement water ratio
• Enhance the flexible and tensile strength of the mortar and render
• Improve chemical and abrasion resistance
• It reduce Shrinkage

• 3 Days 10.6
• Week 12.8
• Month 21

• Approximately 4-5 m 2/ liter depending on substrate porosity

• It has a shelf life of 12 months if kept in an unopened condition

Additional Information:

• Production Capacity: 100 mt
• Delivery Time: imidate
• Packaging Details: 1,5,20,50,200 kg packing

• Excellent waterproofing
• Processed in excellent manner
• Impurity free

• Appearance / Colour: White (milky) liquid

• Storage Conditions / Shelf Life : 12 months from date of production if stored in undamaged and unopened, original sealed packaging, in dry conditions and protected from direct sunlight. Protect from frost.

• Chemical Base: Styrene butadiene rubber emulsion.

• Increases flexural and tensile strength
• Compressive strength is comparable with concrete.
• Reduced shrinkage, water permeability.
• Good bonding between old & new concrete.
• High strength mortar with good resilience
• Durable structural repairs, restoration & waterproofing Improved abrasion resistant flooring.

• Simple to use as it is a single component.
• Cures to a hard, tough & wear resistant surface. Bonds (adheres) strongly to the most surface types.
• Can be applied to an uniform thickness coating on horizontal and vertical surfaces.
• Allows trapped water (vapours) to escape and prevents blistering and adhesion failures.
• Makes cement mortar or coating compact which prevents salt penetration into the concrete.
• It acts as anti-corrosive for steel. SBR is highly durable even in continuous contact with water.
• It is resistant to water, dilute acids and alkali solutions.
• It is non-flammable & non-hazardous. Does not evolve toxic gases when exposed to fire
• Non-toxic to human being.
• Most properties improves on ageing
• Resistant to fungus and micro-organism growth.

• Waterproofing of building, toilets sunken portion basement.
• Waterproofing of water tanks and swimming pools.
• Repairing of concrete and masonry walls-internal, external & terrace roofs by cement mortars.
• Renovation and protection of concrete against corrosion and salt petre.
• As a bonding agent for old concrete to new concrete, industrial floor or floor duct nosing repair

• SBR LATEX is first separately diluted with water by adding water to SBR-Latex. The diluted SBR-Latex is then added into the mixture & homogenised.

• Repair of concrete
• As an Admixture for cementitious systems
• It improves durability water proofing and abrasion resistance properties of mortars
• It can be use as waterproofing bonding agent for Brick slips copings and risers
• Swimming pools basement potable water tanks sludge tanks & ducts tunnel and underpasses
• In chemical plant where high water spillage are there

Uses

• Crack Resistance
• Abrasion Resistance
• Good Workability
• flexible
• Chemical Resistance
• High Strength

Characteristics

• Easy to use
• Prevents bleeding
• Excellent Adhesion
• Corrosion Protection
• Good Resistance to salt permeation
• Compatible with all types of cements
• Reduce Cement water ratio
• Enhance the flexible and tensile strength of the mortar and render
• Improve chemical and abrasion resistance
• It reduce Shrinkage

Compressive StrengthN/mm 2

• 3 Days 10.6
• Week 12.8
• Month 21

Coverage

• Approximately 4-5 m 2/ liter depending on substrate porosity

Our range of Grouting Compound is precisely composite and developed. They are impeccable finished and requires low maintenance. This range of Grouting Compound is highly demanded in the market because of their salient attributes. We always pay attention towards maintaining the standard of our products range. This product is made at highly developed production unit by the use of superior quality of materials.They have been priced at very reasonable rates in the market.We have always given extra fine finishing to our final product range.

Features

• Reasonable price
• Quality product
• Fine finish

We offer our clients superior quality of Grout Applicator. These are appreciated for their effectiveness and durability features. Epoxy grouting can also be referred as moisture intensive grout that is used for filling cavities and cracks like column, beam, bridges, concrete structures, etc.

In this service we provide the following:

• Fix the nipple in concrete or masonry wall
• Apply epoxy or polymer grouting on wall or bim & column
• Area of application: - bim, column, tank, wall

Madhur Water Repellent Additive admixture system is made up of three individually formulated, polymeric additives.

Specification:

• Madhur -208 is a liquid water-repellent and efflorescence control admixture that is specially formulated for use in the manufacture of concrete masonry units (CMUs) as well as other "dry cast" concrete products. Madhur water-repellent admixture is integrally mixed into CMUs during manufacturing at the block plant.
• Madhur -209 Mortar Admixture is a liquid water-repellent admixture for masonry mortar. It is integrally mixed into masonry mortar at the job site prior to concrete masonry wall construction.
• Madhur -210 is a highly efficient powdered water-repellent admixture for use in producing integral water-repellent masonry mortar.

• Optimizes overall water-repellent properties
• Maintains excellent wind-driven rain resistance
• Provides lasting protection from moisture damage without the use of exterior post-applied sealers
• Enhances color intensity and uniformity
• Reduces the potential for efflorescence
• Improves the texture and consistency of manufactured concrete products
• Increases the coverage rate of post-applied paints and coatings