Magic Zone International Private Limited

• Dalmia Magic Premium Skim Coat Fibrothick is a versatile polymerised cement based micro-texture with natural fibre and unique natural tone, surface finish solution and wall thickness builder that is suitable for AAC block and RCC surfaces. It can be applied both internally and externally on both vertical wall surfaces and horizontal ceiling surfaces. It replaces the conventional method of plastering and requires only water to be added on site before application.
• It can be built up to 6-12 mm thicknesses without cracks and can be finished to a matt or glossy finish. Dalmia Magic Premium Skim Coat Fibrothick has been tested at Singapore Housing Board’s accredited laboratory in Singapore and conforms to the Singapore HDB specs and also the European Standards BS: EN 998-1.

• Emulates natural tone like light pink colour.
• Decreases 51% Dead Load 
• Prevents hair crack caused by material shrinkage.
• Suitable for AAC Block and RCC surfaces.
• Water resistant
• Excellent workability.
• Self-curing due to high water retentive property.
• Reduces use of paint on surface.
• Resists growth of algae and fungus..

• The surface should be made clean and free from curing compound, dust,  dirt and other impurities such as oil, grease, salts, application of other Acrylic/PU/Oilpaint, etc using suitable sandpaper, blade, wire brush and clean water. There should not be any mildew or algae on the surface. Voids and cracks on the surface should be repaired prior to the cleaning of the surface. 
• Absorbent substrates must be pre-wetted to saturated surface dry (SSD) conditions. For new masonry plaster surfaces, 28 days of curing is recommended before application.

• Allow the first coat to dry for minimum 4-5 Hour in hot condition and 8-10 Hour in cold/winter condition
• Apply the second coat and allow it to dry. After drying the second coat, remove any type of marks with the help of moist sponge and rub surface very gently with the help of blades.
• Although it is not essential to rub the surface done while using Dalmia Magic Premium Skim Coat Fibrothick, however it is important to remove unevenness before applying any kind of paints or coatings using emery paper (size should not exceed 400 micron)
• Thickness building: The versatility of the Dalmia Magic Premium Skim Coat FIBROTHICK allows the maximum thickness per coat should be 6 mm, be allowed to dry before applying the second, third coat etc. to build up the thickness.

• India's first fibre reinfoced plaster for AAC walls
• Replaces plaster & putty
• Saves time-saves labour cost
• Both for internal & surfaces
• No gypsum, No sand
• Lightweight plaster for lightweight AAC block
• Wall thickness builder
• 75% lightweight than traditinal cement sand plaster
• Construction industry devlopment council, Certified vendor

With the support of our team of experts, we are engaged in providing wide range of ACC Ready Mix Plaster.