Micro Teknik

• Set of Nozzle: 6 mm , 10 mm, and 12 mm (Brass).
• Set of Vanes: Hemispherical and Flat Plate (Optional Inclined)
• Jet Collection Tank : 250 mm Diameter MOC: Perspex
• Sump tank capacity : 75 litres MOC: SS-304 with Matt Buffing
• Measuring tank : 35 litres MOC: SS-304 with Matt Buffing
• Pump : Monoblock type, 0-60 litre/min, Motor 1 HP
• Piping with necessary Valves and Fittings
• Digital Stop Watch with 1/10 second Accuracy
• Detailed Technical Manual and On-site Training

• To calculate the theoretical force a jet exerts on a surface,
• Assuming the impact velocity is the same as nozzle exit velocity,
• calculate the theoretical impact velocity.
• Using the theoretical equation for the impact force of a jet, calculate the impact force.
• Compare the theoretical and measured values.
• To determine the reaction force produced by the impact of jet of water of variety type of target vanes.

Additional Information:

• Production Capacity: 150
• Delivery Time: 2 WEEKS
• Packaging Details: OPTIONAL CARTON AVAILABLE

• To measure the force developed by a jet of water impinging upon a stationary object and comparison with the forces predicted by the momentum theory.
• Impact of jets apparatus enables experiments to be carried out on the reaction force produced on vanes when a jet of water impacts on to the vane.

• Cylindrical operating area made of Plexiglas, diameter 200mm, height 340mm
• Measurement of jet impact forces with weights
• 4 interchangeable deflectors
• Unit mounted on base plate,
• 400x400x40mm, powder-coated steel plate

Item code: MT-101413 

Flow Through Non Circular Pipe

We have garnered praise of manufacturing highly qualitative Flow Through Non Circular Pipe.These are manufactured using quality-approved raw materials in accordance with industrial norms and guidelines. These are used in civil engineering laboratories for applications that involve friction between fluids of different kinds. Easy to set up and install, these are made available to clients at reasonable prices. These are supplied to clients in different specifications at affordable prices.

Friction head losses in straight pipes of different sizes can be investigated over a range of Reynolds' numbers from 103 to nearly 105, thereby covering the laminar, transitional and turbulent flow regimes in smooth pipes. A further test pipe is artificially roughened and, at the higher Reynolds' numbers, shows a clear departure from typical smooth bore pipe characteristics.

In addition to the smooth and roughened pipes, a wide range of pipeline components are fitted, including pipe fittings and control valves, allowing investigation of the losses caused by this type of connection. A clear acrylic section of pipeline houses a Venturi meter, an orifice plate assembly and a Pitot tube, so that these can be investigated as flow measurement devices.

Features:

• Excellent quality

• Easy to install

• Reasonably priced

Additional Information:

• Item Code: MT101413
• Production Capacity: 125
• Delivery Time: 2-3 WEEKS
• Packaging Details: WOODEN BOX/ CARTON

Flow Through Circular Pipe   MT-101412

We have garnered praise of manufacturing highly qualitative Flow Through Circular Pipe. These are manufactured using quality-approved raw materials in accordance with industrial norms and guidelines. These are used in civil engineering laboratories for applications that involve friction between fluids of different kinds. Easy to set up and install, these are made available to clients at reasonable prices. These are supplied to clients in different specifications at affordable prices.

Features:

• Excellent quality.

• Easy to install.

• Reasonably priced.

• High load bearing capacity.
• Compact design.
• High performance.

Additional Information:

• Item Code: MT-101710
• Port of Dispatch: India

The equipment is mounted on a free-standing framework which supports the test pipe work and instrumentation. The following typical pipe fittings are incorporated for study: miter bend, 90° elbow, swept bends (large and small radius), sudden contraction and sudden enlargement. All are instrumented with upstream and downstream pressure tapings.

These tapings are connected to a bank of 12 water manometer tubes mounted on the framework. Pressurization of the manometers is facilitated by a hand pump. A gate valve is used to control the flow rate. A separate gate valve is instrumented with upstream and downstream pressure tapings which are connected to a differential gauge on the edge of the framework. The unit stands on the working top of the Hydraulics Bench, which is also used as the source of water supply.

Additional Information:

• Item Code: MT-101713

CODE: MTFM-26

·         Circuit with four bends of different radii

·         Enlargement, contraction and gate valve, plus flow-control valve

·         Manometer board with 12 tubes plus differential pressure gauge

·         Hand pump for pressurization of manometers

·         Quick-release fitting for easy connection to Hydraulics Bench

·         Educational software available as an option

·         Pipe diameter : 48 mm

·         Differential pressure gauge : 0-3 bar

·         Enlargement diameter : 2 mm

·         Contraction diameter : 48 mm

Fittings:

·         45° miter

·         Elbow

·         Short bend

·         Large bend

·         Enlargement

·         Contraction

·         Manometer range : 0-440 mm

·         Number of manometer tubes: 12

·         Differential manometers : 6

• Axial flow impeller turbine demonstration model
• Electronic measurement of the moment on the turbine shaft using a band brake
• Electronic measurement of the turbine rotational speed with inductive proximity switch
• Transparent turbine housing

MTS-1542HA GENERAL DESCRIPTION of Fluid Machines Lab Equipment

·         The apparatus is a self-contained unit for studying basic hydrology. It consists of a large stainless steel rectangular tank with adjustable tilting mechanism. The tank is filled with a granular medium. Two separate sets of four spray nozzles above the tank simulate rain fall on the catchments. The tank upper walls are transparent. Valve control of the nozzles varies the lag time on the hydrograph to simulate a moving storm. The compartments at each end of the tank are connected to the catchment area by wire mesh to allow flow between the compartment and the catchment. Two wells with valve control are also provided at the middle of the tank. Twenty pressure tapping’s along the orthogonal axes of the tank to measure water table profile by a manometer bank.

TECHNICAL DATA:

·         Tank: Stainless steel 100 cm wide x 200 cm long x 19 cm high. .

·         Inclination: 0-3%.

·         End compartments: 2 ea.

·         Wells: 2 ea.

·         Spray nozzles: 8 nozzles with separate shutoff valves. .

Flow measurement:

·         Rain water: Variable area flow meter.

·         Run off: Calibrated weir. .

·         Manometer: 1 ea.

·         Upper walls: Clear acrylic. .

·         Accessories: - Rectangular ring, circular ring, confined equifer, cylindrical pier. .

·         Power supply: 220 V, 1 Ph, 50 Hz. Other power supply is available on request.

TYPICAL TESTS:

·         Investigation of rainfall/runoff relationships for dry, saturated and impermeable catchments of various slopes for surface runoff.

·         Effect of interflow on outflow hydrograph.

·         Simulation of multiple and moving storms.

·         Cone of depression for single well and interaction of cones of depression for two adjacent wells.

·         De-watering of excavation sites by use of wells.

·         Flow from a well in a confined aquifer.

·         Demonstration of watersheds for a simulated island with rainfall and well flows.

·         Sediment transport and meanders in simulated rivers.

·         A metal frame supports the tank and houses a storage tank.

·         Water is drawn from the storage tank by a pump and separately supplied to the overhead nozzles and/or the two end compartments via a flow meter and pipings with valve control.

·         Run-off from the catchment is measured by a calibrated rectangular weir or returns directly to the storage tank.

Item code: MTS-141WM

Pipe Surge & Water Hammer Apparatus :

·         The apparatus is designed to generate and visualise water hammers in pipes and to demonstrate how a surge chamber works.

·         The trainer contains a pipe section with a surge pipe, solenoid valve & ball valve.

·         In the first experiment a pipe surge is produced by rapidly closing the solenoid valve.

·         The sudden deceleration of the water mass releases kinetic energy, which is converted into potential energy in the surge pipe.

·         The resulting pressure oscillations are measured by a pressure sensor in the pipe.

·         The oscillations are plotted on a strip chart recorder.

·         The oscillation can also be seen as pendulum movement of the water level in the surge chamber.

·         In the second experiment the valve at base of surge pipe is closed so that the rapid closing of the solenoid valve in the pipe section produces a strong water hammer.

·         The water's kinetic energy is converted into pressure energy.

·         The water hammer and the subsequent oscillations are detected by the pressure sensor in the pipe section and plotted on the strip chart recorder.

TECHNICAL SPECIFICATIONS:

·         Water reservoir: 250 mm x 250 mm x 1000 mm (H)

·         Sump Tank: 100 Ltrs, PVC Tank

·         Pump: Centrifugal Pump, 230 VAC, Flow 30 LPM, Max. Head 20 m.

·         Surge Pipe: Acrylic Pipe, 1’’ Diameter, 1 m

·         Pressure Sensor for Surge Pressure Measurement

·         Solenoid Valve: Electrically Actuated Solenoid Valve

·         Strip Chart Recorder

Description

MTS- 101223RS The setup consists of single cylinder, four stroke, VCR (Variable Compression Ratio) Research engine connected to eddy current dynamometer. It is provided with necessary instruments for combustion pressure, crank-angle, airflow, fuel flow, temperatures and load measurements. These signals are interfaced to computer through high speed data acquisition. The setup has stand-alone panel box consisting of air box, twin fuel tank for duel fuel test, manometer, fuel measuring unit, transmitters for air and fuel flow measurements, process indicator and piezo powering unit. Rotameters are provided for cooling water and calorimeter water flow measurement.

The setup enables study of VCR engine performance for both Diesel and Petrol, for brake power, indicated power, frictional power, BMEP, IMEP, brake thermal efficiency, indicated thermal efficiency, Mechanical efficiency, volumetric efficiency, specific fuel consumption, Air fuel ratio, heat balance and combustion analysis.

Engine

Single cylinder four stroke, water cooled, Kirloskar engine modified to VCR Diesel and VCR Petrol. The compression ratio can be changed without stopping the engine and without altering the combustion chamber geometry by specially designed tilting cylinder block arrangement is made to run engine in constant speed and variable speed mode. Facility for Diesel injection point and spark point advancement is provided. Engine is with electric starting arrangement.

Software

Engine Soft is Lab view based software developed by Apex Innovations for engine performance monitoring system. It can serve most of the engine testing application needs including monitoring, reporting, data entry, data logging. It evaluates power, efficiencies, fuel consumption and heat release. It is configurable as per engine set up.

While on line testing of the engine in RUN mode necessary signals are scanned, stored and presented in graph. Stored data file is accessed to view the data graphical and tabular formats. The results and graphs can be printed. The data in excel format can be used for further analysis.

Technical Specifications

Engine: Type 1 cylinder, 4 stroke, Multi fuel, VCR, water cooled, stroke 110 mm, bore 87.5 mm. Capacity 661 cc. Diesel mode: Power 3.5 KW, Speed 1500 rpm, CR range 12:1-18:1. Injection variation: 0- 25 Deg BTDC Petrol mode: Power 4.5 KW @ 1800 rpm, Speed range 1200-1800 rpm, CR range 6:1-10:1, Spark variation: 0-70 deg BTDC.

Dynamo meter: Type eddy current, water cooled, with loading unit.

Propeller shaft: With universal joints.

Air box: M S fabricated with orifice meter and manometer.

Fuel tank: Capacity 15 lit, Type: Duel compartment, with fuel metering pipe of glass

Calorimeter: Type Pipe in pipe.

Piezo sensor: Combustion: Range 5000 PSI, with low noise cable, Diesel line: Range 5000 PSI, with low noise cable.

Crank angle sensor: Resolution 1 Deg, Speed 5500 RPM with TDC pulse.

Data acquisition device: NI USB-6210, 16-bit, 250kS/s.

Piezo powering unit: Make - Cuadra, Model AX-409.

Temperature sensor: Type RTD, PT100 and Thermocouple, Type K.

Temperature transmitter: Type two wire, Input RTD PT100, Range 0–100 Deg C, Output. 4–20 mA and Type two wire, Input Thermocouple.

Load indicator: Digital, Range 0-50 Kg, Supply 230VAC.

Load sensor: Load cell, type strain gauge, range 0-50 Kg.

Fuel flow transmitter: DP transmitter, Range 0-500 mm WC.

Air flow transmitter: Pressure transmitter, Range (-) 250 mm WC.

Software: "Enginesoft" Engine performance analysis software.

Rotameter: Engine cooling 40-400 LPH; Calorimeter 25-250 LPH.

Pump: Type Monoblock.

Overall dimensions: W 2000 x D 2500 x H 1500 mm.

FORCED VORTEX APPARATUS

CODE: MTK-20FV

Specification:

Teknik is counted among the listed manufacturers, supply and exporters of premium quality forced vortex apparatus. The experimental set up consist of a circular transparent cylindrical tank in which four circumferential jets have been placed along the circumference of the cylinder near its bottom which helps in the formation of free vortex. It is assumed that the torque exerted by these jets is negligible. The Orifice is reducing bush so that a reduced diameter can be investigated. The plate can also be rotated with the help of a variable speed motor so that the cylinder rotates about its vertical Axis with the help of a V belt and forced vortex is formed. Conditions wear allowed to steady state and the depth of flow at any particular point was observed not to change over a period of time. The experimental procedure involves measurement of resulting free surface that represents the variation of the sum of the pressure and datum head.

Product Specification

·        Cylinder: Material acrylic Diameter: 200 mm. approx. Height: 300 mm approx.

·        Motor: Variable speed DC motor of compatible

·        Probe:        Made of stainless steel

·        Cross slide: With scale reading in cm

Additional Information:

• Item Code: MTK-20FV
• Production Capacity: 5
• Delivery Time: 2 WEEK

• To determine overall efficiency and pump efficiency of
• To plot head vs. Discharge, pump efficiency vs.

• closed loop water circulation
• compact & stand-alone set up
• stainless steel tanks and wetted parts
• superb painted structure
• simple to operate & maintain

• These are Following characteristics can be studied at different Speeds.
• Discharge V/S Head.
• Discharge V/S Input to pump.
• Discharge V/S Pump efficiency.
• Calculate the output of the pump, given the discharge and the total head.
• Calculate the input
• Calculate the efficiency.

Additional Information:

• Delivery Time: 1 Week
• Packaging Details: Box, Carton

• Hydraulic bench.
• Osborne Reynolds apparatus.
• Dye.

• Support columns.
• Visualization pipes.
• Outlet control valve.
• Needle.
• Reservoir.
• Marble glasses (kanchi) for smoothness of flow.
• Starter.
• Overflow pipe.
• Inlet pipe.
• Dye reservoir.
• Bil mouth.
• Dye control valve.

Additional Information:

• Item Code: MT-146223
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Production Capacity: 85
• Delivery Time: 3 WEEKS
• Packaging Details: OPTIONAL EXPORT CARTON PACKAGING AVAILABLE

Additional Information:

• Item Code: MTS-3522
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: India
• Delivery Time: 1 Week

• Determining the contraction and velocity coefficients.
• Calculating the discharge coefficient.
• Cylindrical glass tank with orifice fitted in base
• Four interchangeable orifices
• Pitot tube and knife edge to measure jet velocity and diameter
• Establishing the coefficient of velocity for a small orifice.

• Easy to functionality
• Sturdy construction
• Negligible maintenance

• The unit is designed to show students how an impulse turbine works and test its performance
• The turbine power is adjusted by means of the nozzle cross-section
• The experimental unit consists of the Pelton wheel, a needle nozzle used as control device (control flow rate), a rope brake dynamometer for loading the turbine and a housing with a transparent front panel
• The transparent cover enables you to observe the water flow, the wheel movement during operation
• The pressure at the turbine inlet is recorded with a pressure gauge
• A spring balance to measure brake power and a digital RPM indicator are attached to wheel shaft
• Thus, the mechanical power output of the turbine can be determined. Flow rate measurement are provided by orifice meter

• Pelton Wheel: 300 mm Diameter with 18 Buckets
• Sump tank capacity: 200 liters High Grade Plastic
• Flow rate measurement: Orifice meter with Burdon type pressure gauge
• Pump : Monoblock type, 4 litre/sec, Head 20 mtrs; Motor 5 HP
• Piping with necessary Valves and Fittings
• Digital RPM Indicator
• Detailed Technical Manual and On-site Training

• Tank : Stainless steel 100 cm wide x 200 cm long x 19 cm high. .Inclination : 0-3% .End compartments : 2 ea. .Wells : 2 ea. .Spray nozzles : 8 nozzles with separate shutoff valves. 

• Rain water : Variable area flow meter.
• Run off : Calibrated weir.

• Rectangular ring.
• circular ring.
• confined equifer.
• cylindrical pier.
• Power supply : 220 V, 1 Ph, 50 Hz.
•  Other power supply is available on request.

Additional Information:

• Item Code: MT-101427

• Highly durable.
• Reliable performance.
• Has sturdy design.
• Quality approved.

Additional Information:

• Item Code: MT-101418

• To visualize the forced & free vortex phenomenon.
• To plot the shape of vortex profile i.e. vertical height vs horizontal radius.

Additional Information:

• Item Code: MT-101417

Additional Information:

• Item Code: MTS-101253

BEND METER TEST RIG

CODE: MTK-1012BM

Specification:

DESCRIPTION:

·       The apparatus consists of a pipeline that contains one Bend meter. The pressure tapings from the Bend meter is taken to differential manometer to measure pressure difference. Present set-up is self-contained water re-circulating unit, provided with a sump tank and a centrifugal pump etc. Flow control valve and by-pass valve are fitted in water line to conduct the experiment on different flow rates. Flow rate of water is measured with the help of measuring tank and stop watch.

EXPERIMENTATION:

·       To demonstrate the use of Bend meter as flow meter.

·       To determine co-efficient of discharge for given Bend meter.

Product Details:

·      Type: Assortment Set

·      Voltage: 230 Volt (v)

·      Material: Metal

Additional Information:

• Item Code: MTK-1012BM
• Production Capacity: 5
• Delivery Time: 15 DAYS
• Packaging Details: BOX

LOSSES DUE TO FRICTION IN PIPE LINES APPARATUS

CODE: MTS-3523

Specification:

·        Losses Due To Friction in Pipe Line

·        We offer highly demanded Losses due to friction in pipe line at the most competitive market price. Manufactured in accordance with the industry laid parameters, offered apparatus is highly demanded around the globe. The setup is designed to study the losses due to friction in pipes of different diameters and materials. This consists of a set of 3 different pipe test sections, supply tank, measuring tank and pump for closed loop water circulation.

Experiments:

·         To determine the losses due to fiction in pipes

Utilities Required:

·         Electric supply 0.5 kW, 220V AC, Single Phase

•        Water supply Tap water connection” BSP Distilled water @ 60 liters (optional)

•        Floor Area with Drain facility

Technical Specifications:

·        Pipes (2 Nos.): Material GI of ½” & 1” diameter.

·        Pipe Test Section Length: 1 m.

·        Instruction Manual: An ENGLISH instruction manual will be provided along with the Apparatus

CROSS FLOW HEAT EXCHANGER APPARATUS

CODE: MTK- 10521CF

Specification:

·         Usage/Application: Laboratory, Equipment

·         Capacity: 100units/month

·         Power: 4, kW

·         Voltage: 220, V, AC

·         Automation Type: Semi-Automatic

·         Color: white and blue

·         Phase: Single, Phase

·         Material: Mild, Steel

·         Floor Area: 1.5, x, 1, m

·         Power Source: Electric

Additional Information:

• Item Code: MTK-10521CF
• Production Capacity: 6
• Delivery Time: 9 DAYS

FLUIDISED BED DRYER AND COATER MTS-105M

·         Display: Digital

·         Brand: Teknik

·         Condition: New

·         Warranty: 1 Year

·         Made in India

FLUIDISED BED DRYER AND COATER

·         Display: Digital

·         Brand: Teknik

·         Condition: New

·         Warranty: 1 Year

·         Made in India

MTS-105M FLUIDISED BED DRYER AND COATER

·         Display: Digital

·         Brand: Teknik

·         Condition: New

·         Warranty: 1 Year

·         Made in India

• Extremely reliable and accurate
• Satisfying performance
• Well equipped with all the necessary operating tools
• Long lasting
• Available at cost efficient price range

• Water enters the turbine though outer periphery of the runner in and leaves the runner in axial direction
• When water flows to the the runner, a part of pressure energy changes to kinetic energy
• Water is completely enclosed in an air tight casing
• The casing & runner is always full of water
• Present set-up has a runner
• Water is fed to the turbine by centrifugal pump, radially to the runner
• The runner is mounted on one end of a central SS shaft & other end is connected to a break arrangement
• Circular window of the turbine casing has a transparent acrylic sheet
• Runner assembly is supported by thick cast iron pedestal
• Load is applied to the turbine by the brake arrangement and the efficiency of the turbine can be calculated
• Draught tube is fitted on the outlet of the turbine
• Set-up is complete with guide mechanism
• Pressure & vacuum gauge are fitted at the inlet & outlet of the turbine for measuring the total supply head to the turbine

Additional Information:

• Item Code: MTS-3525
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: India
• Production Capacity: 80
• Delivery Time: 3 WEEKS
• Packaging Details: EXPORT CARTON PACKAGING AVAILABLE (OPTIONAL)

Additional Information:

• Item Code: 101411
• Production Capacity: 125
• Delivery Time: 2-3 three weeks time
• Packaging Details: OPTIONAL EXPORT CARTON PACKAGING AVAILABLE

Item code: MT-10711

Flow Measurement Apparatus

We are engaged in manufacturing supplying and exporting the best quality of Flow Measurement Apparatus.

FEATURES

Comparative flow coefficient of venturi meter, orifice meter and rotameter.

Additional Information:

• Item Code: MT-10711

Additional Information:

• Item Code: MTS-14022
• Pay Mode Terms: T/T (Bank Transfer)
• Port of Dispatch: India
• Production Capacity: 100
• Delivery Time: 2 weeks
• Packaging Details: optional box carton available

Item code: MTS-101446

Fluidised Bed Characteristics:

Micro Teknik We are leading manufacturer and exporter of a wide range of Fluidized Bed Dryer. The Salt is fluidized, each particle meets the hot air, discharges moisture, gets dry and at the same time travels forward without any mechanical push. We have proven-technology for designing dryers of any capacity. In this state, the solids behave like a free flowing boiling liquid. Clients can avail this products as per there requirements.

Scope of Experimentations:

• To study fluidization characteristics
• To study relationship between velocity of fluid and pressure drop per unit length

• Electricity : 500 watts, 220 V, 1 Phase
• Floor Area : 0.75 m x 0.75 m

• Column : Material Borosilicate Glass
• Packing : Glass Beads
• Water tank : Material Stainless Steel, Capacity 30 Ltrs
• Water Circulation : FHP Pump, Crompton/Sharp make
• Flow Measurement : Rotameter for water
• Pr. Drop Measurement : Manometer
• The whole set-up is well designed and arranged in a good quality painted structure

Additional Information:

• Item Code: MTS-101446

• To determine the Reynold's number and hence the type of flow either laminar or turbulent

Additional Information:

• Item Code: MTS-101255
• Production Capacity: 156
• Delivery Time: 2 WEEKS TIME
• Packaging Details: BOX/ CARTON

CENTRIFUGAL BLOWER TEST RIG

MTK-100GT 

Specification:

·        This equipment comprises of a Centrifugal Blower coupled to a Motor. Three interchangeable impellers with forward, backward and radial vanes are provided with the test rig. A Pitot tube is provided in the delivery line of blower for static Power input to the DC Motor is varied by means of a Thyristor controlled DC Drive to vary the RPM of motor. A RPM Indicator with Proximity sensor indicates the RPM of Blower.

Product Specification

·        Usage/Application: Laboratory Equipment

·        Variable Speed: Dc Motor with Thyristor Controlled Dc Drive

·        Blower: Centrifugal, Forced Draft Type

·        Impeller (3 Nos.): Forward Curved, Backward Curved & Radial Curved

·        Pilot Tube (With Manometer): For Static, Dynamic & Differential Pressure Measurement

·        Stop Watch: Electronic

·        Energy Measurement: Electronic Energy Meter, L&t Make

Additional Information:

• Item Code: MTK-100GT
• Production Capacity: 2
• Delivery Time: 10 DAYS

MULTI STAGE CENTRIFUGAL PUMP TEST RIG

CODE: MTK-7455MS

Specification:

·        Country of Origin: Made in India

·        Pump: 2 or 3 stage, capacity 2HP, speed 2800 RPM (MAX.)

·        Drive: 2 HP DC motor swinging field type With speed control

·        Spring balance: Dial type

·        Sump tank: 800 x 500 x 400 mm size , Capacity 160 liters approx. (stainless steel material )

·        Measuring tank: 400 x 500 x 400 mm size, Capacity 80 liters approx., Fitted with Piezo-meter Tube scale.(stainless

·        Medium flow: Clear water

·        Gauge: One piece vacuum gauge And one piece pressure gauge

·        Stop watch: Electronic type

·        Pressure gauge: Bourdon type , range 0-4 kg/cm2

·        Vacuum gauge: Bourdon type , range 0-760 mm of Hg

·        Tank material: (stainless steel material )

·        Pipe fitting: GI pipe.

Additional Information:

• Item Code: MTK-7455MS
• Production Capacity: 15

REYNOLDS’S APPARATUS

CODE: MTS-101255

Specification:

It is manufactured at our unit by using highest quality materials under the guidance of the experts. This is extensively used to illustrate laminar, transitional and fully turbulent pipe flows. It also determines the conditions under which the flow occurs. Reynolds Apparatus can be availed by our customers at an economical price.

Features:

·        Accurate result

·        Enhanced functional life

·        Easy to use

Product Specification

·        Frequency: 50 Hz

·        Voltage: 220 Volt

·        Phase:         Single Phase

·        Current: 5-15 amp

MTS-105M FLUIDISED BED DRYER AND COATER

·         Display: Digital

·         Brand: Teknik

·         Condition: New

·         Warranty: 1 Year

·         Made in India

MTS-105M FLUIDISED BED DRYER AND COATER

·         Display: Digital

·         Brand: Teknik

·         Condition: New

·         Warranty: 1 Year

·         Made in India

MTS-105M FLUIDISED BED DRYER AND COATER

·         Display: Digital

·         Brand: Teknik

·         Condition: New

·         Warranty: 1 Year

·         Made in India

FLUIDISED BED DRYER AND COATER MTS-105M

·         Display: Digital

·         Brand: Teknik

·         Condition: New

·         Warranty: 1 Year

·         Made in India