Micro Teknik

Laminar Air Flow Cabinets works on laminar flow principle involves double filtration of air through coarse Pre Filters (upto “5” microns) and HEPA filters (down to”0.3″microns) for filtration of Biological & Particulate contaminants. A constant uni-directional air flows either Horizontally or Vertically, is drawn from atmosphere and passed through pre and HEPA filters on to the work surface. Fabricated out of reinforced pest and weather resistant Duro-board which is clad in from outside in laminated sheet and inner exposed areas are finished in Epoxy paint. Table top stainless steel sheet. Side panels are fixed and made of clear plexiglass. Front door is folding & made of clear plexiglass.

Prefilters:-
DOP tested as per Standard BS:”2831″with efficiency”90%”down to”5microns. Made of Washable synthetic material.

HEPA Filters:-
Made of Microglass fibre with corrugated aluminium foil separators. DOP tested as per US
Standard”209B.”Efficiency”99.97%”down to 0.3″microns.

Blower Units:-
Assembly of AU or equivalent motor workable on”220V”AC”50Hzsingle phase, dynamically
balanced blowers making the unit least vibrant with minimum noise level.

Features:-

• Lighting”: Fluorescent tube lights
• Sterilization”: Germicidal Ultra Violet (UV) tube
• Manometer”: Static pressure thick Acrylic block type

Available in following sizes :-
Working Chamber: 2 x 2 x 2′
Working Chamber: 3 x 2 x 2′
Working Chamber: 4 x 2 x 2′
Working Chamber: 6 x 2 x 2′
Working Chamber: 8 x 2 x 2′

Additional Information:

• Item Code: JCA-07A
• Production Capacity: 100
• Delivery Time: 7 DAYS
• Packaging Details: ALSO AVAILABLE IN EXPORT QUALITY PACKING

Item code: JCA-07D 

Laminar Air Flow Cabinet

Micro-Controller based :Menu Controlled with LCD Display.

Operation Laminar Airflow Velocity :
Average of 0.45 m/s or 90 fpm measured 150mm/6” filter face for 45 air changes/min. in work zone.
Re-circulation : 70% of total.Air Velocity Exhaust : 30% of total Air Velocity.
Air Cleanliness in Working Area : meets or exceeds US Federal Standard 209E Class 100.
Main & Exhaust Filters : HEPA (Minipleat Optional).
HEPA Filters : Rated for min. 99.97% efficiency at 0.3 micron
particle size.
Pre-Filters : Low pressure drop. High efficiency, 10 microns.
UV Sterilization : In work chamber & Exhaust Plenum.
Emission in the germicidal band UV-Cm 254mm.
Alarm : Door unsafe position.
Noise Level : <58 dbA at operator point.
Power : 220-240V AC / 50 Hz 1 Ph.
Inter Lock : UV / Fluorescent / Door.
Exhaust : Double protection with HEPA & UV.
Motors / Blowers : Double shaft, Balanced, low vibration.

Additional Information:

• Item Code: JCA-7D
• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: 120
• Packaging Details: AVAILABLE IN EXPORT LEVEL PACKING

• Chamber : 3x2x2' 
• Chamber : 4x2x2'
• Chamber : 6x2x2'
• Chamber : 8x3x3'

Additional Information:

• Item Code: JCA-05
• Production Capacity: 120
• Delivery Time: 12 DAYS
• Packaging Details: AVAILABLE IN EXPORT PACKING

Item code: JCA-07 

Laminar Air Flow Cabinets works on laminar flow principle involves double filtration of air through coarse Pre Filters (upto 5 microns) and Hepa filters (down to 0.3 microns) for filtration of Biological & Particulate contaminants. A constant uni-directional air flows either Horizontally or Vertically, is drawn from atmosphere and passed through pre and Hepa filters on to the work surface. Fabricated out of reinforced pest and weather resistant Duro-board which is clad in from outside in laminated sheet and inner exposed areas are finished in Epoxy paint. Table top stainless steel sheet. Side panels are fixed and made of clear plexiglass. Front door is folding & made of clear plexiglass.

Pre filters:-
DOP tested as per Standard BS: 2831 with efficiency 90% down to 5 microns. Made of Washable synthetic material.
Hepa Filters:-
Made of Microglass fibre with corrugated aluminium foil separators. DOP tested as per US Standard 209B. Efficiency 99.97% down to 0.3 microns.

Blower Units:-
Assembly of AU or equivalent motor workable on 220V AC 50Hz single phase, dynamically balanced blowers making the unit least vibrant with minimum noise level.

Features:-

• Lighting : Fluorescent tube lights
• Sterilization : Germicidal Ultra Violet (UV) tube
• Manometer : Static pressure thick Acrylic block type

Available in following sizes :-
Working Chamber: 2 x 2 x 2′
Working Chamber: 3 x 2 x 2′
Working Chamber: 4 x 2 x 2′
Working Chamber: 6 x 2 x 2′
Working Chamber: 8 x 2 x 2′

Optional K-System:-
The K-System encompasses the specialist requirement of ocyte, sperm and embryo handling during procedures in both animal and human reproduction. The K-system is often built into a Laminar Flow Cabinet. The utensils are warmed by the heating of part of the table plate of the cabinet.
The transmitted light source and the regulation transformer for the stereo microscope are located under the stainless steel table plate, with a window for transmitted light built into the table plate.

Additional Information:

• Item Code: JCA-07
• Production Capacity: 150
• Delivery Time: 1-2 WEEKS
• Packaging Details: BOX OR CARTON

Bio Safe Biological Safety Cabinet : These Class I safety cabinet provide protection for the operator and the environment, with inward airflow away from the operator. Air is filtered before release to the atmosphere.
Negative pressure is maintained within the cabinet, which is suitable for work where no product protection is required. These cabinets are self contained 100% exhaust containment enclosures. Air from the work zone passes through a two-stage, high efficiency filter system before being exhausted to the room/atmosphere. These cabinets may be installed on standard laboratory benches or on optional support stands.
Personnel and environment protection is provided by inward flow of room air at the work area and high-efficiency particulate air (HEPA) filtration of exhaust air. The inward airflow sweeps aerosols generated during the work process away from the operator into the filter system. A prefilter protects the HEPA filter from large particles, and the HEPA filter removes particulate contaminates down to sub-micron size from the exhaust air.
Supplied complete as above, with cord and plug, suitable to work on 220V single phase, 50Hz, AC supply.
Unique Features :

• Re-Circulation of Air – offering highest level of cleanliness.
• Sliding Sash – renders unit convertible for use as a conventional vertical laminar down flow clean air work station.
• Filtered Exhaust – protects ambient environment, and avoids build up, air borne particles.
• Supplementary Air Barrier – prevents contamination through make up air.
• Glove Ports and Gauntlets – permits working with medium to low-risk organisms,
• pathogenic cultures.
• Built in “U.V. Germicidal light – facilitates sterilization of working area before and after use.

Available in following sizes :-

• Work area
• 3′ x 2′ x 2′
• 4′ x 2′ x 2′
• 6’ x 2′ x 2′

Additional Information:

• Item Code: JCA-021
• Production Capacity: 80
• Delivery Time: 12 DAYS
• Packaging Details: AVAILABLE IN EXPORT LEVEL PACKAGING

Item code: JCA-031

Garment Storage Cabinet is a self standing providing down flow clean air to clean room Garments. Recommended in change rooms. Suitable for Pharmaceutical, Hospital and O/T, Electronic Industry etc. Supplied complete with Hepa & Pre filter, Motor Blower. Static Pressure Manometer & Built in U.V. Germicidal Light.

Technical Specifications:-

Note: Supplied with Pre filters.

Additional Information:

• Item Code: JCA-031

Item code: JCA-041

Sterile Material Storage Cabinet (Vertical Flow) is a self standing, down flow clean air cabinet for use in clean rooms for storage of materials. Suitable for Pharmaceuticals, Hospitals and O/T, Electronic Industry etc. Supplied complete with HEPA & Pre-filter, Motor Blower, Shelves. Static Pressure Manometer & Built in U.V. Germicidal Light.

Technical Specifications:

Additional Information:

• Item Code: JCA-041

JCA-05

·         Working: Manual and Automatic

·         Material: SS and MS

·         Application: Chemical Fumes

·         Use: Laboratory

·         Frequency (Hz): 50 Hz

·         Voltage (V): 240 V

·         Shape: Rectangular

·         Color: White

CODE: JCA-07    Laminar Air Flow Cabinets works on laminar flow principle involves double filtration of air through coarse Pre Filters (upto 5 microns) and Hepa filters (down to 0.3 microns) for filtration of Biological & Particulate contaminants. A constant uni-directional air flows either horizontally or vertically, is drawn from atmosphere or passed through pre and Hepa filters on to the work surface. Fabricated out of reinforced pest and weather resistant Duro-board which is clad in from outside in laminated sheet and inner exposed areas are finished in Epoxy paint. Table top stainless steel sheet & MS. Side panels are fixed and made of clear Plexiglas’s. Front door is folding & made of clear Plexiglas’s.

Pre filters:-

·         DOP tested as per Standard BS: 2831 with efficiency 90% down to 5 microns. Made of Washable synthetic material.

Hepa Filters:-

·         Made of Micro glass fibre with corrugated aluminium foil separators. DOP tested as per US Standard 209B. Efficiency 99.97% down to 0.3 microns.

Blower Units:-

·         Assembly of AU or equivalent motor workable on 220V AC 50Hz single phase, dynamically balanced blowers making the unit least vibrant with minimum noise level.

Features:-

·         Lighting : Fluorescent tube lights

·         Sterilization : Germicidal Ultra Violet (UV) tube

·         Manometer : Static pressure thick Acrylic block type

Item code: JCA-021B

Salient features:

·         These Class II safety cabinet provide protection for the operator and the environment, with inward airflow away from the operator. Air is filtered before release to the atmosphere.

·         Negative pressure is maintained within the cabinet, which is suitable for work where no product protection is required.

·         These cabinets are self-contained 100% exhaust containment enclosures. Air from the work zone passes through a two-stage, high efficiency filter system before being exhausted to the room/atmosphere. These cabinets may be installed on standard laboratory benches or on optional support stands.

·         Personnel and environment protection is provided by inward flow of room air at the work area and high-efficiency particulate air (HEPA) filtration of exhaust air. The inward airflow sweeps aerosols generated during the work process away from the operator into the filter system. A pre-filter protects the HEPA filter from large particles, and the HEPA filter removes particulate contaminates down to sub-micron size from the exhaust air.

·         Supplied complete as above, with cord and plug, suitable to work on 220V single phase, 50Hz, AC supply.

·         Material – SS, MS

CODE: JCA-07  Laminar Air Flow Cabinets works on laminar flow principle involves double filtration of air through coarse Pre Filters (upto 5 microns) and Hepa filters (down to 0.3 microns) for filtration of Biological & Particulate contaminants. A constant uni-directional air flows either horizontally or vertically, is drawn from atmosphere or passed through pre and Hepa filters on to the work surface. Fabricated out of reinforced pest and weather resistant Duro-board which is clad in from outside in laminated sheet and inner exposed areas are finished in Epoxy paint. Table top stainless steel sheet & MS. Side panels are fixed and made of clear Plexiglas’s. Front door is folding & made of clear Plexiglas’s.

Pre filters:-

·         DOP tested as per Standard BS: 2831 with efficiency 90% down to 5 microns. Made of Washable synthetic material.

Hepa Filters:-

·         Made of Micro glass fibre with corrugated aluminium foil separators. DOP tested as per US Standard 209B. Efficiency 99.97% down to 0.3 microns.

Blower Units:-

·         Assembly of AU or equivalent motor workable on 220V AC 50Hz single phase, dynamically balanced blowers making the unit least vibrant with minimum noise level.

Features:-

·         Lighting : Fluorescent tube lights

·         Sterilization : Germicidal Ultra Violet (UV) tube

·         Manometer : Static pressure thick Acrylic block type

Item code: JCA-031

·         Garment Storage Cabinet is a self-standing providing down flow clean air to clean room Garments. Recommended in change rooms. Suitable for Pharmaceutical, Hospital and O/T, Electronic Industry etc. Supplied complete with Hepa & Pre filter, Motor Blower. Static Pressure Manometer & Built in U.V. Germicidal Light.

Technical Specifications:-

·         Model                         3                                  4

·         Size of Hepa Filter       3’ x 1.5’ x 6′                 4’x 1.5’x 6′

·         No. of Hepa Filter       1                                  1

·         No. of Shelves             2                                  2

·         Other sizes can be fabricated

·         Material: SS & MS     

Item code: JCA-031

·         Garment Storage Cabinet is a self-standing providing down flow clean air to clean room Garments. Recommended in change rooms. Suitable for Pharmaceutical, Hospital and O/T, Electronic Industry etc. Supplied complete with Hepa & Pre filter, Motor Blower. Static Pressure Manometer & Built in U.V. Germicidal Light.

Technical Specifications:-

·         Model                         3                                  4

·         Size of Hepa Filter       3’ x 1.5’ x 6′                 4’x 1.5’x 6′

·         No. of Hepa Filter       1                                  1

·         No. of Shelves             2                                  2

·         Other sizes can be fabricated

·         Material: SS & MS     

Item code: JCA-031

·         Garment Storage Cabinet is a self-standing providing down flow clean air to clean room Garments. Recommended in change rooms. Suitable for Pharmaceutical, Hospital and O/T, Electronic Industry etc. Supplied complete with Hepa & Pre filter, Motor Blower. Static Pressure Manometer & Built in U.V. Germicidal Light.

Technical Specifications:-

·         Model                         3                                  4

·         Size of Hepa Filter       3’ x 1.5’ x 6′                 4’x 1.5’x 6′

·         No. of Hepa Filter       1                                  1

·         No. of Shelves             2                                  2

·         Other sizes can be fabricated

·         Material: SS & MS     

Item code: JCA-031

·         Garment Storage Cabinet is a self-standing providing down flow clean air to clean room Garments. Recommended in change rooms. Suitable for Pharmaceutical, Hospital and O/T, Electronic Industry etc. Supplied complete with Hepa & Pre filter, Motor Blower. Static Pressure Manometer & Built in U.V. Germicidal Light.

Technical Specifications:-

·         Model                         3                                  4

·         Size of Hepa Filter       3’ x 1.5’ x 6′                 4’x 1.5’x 6′

·         No. of Hepa Filter       1                                  1

·         No. of Shelves             2                                  2

·         Other sizes can be fabricated

·         Material: SS & MS     

Item code: JCA-021B

Salient features:

·         These Class II safety cabinet provide protection for the operator and the environment, with inward airflow away from the operator. Air is filtered before release to the atmosphere.

·         Negative pressure is maintained within the cabinet, which is suitable for work where no product protection is required.

·         These cabinets are self-contained 100% exhaust containment enclosures. Air from the work zone passes through a two-stage, high efficiency filter system before being exhausted to the room/atmosphere. These cabinets may be installed on standard laboratory benches or on optional support stands.

·         Personnel and environment protection is provided by inward flow of room air at the work area and high-efficiency particulate air (HEPA) filtration of exhaust air. The inward airflow sweeps aerosols generated during the work process away from the operator into the filter system. A pre-filter protects the HEPA filter from large particles, and the HEPA filter removes particulate contaminates down to sub-micron size from the exhaust air.

·         Supplied complete as above, with cord and plug, suitable to work on 220V single phase, 50Hz, AC supply.

·         Material – SS, MS

Item code: JCA-021B

Salient features:

·         These Class II safety cabinet provide protection for the operator and the environment, with inward airflow away from the operator. Air is filtered before release to the atmosphere.

·         Negative pressure is maintained within the cabinet, which is suitable for work where no product protection is required.

·         These cabinets are self-contained 100% exhaust containment enclosures. Air from the work zone passes through a two-stage, high efficiency filter system before being exhausted to the room/atmosphere. These cabinets may be installed on standard laboratory benches or on optional support stands.

·         Personnel and environment protection is provided by inward flow of room air at the work area and high-efficiency particulate air (HEPA) filtration of exhaust air. The inward airflow sweeps aerosols generated during the work process away from the operator into the filter system. A pre-filter protects the HEPA filter from large particles, and the HEPA filter removes particulate contaminates down to sub-micron size from the exhaust air.

·         Supplied complete as above, with cord and plug, suitable to work on 220V single phase, 50Hz, AC supply.

·         Material – SS, MS

Item code: JCA-021B

Salient features:

·         These Class II safety cabinet provide protection for the operator and the environment, with inward airflow away from the operator. Air is filtered before release to the atmosphere.

·         Negative pressure is maintained within the cabinet, which is suitable for work where no product protection is required.

·         These cabinets are self-contained 100% exhaust containment enclosures. Air from the work zone passes through a two-stage, high efficiency filter system before being exhausted to the room/atmosphere. These cabinets may be installed on standard laboratory benches or on optional support stands.

·         Personnel and environment protection is provided by inward flow of room air at the work area and high-efficiency particulate air (HEPA) filtration of exhaust air. The inward airflow sweeps aerosols generated during the work process away from the operator into the filter system. A pre-filter protects the HEPA filter from large particles, and the HEPA filter removes particulate contaminates down to sub-micron size from the exhaust air.

·         Supplied complete as above, with cord and plug, suitable to work on 220V single phase, 50Hz, AC supply.

Item code: JCA-021B

Salient features:

·         These Class II safety cabinet provide protection for the operator and the environment, with inward airflow away from the operator. Air is filtered before release to the atmosphere.

·         Negative pressure is maintained within the cabinet, which is suitable for work where no product protection is required.

·         These cabinets are self-contained 100% exhaust containment enclosures. Air from the work zone passes through a two-stage, high efficiency filter system before being exhausted to the room/atmosphere. These cabinets may be installed on standard laboratory benches or on optional support stands.

·         Personnel and environment protection is provided by inward flow of room air at the work area and high-efficiency particulate air (HEPA) filtration of exhaust air. The inward airflow sweeps aerosols generated during the work process away from the operator into the filter system. A pre-filter protects the HEPA filter from large particles, and the HEPA filter removes particulate contaminates down to sub-micron size from the exhaust air.

·         Supplied complete as above, with cord and plug, suitable to work on 220V single phase, 50Hz, AC supply.

Item code: JCA-021B

Salient features:

·         These Class II safety cabinet provide protection for the operator and the environment, with inward airflow away from the operator. Air is filtered before release to the atmosphere.

·         Negative pressure is maintained within the cabinet, which is suitable for work where no product protection is required.

·         These cabinets are self-contained 100% exhaust containment enclosures. Air from the work zone passes through a two-stage, high efficiency filter system before being exhausted to the room/atmosphere. These cabinets may be installed on standard laboratory benches or on optional support stands.

·         Personnel and environment protection is provided by inward flow of room air at the work area and high-efficiency particulate air (HEPA) filtration of exhaust air. The inward airflow sweeps aerosols generated during the work process away from the operator into the filter system. A pre-filter protects the HEPA filter from large particles, and the HEPA filter removes particulate contaminates down to sub-micron size from the exhaust air.

·         Supplied complete as above, with cord and plug, suitable to work on 220V single phase, 50Hz, AC supply.

·         Material – SS, MS

Item code: JCA-021B

Salient features:

·         These Class II safety cabinet provide protection for the operator and the environment, with inward airflow away from the operator. Air is filtered before release to the atmosphere.

·         Negative pressure is maintained within the cabinet, which is suitable for work where no product protection is required.

·         These cabinets are self-contained 100% exhaust containment enclosures. Air from the work zone passes through a two-stage, high efficiency filter system before being exhausted to the room/atmosphere. These cabinets may be installed on standard laboratory benches or on optional support stands.

·         Personnel and environment protection is provided by inward flow of room air at the work area and high-efficiency particulate air (HEPA) filtration of exhaust air. The inward airflow sweeps aerosols generated during the work process away from the operator into the filter system. A pre-filter protects the HEPA filter from large particles, and the HEPA filter removes particulate contaminates down to sub-micron size from the exhaust air.

·         Supplied complete as above, with cord and plug, suitable to work on 220V single phase, 50Hz, AC supply.

·         Material – SS, MS

Item code: JCA-021B

Salient features:

·         These Class II safety cabinet provide protection for the operator and the environment, with inward airflow away from the operator. Air is filtered before release to the atmosphere.

·         Negative pressure is maintained within the cabinet, which is suitable for work where no product protection is required.

·         These cabinets are self-contained 100% exhaust containment enclosures. Air from the work zone passes through a two-stage, high efficiency filter system before being exhausted to the room/atmosphere. These cabinets may be installed on standard laboratory benches or on optional support stands.

·         Personnel and environment protection is provided by inward flow of room air at the work area and high-efficiency particulate air (HEPA) filtration of exhaust air. The inward airflow sweeps aerosols generated during the work process away from the operator into the filter system. A pre-filter protects the HEPA filter from large particles, and the HEPA filter removes particulate contaminates down to sub-micron size from the exhaust air.

·         Supplied complete as above, with cord and plug, suitable to work on 220V single phase, 50Hz, AC supply.

·         Material – SS, MS

Item code: JCA-021B

Salient features:

·         These Class II safety cabinet provide protection for the operator and the environment, with inward airflow away from the operator. Air is filtered before release to the atmosphere.

·         Negative pressure is maintained within the cabinet, which is suitable for work where no product protection is required.

·         These cabinets are self-contained 100% exhaust containment enclosures. Air from the work zone passes through a two-stage, high efficiency filter system before being exhausted to the room/atmosphere. These cabinets may be installed on standard laboratory benches or on optional support stands.

·         Personnel and environment protection is provided by inward flow of room air at the work area and high-efficiency particulate air (HEPA) filtration of exhaust air. The inward airflow sweeps aerosols generated during the work process away from the operator into the filter system. A pre-filter protects the HEPA filter from large particles, and the HEPA filter removes particulate contaminates down to sub-micron size from the exhaust air.

·         Supplied complete as above, with cord and plug, suitable to work on 220V single phase, 50Hz, AC supply.

·         Material – SS, MS

Item code: JCA-021B

Salient features:

·         These Class II safety cabinet provide protection for the operator and the environment, with inward airflow away from the operator. Air is filtered before release to the atmosphere.

·         Negative pressure is maintained within the cabinet, which is suitable for work where no product protection is required.

·         These cabinets are self-contained 100% exhaust containment enclosures. Air from the work zone passes through a two-stage, high efficiency filter system before being exhausted to the room/atmosphere. These cabinets may be installed on standard laboratory benches or on optional support stands.

·         Personnel and environment protection is provided by inward flow of room air at the work area and high-efficiency particulate air (HEPA) filtration of exhaust air. The inward airflow sweeps aerosols generated during the work process away from the operator into the filter system. A pre-filter protects the HEPA filter from large particles, and the HEPA filter removes particulate contaminates down to sub-micron size from the exhaust air.

·         Supplied complete as above, with cord and plug, suitable to work on 220V single phase, 50Hz, AC supply.

·         Material – SS, MS

Item code: JCA-021B

Salient features:

·         These Class II safety cabinet provide protection for the operator and the environment, with inward airflow away from the operator. Air is filtered before release to the atmosphere.

·         Negative pressure is maintained within the cabinet, which is suitable for work where no product protection is required.

·         These cabinets are self-contained 100% exhaust containment enclosures. Air from the work zone passes through a two-stage, high efficiency filter system before being exhausted to the room/atmosphere. These cabinets may be installed on standard laboratory benches or on optional support stands.

·         Personnel and environment protection is provided by inward flow of room air at the work area and high-efficiency particulate air (HEPA) filtration of exhaust air. The inward airflow sweeps aerosols generated during the work process away from the operator into the filter system. A pre-filter protects the HEPA filter from large particles, and the HEPA filter removes particulate contaminates down to sub-micron size from the exhaust air.

·         Supplied complete as above, with cord and plug, suitable to work on 220V single phase, 50Hz, AC supply.

·         Material – SS, MS

Item code: JCA-021B

Salient features:

·         These Class II safety cabinet provide protection for the operator and the environment, with inward airflow away from the operator. Air is filtered before release to the atmosphere.

·         Negative pressure is maintained within the cabinet, which is suitable for work where no product protection is required.

·         These cabinets are self-contained 100% exhaust containment enclosures. Air from the work zone passes through a two-stage, high efficiency filter system before being exhausted to the room/atmosphere. These cabinets may be installed on standard laboratory benches or on optional support stands.

·         Personnel and environment protection is provided by inward flow of room air at the work area and high-efficiency particulate air (HEPA) filtration of exhaust air. The inward airflow sweeps aerosols generated during the work process away from the operator into the filter system. A pre-filter protects the HEPA filter from large particles, and the HEPA filter removes particulate contaminates down to sub-micron size from the exhaust air.

·         Supplied complete as above, with cord and plug, suitable to work on 220V single phase, 50Hz, AC supply.

·         Material – SS, MS

Item code: JCA-021B

Salient features:

·         These Class II safety cabinet provide protection for the operator and the environment, with inward airflow away from the operator. Air is filtered before release to the atmosphere.

·         Negative pressure is maintained within the cabinet, which is suitable for work where no product protection is required.

·         These cabinets are self-contained 100% exhaust containment enclosures. Air from the work zone passes through a two-stage, high efficiency filter system before being exhausted to the room/atmosphere. These cabinets may be installed on standard laboratory benches or on optional support stands.

·         Personnel and environment protection is provided by inward flow of room air at the work area and high-efficiency particulate air (HEPA) filtration of exhaust air. The inward airflow sweeps aerosols generated during the work process away from the operator into the filter system. A pre-filter protects the HEPA filter from large particles, and the HEPA filter removes particulate contaminates down to sub-micron size from the exhaust air.

·         Supplied complete as above, with cord and plug, suitable to work on 220V single phase, 50Hz, AC supply.

·         Material – SS, MS

Item code: JCA-021B

Salient features:

·         These Class II safety cabinet provide protection for the operator and the environment, with inward airflow away from the operator. Air is filtered before release to the atmosphere.

·         Negative pressure is maintained within the cabinet, which is suitable for work where no product protection is required.

·         These cabinets are self-contained 100% exhaust containment enclosures. Air from the work zone passes through a two-stage, high efficiency filter system before being exhausted to the room/atmosphere. These cabinets may be installed on standard laboratory benches or on optional support stands.

·         Personnel and environment protection is provided by inward flow of room air at the work area and high-efficiency particulate air (HEPA) filtration of exhaust air. The inward airflow sweeps aerosols generated during the work process away from the operator into the filter system. A pre-filter protects the HEPA filter from large particles, and the HEPA filter removes particulate contaminates down to sub-micron size from the exhaust air.

·         Supplied complete as above, with cord and plug, suitable to work on 220V single phase, 50Hz, AC supply.

·         Material – SS, MS

Item code: JCA-021B

Salient features:

·         These Class II safety cabinet provide protection for the operator and the environment, with inward airflow away from the operator. Air is filtered before release to the atmosphere.

·         Negative pressure is maintained within the cabinet, which is suitable for work where no product protection is required.

·         These cabinets are self-contained 100% exhaust containment enclosures. Air from the work zone passes through a two-stage, high efficiency filter system before being exhausted to the room/atmosphere. These cabinets may be installed on standard laboratory benches or on optional support stands.

·         Personnel and environment protection is provided by inward flow of room air at the work area and high-efficiency particulate air (HEPA) filtration of exhaust air. The inward airflow sweeps aerosols generated during the work process away from the operator into the filter system. A pre-filter protects the HEPA filter from large particles, and the HEPA filter removes particulate contaminates down to sub-micron size from the exhaust air.

·         Supplied complete as above, with cord and plug, suitable to work on 220V single phase, 50Hz, AC supply.

·         Material – SS, MS

CODE: JCA-05

·         Fume Hoods are designed to contain and exhaust toxic, obnoxious, pungent smelling gasses to protect personnel and equipment in the laboratories. The fume hood comprise with international standard on fume handling systems. A motor driven dynamically balanced blower with minimal vibration and noise level creates negative pressure and sucks contaminated air from work area and throws the same in high-up atmosphere through ductings.

·         Fabricated out of thick Duro-board clad from outside in laminated sheet and inside finished in non-corrosive, chemical resistant Epoxy paint. An up & down sliding Sash made of Teakwood mounted in thick glass sheet and workable on weights & pulleys system counter balanced is provided. Fluorescent lighting is provided in the chamber. A gas tap and electric power plug also provided in addition to stainless steel wash basin and suitable water tap.

Item code: JCA-05

·         Working: Manual and Automatic

·         Material: SS and MS

·         Application: Chemical Fumes

·         Use: Laboratory

·         Frequency (Hz): 50 Hz

·         Voltage (V): 240 V

·         Shape: Rectangular

·         Color: White

Item code: JCA-08 

Dehumidifiers are designed to remove excess moisture from atmosphere when manufacturing activities of tablets, capsules and air accuracy is required. Humidity can be brought down to 30% RH with accuracy of ±3% RH.

Capacity:-

• 1 Ton
• 1.5 Ton
• 2 Ton
• 3 Ton.

Additional Information:

• Item Code: JCA-08
• Production Capacity: 120
• Delivery Time: 12 DAYS
• Packaging Details: EXPORT LEVEL PACKAGING AVAILABLE

UV Chamber, which is fabricated using stainless steel. These chambers are highly suitable for storing of the instruments after sterilization. The ultra violet rays are maintained in the chamber in a specially way to keep the instruments sterilized.

Features:

• Power Consumption < 10 watts
• It has ultra violate blue light 8 W
• Micro – Switch ON / OFF Control
• Inside Body Covered with stainless steel
• 12 SS Tray for store instrument

Additional Information:

• Item Code: JCA-09

Additional Information:

• Item Code: MTS-1114

Item code: JCA-031

·         Garment Storage Cabinet is a self-standing providing down flow clean air to clean room Garments. Recommended in change rooms. Suitable for Pharmaceutical, Hospital and O/T, Electronic Industry etc. Supplied complete with Hepa & Pre filter, Motor Blower. Static Pressure Manometer & Built in U.V. Germicidal Light.

Technical Specifications:-

·         Model                         3                                  4

·         Size of Hepa Filter       3’ x 1.5’ x 6′                 4’x 1.5’x 6′

·         No. of Hepa Filter       1                                  1

·         No. of Shelves             2                                  2

·         Other sizes can be fabricated

·         Material: SS & MS     

Item code: JCA-031

·         Garment Storage Cabinet is a self-standing providing down flow clean air to clean room Garments. Recommended in change rooms. Suitable for Pharmaceutical, Hospital and O/T, Electronic Industry etc. Supplied complete with Hepa & Pre filter, Motor Blower. Static Pressure Manometer & Built in U.V. Germicidal Light.

Technical Specifications:-

·         Model                         3                                  4

·         Size of Hepa Filter       3’ x 1.5’ x 6′                 4’x 1.5’x 6′

·         No. of Hepa Filter       1                                  1

·         No. of Shelves             2                                  2

·         Other sizes can be fabricated

·         Material: SS & MS     

Item code: JCA-031

·         Garment Storage Cabinet is a self-standing providing down flow clean air to clean room Garments. Recommended in change rooms. Suitable for Pharmaceutical, Hospital and O/T, Electronic Industry etc. Supplied complete with Hepa & Pre filter, Motor Blower. Static Pressure Manometer & Built in U.V. Germicidal Light.

Technical Specifications:-

·         Model                         3                                  4

·         Size of Hepa Filter       3’ x 1.5’ x 6′                 4’x 1.5’x 6′

·         No. of Hepa Filter       1                                  1

·         No. of Shelves             2                                  2

·         Other sizes can be fabricated

·         Material: SS & MS     

Item code: JCA-031

·         Garment Storage Cabinet is a self-standing providing down flow clean air to clean room Garments. Recommended in change rooms. Suitable for Pharmaceutical, Hospital and O/T, Electronic Industry etc. Supplied complete with Hepa & Pre filter, Motor Blower. Static Pressure Manometer & Built in U.V. Germicidal Light.

Technical Specifications:-

·         Model                         3                                  4

·         Size of Hepa Filter       3’ x 1.5’ x 6′                 4’x 1.5’x 6′

·         No. of Hepa Filter       1                                  1

·         No. of Shelves             2                                  2

·         Other sizes can be fabricated

·         Material: SS & MS     

Item code: JCA-031

·         Garment Storage Cabinet is a self-standing providing down flow clean air to clean room Garments. Recommended in change rooms. Suitable for Pharmaceutical, Hospital and O/T, Electronic Industry etc. Supplied complete with Hepa & Pre filter, Motor Blower. Static Pressure Manometer & Built in U.V. Germicidal Light.

Technical Specifications:-

·         Model                         3                                  4

·         Size of Hepa Filter       3’ x 1.5’ x 6′                 4’x 1.5’x 6′

·         No. of Hepa Filter       1                                  1

·         No. of Shelves             2                                  2

·         Other sizes can be fabricated

·         Material: SS & MS     

Item code: JCA-031

·         Garment Storage Cabinet is a self-standing providing down flow clean air to clean room Garments. Recommended in change rooms. Suitable for Pharmaceutical, Hospital and O/T, Electronic Industry etc. Supplied complete with Hepa & Pre filter, Motor Blower. Static Pressure Manometer & Built in U.V. Germicidal Light.

Technical Specifications:-

·         Model                         3                                  4

·         Size of Hepa Filter       3’ x 1.5’ x 6′                 4’x 1.5’x 6′

·         No. of Hepa Filter       1                                  1

·         No. of Shelves             2                                  2

·         Other sizes can be fabricated

·         Material: SS & MS