Usage/Application	PCB Repair,Component Testing,VI Graph
Model Name/Number	FADOS7F1
Type Of Circuit	Parallel Circuit
Frequency	50 Hz
Voltage	10 V
Country of Origin	Made in India
Number of Channels	2 Channels
Scan Modes	Manual or Automatic. Automatic selection steps of voltage, current, frequency

FADOS multifunction circuit board testers have been specially developed to dermine and troubleshoot faults at all type electronic circuit boards. They are basically computer based VI testers. The Fados 7F1 which stands for FAult Detector and OScilloscope 7 Functions in 1 .

FADOS 7F1 can be used for determining faults of all types of PCBs present in Electronic devices used in medical, textile industries, Electronic Appliances and other large automated devices used in the Automobile Industry as well. It can also be used as a component tester for IC, transistor, FET, IGBT, resistor, capacitor, indicator.FADOS7F1 is a double-channel VI tester. While using TEST feature, a comparison can be conducted without giving energy to the card; while using OSCILLOSCOPE feature, energy is given to card and signals are controlled.

Usage/Application	Industrial
Country of Origin	Made in India
Test Voltage	12 kV DC
Test Current	100 mA DC
Pulse ratio for Pin-pointing	1:3 second and 1:6 second selectable
Fault Distance Calculator LCD Display	16x2 characters with back light
Power Supply	230V AC, 50 Hz, Single phase
Receiver	Sheath Fault Locator EFL 1

Application :-

Use to Conditioning / DC Test / Burn, Pre-locate and Pin-point sheath faults in underground extra high voltage power cable transmission networks.

Key Features

Test Voltages 0 - 3, 0 - 6 & 0 - 12 kV DC continuously variable.
Test Current 3 kV - 400 mA, 6 kV - 200 mA, 12 kV - 100 mADC.
Pulse ratio for Pin-pointing 1:3 second and 1:6 second selectable, ON OFF time ratio.
Fault distance Calculator LCD display-16x2 characters withback light.
Cable sheath fault pin pointing by pool of potential method.
Burn mode for conditioning the sheath fault.
Power Supply 230V AC + 10%, 50 Hz, Single phase.
Receiver - Sheath Fault Locator EFL

Standard Accessories:

HV Cable 6sq mm single core screen cable 5 meter length
Mains supply cord 3 meter length.
Yellow / Green 10 sq mm earthing cable 5 meter length
Sheath Fault Locator EFL 1 - 1No.
Earth Spikes - 2Nos
Standard Warranty: One Year

Usage/Application	Industrial
Country of Origin	Made in India
Product	Trolley Mounted HT Cable Fault Locating System HICOMP
Output Voltage	16 kV
Energy	500 Joules
Pre-Location Of Cable Faults Range	100 km
Power Supply	230V AC , 50Hz single phase

Trolley Mounted HT Cable Fault Locating System HICOMP

Application :-

The cable fault locating system HICOMP is used to pre-location offault distance with the help of pre-locator and pin-point cablefault using surge tester in acoustic method with the help of surgewave receiver in low voltage power cable network


Standard Accessories:

HV Output Cable 10 sqmm single core screen 15 meter length with heavyduty clamp. Mains supply cable 6 sq. mm 15meter length.
Yellow / Green 10 sq mm earthingcable 15 meter length BNC to crocodile for TDR measurements 15 meter length

Standard Warranty: One Year

Model Name/Number	TFL 8
Usage/Application	Industrial
Country of Origin	Made in India
Maximum Measuring Range	Up to 100 km
Display	Big 7" color LED screen with Touchscreen operation
Power Source	Battery Operated

Application :

It is used for pre-location of short circuit, open circuit fault distancein Low Voltage Impulse method and low insulation / high resistance/ flashing fault in Impulse Current method ICM with the help of suitable surge tester by power transmission, distribution network companies and cable fault location service providers.

Standard Accessories:

Low voltage Impulse (TDR) testing cable Impulse current method (ICM)testing cable
Re-chargeable battery charger /Adapter
Software CD Carrying case Instruction /
UserManual

Standard Warranty: One Year

Usage/Application	PCB Repair, Component Testing, VI Graph
Model Name/Number	FEDOS9F1
Frequency	50 Hz
Voltage	10 V
Country of Origin	Made in India
Type Of Circuit	Parallel Circuit

FADOS9F1 Fault Detector & Oscilloscope 9 Functions in 1 have been especiallydeveloped to determine and troubleshooting faults at all type electronic circuit boards. FADOS9F1 is basically computer-based VI testerVoltage-Current (Signature Analysis) equipment.

FADOS9F1 includes 9 important functions
1. Double - Channel Fault Detection (Analog Signature Analysis - VI Graph) Comparing good and faulty or suspect circuit boards without giving power to boards.
2. DC Power Supply Output with Adjustable Voltage and Current For giving energy to circuit boards and creating Power DC Voltage-Current Graph.
3. Non Touched IR Temperature Sensor For detecting more heated components and draw out heat map of circuit board.
4. Equivalent Circuit Diagram Composing R, C, or Diode Circuit Diagram according to the point touched.
5. Measuring Value of Resistors, Capacitors, and Diodes Feature of measuring the value of touched point.
6. Fault Detection by Comparison from Memory By recording data of good circuit boards to memory, comparing faulty or suspects boards from memory.
7. Double - Channel Digital Oscilloscope As occasion may require, device can be used as oscilloscope.
8. Square Wave Signal Output Ch.1 is used as oscilloscope and Ch.2 is used as signal generator.
9. Analogue Voltage Output Ch.1 is used as oscilloscope and Ch.2 gives analog voltage output.

Usage/Application	Industrial
Voltage	230V AC
Phase	Single phase
Country of Origin	Made in India
Output Voltage	40 kV DC
Output Current	20mA
Duty Cycle	5 min ON / 10 min OFF
Frequency	50 Hz

High voltage DC test set is used to check Di-electric strength of Cable, Transformers, Switchgear & Relays, Motors, Coils & Chokes, Generators, Capacitors, Wires & Cables, and other Electrical apparatus manufacturers or in power transmission and distribution network.

Fully protected operation with safety interlocks.
Easy to perform DC highvoltage test. Comprehensive safety operation. Continuously adjustableoutput voltage from 0 to 100%.
Output over current tripping facility.
Full current delivering capacity on load. Emergency off switching facility incase of any emergency.
Selectable current ranges for precise leakagecurrent readings.
Built in auto discharge in case of mains power failure orequipment switch off.
Timer provision to switch off the equipmentautomatically after the preset time setting.
Pre-location cable faults indecay or voltage transient mode with conjunction suitable pre-locator.
Rugged construction and easy to carry on site 

Standard Warranty: One Year

Standard Accessories :

HV Output Cable 10 sq mmsingle core screen cable 5 meter length with heavyduty clamp. Mains supply cord 3 meter length.
Yellow / Green 10 sq mm earthing cable 5 meter length

Surge Wave Receiver