X

MG Materials

Naraina Vihar, Delhi

| GST  07AAYFM8740P1Z4

| Verified Supplier

|

★★★★★
★★★★★
View Mobile Number 78% Response Rate
Hi
I agree to the terms and privacy policy
Verifying...
1

Have a requirement?
Get Best Price

Products & Services

+View All

Fire Doors

Distributor / Channel Partner of a wide range of products which include Fire Door Seals Intumescent Strips Rigid, Fire Door, Fibreglass Soundproof Door, Steel Fire Door MGM, Pyroplex Intumescent Fire Seals for Fire Resistant Doors and Astroflame Intumescent Fire Seals Astro Strip.

Fire Door Seals Intumescent Strips Rigid
  • Fire Door Seals Intumescent Strips Rigid
  • Fire Door Seals Intumescent Strips Rigid
  • Fire Door Seals Intumescent Strips Rigid
Interested in this product?
Get Best Quote

Application: Fire Rated Doors
Fire Resistance Period: 30 to 120 minutes
Insulation/integrity: Integrity and insulation
Test Standard: BS 476 Part 20: 22: 1987 and BS 476: EN 1634-1

Main Features
  • 30, 60, 90 and 120 minute systems available.
  • Provided with rigid box outer for added durability.
  • Supplied with a self-adhesive backer for ease of application.
  • Cut to 2.1m as standard.
  • Identification on each product ensures full traceability.
  • Available in a range of 6 standard colours.
Installation Instructions

1. Select the appropriate seal using the door test evidence, which will identify the size intumescent seal required.

2. The seal needs to be located centrally in either the door leaf or frame.

3. Route a groove suitable for the size of intumescent seal selected.

4. Clean the rebate to remove any dust. Remove the self-adhesive backing liner from the product and push fit into the routed groove.

5. To achieve excellent adhesion seals must be applied to clean, dry surfaces at temperatures between +5°C and +40°C.




Field of Application

Seals have been specifically designed for use in the following applications:

  • Rebates in timber door leafs or door frames.
  • Use on single and double action leaf doors.
  • Use on latched and unlatched doors.
  • New build and retro-fit applications.
PART NO.PROFILE DIMENSIONS [W X D MM]30 MINUTE FIRE RESISTANCE*60 MINUTE FIRE RESISTANCE*90 MINUTE FIRE RESISTANCE*120 MINUTE FIRE RESISTANCE*
850010×4
870015×4
860020×4
880025×4
3009430×4
3007638×4
3013715×6
3013825×6

View Complete Details

Yes, I am interested!

Fire Door
  • Fire Door
  • Fire Door
  • Fire Door
  • Fire Door
Interested in this product?
Get Best Quote

Fire Door

Get Latest Price

p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 8.0px Helvetica}

Fire Rating 120 Minutes and 60 Minutes
Fire Door Shutter & Frames
As per design thickneses. Brands Promat Fire Doors
The design and construction of fi re resisting doors

is a complex operation involving the skills and

specialised knowledge of architects, fi re experts,

door manufacturers and ironmongers.

The architect is the fi rst in the line of those concerned with the provision

of fi re doors. It is he who ascertains the requirements of the building

users and decides where and in what form doors will be required. He

also assembles the specialised information from the other experts,

and arranges for the doors to be manufactured.

The fi rst principle to be considered in relation to Fire Resisting Doors

is that, in most respects, they are merely ordinary doors with certain

additional features, and throughout most of their life will be operating

as such. Indeed it is hoped that most fi re doors never have to function

in a fi re situation.

Fire resisting doors, therefore, have to be opened, closed, locked,

latched, bolted, cleaned and maintained like any other door. They

need to be able to resist the wear and tear of normal use and in many

cases, of abuse. They need to be of robust construction and capable

of being fi tted with a wide range of glazed panels and ironmongery.

They frequently need to be protected from damage.

The planning of a building involves arranging of circulation routes

and allocating rooms and spaces, with all their servicing needs. It is

then necessary to locate openings and/or doors to provide access

from space to space. Single or double doors must give suitably sized

clear openings to permit the passage of pedestrian and vehicular

traffi c. Doors must be hung or pivoted to open and close to suit the

requirements of the occupants. Doors will frequently be required to be

self closing and some will be fi tted with locks

View Complete Details

Yes, I am interested!

Fibreglass Soundproof Door
  • Fibreglass Soundproof Door
  • Fibreglass Soundproof Door
Interested in this product?
Get Best Quote

Inner Frame Material: Wooden Inner FrameMixed Inner Frame: Hollow Steel and WoodWooden Inner Frame: Wood GraftingPosition: InteriorSurface Finishing: FinishedProduct: High Quality PU Foam Filling FRP DoorColor: Brown/Black/WhiteFitting: Door & Window ScreensApplication: Industry, Agriculture, Coal Yard etcUsage: Warehouse, Villa, Temporary Offices, Dormitories,Certification: TestedCustomized: Non-CustomizedTrademark: XINGLI BEIHAITransport Package: Carton PackingSpecification: 6P

decorative fibre doors & windows that are not only elegant, but also high in quality &. Affordable. We provides unique design with unlimited decorating possibilities. These beautiful & durable fibre glass doors & windows are available in a variety of styles. These product are widely used in Houses, Hotels, Club & so on.

Besides, We can make wood doors according to your special requirement, such as size, style, structure and so on, everything can be customized. The wood we often use for our doors include oak, alder, pine, sapele, okume and so on. More information about us please see below.

Product Application:
Industrial factory, doors in large factories and mines/hangar/garage etc.
Products features: Light, translucent, antiseptic, heat insulation, ultraviolet rays, ageing resistance etc.


We are a passionate FRP Door manufacturer specializing in a variety of materials and sizes. We promote modern, simple, innovative, and artistic FRP Door. Our products are sold throughout the USA, Europe, Middle East and Australia etc.
Further details, please feel free to contact us!

If you have any question and any quotation, please contact us freely! !

We will reply you prompt!
Product Features:
1.FRP door supplier of shanghai EXPO
2.Environmental protection
3.Nice relief surface
4.Third party design
5.Anti-water quality

Many advantage of our Fiberglass door: 
(1)Aesthetically Pleasing
-True resemblance of a real oak wood door
-Unique textured woodgrain detail in every design
-Elegant curb apeal
-Enhanced look and appearance
 
(2)Superior Functionality
-Fiberglass door panels will not dent,rust or rot
-High performance lite frame resists discoloration and warping
-Composte adjustable threshold limits air and water infiltration
 
(3)Security and Energy Effciency
-Polyurethane foam core
-CFC free foam
-Environmentally friendly
-16'' wood lock block and jamb security plate resists forced entry
-Foam compression weatherstrip prevents drafts
-Triple pane decorative glass

View Complete Details

Yes, I am interested!

Steel Fire Door MGM
  • Steel Fire Door MGM
  • Steel Fire Door MGM
  • Steel Fire Door MGM
  • Steel Fire Door MGM
Interested in this product?
Get Best Quote

Steel Fire Door MGM

Get Latest Price

Providing and fixing of Hollow metal fire rated doors as per IS 3614 part-1 & part-2 for stability and

integrity. Pressed Galvanized steel confirming to IS 277 with the following specification.

Recommended fire door shall have doors tested at CBRI or ARAI for maximum rating of 2hrs with

vision panel. Test certificates should be available for vision lites /panels as part of the fire door

assembly. Independent glass test certificates will not be accepted. Manufacturer test certificate shall

cover doors both single and double leaf and all doors supplied should be within the tested specimen,

deviation in specification and sheet thickness other than what is mentioned in the test certificates are

not allowed. Proper label confirming the type of door and the hourly rating is mandatory. Approved

manufacturer Shakti Hormann or approved equivalent.

Door frame shall be double rebate profile of size 143 x 57 mm made out of 1.60mm (16gauge)

minimum thick galvanized steel sheet. Frames shall be Mitered and field assembled with self tabs. All

provision should be mortised, drilled and tapped for receiving appropriate hardware. Rubber door

silencers should be provided on the striking jamb. Frames should be provided with back plate bracket

and anchor fasteners for installation on a finished plastered masonry wall opening. Once frame

installed should be grouted with cement & sand slurry necessary for fire doors on the clear masonry

opening.

Door leaf shall be 46mm thick fully flush double skin door with or without vision lite. Door leaf shall

be manufactured from 1.2mm (18guage) minimum thick galvanised steel sheet. The internal

construction of the door should be rigid reinforcement pads for receiving appropriate hardware. The

infill material shall be resin bonded honeycomb core. All doors shall be factory prepped for receiving

appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers.

The edges should be interlocked with a bending radius of 1.4mm. For pair of doors astragals has to be

provided on the meeting stile for both active and inactive leaf. Vision lite wherever applicable should

be provided as per manufacturers recommendation with a beeding and screws from inside. The glass

should be 6mm clear borosilicate fire rated glass of relavant rating of the door.

All doors and frames shall be finished with polyurethane aliphatic grade paint of approved colour.

The door leaf and frame shall have passed minimum 250 hours of salt spray test.

Rate should include supply and installation of door and hardware set as mentioned in the door and

hardware schedule.

2Hrs Fire Rated Door Double leaf of size : 1500 x 2250 mm With vision panel with hardware set for

each leaf as follows:

Ball bearing butt hinge 4" x 3" x3 mm in SSS

Mortice sash lock 50mm BS, 20mm sq for end strip, SSS 1"

6 pin EP cyl. L=70mm both side keys in SNP (1 each)

Tubular lever handle with roses and esc. SSS (1 each)

Door closer spring size 3 with standard arm, CE marked

Concealed flush bolt body with rod, Length - 265mm , Vision panel of 6mm thick borosilicate Fire

Rated clear glass of size 200mm (W) x 300mm (H), Self adhesive side roll (Ceramic Tape) as

required

Promat Steel Door

View Complete Details

Yes, I am interested!

Pyroplex Intumescent Fire Seals for Fire Resistant Doors
  • Pyroplex Intumescent Fire Seals for Fire Resistant Doors
  • Pyroplex Intumescent Fire Seals for Fire Resistant Doors
  • Pyroplex Intumescent Fire Seals for Fire Resistant Doors
  • Pyroplex Intumescent Fire Seals for Fire Resistant Doors
  • Pyroplex Intumescent Fire Seals for Fire Resistant Doors
  • Pyroplex Intumescent Fire Seals for Fire Resistant Doors
Interested in this product?
Get Best Quote

 Pyroplex® Intumescent Sheet is a calendered product

and is supplied in 1.8mmthickness in 50mrollswith a

standard 1mwidth.

Pyroplex® Intumescent Sheet has been specifically

designed for:

•  Architectural fire resistant door protection

•  Electrical protection

•  Panel products for fire doors

Typically the product is used for the lining of fire door

panels, safes, filing cabinets and storage boxes. It is also

p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 10.0px Helvetica} span.s1 {font: 8.5px Helvetica}

ideal for use under hinges, locks and door closers.

p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 10.0px Times; color: #ff2600} p.p2 {margin: 0.0px 0.0px 0.0px 0.0px; font: 8.5px Helvetica}

Field of Application

Pyroplex® Intumescent Sheet has been specifically designed for:

• Architectural fire resistant door protection

Can provide a simple and concealed protection for associated

door hardware. During fire situation the heat generated is

conducted through the hardware, which if not protected could

lead to integrity and insulation failure.

• Electrical protection

Used for protection for electrical installations, typically

includes electrical box protection and conduit systems and can

be die cut for down-lighters.

• Panel products

Has been used for applications including panelling systems for

up-grading of specialist fire doors, where the intumescent has

been laminated to the core of the door and lined with a finish

facing, to provide insulation of the core in a fire situation.

Product Features

• Proven performance in terms of fire resistance

• Fully flexible, high shear and tear resistant yet easy to cut

• Supplied in 50m x 1m rolls with a 1.8mm thickness

• Unaffected by moisture

Expansion Characteristics:

The intumescent material exhibits an expansion factor of 20:1

ratio when exposed to elevated temperatures. During the

heating phase the material expands multi-directionally and

forms a solid char which provides a seal to maintain insulation

and integrity to restrict the passage of fire.

Product Testing

Pyroplex® have carried out numerous independent fire

resistance tests to confirm the suitability of the product and to

demonstrate product compliance by utilising BS476: Part 22

1987 and other international standards.

For intumescent hinge applications refer to WF Report No.

 

167746.
p.p1 {margin: 0.0px 0.0px 0.0px 0.0px; font: 10.0px Times; color: #ff2600} p.p2 {margin: 0.0px 0.0px 0.0px 0.0px; font: 8.5px Helvetica} p.p3 {margin: 0.0px 0.0px 0.0px 0.0px; font: 8.5px Times}

Health and Safety Information

For detailed information on this product please refer to the

relevant Material Safety Data Sheet which is available on

request or downloadable at www.pyroplex.com.

Store dry and in a cool place (not above 35°C) and ensure

sufficient ventilation.

Product Guarantee

Providing the product is installed in accordance with the

requirements of the guidance document the product is

guaranteed for a period of 10 years.

meets the requirements of BS EN ISO 9001:2000, and is

independently verified by BSI Quality Assurance under

Certificate FM10371.

Technical Support and Guidance

Should you require any further information regarding this

product please contact Pyroplex® Limited or visit our website,

www.pyroplex.com where you will be able to download

Material Safety and Technical Data Sheets.

View Complete Details

Yes, I am interested!

Astroflame Intumescent Fire Seals Astro Strip
  • Astroflame Intumescent Fire Seals Astro Strip
  • Astroflame Intumescent Fire Seals Astro Strip
  • Astroflame Intumescent Fire Seals Astro Strip
  • Astroflame Intumescent Fire Seals Astro Strip
  • Astroflame Intumescent Fire Seals Astro Strip
  • Astroflame Intumescent Fire Seals Astro Strip
  • Astroflame Intumescent Fire Seals Astro Strip
  • Astroflame Intumescent Fire Seals Astro Strip
Interested in this product?
Get Best Quote

Certifire Approved Fire Seals & Smoke Seals.

Passed at BS476 Part 22 & 31.1.

Smoke Seals to EN1634-3.

30 or 60 minute rated types.

Available in 12 Colours.

All seals available in a pre-pack containing 2x2.1M and 1x1.05m lengths complete with fitting instructions.

All seals are supplied with self-adhesive backing tape.

Standard brush pile length 6mm.

Alternative Smoke Seal fittings: Grey 6mm Nylon pile to Black or White.

Longer length, Grey Nylon pile, 7mm, 9mm or 11mm.

Alternative seals: Black Neoprene Rubber draught seals in single or twin blade.


View Complete Details

Yes, I am interested!

Promaseal Intumescent Strips for Fire Doors Intumex L Promat
  • Promaseal Intumescent Strips for Fire Doors Intumex L Promat
  • Promaseal Intumescent Strips for Fire Doors Intumex L Promat
  • Promaseal Intumescent Strips for Fire Doors Intumex L Promat
  • Promaseal Intumescent Strips for Fire Doors Intumex L Promat
Interested in this product?
Get Best Quote

Application: Fire resistant applications
Fire Resistance Period: 60 - 120 minutes
Insulation/integrity: Insulation and Integrity
Test Standard: BS 476: Part 20:22:1987

Intumescent Sheet has been specifically designed for:

  • Architectural fire resistant door protection.
  • Electrical protection.
  • Panel products for fire doors.
Main Features
  • Proven performance in terms of fire resistance.
  • Fully flexible, high shear and tear resistant yet easy to cut.
  • Supplied in 50m x 1m rolls with a 1.8mm thickness.
  • Unaffected by moisture.
Field of Application

Intumescent Sheet has been specifically designed for:

Architectural fire resistant door protection:
Can provide a simple and concealed protection for associated door hardware. During a fire situation, the heat generated is conducted through the hardware, which if not protected could lead to integrity and insulation failure.

Electrical protection:
Used for protection for electrical installations, typically includes electrical box protection and conduit systems and can be die cut for down-lighters.

Panel products:
Has been used for applications including panelling systems for upgrading of specialist fire doors, where the intumescent has been laminated to the core of the door and lined with a finish facing, to provide insulation of the core in a fire situation.

Guarantee

 

Providing the product is installed in accordance with the requirements of the guidance document the product is guaranteed for a period of 10 years.

View Complete Details

Yes, I am interested!
Tell us what you
need
Receive seller
details
Seal the deal
Pay with IndiaMART
Save time! Get Best Deal
I agree to the terms and privacy policy