Micro Teknik

·         CODE: JEQ-9

·         Muffle Furnaces with double walled construction of thick PCRC sheet. Outside finished in shoving enamel and gap insulated with ceramic wool. Heating elements of kantha A-1 wire fitted with high quality energy regulator, pyrometer, thermocouple, silver thermal fuse, main lead with power plug to work on 220V AC 50Hz single phase. Maximum temperatures 900°C, 1000°C,

Available in:

·         Muffle Size in mms.    Rating

·         100 x 100 x 225            1.5 kw

·         125 x 125 x 250            2.5 kw

·         125 x 125 x 300            3.0 kw

·         150 x 150 x 300            3.5 kw

·         200 x 200 x 300           5 0 kw

Optional:-

·         Solid state temp. Controller in lieu of energy regulator.

·         Digital temp. Indicator-cum-controller.

·         Digital temp. Indicator-cum-controller with computer data logger.

·         Models with maximum temperatures 1100°C, 1200°C & 1600°C available.

CODE: JKA-230BM Product Specification

·         Usage/Application: BIO MEDICAL WASTE INCINERATOR

·         Type Of Incinerator: Hospital Waste Incinerator

·         Waste Type: Bio - Medical waste

·         Capacity: 200 Kg/batch

·         Brand: Teknik

·         Average burn out time: 3 Hrs

·         Power Source: Diesel

·         Burning Ability: 200 Kg/time

·         Material of Construction: Mild Steel power coated

·         I Deal In: New Only

·         Features: Automatic Door / Manual door , Conveyor Belt (Optional), Human Skin Protective paint.

·         Control Panel: Automatic

·         Weight :7-8 tones

·         Chamber: Dual Chamber

·         Furnace Chamber Temperature: 850 Degree To 1050 Degree

·         Air Blower: Centrifugal

·         Burning Efficiency: 99.9%

·         Condition: New

·         Chimney Height: 30 MTR AS PER CPCB NORMS

·         Voltage: 220/440V

·         Minimum Order Quantity: 1

·         Body Type Material: M.S

·         Heater Power: Yes

·         Country of Origin: Made in India

·         Minimum Order Quantity: 1

·         Minimum Order Quantity: 1

Product Description

·         ITEM CODE: JKA-230BM

·         BIO-MEDICAL HOSPITAL INCINERATOR

DESIGN:

·         The design is based on the guidelines set by Central Pollution Control Board (CPCB)-India and normally adopted by military installation all over the country and worldwide. The Efficient power is supplied by electricity as well as oil burners for larger installation. The incinerator combustion chamber is designed for easy maintenance of all internal parts including refractory and isolation.

SPECIFICATIONS:

·         Combustion efficiency 99%.

·         Combustion Chamber : Dual Chamber

·         Temperature of primary chamber is up to 1000°C and the secondary chamber is up to 1450°C.

·         The secondary chamber gas residence time at is two seconds.

·         Power Requirement: Diesel, Electrical

·         AVAILABLE LOADING CAPACITY : 10/25/50/100/150/200/250/500 Kg/Hr.

• Coincidence Focusing System
• 15 x Eyepieces
• One Position Instrument. Measure Both Meridians Without Changing Optical System
• Simple Vertical Adjustable Head To Fit Patient
• Astigmatic Axis 0 to 180 Degree
• Dual Eye Level Sighting System
• Dioptre 36 - 52 (in 0.25 steps)
• Paint Finish : Black Or White
• The Achromatic Optical Systems to Precise Measurement Of The Corneal Radius Curvature And Accurate Measurement Of Radius Curvature Of Contact Lens

• Dust Cover.
• One Spare Bulb.

Additional Information:

• Item Code: MTK-8000
• Pay Mode Terms: T/T (Bank Transfer)

·         40X to 1600X magnification range for studying a range of specimens including hair follicles, cells, and bacteria.

·         10X and 16X eye-pieces provide 8 unique magnification settings.

·         a Siedentop binocular head for precise adjustments, a 2- layer mechanical stage with low-position controls, and coaxial coarse Binocular, 30° 45° incline, 360° rotatable and fine focus for ergonomics and an efficient workflow.

·         Halogen lighting reduces eye-strain for prolonged use.

·         50 Pieces Prepared Microscope Slides Set Professional Grade Specimens for Basic Biological Science Education with Plastic Storage Box.

• The temp controlled unit is operated by advanced micro computer technology.
• The three digital display indication provide the Set Temperature, Air Temperature and Skin Temperature.
• Two function control modes provide the clinician more flexibility while optimizing the thermal environment.
• In addition the skin temperature is display is larger than the set/air temperature display.
• The removable heater and control unit make it easy to clean and service.
• Full visibility & accessibility of the baby is provided by the designed of acrylic hood.
• A full complement of alarm provides safety convenience, with both audible Probe Failure

• Power Failure
• High Temperature
• Low Temperature
• Skin Temperature display can be converted from C to °F by push of a button.
• A big LCD Is provided for more specific information & visualization of the heater power in different modes.
• The High & Low Temperature alarm setting can be adjusted according to the patient condition.
• Humidification is provided with the help of two water trays provided at the back of the unit.
• Three side trays provided at the bottom of the unit to keep consumables.
• The unit rests on four big castors with brakes in the front castors.

• The therapy modes:(a) 4 pole interferential, (b) 4 pole vector, (c) 2 pole modulated
• Digital timer with alarm which cuts off when display read zero.
• Dual intensity display i.e. CH-1 digital display and CH-2 LED display.
• Sweep program.
• Balance control of intensity.

• Medium frequency : 2 Khz & 4 Khz
• Base frequency : 0 - 150 Hz
• Sweep frequency : 0 - 100 Hz

·         Type: Hospital

·         Brand: Teknik

·         Type Of Equipment: Hospital

·         Condition: New Only

·         Country of Origin: Made in India

• The lung exerciser is a great device that will help you make your lungs stronger and breathe better.

• This 3-ball exerciser is divided into three chambers containing three small spheres or balls. These balls rise from the surface because of the air pressure to test the capacity of the lungs. You can reverse the device for exhalation and inhalation to complete the cycle of exercise and testing properly.

• The see-through mechanism works as a motivation to help you breathe better.

Effect on Lungs:

• Using a Respiratory Exerciser teaches you how to take slow, deep breaths, and can be helpful to maximize lung capacity after surgery or when you have a progressive condition, such as lung disease.

• By using this device, you're taking an active step in your recovery and healing.

• Brand: Teknik
• Model No: MTK-7089
• Made from transparent material.
• 3 chamber pf 600,900 & 1200 cc/sec inhaling volume.
• Three colour coded balls for easier identification of inhaled capacity.
• Light weight & easy to carry.
• Patient sticker.
• For single patient use.

Additional Information:

• Production Capacity: 235
• Delivery Time: 1-2 week
• Packaging Details: box available

• Height Minimum 675 mm.
• Height Maximum 875 mm.
• Vertical Traveling Range 200 mm.
• Load Maximum 80 Kg.
• Table Top Size 570x, 400x, 24mm.
• Power Supply Ac 220/110V, 50/60 HZ.
• Power Consumption 20 Kg.
• Weight (Actual) By Rotating Wheel Manually.
• Up & Down movement By Feather Touch Switch.
• Mounted With wooden Top.

CODE: JCA-07A

·         Laminar Air Flow Cabinets works on laminar flow principle involves double filtration of air through coarse Pre Filters (upto “5” microns) and HEPA filters (down to”0.3″microns) for filtration of Biological & Particulate contaminants. A constant uni-directional air flows either horizontally or Vertically, is drawn from atmosphere and passed through pre and HEPA filters on to the work surface. Fabricated out of reinforced pest and weather resistant Duro-board which is clad in from outside in laminated sheet and inner exposed areas are finished in Epoxy paint. Table top stainless steel sheet & MS. Side panels are fixed and made of clear Plexiglas’s. Front door is folding & made of clear Plexiglas’s.

Pre filters:-

·         DOP tested as per Standard BS:”2831″with efficiency”90%”down to”5microns. Made of Washable synthetic material.

HEPA Filters:-

·         Made of Micro glass fibre with corrugated aluminium foil separators. DOP tested as per US

·         Standard”209B.”Efficiency”99.97%”down to 0.3″microns.

Blower Units:-

·         Assembly of AU or equivalent motor workable on”220V”AC”50Hzsingle phase, dynamically balanced blowers making the unit least vibrant with minimum noise level.

Features:-

·         Lighting”: Fluorescent tube lights

·         Sterilization”: Germicidal Ultra Violet (UV) tube

·         Manometer”: Static pressure thick Acrylic block type

CODE: JRS-05

·         These blood banks are designed to meet all modern requirements for conserving whole blood and other specific products used in medicine such as vaccines, reagents, cultures, processing and storing of blood.

·         Standard double walled construction, inner chamber made of stainless steel sheet, outer made of thick mild steel sheet powder coated paint and gap filled with glass wool/PUF for temp. Insulation. complete with face lifting door having locking arrangement.

·         Also having a transparent plexiglass door.

·         Internal cabinet lighting is provided by lamp which is illuminated whenever door is open.

Item code: JEQ-4C

• B.O.D. (Bio-chemical Oxygen Demand) Incubator (Low Temp.): Double walled construction. Inner chamber made of anodized stainless steel/mild steel with self supports for wide range of shelf spacing. Supplied with two/three removable perforated shelves. Clear inner door of acrylic sheet allows inspection of material without disturbing chamber temperature. Outer double walled door is provided with magnetic gasket, lock & key and door operated lamp illumination. The cabinet is mounted on castors.
• Temperature is controlled by a microprocessor digital temperature controller cum indicator from 5°C to 50°C ± 1°C. Inner air circulating system provided for uniform temperature in the whole chamber. A silent sealed compressor with protective devices along with fan cooled condensing coil are placed below the chamber for safe and efficient working.
• Control panel provided at top of cabinet has three indicator lamps for mains, heating & cooling, voltmeter, and temp. Controller, cord-plug etc. and equipment is workable on 220 V AC 50 Hz single phase.
• Note: Use of a suitable Voltage Stabilizer is essential.
• Size of chamber in mms (WxHxD)           Capacity (cu ft.)
• 455 x 410 x 610                                                  4.00
• 500 x 800 x 415                                                  6.10
• 565 x 865 x 550                                                  10.00
• 650 x 900 x 550                                                  12.00
• 700 x 900 x 650                                                  15.00

Optional Arrangements Available:

• Digital temp. Indicator-cum-controller with computer data logger.
• Thermo-hygro-graph.
• Timer: 0-24 hrs.
• Day/night cycle.
• CO2 / Air mixture inlet nozzle.
• Audio-visual alarm.
• Automatic Voltage Stabilizer 3 KVA.

Humidity System (Steam) for BOD Incubator : JEQ-4(C1)

• BOD Incubator can be provided with humidity arrangement.
• Humidity is created by condensation of steam generated by heaters dipped in water.
• Humidity is controlled by imported humidistat from ambient to 95% ± 3% RH.

CODE: JRS-05

·         These blood banks are designed to meet all modern requirements for conserving whole blood and other specific products used in medicine such as vaccines, reagents, cultures, processing and storing of blood.

·         Standard double walled construction, inner chamber made of stainless steel sheet, outer made of thick mild steel sheet powder coated paint and gap filled with glass wool/PUF for temp. Insulation. complete with face lifting door having locking arrangement.

·         Also having a transparent plexiglass door.

·         Internal cabinet lighting is provided by lamp which is illuminated whenever door is open.

Item code: JEQ-1BT

Item code: JEQ-1BT

Item code: JEQ-1BT

Item code: JEQ-1N

·         CODE: JSO-36TZD

·         Binocular Tube Ergonomic tilt able viewing 0° - 210° with converging optics

·         Magnification 0. 4x, 0. 63x, 1. 0x, 1. 6x & 2. 5x with five step magnacharger

·         Eye Piece wf 12.5x/16mm with eye guards

·         Working Distance f=250mm objective lens Focusing Motorised fine focusing adjustment with foot control

·         Light Source 50w led upto 60,000 hours of led lamp life

·         Built in filters Green & yellow

·         Vertical Movement of arm 600mm

·         Microscope Carriers 120° dental carrier

·         Optional Assist scope, beam splitter, ivu camera module, eyepieces 12. 5x/16mm, objectives f: 200mm, f=300mm

Optional accessories

·         Beam Splitter with 'C' Mount and Camera Monocular Assist scope Binocular Assist scope Objective lens 200mm, 300mm & 400 mm

JCA-021A Salient features:

·         These Class III safety cabinet provide protection for the operator and the environment, with inward airflow away from the operator. Air is filtered before release to the atmosphere.

·         Negative pressure is maintained within the cabinet, which is suitable for work where no product protection is required.

·         These cabinets are self-contained 100% exhaust containment enclosures. Air from the work zone passes through a two-stage, high efficiency filter system before being exhausted to the room/atmosphere. These cabinets may be installed on standard laboratory benches or on optional support stands.

·         Personnel and environment protection is provided by inward flow of room air at the work area and high-efficiency particulate air (HEPA) filtration of exhaust air. The inward airflow sweeps aerosols generated during the work process away from the operator into the filter system. A pre-filter protects the HEPA filter from large particles, and the HEPA filter removes particulate contaminates down to sub-micron size from the exhaust air.

·         Supplied complete as above, with cord and plug, suitable to work on 220V single phase, 50Hz, AC supply.

·         Material – SS, MS

CODE: JEQ-4G

Carbon dioxide (CO2) incubators provide optimal growing conditions and contamination prevention for valuable cell cultures.

TEKNIK provides a wide range of CO2 incubators, ranging from a small capacity and volume to a large scale capacity cabinet. All the

CO2 incubators are built with the patented Water Jacket and Air Jacket systems, which minimizes the risk of condensation at the present and in the future.

Features:

Water tank for humidity in the chamber.

Air jacket: equipped with UV Lamp for sterilizing; Water jacket: equipped with HEPA filter.

Equipped with USB port and LCD Display, the incubator can save data in real time.

High quality CO2 gas filter ensures the inside gas quality.

SMC brand gas circuit valves ensure more stable CO2 concentration and less consumption of CO2 gas.

Microcomputer controller, LED displays temperature, CO2 concentration, run-time and timing.

High quality infrared sensor for accurate CO2 concentration.

The working chamber adopts round angle structure, easy to clean.

Model: JEQ-4G

Capacity: 50L

Heating: Air jacket

Temp. Range: RT+ 60 ~ deg C

Control Type: Microcomputer controller

Temp. Fluctuation: < ± 0.2 deg C / at 37 deg C )

Temp. Uniformity: < ± 0.3 deg C( at 37 deg C )

Time Setting: 999h or continuous

Alarm: Audible and visual alarm; Over-temperature alarm; CO2 Concentration alarm.

Shelves: 2 pcs/ adjustable

Material: External cold-rolled steel with painting; internal stainless steel

Door: With inner door and external door

CO2 Range: Infrared sensor, range 0~20%

CO2 Control Resolution: 0.10%

Humidification Type: Water tank for natural evaporation

Sterilization Type: UV lamp for air jacket

Ambient Temp. & Humidity: 18~ 30 deg  C suggest 2 ±2 deg C relative humidity ≤80%

Caster: Foot master caster

Consumption: 350W

Power Supply: AC110/220V±10%, 50/60Hz

Internal Size ( W * D* H)| mm: 368 * 387* 408

External Size( W * D* H) mm: 500 *527* 821

Packing Size ( W * D * H) mm: 655  * 680* 970

Gross Weight(kg): 69

CODE: JEQ-4G

·         Inner chamber measuring 45 x 71 x 45 cm. made of stainless steel sheet.

·         A full view inner glass door is provided along with outer double walled door provided with magnetic gasket.

·         Inlet nozzle for Carbon Dioxide or Air mixture is also provided.

·         Temperature range 5°C above ambient to 60°C ± 2°C.

·         Complete with pressure gauge, inlet/outlet of air/gas, cord plug etc.

·         Workable on 220V AC 50Hz single phase.

Optional:

·         Air compressor

·         Carbon Dioxide cylinder with rubber pipes

CODE: JEQ-4G

·         Inner chamber measuring 45 x 71 x 45 cm. made of stainless steel sheet.

·         A full view inner glass door is provided along with outer double walled door provided with magnetic gasket.

·         Inlet nozzle for Carbon Dioxide or Air mixture is also provided.

·         Temperature range 5°C above ambient to 60°C ± 2°C.

·         Complete with pressure gauge, inlet/outlet of air/gas, cord plug etc.

·         Workable on 220V AC 50Hz single phase.

Optional:

·         Air compressor

·         Carbon Dioxide cylinder with rubber pipes

CODE: JEQ-4G

·         Inner chamber measuring 45 x 71 x 45 cm. made of stainless steel sheet.

·         A full view inner glass door is provided along with outer double walled door provided with magnetic gasket.

·         Inlet nozzle for Carbon Dioxide or Air mixture is also provided.

·         Temperature range 5°C above ambient to 60°C ± 2°C.

·         Complete with pressure gauge, inlet/outlet of air/gas, cord plug etc.

·         Workable on 220V AC 50Hz single phase.

Optional:

·         Air compressor

·         Carbon Dioxide cylinder with rubber pipes

CODE:  JEQ-250

·         It is fully customized with the programming required for your application. This includes multiple manageable profiles, each providing the ability to automatically power on and off the condensing unit and the oil-free vacuum pump in conjunction with ascending, controlled temperature and time settings.

·         Control the rate of freeze, ultimate final freeze temperature, and the duration of time your sample is held at the ultimate freeze temperature before the drying cycle begins.

·         Control of the shelf temperature during the dry cycle, allowing the material to dry in phases, at different temperatures.

·         Automatically control the rate of sublimation during the primary drying cycle with shelf heaters.

·         Through this process, the unit has control of the attendant vacuum pressure. The freeze dryer records and logs the pressure and temperature during the entire freeze-dry cycle for ensured system performance.

·         Connect the unit to a PC via Ethernet cable for data logging and exporting.

·         System includes a 7 CFM oil-free scroll vacuum pump which is quiet, fast, and does not require regular user maintenance.

Features:

·         User-friendly interface provides program customization up to 10 thermal treatment and 12 drying steps.

·         Constructed with a durable stainless-steel chamber and collector

·         Large 4.3" full-color, touch-screen display provides real-time pressure and temperature data

·         Easily connect to a PC via ethernet cable for data logging and communication

·         Capable of freeze drying as much as a 1-2 gallons of material

·         Medium freeze dryer has a 4 L sublimated ice holding capacity

·         Runs on 230Vac VAC 50 Hz VAC power

Technical specification:

·         Type: Standard Chamber, 4 port manifolds

·         Cold Trap Temp.: -40°C

·         Temp. Uniformity: ±1

·         Vacuum Degree: ˂0.1Pa

·         Condensing Capacity: 3kg/h

·         Drying Chamber Capacity: 43L

·         Material Loading Capacity: 3000ml

CODE:  JEQ-250

·         It is fully customized with the programming required for your application. This includes multiple manageable profiles, each providing the ability to automatically power on and off the condensing unit and the oil-free vacuum pump in conjunction with ascending, controlled temperature and time settings.

·         Control the rate of freeze, ultimate final freeze temperature, and the duration of time your sample is held at the ultimate freeze temperature before the drying cycle begins.

·         Control of the shelf temperature during the dry cycle, allowing the material to dry in phases, at different temperatures.

·         Automatically control the rate of sublimation during the primary drying cycle with shelf heaters.

·         Through this process, the unit has control of the attendant vacuum pressure. The freeze dryer records and logs the pressure and temperature during the entire freeze-dry cycle for ensured system performance.

·         Connect the unit to a PC via Ethernet cable for data logging and exporting.

·         System includes a 7 CFM oil-free scroll vacuum pump which is quiet, fast, and does not require regular user maintenance.

Features:

·         User-friendly interface provides program customization up to 10 thermal treatment and 12 drying steps.

·         Constructed with a durable stainless-steel chamber and collector

·         Large 4.3" full-color, touch-screen display provides real-time pressure and temperature data

·         Easily connect to a PC via ethernet cable for data logging and communication

·         Capable of freeze drying as much as a 1-2 gallons of material

·         Medium freeze dryer has a 4 L sublimated ice holding capacity

·         Runs on 230Vac VAC 50 Hz VAC power

Technical specification:

·         Type: Standard Chamber, 4 port manifolds

·         Cold Trap Temp.: -40°C

·         Temp. Uniformity: ±1

·         Vacuum Degree: ˂0.1Pa

·         Condensing Capacity: 3kg/h

·         Drying Chamber Capacity: 43L

·         Material Loading Capacity: 3000ml

• Input Voltage : 220V AC 50Hz.
• Maximum output 120 Volts, smooth intensity control.
• Pulse Width: 10 micro/sec. to 300 milli sec. Pulse duration step control .01 to 300 milli sec.
• Frequency: 6 Pulse per min. to 30 pulse per min. 1 pulse/milli sec. to 100 pulse milli sec.

• Vaccine storage capacity : 15.0 ltrs.
• Weight fully loaded : 34.0 Kgs
• Weight empty (with empty ice pack): 14.7 Kg
• External Surface Material: LLDPE(3)
• Internal Lining Material: LLDPE(3)
• Insulation Material: CFC free Polyurethane
• Insulation Thickness : 65mm
• External Dimensions (WxDxH)) : 65.0 x 65.0 x 37.0cms
• Internal Dimensions (WxDxH)) : 48x 48 x 19 cms
• Vaccine storage dimension: 40 x40x 10 cms
• Lid type & Fixing: Hinged
• Number of Ice pack required : 34
• Number of Ice pack supplied : 34
• Ice pack type: E5/IP.2
• Volume of Ice pack : 0.40 litres.
• Performance: Conforming to WHO Specification : E4/CB.4
• Cold life requirement as per WHO at 43 degree C +-1 degree C without opening. : Min. 48 hours.
• Actual cold life without opening at 43 degree C +-1 degree C as tested by WHO approved testing lab, PSB, Singapore : 80 hours (In house test).

·         Max Speed: up to 5000 rpm

·         3,114 x g (fixed angle); 3,490 x g (swinging bucket)

·         Display: Large, Bright LED

·         Max Capacity: 8 x 15mL (Fixed Angle), 8 x 10 mL (Swinging Bucket)

·         Timer Range: 1~99min

·         Temperature range: 2 -40°C

·         Safety Features: Lid lock, steel armored ring, view port for speed calibration, lid emergency release

·         Program Storage: Yes, 4 program memory

MTB-194 This model is a replica of a life size human skeleton and shows all the skeleton parts in high details.

Its hand assembled to provide intricate details and long-lasting durability.

The main joints are articulated; the upper and lower limbs can be removed easily.

The following parts are detachable:

 Caldarium, Jaw, Legs, Skull, Arms the left side of the skeleton shows the points of origin (red) and the points of insertion (blue) of the muscles.

Mounted on with stand.

·         1.5 Cm x 10 Cm

·         Glass
Code: MTP-46A Test tube

·         1.5 Cm x 10 Cm

·         Glass

• Heat resistant finish.
• Easy to operate without hassles.
• Fully automatic.
• Indigenously designed.
• Provided with electronically controlled panel along with programmable integrated circuit chip.
• Temperature sensing is directly done through R.T.D. Body that is made of aluminium sheet without joints.

• Light in weight.
• Long lasting quality.
• Rust proof finishing.

• Overall Approx. Size: 137 H x 76 W x 46 D cms.
• frame work of SS tubes mounted on 10 cms Dia Castor.
• Eight Rows Six Hooks in each Row.
• SS tray fitted on Bottom side.

• Animal tissue (up to 50mg).
• Rodent tail (up to 1cm).
• Paraffin embedded tissue.
• Buccal swabs.
• Eukaryotic cells (up to 5 x 106 cells).

• Fast protocol: 15 min after lysis step.
• Clear, easy to follow instructions.
• High purity DNA: A260/A280 – 1.7-2.0.
• Time required: 15 minutes after lysis step.
• Binding capacity: Approximately 100μg DNA.
• Typical A260/A280 ratio: 1.7 – 2.0.

• Flow rate: 1~10L/min.
• Oxygen purity: 93%.
• Consumption: 880w.
• Power supply: 220V/50HZ.
• Outlet pressure: 0.04 – 0.07Mpa.
• Noise: ≤60dB (A).
• With Nebulizer.
• LCD display: Switch times, operating. pressure, present working time, accumulated working time, preset time from 10 minutes to 48 hours.
• Alarm: Power failure alarm, high/low pressure alarm, temperature alarm, low purity alarm.

• Flow rate: 1~7L/min.

Additional Information:

• Item Code: MTOC-21
• Production Capacity: 1~10L/min
• Delivery Time: 5-6 days