Micro Tech Engineering

Microtech engineering Lobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, Pharmaceutical, and biotechnology. They are popular in these Diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (CIP/SIP) characteristics.These pumps offer a variety of lobe options including single, biwing, tri-lobe (shown), and multi-lobe.Rotary lobe pumps are Non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self- priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.
How Lobe Pumps WorkLiquid flows into the cavity and is trapped by the lobes as they rotate.
Lobe pumps are similar to external gear pumps in operation in that fluid flows around the interior of the casing. Unlike external gear pumps, however, the lobes do not make contact. Lobe contact is prevented by external timinggears located in the gearbox. Pump shaft support bearings are located in the gearbox, and since the bearings are out
of the pumped liquid, pressure is limited by bearing location and shaft deflection.
1. As the lobes come out of mesh, they create expanding volume on the inlet side of the
pump
2. Liquid travels around the interior of the casing in the pockets between the lobes and the casing it does not pass between the lobes.
3. Finally, the meshing of the lobes forces liquid through the outlet port under pressure.
Lobe pumps are frequently used in food applications because they handle solids without damaging the product. Particle size pumped can be much larger in lobe pumps than in other Positive Displacement Pump types. Since the lobes do not make contact, and clearances are not as close as in other Positive Displacement Pump, this design handles low viscosity liquids with diminished performance.
Advantages
· Pass medium solids
· No metal-to-metal contact
· Superior CIP/SIP capabilities
· Long term dry run (with lubrication to seals)
· Non-pulsating discharge
Disadvantages
· Requires timing gears
· Requires two seals
· Reduced lift with thin
Application
Alcohol - Apple purée – Apricots - Baby food – Batter – Beans – Beer Beetroot - Biscuit Cream – Blackcurrants – Brine –Broth -Butter fat Caramel - Castor Oil - Cat food - Cheese curd - Cheese whey – Cherries -Chicken paste - Chili con – Carne –Chocolate – Chutney Cockles - Coconut oil - Cod oil – Coffee –liquor – Cordials -Corn oil- Corn syrup – Cottage – cheese - Cotton seed – oil –Cranberry -- juice - Cream – Creamcheese – Custard - Dog food – Dough – Eggs – whole - Egg yolk – Essences – Evaporated –milk -Fish –Flavorings - Fondants-Fruit juice - Fruit pulp - Fruit – whole –Fruit -yogurt- Gelatin – Gherkins – Glucose – Glycerin – Gooseberries – Gravy -- - Hand cream – Honey – Horseradish - Ice cream –Icings - Iodine - ointment etc

Additional Information:

• Item Code: 565
• Production Capacity: 10 KG TO 2000 KG
• Delivery Time: 1 MONTH
• Packaging Details: WOODEN BOX

Lobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, Pharmaceutical, and biotechnology. They are popular in these Diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (CIP/SIP) characteristics.These pumps offer a variety of lobe options including single, biwing, tri-lobe (shown), and multi-lobe.Rotary lobe pumps are Non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self- priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.

Application

Alcohol - Apple purée – Apricots - Baby food – Batter – Beans – Beer Beetroot - Biscuit Cream – Blackcurrants – Brine –Broth -Butter fat Caramel - Castor Oil - Cat food - Cheese curd - Cheese whey – Cherries - Chicken paste - Chili con – Carne –Chocolate – Chutney – Cockles - Coconut oil - Cod oil – Coffee –liquor – Cordials -Corn oil
- Corn syrup – Cottage – cheese - Cotton seed – oil –Cranberry --

- \juice - Cream – Creamcheese – Custard - Dog food – Dough – Eggs – whole - Egg yolk – Essences – Evaporated –milk -Fish –Flavorings - Fondants-Fruit juice - Fruit pulp - Fruit – whole –Fruit -yogurt- Gelatin – Gherkins – Glucose – Glycerin – Gooseberries – Gravy -- - Hand cream – Honey – Horseradish - Ice cream –Icings - Iodine - ointment etc

Additional Information:

• Item Code: 309
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
• Production Capacity: 10 KG TO 2000 KG
• Delivery Time: 1 MONTH
• Packaging Details: WOODEN CHARGE

Horizontal Rotary Lobe Pump

Horizontal Rotary Lobe Pump

Lobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, Pharmaceutical, and biotechnology. They are popular in these Diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (CIP/SIP) characteristics.These pumps offer a variety of lobe options including single, biwing, tri-lobe (shown), and multi-lobe.Rotary lobe pumps are Non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self- priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.

Application

Alcohol - Apple purée – Apricots - Baby food – Batter – Beans – Beer Beetroot - Biscuit Cream – Blackcurrants – Brine –Broth -Butter fat Caramel - Castor Oil - Cat food - Cheese curd - Cheese whey – Cherries - Chicken paste - Chili con – Carne –Chocolate – Chutney – Cockles - Coconut oil - Cod oil – Coffee –liquor – Cordials -Corn oil
- Corn syrup – Cottage – cheese - Cotton seed – oil –Cranberry --

- \juice - Cream – Creamcheese – Custard - Dog food – Dough – Eggs – whole - Egg yolk – Essences – Evaporated –milk -Fish –Flavorings - Fondants-Fruit juice - Fruit pulp - Fruit – whole –Fruit -yogurt- Gelatin – Gherkins – Glucose – Glycerin – Gooseberries – Gravy -- - Hand cream – Honey – Horseradish - Ice cream –Icings - Iodine - ointment etc .

Additional Information:

• Item Code: 389
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
• Production Capacity: 10 KG TO 2000 KG
• Delivery Time: 1 MONTH
• Packaging Details: WOODEN BOX

lobe pump manufacturers in india

Microtech engineering Lobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, Pharmaceutical, and biotechnology. They are popular in these Diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (CIP/SIP) characteristics.These pumps offer a variety of lobe options including single, biwing, tri-lobe (shown), and multi-lobe.Rotary lobe pumps are Non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self- priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.

How Lobe Pumps Work Liquid flows into the cavity and is trapped by the lobes as they rotate.

Additional Information:

• Item Code: 418
• Production Capacity: 10 KG TO 2000 KG
• Delivery Time: 1 MONTH
• Packaging Details: WOODEN BOX

Microtech engineering Lobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, Pharmaceutical, and biotechnology. They are popular in these Diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (CIP/SIP) characteristics.These pumps offer a variety of lobe options including single, biwing, tri-lobe (shown), and multi-lobe.Rotary lobe pumps are Non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self- priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.

How Lobe Pumps Work Liquid flows into the cavity and is trapped by the lobes as they rotate.

Lobe pumps are similar to external gear pumps in operation in that fluid flows around the interior of the casing. Unlike external gear pumps, however, the lobes do not make contact. Lobe contact is prevented by external timinggears located in the gearbox. Pump shaft support bearings are located in the gearbox, and since the bearings are out

of the pumped liquid, pressure is limited by bearing location and shaft deflection.

1. As the lobes come out of mesh, they create expanding volume on the inlet side of the
pump

2. Liquid travels around the interior of the casing in the pockets between the lobes
and the casing it does not pass between the lobes.

3. Finally, the meshing of the lobes forces liquid through the outlet port under pressure.

Lobe pumps are frequently used in food applications because they handle solids
without damaging the product. Particle size pumped can be much larger in lobe pumps
than in other Positive Displacement Pump types. Since the lobes do not make contact,
and clearances are not as close as in other Positive Displacement Pump, this design
handles low viscosity liquids with diminished performance. Loading characteristics are
not as good as other designs, and suction ability is low. High-viscosity liquids require
reduced speeds to achieve satisfactory performance. Reductions of

25% of rated speed and lower are common with high-viscosity liquids.

Advantages

· Pass medium solids

· No metal-to-metal contact

· Superior CIP/SIP capabilities

· Long term dry run (with lubrication to seals)

· Non-pulsating discharge

Disadvantages

· Requires timing gears

· Requires two seals

· Reduced lift with thin

Application

Additional Information:

• Item Code: 148
• Production Capacity: 10 KG TO 2000 KG
• Delivery Time: 1 MONTH
• Packaging Details: WOODEN BOX

Additional Information:

• Item Code: 164
• Production Capacity: 10 KG TO 2000 KG
• Delivery Time: 1 MONTH
• Packaging Details: WOODEN BOX

Steam Jacketed Rotary Lobe Pump
Steam Jacketed Rotary Lobe Pump

Lobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, Pharmaceutical, and biotechnology. They are popular in these Diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (CIP/SIP) characteristics.These pumps offer a variety of lobe options including single, biwing, tri-lobe (shown), and multi-lobe.Rotary lobe pumps are Non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self- priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.

pplication
Alcohol - Apple purée – Apricots - Baby food – Batter – Beans – Beer Beetroot - Biscuit Cream – Blackcurrants – Brine –Broth -Butter fat Caramel - Castor Oil - Cat food - Cheese curd - Cheese whey – Cherries - Chicken paste - Chili con – Carne –Chocolate – Chutney – Cockles - Coconut oil - Cod oil – Coffee –liquor – Cordials -Corn oil

- Corn syrup – Cottage – cheese - Cotton seed – oil –Cranberry --- juice - Cream – Creamcheese – Custard - Dog food – Dough – Eggs – whole - Egg yolk – Essences – Evaporated –milk -Fish –- Iodine - ointment etc

LOBE PUMP

Additional Information:

• Item Code: MESJLP
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
• Production Capacity: 10 KG TO 2000 KG
• Delivery Time: 1 MONTH
• Packaging Details: WOODEN BOX

Industrial Rotary Lobe Pump

Industrial Rotary Lobe Pump 
Microtech engineeringLobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, Pharmaceutical, and biotechnology. They are popular in these Diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (CIP/SIP) characteristics.These pumps offer a variety of lobe options including single, biwing, tri-lobe (shown), and multi-lobe.Rotary lobe pumps are Non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self- priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.
Industrial Rotary Lobe Pump

Additional Information:

• Item Code: 310
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
• Production Capacity: 100
• Delivery Time: 1 MONTH
• Packaging Details: WOODEN BOX

SS LOBE PUMP MANUFACTURER IN INDIA
Microtech engineering Lobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, Pharmaceutical, and biotechnology. They are popular in these Diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (CIP/SIP) characteristics.These pumps offer a variety of lobe options including single, biwing, tri-lobe (shown), and multi-lobe.Rotary lobe pumps are Non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self- priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.

MICROTECH ENGINERING Lobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, Pharmaceutical, and biotechnology. They are popular in these Diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (CIP/SIP) characteristics.These pumps offer a variety of lobe options including single, biwing, tri-lobe (shown), and multi-lobe.Rotary lobe pumps are Non-contacting andhave large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self- priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.
 
How Lobe Pumps Work Liquid flows into the cavity and is trapped by the lobes as they rotate.
Lobe pumps are similar to external gear pumps in operation in that fluid flows around the interior of the casing. Unlike external gear pumps, however, the lobes do not make contact. Lobe contact is prevented by external timinggears located in the gearbox. Pump shaft support bearings are located in the gearbox, and since the bearings are out
of the pumped liquid, pressure is limited by bearing location and shaft deflection.
 
 
Application
Alcohol - Apple purée – Apricots - Baby food – Batter – Beans – Beer Beetroot - Biscuit Cream – Blackcurrants – Brine –Broth -Butter fat Caramel - Castor Oil - Cat food - Cheese curd - Cheese whey – Cherries - Chicken paste - Chili con – Carne –Chocolate – Chutney – Cockles - Coconut oil - Cod oil – Coffee –liquor – Cordials -Corn oil
- Corn syrup – Cottage – cheese - Cotton seed – oil –Cranberry --
- juice - Cream – Creamcheese – Custard - Dog food – Dough – Eggs – whole - Egg yolk – Essences – Evaporated –milk -Fish –- Iodine - ointment etc

Additional Information:

• Item Code: 319
• Production Capacity: 10 KG TO 2000 KG
• Delivery Time: 1 MONTH
• Packaging Details: WOODEN BOX

lobe pump manufacturers in delhi

Additional Information:

• Item Code: 167
• Production Capacity: 10 KG TO 2000 KG
• Delivery Time: 1 MONTH
• Packaging Details: WOODEN CHARGE

Additional Information:

• Item Code: 277
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
• Production Capacity: 10 KG TO 2000 KG
• Delivery Time: 1 MONTH
• Packaging Details: WOODEN CHARGE

Thick Liquid Transfer Pump
Lobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, Pharmaceutical, and biotechnology. They are popular in these Diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (CIP/SIP) characteristics.These pumps offer a variety of lobe options including single, biwing, tri-lobe (shown), and multi-lobe.Rotary lobe pumps are Non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self- priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.
Application
Alcohol - Apple purée – Apricots - Baby food – Batter – Beans – Beer Beetroot - Biscuit Cream – Blackcurrants – Brine –Broth -Butter fat Caramel - Castor Oil - Cat food - Cheese curd - Cheese whey – Cherries - Chicken paste - Chili con – Carne –Chocolate – Chutney – Cockles - Coconut oil - Cod oil – Coffee –liquor – Cordials -Corn oil
- Corn syrup – Cottage – cheese - Cotton seed – oil –Cranberry --
- \juice - Cream – Creamcheese – Custard - Dog food – Dough – Eggs – whole - Egg yolk – Essences – Evaporated –milk -Fish –Flavorings - Fondants-Fruit juice - Fruit pulp - Fruit – whole –Fruit -yogurt- Gelatin – Gherkins – Glucose – Glycerin – Gooseberries – Gravy -- - Hand cream – Honey – Horseradish - Ice cream –Icings - Iodine - ointment etc

Additional Information:

• Item Code: 143
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
• Production Capacity: 10 KG TO 2000 KG
• Delivery Time: 1 MONTH
• Packaging Details: WOODEN CHARGE

Microtech engineering Lobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, Pharmaceutical, and biotechnology. They are popular in these Diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (CIP/SIP) characteristics.These pumps offer a variety of lobe options including single, biwing, tri-lobe (shown), and multi-lobe.Rotary lobe pumps are Non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self- priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.
How Lobe Pumps Work Liquid flows into the cavity and is trapped by the lobes as they rotate.Lobe pumps are similar to external gear pumps in operation in that fluid flows around the interior of the casing. Unlike external gear pumps, however, the lobes do not make contact. Lobe contact is prevented by external timing gears located in the gearbox. Pump shaft support bearings are located in the gearbox, and since the bearings are out of the pumped liquid, pressure is limited by bearing location and shaft deflection.
1. As the lobes come out of mesh, they create expanding volume on the inlet side of the
pump
2. Liquid travels around the interior of the casing in the pockets between the lobes
and the casing it does not pass between the lobes.
3. Finally, the meshing of the lobes forces liquid through the outlet port under pressure.Lobe pumps are frequently used in food applications because they handle solids
without damaging the product. Particle size pumped can be much larger in lobe pumps
than in other Positive Displacement Pump types. Since the lobes do not make contact,
and clearances are not as close as in other Positive Displacement Pump, this design
handles low viscosity liquids with diminished performance. Loading characteristics are
not as good as other designs, and suction ability is low. High-viscosity liquids require
reduced speeds to achieve satisfactory performance. Reductions of 25% of rated speed and lower are common with high-viscosity liquids.
Application
Alcohol - Apple purée – Apricots - Baby food – Batter – Beans – Beer Beetroot - Biscuit Cream – Blackcurrants – Brine –Broth -Butter fat Caramel - Castor Oil - Cat food - Cheese curd - Cheese whey – Cherries - Chicken paste - Chili con – Carne –Chocolate – Chutney – Cockles - Coconut oil - Cod oil – Coffee –liquor – Cordials -Corn oil
- Corn syrup – Cottage – cheese - Cotton seed – oil –Cranberry --
- \juice - Cream – Creamcheese – Custard - Dog food – Dough – Eggs – whole - Egg yolk – Essences – Evaporated –milk -Fish –Flavorings - Fondants-Fruit juice - Fruit pulp - Fruit – whole –Fruit -yogurt- Gelatin – Gherkins – Glucose – Glycerin – Gooseberries – Gravy -- - Hand cream – Honey – Horseradish - Ice cream –Icings - Iodine - ointment etc

Additional Information:

• Item Code: 262
• Production Capacity: 10 KG TO 2000 KG
• Delivery Time: 1 MONTH
• Packaging Details: WOODEN BOX

Microtech engineering Lobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, Pharmaceutical, and biotechnology. They are popular in these Diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (CIP/SIP) characteristics.These pumps offer a variety of lobe options including single, biwing, tri-lobe (shown), and multi-lobe.Rotary lobe pumps are Non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self- priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.
How Lobe Pumps Work Liquid flows into the cavity and is trapped by the lobes as they rotate.
Lobe pumps are similar to external gear pumps in operation in that fluid flows around the interior of the casing. Unlike external gear pumps, however, the lobes do not make contact. Lobe contact is prevented by external timinggears located in the gearbox. Pump shaft support bearings are located in the gearbox, and since the bearings are out
of the pumped liquid, pressure is limited by bearing location and shaft deflection.
1. As the lobes come out of mesh, they create expanding volume on the inlet side of the
pump
2. Liquid travels around the interior of the casing in the pockets between the lobes
and the casing it does not pass between the lobes.
3. Finally, the meshing of the lobes forces liquid through the outlet port under pressure.
Lobe pumps are frequently used in food applications because they handle solids
without damaging the product. Particle size pumped can be much larger in lobe pumps
than in other Positive Displacement Pump types. Since the lobes do not make contact,
and clearances are not as close as in other Positive Displacement Pump, this design
handles low viscosity liquids with diminished performance. Loading characteristics are
not as good as other designs, and suction ability is low. High-viscosity liquids require
reduced speeds to achieve satisfactory performance. Reductions of
25% of rated speed and lower are common with high-viscosity liquids.
Advantages
· Pass medium solids
· No metal-to-metal contact
· Superior CIP/SIP capabilities
· Long term dry run (with lubrication to seals)
· Non-pulsating discharge
Disadvantages
· Requires timing gears
· Requires two seals
· Reduced lift with thin
Application
Alcohol - Apple purée – Apricots - Baby food – Batter – Beans – Beer Beetroot - Biscuit Cream – Blackcurrants – Brine –Broth -Butter fat Caramel - Castor Oil - Cat food - Cheese curd - Cheese whey – Cherries - Chicken paste - Chili con – Carne –Chocolate – Chutney – Cockles - Coconut oil - Cod oil – Coffee –liquor – Cordials -Corn oil
- Corn syrup – Cottage – cheese - Cotton seed – oil –Cranberry --
- juice - Cream – Creamcheese – Custard - Dog food – Dough – Eggs – whole - Egg yolk – Essences – Evaporated –milk -Fish –- Iodine - ointment etc.

Additional Information:

• Item Code: 261
• Production Capacity: 10 KG TO 2000 KG
• Delivery Time: 1 MONTH
• Packaging Details: WOODEN BOX

Microtech engineering Lobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, Pharmaceutical, and biotechnology. They are popular in these Diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (CIP/SIP) characteristics.These pumps offer a variety of lobe options including single, biwing, tri-lobe (shown), and multi-lobe.Rotary lobe pumps are Non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self- priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.

How Lobe Pumps Work Liquid flows into the cavity and is trapped by the lobes as they rotate.

Lobe pumps are similar to external gear pumps in operation in that fluid flows around the interior of the casing. Unlike external gear pumps, however, the lobes do not make contact. Lobe contact is prevented by external timinggears located in the gearbox. Pump shaft support bearings are located in the gearbox, and since the bearings are out

of the pumped liquid, pressure is limited by bearing location and shaft deflection.

1. As the lobes come out of mesh, they create expanding volume on the inlet side of the
pump

2. Liquid travels around the interior of the casing in the pockets between the lobes
and the casing it does not pass between the lobes.

3. Finally, the meshing of the lobes forces liquid through the outlet port under pressure.

Lobe pumps are frequently used in food applications because they handle solids
without damaging the product. Particle size pumped can be much larger in lobe pumps
than in other Positive Displacement Pump types. Since the lobes do not make contact,
and clearances are not as close as in other Positive Displacement Pump, this design
handles low viscosity liquids with diminished performance. Loading characteristics are
not as good as other designs, and suction ability is low. High-viscosity liquids require
reduced speeds to achieve satisfactory performance. Reductions of

25% of rated speed and lower are common with high-viscosity liquids.

Advantages

· Pass medium solids

· No metal-to-metal contact

· Superior CIP/SIP capabilities

· Long term dry run (with lubrication to seals)

· Non-pulsating discharge

Disadvantages

· Requires timing gears

· Requires two seals

· Reduced lift with thin

Application

Alcohol - Apple purée – Apricots - Baby food – Batter – Beans – Beer Beetroot - Biscuit Cream – Blackcurrants – Brine –Broth -Butter fat Caramel - Castor Oil - Cat food - Cheese curd - Cheese whey – Cherries - Chicken paste - Chili con – Carne –Chocolate – Chutney – Cockles - Coconut oil - Cod oil – Coffee –liquor – Cordials -Corn oil
- Corn syrup – Cottage – cheese - Cotton seed – oil –Cranberry --

- juice - Cream – Creamcheese – Custard - Dog food – Dough – Eggs – whole - Egg yolk – Essences – Evaporated –milk -Fish –- Iodine - ointment etc

Additional Information:

• Item Code: 294
• Production Capacity: 10 KG TO 2000 KG
• Delivery Time: 1 MONTH
• Packaging Details: WOODEN BOX

High Viscosity paste transfer pump
Lobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, Pharmaceutical, and biotechnology. They are popular in these Diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (CIP/SIP) characteristics.These pumps offer a variety of lobe options including single, biwing, tri-lobe (shown), and multi-lobe.Rotary lobe pumps are Non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self- priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.
rotary lobe pump

Additional Information:

• Item Code: 298
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
• Production Capacity: 10 KG TO 2000 KG
• Delivery Time: 1 MONTH
• Packaging Details: WOODEN BOX

Microtech engineering Lobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, Pharmaceutical, and biotechnology. They are popular in these Diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (CIP/SIP) characteristics.These pumps offer a variety of lobe options including single, biwing, tri-lobe (shown), and multi-lobe.Rotary lobe pumps are Non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self- priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.
How Lobe Pumps Work Liquid flows into the cavity and is trapped by the lobes as they rotate.Lobe pumps are similar to external gear pumps in operation in that fluid flows around the interior of the casing. Unlike external gear pumps, however, the lobes do not make contact. Lobe contact is prevented by external timing gears located in the gearbox. Pump shaft support bearings are located in the gearbox, and since the bearings are out of the pumped liquid, pressure is limited by bearing location and shaft deflection.
1. As the lobes come out of mesh, they create expanding volume on the inlet side of the
pump
2. Liquid travels around the interior of the casing in the pockets between the lobes
and the casing it does not pass between the lobes.
3. Finally, the meshing of the lobes forces liquid through the outlet port under pressure.Lobe pumps are frequently used in food applications because they handle solids
without damaging the product. Particle size pumped can be much larger in lobe pumps
than in other Positive Displacement Pump types. Since the lobes do not make contact,
and clearances are not as close as in other Positive Displacement Pump, this design
handles low viscosity liquids with diminished performance. Loading characteristics are
not as good as other designs, and suction ability is low. High-viscosity liquids require
reduced speeds to achieve satisfactory performance. Reductions of 25% of rated speed and lower are common with high-viscosity liquids.
Application
Alcohol - Apple purée – Apricots - Baby food – Batter – Beans – Beer Beetroot - Biscuit Cream – Blackcurrants – Brine –Broth -Butter fat Caramel - Castor Oil - Cat food - Cheese curd - Cheese whey – Cherries - Chicken paste - Chili con – Carne –Chocolate – Chutney – Cockles - Coconut oil - Cod oil – Coffee –liquor – Cordials -Corn oil
- Corn syrup – Cottage – cheese - Cotton seed – oil –Cranberry --
- \juice - Cream – Creamcheese – Custard - Dog food – Dough – Eggs – whole - Egg yolk – Essences – Evaporated –milk -Fish –Flavorings - Fondants-Fruit juice - Fruit pulp - Fruit – whole –Fruit -yogurt- Gelatin – Gherkins – Glucose – Glycerin – Gooseberries – Gravy -- - Hand cream – Honey – Horseradish - Ice cream –Icings - Iodine - ointment etc

Additional Information:

• Item Code: MEBLP
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A,Other
• Production Capacity: 200
• Delivery Time: 1 MONTH
• Packaging Details: WOODEN BOX