Mech Spares Rubber Products

• Fine thickness
• Flexible
• Unmatched quality

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

• Material: TPU SPCC
• Specific Gravity (ASTM D792): 1.20
• Hardness (ASTM D2240): 95
• Tensile Strength (ASTM D412): 317
• 100% Modulus (ASTM D412): 110
• 300% Modulus (ASTM D412): 170
• Compression Set 70h/70ºC (ASTM D395B): 34
• Compression Set 70h/100ºC (ASTM D395B): 56

• Working Speed: 0.03 ~ 0.5 m/sec
• Working Temperature: -20ºC ~ 100ºC

• Excellent Heat resistance
• Excellent resistance to oils
• Low compression set
• Good fuel resistance
• Excellent ozone and weather resistance

Applications:

• Engine Oil Seals
• Fuel Systems
• High Temperature Seals
• Petrochemical Systems

• High chemical resistance
• Withstand speeds up to 30 m/s (5 900 ft/min)
• Wide operating temperature range, –70 to 250 °C (–95 to 480 °F)
• Withstand pressures up to 3,5 MPa (500 psi)
• Withstand dry running

• Broad temprature range
• Good ozone resistance
• Resistant to compression set
• High resistance to water

• Seals (static) for extreme temperature applications
• Food applications
• Medical devices
• FDA applications

• Excellent abrasion resistance
• Excellent tensile strength and high rigidity
• Low compression set
• Good resistance to petroleum oils and hydrocarbon fuels
• Good weather and ozone resistance

• Seals for high hydraulic pressure
• Highly stressed parts subject to wear

• Fine thickness
• Flexible
• Unmatched quality

• DIN: 3760 Standard
• Common Materials: Nitrile, Fluorocarbon, Silicone, EPDM, Polyacrylate, Neoprene
• Spring make: Carbon Steel – Stainless Available
• Pressure Rating: Max 7psi
• Mounting: Press-fit

• Smooth finishing
• Excellent elasticity
• Abrasion resistance

• DIN: 3760 Standard
• Common Materials: Nitrile, Fluorocarbon, Silicone, EPDM, Polyacrylate, Neoprene
• Spring make: Carbon Steel Stainless Available
• Pressure Rating: Max 7psi
• Mounting: Press-fit
• Comments: Common grease seal type
• Rotary Motion Only. Generally used for sealing lower pressure (up to 0.5 bar/7psi) fluids or heavy greases depending on shaft speed

• DIN: 3760 Standard
• Common Materials: Nitrile, Fluorocarbon, Silicone, EPDM, Polyacrylate, Neoprene
• Spring make: Carbon Steel – Stainless Available
• Pressure Rating: Max 7psi
• Mounting: Press - Fit

• High chemical resistance
• Withstand speeds up to 30 m/s (5 900 ft/min)
• Wide operating temperature range, –70 to 250 °C (–95 to 480 °F)
• Withstand pressures up to 3,5 MPa (500 psi)
• Withstand dry running

• High thermal conductivity
• Low friction
• Low thermal expansion coefficient
• Outstanding thermal shock resistance
• Extreme hardness and wear resistance
• Exceptional corrosion resistance
• Good mechanical strength
• High temperature capabilities
• Abrasion resistant
• Impervious to liquids and gases
• Wide ranging compatibility with other materials

Applications:

• Centrifugal Pumps
• Submersible Pumps
• Compressors
• Mixers and Steam joints
• Gear pumps
• Propulsion shaft sealing
• High temperature and pressure applications
• Abrasive and aggressive fluid applications

We have been ranked as the most dependable and leading firm all over the nation and actively emerged in providing AW Oil Seals. The offered oil seals are for sealing non-pressure medium, particularly for grease. In addition to this, the entire range of oil seals is passed through a series of practical tests for assuring quality. Customers can avail these oil seals at nominal rates.

Features:

•Easy to install
•Leak proof
•Long life
Specifications:

•DIN: 3760 Standard
•Common Materials: Nitrile, Fluorocarbon, Silicone, EPDM, Polyacrylate, Neoprene
•Spring make: N/A
•Pressure Rating: Max 7psi
•Mounting: Press-fit

• High chemical resistance
• Withstand speeds up to 30 m/s (5 900 ft/min)
• Wide operating temperature range, –70 to +250 °C (–95 to +480 °F)
• Withstand pressures up to 3,5 MPa (500 psi)
• Withstand dry running

Design Attributes

• Grease Seals feature precision sealing designs that are matched to many original equipment or aftermarket applications.
• Grease Seals help ensure consistent and reliable performance.

Applications

The seals are used in a full range of equipment in thousands of applications, such as

• Automotive
• Manufacturing
• Off-highway
• Oil refineries
• Power transmission

Additional Information:

• Item Code: Metal-Case-No-Spring

Standards and other documents relating to radial shaft seals

• ISO 6194-1:1982 Rotary shaft lip type seals – Nominal dimensions and tolerances
• ISO 6194-2:1991 Rotary shaft lip type seals – Vocabulary
• ISO 6194-3:1988 Rotary shaft lip type seals – Storage, handling and installation
• ISO 6194-4:1988 Rotary shaft lip type seals – Performance test procedures
• ISO 6194-5:1990 Rotary shaft lip type seals – Identification of visual imperfections

• SAE J946-1989 Application Guide to Radial Lip Seals

• RMA OS-4, 1984 Application Guide for Radial Lip Type Shaft Seals
• RMA OS-7, 1982 Storage and Handling Guide for Radial Lip Type Shaft Seals
• RMA OS-8, 1977 Visual Variations Guide for Rotating Shaft Seals

• DIN 3760 Radial-Wellendichtringe (Radial shaft seals)
• DIN 3761 Radial-Wellendichtringe fur Kraftfahrzeuge (Motor Vehicles Radial shaft seals), Parts 1-15. This standard covers all aspects including vocabulary, material requirements and test methods.

• GOST 8752-79. CIS standard for rotary shaft seals.