Mark Compressors (A Division of Atlas Copco India Limited)

Brand	Mark Compressors
Weight	4.2 kg
Nominal Capacity	8400 I/min, (504 m3/h)
Maximum Pressure	16 bar
Connection	1 1/2 Inch
Dimensions	140 x 34 x 449 mm
Free Space For Cartridge Replacement	100 mm

Available in C and V series

Allowing unclean or contaminated compressed air to enter your air network holds several risks. In almost all applications, this can cause a considerable decrease in performance, as well as an increase in maintenance, costs both related to actual repairs as well as a loss in productivity. Mark's innovative filter is engineered to cost-effectively provide the best quality and meet today's ever-increasing quality demands. They are fully developed and according to ISO standards.

Double o-rings guarantee proper sealing to reduce leakage risks and increase energy savings.

Increased user-friendliness and reliability via push-on element.

Protection paper avoids direct contact between filter media and stainless steel filter core.

Enhanced glass fiber media ensure high filter efficiency, low-pressure drop, and guaranteed lifetime performance. For oil coalescence filters, multiple layers are wrapped around each other to avoid the risk of early oil breakthrough.

Enhanced high-performance stainless steel filter cores ensure ultimate strength and low risk of implosion.

Oil coalescence filters: Double drainage layer (outer protection paper and foam) has a large drainage capacity which is ideal for variable speed compressors. Moreover, the poly-urethane foam avoids oil re-entrainment.

Dust filters: open foam acts as a pre-filter for the largest dust particles, which prolongs the filter lifetime.

Epoxy sealed caps for reliable filtration.

Internal ribs support the element and facilitate the route of oil droplets.

C Filter Range - High-efficiency coalescing filters, removing solid particles, liquid water an oil aerosol. Total mass efficiency: 99.9% for optimum filtration, a C filter should be preceded by a G filter at all times.

G Filter Range - Coalescing filters for general purpose protection, removing solid particles, liquid water, and oil aerosol. Total mass efficiency:99% for optimum filtration, a G filter should be preceded by a water separator.

V Filter Range - Activated carbon filter for removal of oil vapour a hydrocarbon odors with a maximum remaining oil content of 0.003 mg/m3 (0.003 ppm). 1000 hour lifetime.

The quality of air required throughout a typical compressed air system varies. Offering an extensive filter range, a mark can always match your precise requirements, ensuring that all types of contamination are avoided and costs are reduced to an absolute minimum.

Brand	Mark Compressors
Weight	1kg
Max Pressure	16 bar
Nominal Capacity	720 I/min (43 m3/h)
Connection	3/8 Inch
Dimensions	90 x 21 x 228 mm
Free Space For Cartridge Replacement	75 mm

Available In C and V series also.

Allowing unclean or contaminated compressed air to enter your air network holds several risks. In almost all applications, this can cause a considerable decrease in performance, as well as an increase in maintenance, costs both related to actual repairs as well as a loss in productivity. Mark's innovative filter is engineered to cost-effectively provide the best quality and meet today's ever-increasing quality demands. They are fully developed and according to ISO standards.

Double o-rings guarantee proper sealing to reduce leakage risks and increase energy savings.

Increased user-friendliness and reliability via push-on element.

Protection paper avoids direct contact between filter media and stainless steel filter core.

Enhanced glass fiber media ensure high filter efficiency, low-pressure drop, and guaranteed lifetime performance. For oil coalescence filters, multiple layers are wrapped around each other to avoid the risk of early oil breakthrough.

Enhanced high-performance stainless steel filter cores ensure ultimate strength and low risk of implosion.

Oil coalescence filters: Double drainage layer (outer protection paper and foam) has a large drainage capacity which is ideal for variable speed compressors. Moreover, the poly-urethane foam avoids oil re-entrainment.

Dust filters: open foam acts as a pre-filter for the largest dust particles, which prolongs the filter lifetime.

Epoxy sealed caps for reliable filtration.

Internal ribs support the element and facilitate the route of oil droplets.

C Filter Range - High-efficiency coalescing filters, removing solid particles, liquid water an oil aerosol. Total mass efficiency: 99.9% for optimum filtration, a C filter should be preceded by a G filter at all times.

G Filter Range - Coalescing filters for general purpose protection, removing solid particles, liquid water, and oil aerosol. Total mass efficiency:99% for optimum filtration, a G filter should be preceded by a water separator.

V Filter Range - Activated carbon filter for removal of oil vapour a hydrocarbon odors with a maximum remaining oil content of 0.003 mg/m3 (0.003 ppm). 1000 hour lifetime.

The quality of air required throughout a typical compressed air system varies. Offering an extensive filter range, a mark can always match your precise requirements, ensuring that all types of contamination are avoided and costs are reduced to an absolute minimum.

Weight	1.1 kg
Max Pressure	16 bar
Brand	Mark Compressors
Nominal Capacity	1500 I/min (90 m3/h)
Connection	1/2 Inch
Dimensions	90 x 21 x 228 mm
Free Space For Cartridge Replacement	75 mm

Available in C and V series.

Allowing unclean or contaminated compressed air to enter your air network holds several risks. In almost all applications, this can cause a considerable decrease in performance, as well as an increase in maintenance, costs both related to actual repairs as well as a loss in productivity. Mark's innovative filter is engineered to cost-effectively provide the best quality and meet today's ever-increasing quality demands. They are fully developed and according to ISO standards.

Double o-rings guarantee proper sealing to reduce leakage risks and increase energy savings.

Increased user-friendliness and reliability via push-on element.

Protection paper avoids direct contact between filter media and stainless steel filter core.

Enhanced glass fiber media ensure high filter efficiency, low-pressure drop, and guaranteed lifetime performance. For oil coalescence filters, multiple layers are wrapped around each other to avoid the risk of early oil breakthrough.

Enhanced high-performance stainless steel filter cores ensure ultimate strength and low risk of implosion.

Oil coalescence filters: Double drainage layer (outer protection paper and foam) has a large drainage capacity which is ideal for variable speed compressors. Moreover, the poly-urethane foam avoids oil re-entrainment.

Dust filters: open foam acts as a pre-filter for the largest dust particles, which prolongs the filter lifetime.

Epoxy sealed caps for reliable filtration.

Internal ribs support the element and facilitate the route of oil droplets.

C Filter Range - High-efficiency coalescing filters, removing solid particles, liquid water an oil aerosol. Total mass efficiency: 99.9% for optimum filtration, a C filter should be preceded by a G filter at all times.

G Filter Range - Coalescing filters for general purpose protection, removing solid particles, liquid water, and oil aerosol. Total mass efficiency:99% for optimum filtration, a G filter should be preceded by a water separator.

V Filter Range - Activated carbon filter for removal of oil vapour a hydrocarbon odors with a maximum remaining oil content of 0.003 mg/m3 (0.003 ppm). 1000 hour lifetime.

The quality of air required throughout a typical compressed air system varies. Offering an extensive filter range, a mark can always match your precise requirements, ensuring that all types of contamination are avoided and costs are reduced to an absolute minimum.

Brand	Mark Compressors
Weight	11.0 kg
Nominal Capacity	31500 I/min, (1890 m3/h)
Maximum Pressure	16 bar
Connection	3 Inch
Dimensions	210 x 57 x 720 mm
Free Space For Cartridge Replacement	200 mm

Available in C and V series

Allowing unclean or contaminated compressed air to enter your air network holds several risks. In almost all applications, this can cause a considerable decrease in performance, as well as an increase in maintenance, costs both related to actual repairs as well as a loss in productivity. Mark's innovative filter is engineered to cost-effectively provide the best quality and meet today's ever-increasing quality demands. They are fully developed and according to ISO standards.

Double o-rings guarantee proper sealing to reduce leakage risks and increase energy savings.

Increased user-friendliness and reliability via push-on element.

Protection paper avoids direct contact between filter media and stainless steel filter core.

Enhanced glass fiber media ensure high filter efficiency, low-pressure drop, and guaranteed lifetime performance. For oil coalescence filters, multiple layers are wrapped around each other to avoid the risk of early oil breakthrough.

Enhanced high-performance stainless steel filter cores ensure ultimate strength and low risk of implosion.

Oil coalescence filters: Double drainage layer (outer protection paper and foam) has a large drainage capacity which is ideal for variable speed compressors. Moreover, the poly-urethane foam avoids oil re-entrainment.

Dust filters: open foam acts as a pre-filter for the largest dust particles, which prolongs the filter lifetime.

Epoxy sealed caps for reliable filtration.

Internal ribs support the element and facilitate the route of oil droplets.

C Filter Range - High-efficiency coalescing filters, removing solid particles, liquid water an oil aerosol. Total mass efficiency: 99.9% for optimum filtration, a C filter should be preceded by a G filter at all times.

G Filter Range - Coalescing filters for general purpose protection, removing solid particles, liquid water, and oil aerosol. Total mass efficiency:99% for optimum filtration, a G filter should be preceded by a water separator.

V Filter Range - Activated carbon filter for removal of oil vapour a hydrocarbon odors with a maximum remaining oil content of 0.003 mg/m3 (0.003 ppm). 1000 hour lifetime.

The quality of air required throughout a typical compressed air system varies. Offering an extensive filter range, a mark can always match your precise requirements, ensuring that all types of contamination are avoided and costs are reduced to an absolute minimum.

Weight	4.6 kg
Brand	Mark Compressors
Nominal Capacity	15600 I/min, (936 m3/h)
Maximum Pressure	16 bar
Connection	1 1/2 Inch
Dimensions	140 x 34 x 532 mm
Free Space For Cartridge Replacement	100 mm

Available in C and V series

Allowing unclean or contaminated compressed air to enter your air network holds several risks. In almost all applications, this can cause a considerable decrease in performance, as well as an increase in maintenance, costs both related to actual repairs as well as a loss in productivity. Mark's innovative filter is engineered to cost-effectively provide the best quality and meet today's ever-increasing quality demands. They are fully developed and according to ISO standards.

Double o-rings guarantee proper sealing to reduce leakage risks and increase energy savings.

Increased user-friendliness and reliability via push-on element.

Protection paper avoids direct contact between filter media and stainless steel filter core.

Enhanced glass fiber media ensure high filter efficiency, low-pressure drop, and guaranteed lifetime performance. For oil coalescence filters, multiple layers are wrapped around each other to avoid the risk of early oil breakthrough.

Enhanced high-performance stainless steel filter cores ensure ultimate strength and low risk of implosion.

Oil coalescence filters: Double drainage layer (outer protection paper and foam) has a large drainage capacity which is ideal for variable speed compressors. Moreover, the poly-urethane foam avoids oil re-entrainment.

Dust filters: open foam acts as a pre-filter for the largest dust particles, which prolongs the filter lifetime.

Epoxy sealed caps for reliable filtration.

Internal ribs support the element and facilitate the route of oil droplets.

C Filter Range - High-efficiency coalescing filters, removing solid particles, liquid water an oil aerosol. Total mass efficiency: 99.9% for optimum filtration, a C filter should be preceded by a G filter at all times.

G Filter Range - Coalescing filters for general purpose protection, removing solid particles, liquid water, and oil aerosol. Total mass efficiency:99% for optimum filtration, a G filter should be preceded by a water separator.

V Filter Range - Activated carbon filter for removal of oil vapour a hydrocarbon odors with a maximum remaining oil content of 0.003 mg/m3 (0.003 ppm). 1000 hour lifetime.

The quality of air required throughout a typical compressed air system varies. Offering an extensive filter range, a mark can always match your precise requirements, ensuring that all types of contamination are avoided and costs are reduced to an absolute minimum.

Brand	Mark Compressors
Weight	6.9 kg
Nominal Capacity	21600 I/min, (1296 m3/h)
Maximum Pressure	16 bar
Connection	2 Inch
Dimensions	179 x 50 x 618 mm
Free Space For Cartridge Replacement	150 mm

Available in C and V series

Allowing unclean or contaminated compressed air to enter your air network holds several risks. In almost all applications, this can cause a considerable decrease in performance, as well as an increase in maintenance, costs both related to actual repairs as well as a loss in productivity. Mark's innovative filter is engineered to cost-effectively provide the best quality and meet today's ever-increasing quality demands. They are fully developed and according to ISO standards.

Double o-rings guarantee proper sealing to reduce leakage risks and increase energy savings.

Increased user-friendliness and reliability via push-on element.

Protection paper avoids direct contact between filter media and stainless steel filter core.

Enhanced glass fiber media ensure high filter efficiency, low-pressure drop, and guaranteed lifetime performance. For oil coalescence filters, multiple layers are wrapped around each other to avoid the risk of early oil breakthrough.

Enhanced high-performance stainless steel filter cores ensure ultimate strength and low risk of implosion.

Oil coalescence filters: Double drainage layer (outer protection paper and foam) has a large drainage capacity which is ideal for variable speed compressors. Moreover, the poly-urethane foam avoids oil re-entrainment.

Dust filters: open foam acts as a pre-filter for the largest dust particles, which prolongs the filter lifetime.

Epoxy sealed caps for reliable filtration.

Internal ribs support the element and facilitate the route of oil droplets.

C Filter Range - High-efficiency coalescing filters, removing solid particles, liquid water an oil aerosol. Total mass efficiency: 99.9% for optimum filtration, a C filter should be preceded by a G filter at all times.

G Filter Range - Coalescing filters for general purpose protection, removing solid particles, liquid water, and oil aerosol. Total mass efficiency:99% for optimum filtration, a G filter should be preceded by a water separator.

V Filter Range - Activated carbon filter for removal of oil vapour a hydrocarbon odors with a maximum remaining oil content of 0.003 mg/m3 (0.003 ppm). 1000 hour lifetime.

The quality of air required throughout a typical compressed air system varies. Offering an extensive filter range, a mark can always match your precise requirements, ensuring that all types of contamination are avoided and costs are reduced to an absolute minimum.

Brand	Mark Compressors
Weight	4.5 kg
Nominal Capacity	11400 I/min, (684 m3/h)
Maximum Pressure	16 bar
Connection	1 1/2 Inch
Dimensions	140 x 34 x 532 mm
Free Space For Cartridge Replacement	100 mm

Available in C and V series

Allowing unclean or contaminated compressed air to enter your air network holds several risks. In almost all applications, this can cause a considerable decrease in performance, as well as an increase in maintenance, costs both related to actual repairs as well as a loss in productivity. Mark's innovative filter is engineered to cost-effectively provide the best quality and meet today's ever-increasing quality demands. They are fully developed and according to ISO standards.

Double o-rings guarantee proper sealing to reduce leakage risks and increase energy savings.

Increased user-friendliness and reliability via push-on element.

Protection paper avoids direct contact between filter media and stainless steel filter core.

Enhanced glass fiber media ensure high filter efficiency, low-pressure drop, and guaranteed lifetime performance. For oil coalescence filters, multiple layers are wrapped around each other to avoid the risk of early oil breakthrough.

Enhanced high-performance stainless steel filter cores ensure ultimate strength and low risk of implosion.

Oil coalescence filters: Double drainage layer (outer protection paper and foam) has a large drainage capacity which is ideal for variable speed compressors. Moreover, the poly-urethane foam avoids oil re-entrainment.

Dust filters: open foam acts as a pre-filter for the largest dust particles, which prolongs the filter lifetime.

Epoxy sealed caps for reliable filtration.

Internal ribs support the element and facilitate the route of oil droplets.

C Filter Range - High-efficiency coalescing filters, removing solid particles, liquid water an oil aerosol. Total mass efficiency: 99.9% for optimum filtration, a C filter should be preceded by a G filter at all times.

G Filter Range - Coalescing filters for general purpose protection, removing solid particles, liquid water, and oil aerosol. Total mass efficiency:99% for optimum filtration, a G filter should be preceded by a water separator.

V Filter Range - Activated carbon filter for removal of oil vapour a hydrocarbon odors with a maximum remaining oil content of 0.003 mg/m3 (0.003 ppm). 1000 hour lifetime.

The quality of air required throughout a typical compressed air system varies. Offering an extensive filter range, a mark can always match your precise requirements, ensuring that all types of contamination are avoided and costs are reduced to an absolute minimum.

Brand	Mark Compressors
Weight	1.9 kg
Nominal Capacity	3000 I/min, (180 m3/h)
Maximum Pressure	16 bar
Connection	3/4"
Dimensions	110 x 27.5 x 303 mm
Free Space For Cartridge Replacement	75 mm

Available in C and V series

Allowing unclean or contaminated compressed air to enter your air network holds several risks. In almost all applications, this can cause a considerable decrease in performance, as well as an increase in maintenance, costs both related to actual repairs as well as a loss in productivity. Mark's innovative filter is engineered to cost-effectively provide the best quality and meet today's ever-increasing quality demands. They are fully developed and according to ISO standards.

Double o-rings guarantee proper sealing to reduce leakage risks and increase energy savings.

Increased user-friendliness and reliability via push-on element.

Protection paper avoids direct contact between filter media and stainless steel filter core.

Enhanced glass fiber media ensure high filter efficiency, low-pressure drop, and guaranteed lifetime performance. For oil coalescence filters, multiple layers are wrapped around each other to avoid the risk of early oil breakthrough.

Enhanced high-performance stainless steel filter cores ensure ultimate strength and low risk of implosion.

Oil coalescence filters: Double drainage layer (outer protection paper and foam) has a large drainage capacity which is ideal for variable speed compressors. Moreover, the poly-urethane foam avoids oil re-entrainment.

Dust filters: open foam acts as a pre-filter for the largest dust particles, which prolongs the filter lifetime.

Epoxy sealed caps for reliable filtration.

Internal ribs support the element and facilitate the route of oil droplets.

C Filter Range - High-efficiency coalescing filters, removing solid particles, liquid water an oil aerosol. Total mass efficiency: 99.9% for optimum filtration, a C filter should be preceded by a G filter at all times.

G Filter Range - Coalescing filters for general purpose protection, removing solid particles, liquid water, and oil aerosol. Total mass efficiency:99% for optimum filtration, a G filter should be preceded by a water separator.

V Filter Range - Activated carbon filter for removal of oil vapour a hydrocarbon odors with a maximum remaining oil content of 0.003 mg/m3 (0.003 ppm). 1000 hour lifetime.

The quality of air required throughout a typical compressed air system varies. Offering an extensive filter range, a mark can always match your precise requirements, ensuring that all types of contamination are avoided and costs are reduced to an absolute minimum.

Brand	Mark Compressors
Weight	2.1 kg
Nominal Capacity	4800 I/min, (88 m3/h)
Maximum Pressure	16 bar
Connection	1 Inch
Dimensions	110 x 27.5 x 303 mm
Free Space For Cartridge Replacement	75 mm

Available in C and V series

Allowing unclean or contaminated compressed air to enter your air network holds several risks. In almost all applications, this can cause a considerable decrease in performance, as well as an increase in maintenance, costs both related to actual repairs as well as a loss in productivity. Mark's innovative filter is engineered to cost-effectively provide the best quality and meet today's ever-increasing quality demands. They are fully developed and according to ISO standards.

Double o-rings guarantee proper sealing to reduce leakage risks and increase energy savings.

Increased user-friendliness and reliability via push-on element.

Protection paper avoids direct contact between filter media and stainless steel filter core.

Enhanced glass fiber media ensure high filter efficiency, low-pressure drop, and guaranteed lifetime performance. For oil coalescence filters, multiple layers are wrapped around each other to avoid the risk of early oil breakthrough.

Enhanced high-performance stainless steel filter cores ensure ultimate strength and low risk of implosion.

Oil coalescence filters: Double drainage layer (outer protection paper and foam) has a large drainage capacity which is ideal for variable speed compressors. Moreover, the poly-urethane foam avoids oil re-entrainment.

Dust filters: open foam acts as a pre-filter for the largest dust particles, which prolongs the filter lifetime.

Epoxy sealed caps for reliable filtration.

Internal ribs support the element and facilitate the route of oil droplets.

C Filter Range - High-efficiency coalescing filters, removing solid particles, liquid water an oil aerosol. Total mass efficiency: 99.9% for optimum filtration, a C filter should be preceded by a G filter at all times.

G Filter Range - Coalescing filters for general purpose protection, removing solid particles, liquid water, and oil aerosol. Total mass efficiency:99% for optimum filtration, a G filter should be preceded by a water separator.

V Filter Range - Activated carbon filter for removal of oil vapour a hydrocarbon odors with a maximum remaining oil content of 0.003 mg/m3 (0.003 ppm). 1000 hour lifetime.

The quality of air required throughout a typical compressed air system varies. Offering an extensive filter range, a mark can always match your precise requirements, ensuring that all types of contamination are avoided and costs are reduced to an absolute minimum.

Brand	Mark Compressors
Weight	12.6 kg
Nominal Capacity	40500 I/min, (2430 m3/h)
Maximum Pressure	16 bar
Connection	3 Inch
Dimensions	210 x 57 x 890 mm
Free Space For Cartridge Replacement	200 mm

Available in C and V series

Allowing unclean or contaminated compressed air to enter your air network holds several risks. In almost all applications, this can cause a considerable decrease in performance, as well as an increase in maintenance, costs both related to actual repairs as well as a loss in productivity. Mark's innovative filter is engineered to cost-effectively provide the best quality and meet today's ever-increasing quality demands. They are fully developed and according to ISO standards.

Double o-rings guarantee proper sealing to reduce leakage risks and increase energy savings.

Increased user-friendliness and reliability via push-on element.

Protection paper avoids direct contact between filter media and stainless steel filter core.

Enhanced glass fiber media ensure high filter efficiency, low-pressure drop, and guaranteed lifetime performance. For oil coalescence filters, multiple layers are wrapped around each other to avoid the risk of early oil breakthrough.

Enhanced high-performance stainless steel filter cores ensure ultimate strength and low risk of implosion.

Oil coalescence filters: Double drainage layer (outer protection paper and foam) has a large drainage capacity which is ideal for variable speed compressors. Moreover, the poly-urethane foam avoids oil re-entrainment.

Dust filters: open foam acts as a pre-filter for the largest dust particles, which prolongs the filter lifetime.

Epoxy sealed caps for reliable filtration.

Internal ribs support the element and facilitate the route of oil droplets.

C Filter Range - High-efficiency coalescing filters, removing solid particles, liquid water an oil aerosol. Total mass efficiency: 99.9% for optimum filtration, a C filter should be preceded by a G filter at all times.

G Filter Range - Coalescing filters for general purpose protection, removing solid particles, liquid water, and oil aerosol. Total mass efficiency:99% for optimum filtration, a G filter should be preceded by a water separator.

V Filter Range - Activated carbon filter for removal of oil vapour a hydrocarbon odors with a maximum remaining oil content of 0.003 mg/m3 (0.003 ppm). 1000 hour lifetime.

The quality of air required throughout a typical compressed air system varies. Offering an extensive filter range, a mark can always match your precise requirements, ensuring that all types of contamination are avoided and costs are reduced to an absolute minimum.