X

MG Materials

Naraina Vihar, Delhi

| GST  07AAYFM8740P1Z4

| Verified Supplier

|

★★★★★
★★★★★
View Mobile Number 78% Response Rate
Hi
I agree to the terms and privacy policy
Verifying...
1

Have a requirement?
Get Best Price

Products & Services

+View All

Passive Fire Protection

Our range of products include PROMASTOP Cement, Fire Proof Acrylic Sealant For Fire Stopping Promaseal, Promaseal Bulkhead Sealer System, CAFCO 300, Cafco FENDOLITE MII Portland Cement and Fire Resistant Mortar.

PROMASTOP Cement
Interested in this product?
Get Best Quote

PROMASTOP Cement

Rs 2,000 / BagGet Latest Price

Minimum Order Quantity: 20 Bag

Fire Resistant Cement

PROMASTOP® Cement is a lightweight fire resistant cement supplied as a dry powder and to be mixed with water for on-site preparation. This fine grade cement powder is white in colour for ease of identification and has a quick setting time. When the product is set, it presents a hard surface finish and does not shrink regardless of temperature change. It is readily drilled for post installation of services.

PROMASTOP® Cement has been tested up to a 240 minute fire resistance with various penetration seals in concrete/masonry floors and walls (with an equal or greater fire resistance level). It is not applicable in lightweight partitions.

For floor applications, PROMASTOP® Cement can provide some degree of loadbearing capability depending on the thickness of the cement layer applied. Please consult Promat to determine the thickness to meet a specific loadbearing performance requirement.

View Complete Details

Yes, I am interested!

Fire Proof Acrylic Sealant For Fire Stopping Promaseal
Interested in this product?
Get Best Quote

Fire Proof Acrylic Sealant For Fire Stopping Promaseal

Rs 7,500 / LitreGet Latest Price

Minimum Order Quantity: 6 Litre


" SALE - PROMASEAL -A ARYCLIC SEALANT"

PROMASEAL-A ARCYLIC SEALANT AVAILABLE AT 12 KG -PAIL. PRICE - RS 600 PER/KG .MINIMUM ORDER QUANTITY MUST BE 25" .LOCATED AT BHIWANDI WAREHOUSE.

General Description
PROMASEAL®-A is an acrylic based, single component fire stopping
sealant. Joints without movement can be sealed quickly thanks to
its outstanding application qualities. A common emulsion paint can
be used to colour the joints.

Field Of Application
PROMASEAL®-A is a fire stopping sealant for joints in walls and floors.
It is designed for use with joints without movement to seal against the
spread of smoke and fire.

System Advantage / Customer Benefit
• Can be painted
• Good adhesion to various substrates

General Technical Properties
Colour - white/grey
Consistency - paste
Density wet - Wet : 1.6 ± 0.2 g/cm3 dry : 1.8 ± 0.2 g/cm3
Solid Content - 86 ± 5 wght.%
Ash Content approx. - 70 % (600 °C,15 minutes)
Movement Capabilities - elongation minimum 7.5%,
compression minimum 7.5%

Storage Requirements
• Store in cool and dry conditions
• Protect from heat and frost
• Shelf life of original sealed
containers at least 12 months
• Once opened, containers should
be finished swiftly

Safety Instructions
• Keep out of reach of children
• Avoid contact with food or
beverages
• Please refer to the safety data
sheet for additional advice

Test Certificate / Approval
• EN 1366-3 (cable/cable bundles, pipes), EN 13501-2/classification reports

• EN 1366-4 (joints), EN 13501-2/classification reports

View Complete Details

Yes, I am interested!

Promaseal Bulkhead Sealer System
Interested in this product?
Get Best Quote

Promaseal Bulkhead Sealer System

Rs 16,500 / UnitGet Latest Price

Minimum Order Quantity: 24 Unit

Installation Services Required(Y/N)No
UsageIndustrial, Commercial , Household

PROMASEALBulkhead Sealer System is made using high density mineral wool that is coated with PROMASEALBulkhead Sealer. The coated mineral wool remains in-situ during a fire situation and forms a barrier against the passage of flame, smoke and toxic gases.

The system is the simplest of all fire stopping products to install. It is also one of, if not the most economical product to use. It can be installed in both concrete/masonry floors and walls (with an equal or greater fire resistance level) and has been tested up to 120 minutes with various penetrating applications.

In many buildings, power cables (e.g. information technology and telecommunication services) are continuously added, altered and removed. PROMASEALBulkhead Sealer System enables this process to be carried out with the minimum of mess and inconvenience.

PROMASEALBulkhead Sealer Systems are non loadbearing. Please consult Promat for loadbearing PROMASEALBulkhead Sealer Systems.

HANDLINGPackaging - 25kg containers or as pre-coated batts measuring 1200mm x 600mm

Storage - Indoors in dry conditions between 10 DegreeC and 38 DegreeC.
Protect from frost, excessive heat (above 45C) and strong radiant sunlight.
Shelf life - Maximum 10 months in original sealed containers
Environmental - Do not discharge into drains, watercourses or soil.


PROMASEALBulkhead Sealer are manufactured under a quality management system certified in accordance with ISO 9001 2008. The production unit has passed the site audit of ISO 14001 and all manufacturing processes are in accordance with the environmental standards of ISO 14001 2004 and the safety standards of AS 4801 2001.

View Complete Details

Yes, I am interested!

CAFCO 300
Interested in this product?
Get Best Quote

CAFCO 300

Get Latest Price

Vermiculite & Gypsum Based Wet Mix Spray

CAFCO 300 is a spray or trowel applied, single package factory controlled premix, based on vermiculite and gypsum.

CAFCO 300 is a lightweight coating that provides very efficient fire resistance with minimal thickness to steel and concrete structures, metal floor and roof decks, return air plenums and air handling ductwork.

Building types that benefit from the use of CAFCO 300 include a wide range of educational, leisure and entertainment centres, and commercial projects.

Applications

Ceilings

Partitions

Ducts

GENERAL TECHNICAL PROPERTIES
Fire resistance

Steel structures protected with CAFCO 300 have undergone fire resistance tests up to 240 minutes in approved independent laboratories to recognised standards throughout the world, including

  • Australia (AS 1530 Part 4 2005)
  • Belgium (NBN S 21-202 1980)
  • France (August 1999 Ministry Decree)
  • Germany (DIN 4102 1977-2009 and DIN EN 1363-1 1999-2010)
  • Harmonised European Standard ENV 13381 Part 4 2002
  • UK (BS 476 Part 6 1989, Part 7 1997 and Part 21 1987)
  • USA (ASTM E119 1998)

Fire resistance test results relate solely to the constructions tested and test conditions imposed.

Spread of flame (as defined by building regulations)Class 0
AlkalinitypH8.0~8.5
Thermal conductivityW/m DegreeK0.078
Theoretical coverage at 15mm thicknessm/tonne217
Number of coatsOne or more as required
CureBy hydraulic set
Initial set at 20 DegreeC and 50% RH10~15 hours without accelerator
Density (ASTM E605 1993)kg/m310 +- 15% without accelerator
310 - 10% (approximate) with accelerator
Bond impact (ASTM E760 1992-2005)No cracks or delaminations
Air erosion resistance (ASTM E859 1993-2006)No erosion
Compressive strength (ASTM E761 1992-2005)kg/cm1.22
Deflection effect (ASTM E759 1992-2005)No spalling, delamination or cracking
Corrosion resistanceDoes not promote corrosion of steel and does not require application over primed steel. Please seek advice of qualified structural engineer concerning long term corrosion protection.
Colour and texture conditionOff-white with a monolithic spray texture

View Complete Details

Yes, I am interested!

Cafco FENDOLITE MII Portland Cement
Interested in this product?
Get Best Quote
Vermiculite & Portland Cement Based Wet Mix Spray

Cafco FENDOLITE® MII is a spray applied, single package factory controlled premix, based on vermiculite and Portland cement. It may be floated or roller finished.

Cafco FENDOLITE® MII produces a monolithic coating able to withstand thermal shocks experienced typically in a high intensity hydrocarbon fire. Concrete structures in particular, will be protected from explosive spalling when protected using Cafco FENDOLITE® MII.

Although low in density, thus significantly reducing dead load, Cafco FENDOLITE® MII is highly durable and will not crack or spall under mechanical impact.

Cafco FENDOLITE® MII is used for application to construction elements such as concrete or individual steel sections, particularly where off-site application is required. It is suitable for exterior use on structures and vessels in the oil, gas, petrochemical and power industries, and for refurbishment or upgrading of existing tunnel structures.

TECHNICAL PROPERTIES
Fire resistance

Steel and concrete structures protected with Cafco FENDOLITE® MII have undergone fire resistance tests up to 240 minutes in approved independant laboratories to recognised standards throughout the world, including:

  • Australia (AS 1530: Part 4: 2005)
  • France, Hydrocarbon Modified Curve
  • Germany (DIN 4102: 1977-2009)
  • International Standard ISO 834: 2002
  • Italy (UNI 11076)
  • Netherlands, RWS (fire test procedures for tunnels GT-98036-1a)
  • UK (BS 476: Parts 20 and 21: 1987 Appendix D and Euroclass A1 according to EN 1350-1)
  • USA (ASTM E119: 1998, UL 263 and UL 1709 - Design No. XR719)

Fire resistance test results relate solely to the constructions tested and test conditions imposed.

Material class (Euroclass A1 according to EN 1350-1)Non combustible
Smoke generationDoes not contribute to smoke generation
AlkalinitypH12.0~12.5
Thermal conductivity at 20°CW/m°K0.19
Theoretical coverage at 25mm thicknessm²/tonne65
CureBy hydraulic set
Initial set at 20°C and 50% RH2~6 hours
Densitykg/m³Minimum 775 ± 15% when dry and in place
Sound absorptionNRC0.35
Corrosion resistanceDoes not promote corrosion of steel. Please seek advice of structural engineer concerning long term corrosion protection, particularly when the structure is to be fully exposed to prevailing weather conditions.
Colour and texture conditionOff-white with a monolithic spray texture

View Complete Details

Yes, I am interested!

Fire Resistant Mortar
Interested in this product?
Get Best Quote

Fire Resistant Mortar

Get Latest Price

Fire Resistant Lightweight Cement Powder

PROMASEAL® Mortar is a lightweight, fire resistant, cement based product, supplied as a pre-mixed, grey powder to which water is added. It has been tested up to a 240 minute fire resistance with various penetration seals in concrete/masonry floors and walls (with an equal or greater fire resistance level).

ADVANTAGES
  • Clean and economical.
  • The mortar weighs approximately 700kg per m³ as compared to 2400kg of normal concrete and 1600-1800kg of lightweight concrete.
  • Quick setting time in a few hours depending on ambient weather conditions.
  • Easy to create new holes for installation of new penetrating services and equally easy to repair.
  • Does not shrink on drying.
  • Can be installed at the last minute before inspection time or after all services are installed.
  • Comparatively more versatile and flexible to install, and more compatible with other Promat fire stopping systems.

 

HANDLING
PackagingStorageShelf lifeEnvironmental
20kg bagsKept dry and off the ground until ready for useMaximum 10 months in original sealed containersDo not discharge into drains, watercourses or soil.

 

PROMASEAL® Mortar are manufactured under a quality management system certified in accordance with ISO 9001: 2008. The production unit has passed the site audit of ISO 14001 and all manufacturing processes are in accordance with the environmental standards of ISO 14001: 2004 and the safety standards of AS 4801: 2001

 

View Complete Details

Yes, I am interested!

PROMASEAL  FlexiWrap
Interested in this product?
Get Best Quote

PROMASEAL FlexiWrap

Get Latest Price

Fire Resistance Intumescent Wrap Forms

PROMASEAL® FlexiWrap is manufactured with Promat intumescent technology. It is designed to provide fire resistance where combustible insulation is used as thermal insulation around metal pipes.

PROMASEAL® FlexiWrap has been tested up to 240 minute fire resistance with copper pipes through concrete/masonry floors and walls or lightweight partitions (with an equal or greater fire resistance level) where they are generally combustible and potential for fire, hot gases and smoke to bypass the compartmentation. It is not applicable on plastic pipes.

View Complete Details

Yes, I am interested!

Fire Proof Grilles Air Transfer
  • Fire Proof Grilles Air Transfer
  • Fire Proof Grilles Air Transfer
  • Fire Proof Grilles Air Transfer
  • Fire Proof Grilles Air Transfer
Interested in this product?
Get Best Quote

Application: Fire doors and compartment walls
Fire Resistance Period: 30 to 60 minutes
Insulation/integrity: Integrity
Test Standard: BS 476: Part 22: 1987

MGM offers a comprehensive range of Fire Rated Air Transfer Grille Systems that are suitable for use in fire resisting doorsets and compartment walls for up to 60 minutes fire resistance.

In normal use, allows air to be circulated and moved throughout the building. During a fire the system is designed to close and provide a fire barrier to restrict the passage of hot gases.

MGM Fire Rated Air Transfer Grille Systems are tested for 30 and 60 minutes fire resistance. 

Guarantee

 

Providing the product is installed in accordance with the requirements of the guidance document the product is guaranteed for a period of 10 years.

Main Features

 

Grilles

  • Grilles are of a modular robust construction.
  • The frames are constructed from Zintec Mild Steel [0.65mm thick] with matching Zintec clips.
  • The system is easy to install and is maintenance free.
  • Intumescent material is totally unaffected by water, robust, ‘non-flaking’ and difficult to tear.

Faceplates

  • Faceplates are constructed from Zintec Mild Steel [1.0mm thick] and powder coated.
  • Faceplates are supplied with fixing screws.
  • Faceplates are available in a choice of two powder coated finishes – white and silver.

Product Range – Grilles
PART NODIMENSIONS [MM]FIRE RESISTANCEFREE AIR FLOW
ATG1500150 x 150 x 4030 and 60 mins153 sq. cms
ATG1503150 x 300 x 4030 and 60 mins307 sq. cms
ATG1300300 x 300 x 4030 and 60 mins614 sq. cms
ATG2251112 x 225 x 4030 and 60 mins161 sq. cms
ATG2250225 x 225 x 4030 and 60 mins323 sq. cms

View Complete Details

Yes, I am interested!

Fire Curtain A Lightweight, Flexible Fire Curtain
Interested in this product?
Get Best Quote

Fire Curtain

A lightweight, flexible fire curtain which provides

a barrier to smoke and flames

Description

FB805 consists of a specially coated glass fabric material. This is stretched

between perimeter fixings and staple jointed for maximum effectiveness. FB805 is

suitable for up to 30 minutes fire resistance.

Usages include: subdividing ceiling, subdividing roof and partitioning the void

below a raised floor.

Specification

Colour: White

Packaging: 1000 mm x 50 m Roll

Features & Benefits

• Tested in accordance with BS 476-Pt20

• Smoke and cavity fire barrier

• Approval with service penetrations

• Suitable for large openings

up to 10.8 m

• Dry installation

FB810

View Complete Details

Yes, I am interested!

Nullifire sc606 Intumescent Solvent Basecoat
Interested in this product?
Get Best Quote
S606 Intumescent Basecoat is a solvent-based, intumescent coating for fire protection of internal structural steelwork. S606 is very pale pink in colour. Can provide up to 120 minute fire protection in some applications Proven history of successful usage in projects all over the world Compatible with a full range of Nullifire primers and top seals providing an outstanding finish Suitable for on-site and off-site application

View Complete Details

Yes, I am interested!

Promaseal  IBS
Interested in this product?
Get Best Quote

Promaseal IBS

Get Latest Price

Fire Resistant Flexible Foam Strip

PROMASEAL® IBS™ is a fire resistant, flexible foam strip which, when placed in joints and around service penetrations in floors and walls, will maintain the fire resistance of the separating element. In most instances the addition of PROMASEAL®-A Acrylic Sealant is necessary. On some occasions a non fire resistant sealant can be applied.

PROMASEAL® IBS™ is a factory made product and can be easily verified as being installed in the correct manner.

PROMASEAL® IBS™ generally is used in lieu of a fire resistant sealant where the specifying authority or certifying body is concerned that the correct depths of sealant or the correct type sealant may not be applied by the contractor.

PROMASEAL® IBS™ accommodates movement in building services, e.g. the expansion or contraction of metal pipes, while maintaining the integrity of the penetration. It can be used for external wall joints in conjunction with an exterior grade sealant.

PROMASEAL® IBS™ is not designed for use in control joints that are designed to accommodate high or ongoing movement.

ADVANTAGES
  • Up to 4 hours fire resistance
  • Easy to use
  • Quick to install
  • Allow for pipe movement
  • Multi applications available
  • Coloured for ease of identification

 

DIMENSIONS
ConfigurationMaximum joint width (mm)Nominal dimension of IBS™ (mm)Minimum depth of non fire resistant sealant (mm)Maximum fire resistance
System to non fire exposed side only18
30
35
54
65
22
38
38
60
80
9 (optional)*
12 (optional)*
12
18
20
-/240/120
-/240/120
-/240/120
-/180/120
-/180/120
System to fire exposed side only18
18
35
54
65
22
22
38
60
80
9 (optional)**
12
12
18
20
-/240/240
-/240/240
-/240/240
-/240/240
-/240/240
System to mid depth of element18
30
50
22
38
60
Not required
Not required
5
-/240/120
-/180/90
-/240/120

* If sealant is not used in this application the fire resistance achieved will be -/180/90. For joints up to 30mm wide it is possible to install a 10mm thick PROMASEAL® IBS™ into the joint on the element’s side exposed to fire without a sealant coating.

** If sealant is not used in this application the fire resistance achieved will be -/240/180. For joints up to 30mm wide it is possible to install a 12mm thick PROMASEAL® IBS™ from the element’s side unexposed to fire without a sealant coating.

The non fire resistant sealant consists of acrylic, silicone or polyurethane based materials. To install PROMASEAL® IBS™, compress and insert into the joints. For gaps up to 30mm, it is possible to install the PROMASEAL® IBS™ in the centre of the depth/thickness of the floor or wall without a sealant fill. The fire reistance achieved depends on the existing fire resistance level of the building element in which the PROMASEAL® IBS™ is installed.

 

 

View Complete Details

Yes, I am interested!

PROMASTOP UniCollar
Interested in this product?
Get Best Quote

PROMASTOP UniCollar

Get Latest Price

Fire Resistant Collar for Plastic Pipes Penetration Seals

PROMASTOP® UniCollar® is an intumescent device designed to maintain the integrity of the fire resistant elements through which various plastic pipes pass. It is suitable for installation in various floors and walls similar to that in which it has been tested. In the event of a fire, the intumescent material in the PROMASTOP® UniCollar® rapidly expands, closing off the plastic pipe or combustible insulation and forming an insulating barrier.

PROMASTOP® UniCollar® is currently tested with many new and existing types of plastic using uPVC as a benchmark.

PROMASTOP® Unicollar® is packed in individual boxes each containing 2250mm length of collar (or 150 segments) and fixing accessories are included. The collar is designed so that it can be cut and snapped in modules of 15mm. For a guide to the approximate number of collar sizes per strip, please refer to the usage guide table.

ADVANTAGES
  • Size of opening
  • Flexibility of seal(s)
  • Ambient conditions
  • Frequecy of change to services
  • Penetration services
  • Smoke or gas lightness
  • Design life
  • Parent construction (type of substrate)

 

Applications
  • Penetration Seals

 

USAGE GUIDE
Inside diameter (I/D)mm4350556369758390110114125140160200
inches1.251.5-2-2.5-3-4-56-
Segments per collar
(UL listing if featured)
15171820
(19)
212224252930333640
(42)
49
Approximate number of collars per box108.587.576.566554.543.5
(3.75)
3
Number of brackets per collar for floor application22222333334555
Number of brackets per collar for wall application2*2*2*2*2*333333555

*Three brackets are recommended for framed walls if framing is not available to be fixed on.

PROMASTOP® UniCollar® are manufactured under a quality management system certified in accordance with ISO 9001: 2008. The production unit has passed the site audit of ISO 14001 and all manufacturing processes are in accordance with the environmental standards of ISO 14001: 2004 and the safety standards of AS 4801: 2001

 

View Complete Details

Yes, I am interested!

PROMASEAL Retrofit Collar (square base)
Interested in this product?
Get Best Quote
Fire Resistant Collar for Plastic Pipes Penetration Seals

Square based PROMASEAL® Retrofit Collar (FC type) is multi purpose collar designed for use with concrete slabs, masonry and lightweight walls and lined ceilings.

The split type collar can be retrofitted where necessary. It is available in a range of sizes to suit plastic pipes up to 318mm outside diameter.


Note that PROMASEAL® Retrofit Collars above 200mm have a circular base.

Applications
  • Penetration Seals

DIMENSION
Code no. FC 40FC 50FC 65FC 80FC 100FC 125FC 150FC 250FC 300
Pipe nominal diametermm40506580100125150250300
BodyHmm43434343536373120160
D1mm45587185112127162254318
D2mm7790103123150165200316402
FlangeD3mm112125138158185197235380 Ø466 Ø

 

Square based PROMASEAL® Retrofit Collars are manufactured under a quality management system certified in accordance with ISO 9001: 2008. The production unit has passed the site audit of ISO 14001 and all manufacturing processes are in accordance with the environmental standards of ISO 14001: 2004 and the safety standards of AS 4801: 2001

 

View Complete Details

Yes, I am interested!

PROMASEAL Grafitex
Interested in this product?
Get Best Quote

PROMASEAL Grafitex

Get Latest Price

Fire Resistant Intumescent Compound

PROMASEAL® Grafitex is an intumescent compound unaffected by water and moisture when cured. It is designed to expand and fill the gaps around the penetrating services when exposed to fire and any that may occur at where combustible type services melt or distort.

In general PROMASEAL® Grafitex is used in lieu of a fire resistant sealant where a penetrating service insulated by combustible materials or the service itself is combustible, e.g. uPVC conduits. It is not applicable for metal services or electrical cables. For these applications, please refer to PROMASEAL®-A Acrylic Sealant, PROMASEAL® IBS™ or PROMASEAL® Mortar

.PROMASEAL® Grafitex is not designed for use in gaps or joints where a high degree of thermal movement is expected.

ADVANTAGES
  • Up to 4 hours fire resistance
  • Simple installation
  • Water and moisture resistant
  • Suitable for use around conduits
  • Suitable for use around plasterboard, calcium silicate or masonry walls
  • Seals multi uPVC pipes in simple openings

View Complete Details

Yes, I am interested!
Tell us what you
need
Receive seller
details
Seal the deal
Pay with IndiaMART
Save time! Get Best Deal
I agree to the terms and privacy policy