Micro Teknik

Optional :

1. Air circulating fan.
2. Timer 24 hours.
3. Digital Temp. Indicator-cum-Controller.
4. Digital Temp. Indicator-cum-Controller with computer data logger

Additional Information:

• Item Code: JEQ-3A
• Pay Mode Terms: T/T (Bank Transfer)
• Packaging Details: These teknik ovens ar packed with the compressed foam triangle cutting at all the four corners, then stretched and then wrapped in bubble sheet, and then packed in sturdy virgin box, and again that box is packed with the compressed foam triangle cutting at all the four corners of the box and again packed in another virgin strength card board box. thus making it more convenient,easy, secured packed.

B.O.D. (Bio-chemical Oxygen Demand) Incubator (Low Temp.) : Double walled construction. Inner chamber made of anodized aluminum sheet/stainless steel with self supports for wide range of shelf spacing. Supplied with two/three removable perforated shelves. Clear inner door of acrylic sheet allows inspection of material without disturbing chamber temperature. Outer double walled door is provided with magnetic gasket, lock & key and door operated lamp illumination. The cabinet is mounted on castors.

Temperature is controlled by a micro processor digital temperature controller cum indicator from 5°C to 50°C ± 1°C. Inner air circulating system provided for uniform temperature in the whole chamber. A silent sealed compressor with protective devices along with fan cooled condensing coil are placed below the chamber for safe and efficient working.

Control panel provided at top of cabinet has three indicator lamps for mains, heating & cooling, voltmeter, temp. controller, cord-plug etc. and equipment is workable on 220 V AC 50 Hz single phase.

Note: Use of a suitable Voltage Stabilizer is essential.

Optional Arrangements Available :

Digital temp. indicator-cum-controller with computer data logger.
Thermo-hygro-graph.
Timer : 0-24 hrs.
Day/night cycle.
CO2 / Air mixture inlet nozzle.
Audio-visual alarm.
Automatic Voltage Stabilizer 3 KVA.

BOD Incubator can be provided with humidity arrangement.
Humidity is created by condensation of steam generated by heaters dipped in water. Humidity is controlled by imported humidistat from ambient to 95% ± 3% RH.

Additional Information:

• Item Code: JEQ-4C
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Production Capacity: 556
• Delivery Time: 2 WEEKS
• Packaging Details: BOX/CARTON

Item code: JEQ-4G 

Carbon Dioxide Incubator :

Inner chamber measuring 45 x 71 x 45 cm. made of stainless steel sheet. A full view inner glass door is provided along with outer double walled door provided with magnetic gasket. Inlet nozzle for Carbon Dioxide or Air mixture is also provided. Temperature range 5°C above ambient to 60°C ± 2°C. Complete with pressure gauge, inlet/outlet of air/gas, cord plug etc.

Workable on 220V AC 50Hz single phase.

Optional :

• Air compressor
• Carbon Dioxide cylinder with rubber pipes

Additional Information:

• Item Code: JEQ-4G
• Production Capacity: 40
• Delivery Time: 2 WEEKS

Additional Information:

• Item Code: JEQ-4O
• Production Capacity: 20
• Delivery Time: 2 Week
• Packaging Details: Hard Card Board Box

Item code: JEQ-4A 

Bacteriological Incubator (Memmert type) has a standard double walled construction. Inner chamber made of aluminium or stainless steel sheet and outer made of mild steel sheet finished in powder coated colour combinations. Gap filled with glass wool for temp. Insulation. Double walled door with double glass window for observation in the chamber.

Temperature range 5 °C above ambient to 80°C ±3 °C controlled by a thermostat. L-shaped thermometer provided along with pilot lamps, on-off switch temp. Control knob etc. It works on 220V AC 50Hz single phase.

Chamber sizes in mms :: No. of Trays

• 355 x 355 x 355 :: 2
• 455 x 455 x 455 :: 2
• 455 x 605 x 455 :: 3
• 605 x 605 x 605 :: 3
• 910 x 605 x 455 :: 3
• 910 x 605 x 605 :: 3

Optional :

• Air circulating fan.
• Timer 24 hours.
• Digital temp. Controller-cum-indicator.
• Digital temp. indicator-cum-controller with computer data logger.

Note : Oven & incubator sizes not covered can be fabricated on demand.

Additional Information:

• Item Code: JEQ-4A
• Production Capacity: 60
• Delivery Time: 2 week

Item code: JEQ-4H 

Hybridization Incubator: Inside made of stainless steel temp. Range 5°C above ambient to 90 °C. Temp. controlled by pid controller. This chamber has air circulating fan to ensure uniformity of temp. A carrier to hold bottles ( 6 number of 60 mm diameter x 200 mm depth) can be easily placed on front of rotator mechanism any bottle can be taken out easily from the carrier. The carrier rotates with bottles parallel to the door at a variable speed of 2 to 16 RPM. Viewing glass window in the top allows inspection of the specimen inside the chamber.

Additional Information:

• Item Code: JEQ-4H
• Production Capacity: 256
• Delivery Time: 1 week
• Packaging Details: wooden box/ carton available

• Automatic low water level cut-off device
• Pressure control switch
• Radial lock
• Pedal lift
• Stainless Steel basket
• Time
• Digital micro process PID temperature
• controller cum indicator.

Additional Information:

• Item Code: JEQ-1A
• Pay Mode Terms: T/T (Bank Transfer)
• Production Capacity: Ready Stock
• Delivery Time: 1 Weak
• Packaging Details: Standard Packing Wooden Box

• Temperature range: 50°C above ambient to 100°C.

• Chamber size :

  425 x 250 x 225 mm
  450 x 375 x 375 mm
  600 x 450 x 450 mm

  Optional:

  Digital micro process PID temperature
  controller cum indicator.

Additional Information:

• Item Code: JEQ-2C

Optional accessories :

A versatile electrically heated sterilizer under saturated steam of adjustable pressure of 10 to 20 psi. Double walled construction with boiler made of stainless steel, outer shell made of stainless steel sheet. The lid is made of stainless steel or gun-metal plate, tightening all round with wing nuts.

Gasket made of molded joint-less Neoprene rubber. Equipped with water level arrangement, pressure gauge, air/steam release cock, spring loaded safety valve adjustable to any selected point from 10 psi to 20 psi, accuracy ± 3 psi and drain, cord-plug etc.; to work on 220V AC 50Hz single phase.

Autoclave vertical but in horizontal position and without steam jacket.

Digital microprocessor temp. controller

Automatic low water level cut-off device

Pressure control switch

Item code: JEQ-4C

• B.O.D. (Bio-chemical Oxygen Demand) Incubator (Low Temp.): Double walled construction. Inner chamber made of anodized stainless steel/mild steel with self supports for wide range of shelf spacing. Supplied with two/three removable perforated shelves. Clear inner door of acrylic sheet allows inspection of material without disturbing chamber temperature. Outer double walled door is provided with magnetic gasket, lock & key and door operated lamp illumination. The cabinet is mounted on castors.
• Temperature is controlled by a microprocessor digital temperature controller cum indicator from 5°C to 50°C ± 1°C. Inner air circulating system provided for uniform temperature in the whole chamber. A silent sealed compressor with protective devices along with fan cooled condensing coil are placed below the chamber for safe and efficient working.
• Control panel provided at top of cabinet has three indicator lamps for mains, heating & cooling, voltmeter, and temp. Controller, cord-plug etc. and equipment is workable on 220 V AC 50 Hz single phase.
• Note: Use of a suitable Voltage Stabilizer is essential.
• Size of chamber in mms (WxHxD)           Capacity (cu ft.)
• 455 x 410 x 610                                                  4.00
• 500 x 800 x 415                                                  6.10
• 565 x 865 x 550                                                  10.00
• 650 x 900 x 550                                                  12.00
• 700 x 900 x 650                                                  15.00

Optional Arrangements Available:

• Digital temp. Indicator-cum-controller with computer data logger.
• Thermo-hygro-graph.
• Timer: 0-24 hrs.
• Day/night cycle.
• CO2 / Air mixture inlet nozzle.
• Audio-visual alarm.
• Automatic Voltage Stabilizer 3 KVA.

Humidity System (Steam) for BOD Incubator : JEQ-4(C1)

• BOD Incubator can be provided with humidity arrangement.
• Humidity is created by condensation of steam generated by heaters dipped in water.
• Humidity is controlled by imported humidistat from ambient to 95% ± 3% RH.

Item code: JEQ-4C

• B.O.D. (Bio-chemical Oxygen Demand) Incubator (Low Temp.): Double walled construction. Inner chamber made of anodized stainless steel/mild steel with self supports for wide range of shelf spacing. Supplied with two/three removable perforated shelves. Clear inner door of acrylic sheet allows inspection of material without disturbing chamber temperature. Outer double walled door is provided with magnetic gasket, lock & key and door operated lamp illumination. The cabinet is mounted on castors.
• Temperature is controlled by a microprocessor digital temperature controller cum indicator from 5°C to 50°C ± 1°C. Inner air circulating system provided for uniform temperature in the whole chamber. A silent sealed compressor with protective devices along with fan cooled condensing coil are placed below the chamber for safe and efficient working.
• Control panel provided at top of cabinet has three indicator lamps for mains, heating & cooling, voltmeter, and temp. Controller, cord-plug etc. and equipment is workable on 220 V AC 50 Hz single phase.
• Note: Use of a suitable Voltage Stabilizer is essential.
• Size of chamber in mms (WxHxD)           Capacity (cu ft.)
• 455 x 410 x 610                                                  4.00
• 500 x 800 x 415                                                  6.10
• 565 x 865 x 550                                                  10.00
• 650 x 900 x 550                                                  12.00
• 700 x 900 x 650                                                  15.00

Optional Arrangements Available:

• Digital temp. Indicator-cum-controller with computer data logger.
• Thermo-hygro-graph.
• Timer: 0-24 hrs.
• Day/night cycle.
• CO2 / Air mixture inlet nozzle.
• Audio-visual alarm.
• Automatic Voltage Stabilizer 3 KVA.

Humidity System (Steam) for BOD Incubator : JEQ-4(C1)

• BOD Incubator can be provided with humidity arrangement.
• Humidity is created by condensation of steam generated by heaters dipped in water.
• Humidity is controlled by imported humidistat from ambient to 95% ± 3% RH.

Item code: JEQ-4C

• B.O.D. (Bio-chemical Oxygen Demand) Incubator (Low Temp.): Double walled construction. Inner chamber made of anodized stainless steel/mild steel with self supports for wide range of shelf spacing. Supplied with two/three removable perforated shelves. Clear inner door of acrylic sheet allows inspection of material without disturbing chamber temperature. Outer double walled door is provided with magnetic gasket, lock & key and door operated lamp illumination. The cabinet is mounted on castors.
• Temperature is controlled by a microprocessor digital temperature controller cum indicator from 5°C to 50°C ± 1°C. Inner air circulating system provided for uniform temperature in the whole chamber. A silent sealed compressor with protective devices along with fan cooled condensing coil are placed below the chamber for safe and efficient working.
• Control panel provided at top of cabinet has three indicator lamps for mains, heating & cooling, voltmeter, and temp. Controller, cord-plug etc. and equipment is workable on 220 V AC 50 Hz single phase.
• Note: Use of a suitable Voltage Stabilizer is essential.
• Size of chamber in mms (WxHxD)           Capacity (cu ft.)
• 455 x 410 x 610                                                  4.00
• 500 x 800 x 415                                                  6.10
• 565 x 865 x 550                                                  10.00
• 650 x 900 x 550                                                  12.00
• 700 x 900 x 650                                                  15.00

Optional Arrangements Available:

• Digital temp. Indicator-cum-controller with computer data logger.
• Thermo-hygro-graph.
• Timer: 0-24 hrs.
• Day/night cycle.
• CO2 / Air mixture inlet nozzle.
• Audio-visual alarm.
• Automatic Voltage Stabilizer 3 KVA.

Humidity System (Steam) for BOD Incubator : JEQ-4(C1)

• BOD Incubator can be provided with humidity arrangement.
• Humidity is created by condensation of steam generated by heaters dipped in water.
• Humidity is controlled by imported humidistat from ambient to 95% ± 3% RH.

Item code: JEQ-4C

• B.O.D. (Bio-chemical Oxygen Demand) Incubator (Low Temp.): Double walled construction. Inner chamber made of anodized stainless steel/mild steel with self supports for wide range of shelf spacing. Supplied with two/three removable perforated shelves. Clear inner door of acrylic sheet allows inspection of material without disturbing chamber temperature. Outer double walled door is provided with magnetic gasket, lock & key and door operated lamp illumination. The cabinet is mounted on castors.
• Temperature is controlled by a microprocessor digital temperature controller cum indicator from 5°C to 50°C ± 1°C. Inner air circulating system provided for uniform temperature in the whole chamber. A silent sealed compressor with protective devices along with fan cooled condensing coil are placed below the chamber for safe and efficient working.
• Control panel provided at top of cabinet has three indicator lamps for mains, heating & cooling, voltmeter, and temp. Controller, cord-plug etc. and equipment is workable on 220 V AC 50 Hz single phase.
• Note: Use of a suitable Voltage Stabilizer is essential.
• Size of chamber in mms (WxHxD)           Capacity (cu ft.)
• 455 x 410 x 610                                                  4.00
• 500 x 800 x 415                                                  6.10
• 565 x 865 x 550                                                  10.00
• 650 x 900 x 550                                                  12.00
• 700 x 900 x 650                                                  15.00

Optional Arrangements Available:

• Digital temp. Indicator-cum-controller with computer data logger.
• Thermo-hygro-graph.
• Timer: 0-24 hrs.
• Day/night cycle.
• CO2 / Air mixture inlet nozzle.
• Audio-visual alarm.
• Automatic Voltage Stabilizer 3 KVA.

Humidity System (Steam) for BOD Incubator : JEQ-4(C1)

• BOD Incubator can be provided with humidity arrangement.
• Humidity is created by condensation of steam generated by heaters dipped in water.
• Humidity is controlled by imported humidistat from ambient to 95% ± 3% RH.

Item code: JEQ-4C

• B.O.D. (Bio-chemical Oxygen Demand) Incubator (Low Temp.): Double walled construction. Inner chamber made of anodized stainless steel/mild steel with self supports for wide range of shelf spacing. Supplied with two/three removable perforated shelves. Clear inner door of acrylic sheet allows inspection of material without disturbing chamber temperature. Outer double walled door is provided with magnetic gasket, lock & key and door operated lamp illumination. The cabinet is mounted on castors.
• Temperature is controlled by a microprocessor digital temperature controller cum indicator from 5°C to 50°C ± 1°C. Inner air circulating system provided for uniform temperature in the whole chamber. A silent sealed compressor with protective devices along with fan cooled condensing coil are placed below the chamber for safe and efficient working.
• Control panel provided at top of cabinet has three indicator lamps for mains, heating & cooling, voltmeter, and temp. Controller, cord-plug etc. and equipment is workable on 220 V AC 50 Hz single phase.
• Note: Use of a suitable Voltage Stabilizer is essential.
• Size of chamber in mms (WxHxD)           Capacity (cu ft.)
• 455 x 410 x 610                                                  4.00
• 500 x 800 x 415                                                  6.10
• 565 x 865 x 550                                                  10.00
• 650 x 900 x 550                                                  12.00
• 700 x 900 x 650                                                  15.00

Optional Arrangements Available:

• Digital temp. Indicator-cum-controller with computer data logger.
• Thermo-hygro-graph.
• Timer: 0-24 hrs.
• Day/night cycle.
• CO2 / Air mixture inlet nozzle.
• Audio-visual alarm.
• Automatic Voltage Stabilizer 3 KVA.

Humidity System (Steam) for BOD Incubator : JEQ-4(C1)

• BOD Incubator can be provided with humidity arrangement.
• Humidity is created by condensation of steam generated by heaters dipped in water.
• Humidity is controlled by imported humidistat from ambient to 95% ± 3% RH.

Item code: JEQ-4C

• B.O.D. (Bio-chemical Oxygen Demand) Incubator (Low Temp.): Double walled construction. Inner chamber made of anodized stainless steel/mild steel with self supports for wide range of shelf spacing. Supplied with two/three removable perforated shelves. Clear inner door of acrylic sheet allows inspection of material without disturbing chamber temperature. Outer double walled door is provided with magnetic gasket, lock & key and door operated lamp illumination. The cabinet is mounted on castors.
• Temperature is controlled by a microprocessor digital temperature controller cum indicator from 5°C to 50°C ± 1°C. Inner air circulating system provided for uniform temperature in the whole chamber. A silent sealed compressor with protective devices along with fan cooled condensing coil are placed below the chamber for safe and efficient working.
• Control panel provided at top of cabinet has three indicator lamps for mains, heating & cooling, voltmeter, and temp. Controller, cord-plug etc. and equipment is workable on 220 V AC 50 Hz single phase.
• Note: Use of a suitable Voltage Stabilizer is essential.
• Size of chamber in mms (WxHxD)           Capacity (cu ft.)
• 455 x 410 x 610                                                  4.00
• 500 x 800 x 415                                                  6.10
• 565 x 865 x 550                                                  10.00
• 650 x 900 x 550                                                  12.00
• 700 x 900 x 650                                                  15.00

Optional Arrangements Available:

• Digital temp. Indicator-cum-controller with computer data logger.
• Thermo-hygro-graph.
• Timer: 0-24 hrs.
• Day/night cycle.
• CO2 / Air mixture inlet nozzle.
• Audio-visual alarm.
• Automatic Voltage Stabilizer 3 KVA.

Humidity System (Steam) for BOD Incubator : JEQ-4(C1)

• BOD Incubator can be provided with humidity arrangement.
• Humidity is created by condensation of steam generated by heaters dipped in water.
• Humidity is controlled by imported humidistat from ambient to 95% ± 3% RH.

Item code: JEQ-4C

• B.O.D. (Bio-chemical Oxygen Demand) Incubator (Low Temp.): Double walled construction. Inner chamber made of anodized stainless steel/mild steel with self supports for wide range of shelf spacing. Supplied with two/three removable perforated shelves. Clear inner door of acrylic sheet allows inspection of material without disturbing chamber temperature. Outer double walled door is provided with magnetic gasket, lock & key and door operated lamp illumination. The cabinet is mounted on castors.
• Temperature is controlled by a microprocessor digital temperature controller cum indicator from 5°C to 50°C ± 1°C. Inner air circulating system provided for uniform temperature in the whole chamber. A silent sealed compressor with protective devices along with fan cooled condensing coil are placed below the chamber for safe and efficient working.
• Control panel provided at top of cabinet has three indicator lamps for mains, heating & cooling, voltmeter, and temp. Controller, cord-plug etc. and equipment is workable on 220 V AC 50 Hz single phase.
• Note: Use of a suitable Voltage Stabilizer is essential.
• Size of chamber in mms (WxHxD)           Capacity (cu ft.)
• 455 x 410 x 610                                                  4.00
• 500 x 800 x 415                                                  6.10
• 565 x 865 x 550                                                  10.00
• 650 x 900 x 550                                                  12.00
• 700 x 900 x 650                                                  15.00

Optional Arrangements Available:

• Digital temp. Indicator-cum-controller with computer data logger.
• Thermo-hygro-graph.
• Timer: 0-24 hrs.
• Day/night cycle.
• CO2 / Air mixture inlet nozzle.
• Audio-visual alarm.
• Automatic Voltage Stabilizer 3 KVA.

Humidity System (Steam) for BOD Incubator : JEQ-4(C1)

• BOD Incubator can be provided with humidity arrangement.
• Humidity is created by condensation of steam generated by heaters dipped in water.
• Humidity is controlled by imported humidistat from ambient to 95% ± 3% RH.

Item code: JEQ-4C

• B.O.D. (Bio-chemical Oxygen Demand) Incubator (Low Temp.): Double walled construction. Inner chamber made of anodized stainless steel/mild steel with self supports for wide range of shelf spacing. Supplied with two/three removable perforated shelves. Clear inner door of acrylic sheet allows inspection of material without disturbing chamber temperature. Outer double walled door is provided with magnetic gasket, lock & key and door operated lamp illumination. The cabinet is mounted on castors.
• Temperature is controlled by a microprocessor digital temperature controller cum indicator from 5°C to 50°C ± 1°C. Inner air circulating system provided for uniform temperature in the whole chamber. A silent sealed compressor with protective devices along with fan cooled condensing coil are placed below the chamber for safe and efficient working.
• Control panel provided at top of cabinet has three indicator lamps for mains, heating & cooling, voltmeter, and temp. Controller, cord-plug etc. and equipment is workable on 220 V AC 50 Hz single phase.
• Note: Use of a suitable Voltage Stabilizer is essential.
• Size of chamber in mms (WxHxD)           Capacity (cu ft.)
• 455 x 410 x 610                                                  4.00
• 500 x 800 x 415                                                  6.10
• 565 x 865 x 550                                                  10.00
• 650 x 900 x 550                                                  12.00
• 700 x 900 x 650                                                  15.00

Optional Arrangements Available:

• Digital temp. Indicator-cum-controller with computer data logger.
• Thermo-hygro-graph.
• Timer: 0-24 hrs.
• Day/night cycle.
• CO2 / Air mixture inlet nozzle.
• Audio-visual alarm.
• Automatic Voltage Stabilizer 3 KVA.

Humidity System (Steam) for BOD Incubator : JEQ-4(C1)

• BOD Incubator can be provided with humidity arrangement.
• Humidity is created by condensation of steam generated by heaters dipped in water.
• Humidity is controlled by imported humidistat from ambient to 95% ± 3% RH.

Item code: JEQ-4C

• B.O.D. (Bio-chemical Oxygen Demand) Incubator (Low Temp.): Double walled construction. Inner chamber made of anodized stainless steel/mild steel with self supports for wide range of shelf spacing. Supplied with two/three removable perforated shelves. Clear inner door of acrylic sheet allows inspection of material without disturbing chamber temperature. Outer double walled door is provided with magnetic gasket, lock & key and door operated lamp illumination. The cabinet is mounted on castors.
• Temperature is controlled by a microprocessor digital temperature controller cum indicator from 5°C to 50°C ± 1°C. Inner air circulating system provided for uniform temperature in the whole chamber. A silent sealed compressor with protective devices along with fan cooled condensing coil are placed below the chamber for safe and efficient working.
• Control panel provided at top of cabinet has three indicator lamps for mains, heating & cooling, voltmeter, and temp. Controller, cord-plug etc. and equipment is workable on 220 V AC 50 Hz single phase.
• Note: Use of a suitable Voltage Stabilizer is essential.
• Size of chamber in mms (WxHxD)           Capacity (cu ft.)
• 455 x 410 x 610                                                  4.00
• 500 x 800 x 415                                                  6.10
• 565 x 865 x 550                                                  10.00
• 650 x 900 x 550                                                  12.00
• 700 x 900 x 650                                                  15.00

Optional Arrangements Available:

• Digital temp. Indicator-cum-controller with computer data logger.
• Thermo-hygro-graph.
• Timer: 0-24 hrs.
• Day/night cycle.
• CO2 / Air mixture inlet nozzle.
• Audio-visual alarm.
• Automatic Voltage Stabilizer 3 KVA.

Humidity System (Steam) for BOD Incubator : JEQ-4(C1)

• BOD Incubator can be provided with humidity arrangement.
• Humidity is created by condensation of steam generated by heaters dipped in water.
• Humidity is controlled by imported humidistat from ambient to 95% ± 3% RH.

Item code: JEQ-ETO

·         Capacity: 300ltr Ltr/hr

·         Material: SS 304

·         Equipment Materials: SS 304

·         Display Type: Digital

·         Leakage testing function to eliminate and ensure any leakage possibility in ETO sterilizer.

·         In the ETO Sterilizer, automatic cycle progression can be seamlessly achieved through distinct phases: vacuum, exposure, sterilizing, and aerating.

·         The negative pressure within the chamber prevents the gas from entering the operating area, ensuring safety and containment.

·         One of the standout features of the ETO Sterilizer is its intuitive control panel screen, which accurately displays the various phases of the sterilization process. This allows for precise monitoring and control, ensuring optimal efficiency and effectiveness throughout each stage of operation.

·         Strict control over vacuum levels, chamber temperature, and exposure duration (aeration time) ensures the ETO Sterilizer’s optimal performance, guaranteeing thorough and effective sterilization.

·         Chamber and cabinet made of high quality stainless steel.

·         Aeration system to safeguard the operator from exposure of sterilant/ETO Gas.

Uses:

·         ETO sterilization plays a vital role in ensuring sterility for a wide range of medical and surgical devices. This low-temperature process is particularly valuable for:

·         Heat-sensitive medical devices: Plastic instruments, electronics within devices, and temperature sensitive materials can all be safely sterilized with ETO without risk of damage.

·         Impenetrable materials: ETO gas effectively penetrates complex shapes and reaches areas inaccessible to other methods like steam sterilization.

·         Incompatible materials: Certain materials simply cannot withstand the harsh conditions of steam sterilization. ETO offers a safe alternative for these delicate components.

Item code: JEQ-ETO

·         Capacity: 300ltr Ltr/hr

·         Material: SS 304

·         Equipment Materials: SS 304

·         Display Type: Digital

·         Leakage testing function to eliminate and ensure any leakage possibility in ETO sterilizer.

·         In the ETO Sterilizer, automatic cycle progression can be seamlessly achieved through distinct phases: vacuum, exposure, sterilizing, and aerating.

·         The negative pressure within the chamber prevents the gas from entering the operating area, ensuring safety and containment.

·         One of the standout features of the ETO Sterilizer is its intuitive control panel screen, which accurately displays the various phases of the sterilization process. This allows for precise monitoring and control, ensuring optimal efficiency and effectiveness throughout each stage of operation.

·         Strict control over vacuum levels, chamber temperature, and exposure duration (aeration time) ensures the ETO Sterilizer’s optimal performance, guaranteeing thorough and effective sterilization.

·         Chamber and cabinet made of high quality stainless steel.

·         Aeration system to safeguard the operator from exposure of sterilant/ETO Gas.

Uses:

·         ETO sterilization plays a vital role in ensuring sterility for a wide range of medical and surgical devices. This low-temperature process is particularly valuable for:

·         Heat-sensitive medical devices: Plastic instruments, electronics within devices, and temperature sensitive materials can all be safely sterilized with ETO without risk of damage.

·         Impenetrable materials: ETO gas effectively penetrates complex shapes and reaches areas inaccessible to other methods like steam sterilization.

·         Incompatible materials: Certain materials simply cannot withstand the harsh conditions of steam sterilization. ETO offers a safe alternative for these delicate components.

Item code: JEQ-ETO

·         Capacity: 300ltr Ltr/hr

·         Material: SS 304

·         Equipment Materials: SS 304

·         Display Type: Digital

·         Leakage testing function to eliminate and ensure any leakage possibility in ETO sterilizer.

·         In the ETO Sterilizer, automatic cycle progression can be seamlessly achieved through distinct phases: vacuum, exposure, sterilizing, and aerating.

·         The negative pressure within the chamber prevents the gas from entering the operating area, ensuring safety and containment.

·         One of the standout features of the ETO Sterilizer is its intuitive control panel screen, which accurately displays the various phases of the sterilization process. This allows for precise monitoring and control, ensuring optimal efficiency and effectiveness throughout each stage of operation.

·         Strict control over vacuum levels, chamber temperature, and exposure duration (aeration time) ensures the ETO Sterilizer’s optimal performance, guaranteeing thorough and effective sterilization.

·         Chamber and cabinet made of high quality stainless steel.

·         Aeration system to safeguard the operator from exposure of sterilant/ETO Gas.

Uses:

·         ETO sterilization plays a vital role in ensuring sterility for a wide range of medical and surgical devices. This low-temperature process is particularly valuable for:

·         Heat-sensitive medical devices: Plastic instruments, electronics within devices, and temperature sensitive materials can all be safely sterilized with ETO without risk of damage.

·         Impenetrable materials: ETO gas effectively penetrates complex shapes and reaches areas inaccessible to other methods like steam sterilization.

·         Incompatible materials: Certain materials simply cannot withstand the harsh conditions of steam sterilization. ETO offers a safe alternative for these delicate components.

Item code: JEQ-ETO

·         Capacity: 300ltr Ltr/hr

·         Material: SS 304

·         Equipment Materials: SS 304

·         Display Type: Digital

·         Leakage testing function to eliminate and ensure any leakage possibility in ETO sterilizer.

·         In the ETO Sterilizer, automatic cycle progression can be seamlessly achieved through distinct phases: vacuum, exposure, sterilizing, and aerating.

·         The negative pressure within the chamber prevents the gas from entering the operating area, ensuring safety and containment.

·         One of the standout features of the ETO Sterilizer is its intuitive control panel screen, which accurately displays the various phases of the sterilization process. This allows for precise monitoring and control, ensuring optimal efficiency and effectiveness throughout each stage of operation.

·         Strict control over vacuum levels, chamber temperature, and exposure duration (aeration time) ensures the ETO Sterilizer’s optimal performance, guaranteeing thorough and effective sterilization.

·         Chamber and cabinet made of high quality stainless steel.

·         Aeration system to safeguard the operator from exposure of sterilant/ETO Gas.

Uses:

·         ETO sterilization plays a vital role in ensuring sterility for a wide range of medical and surgical devices. This low-temperature process is particularly valuable for:

·         Heat-sensitive medical devices: Plastic instruments, electronics within devices, and temperature sensitive materials can all be safely sterilized with ETO without risk of damage.

·         Impenetrable materials: ETO gas effectively penetrates complex shapes and reaches areas inaccessible to other methods like steam sterilization.

·         Incompatible materials: Certain materials simply cannot withstand the harsh conditions of steam sterilization. ETO offers a safe alternative for these delicate components.

Item code: JEQ-ETO

·         Capacity: 300ltr Ltr/hr

·         Material: SS 304

·         Equipment Materials: SS 304

·         Display Type: Digital

·         Leakage testing function to eliminate and ensure any leakage possibility in ETO sterilizer.

·         In the ETO Sterilizer, automatic cycle progression can be seamlessly achieved through distinct phases: vacuum, exposure, sterilizing, and aerating.

·         The negative pressure within the chamber prevents the gas from entering the operating area, ensuring safety and containment.

·         One of the standout features of the ETO Sterilizer is its intuitive control panel screen, which accurately displays the various phases of the sterilization process. This allows for precise monitoring and control, ensuring optimal efficiency and effectiveness throughout each stage of operation.

·         Strict control over vacuum levels, chamber temperature, and exposure duration (aeration time) ensures the ETO Sterilizer’s optimal performance, guaranteeing thorough and effective sterilization.

·         Chamber and cabinet made of high quality stainless steel.

·         Aeration system to safeguard the operator from exposure of sterilant/ETO Gas.

Uses:

·         ETO sterilization plays a vital role in ensuring sterility for a wide range of medical and surgical devices. This low-temperature process is particularly valuable for:

·         Heat-sensitive medical devices: Plastic instruments, electronics within devices, and temperature sensitive materials can all be safely sterilized with ETO without risk of damage.

·         Impenetrable materials: ETO gas effectively penetrates complex shapes and reaches areas inaccessible to other methods like steam sterilization.

·         Incompatible materials: Certain materials simply cannot withstand the harsh conditions of steam sterilization. ETO offers a safe alternative for these delicate components.

Item code: JEQ-ETO

·         Capacity: 300ltr Ltr/hr

·         Material: SS 304

·         Equipment Materials: SS 304

·         Display Type: Digital

·         Leakage testing function to eliminate and ensure any leakage possibility in ETO sterilizer.

·         In the ETO Sterilizer, automatic cycle progression can be seamlessly achieved through distinct phases: vacuum, exposure, sterilizing, and aerating.

·         The negative pressure within the chamber prevents the gas from entering the operating area, ensuring safety and containment.

·         One of the standout features of the ETO Sterilizer is its intuitive control panel screen, which accurately displays the various phases of the sterilization process. This allows for precise monitoring and control, ensuring optimal efficiency and effectiveness throughout each stage of operation.

·         Strict control over vacuum levels, chamber temperature, and exposure duration (aeration time) ensures the ETO Sterilizer’s optimal performance, guaranteeing thorough and effective sterilization.

·         Chamber and cabinet made of high quality stainless steel.

·         Aeration system to safeguard the operator from exposure of sterilant/ETO Gas.

Uses:

·         ETO sterilization plays a vital role in ensuring sterility for a wide range of medical and surgical devices. This low-temperature process is particularly valuable for:

·         Heat-sensitive medical devices: Plastic instruments, electronics within devices, and temperature sensitive materials can all be safely sterilized with ETO without risk of damage.

·         Impenetrable materials: ETO gas effectively penetrates complex shapes and reaches areas inaccessible to other methods like steam sterilization.

·         Incompatible materials: Certain materials simply cannot withstand the harsh conditions of steam sterilization. ETO offers a safe alternative for these delicate components.

Item code: JEQ-ETO

·         Capacity: 300ltr Ltr/hr

·         Material: SS 304

·         Equipment Materials: SS 304

·         Display Type: Digital

·         Leakage testing function to eliminate and ensure any leakage possibility in ETO sterilizer.

·         In the ETO Sterilizer, automatic cycle progression can be seamlessly achieved through distinct phases: vacuum, exposure, sterilizing, and aerating.

·         The negative pressure within the chamber prevents the gas from entering the operating area, ensuring safety and containment.

·         One of the standout features of the ETO Sterilizer is its intuitive control panel screen, which accurately displays the various phases of the sterilization process. This allows for precise monitoring and control, ensuring optimal efficiency and effectiveness throughout each stage of operation.

·         Strict control over vacuum levels, chamber temperature, and exposure duration (aeration time) ensures the ETO Sterilizer’s optimal performance, guaranteeing thorough and effective sterilization.

·         Chamber and cabinet made of high quality stainless steel.

·         Aeration system to safeguard the operator from exposure of sterilant/ETO Gas.

Uses:

·         ETO sterilization plays a vital role in ensuring sterility for a wide range of medical and surgical devices. This low-temperature process is particularly valuable for:

·         Heat-sensitive medical devices: Plastic instruments, electronics within devices, and temperature sensitive materials can all be safely sterilized with ETO without risk of damage.

·         Impenetrable materials: ETO gas effectively penetrates complex shapes and reaches areas inaccessible to other methods like steam sterilization.

·         Incompatible materials: Certain materials simply cannot withstand the harsh conditions of steam sterilization. ETO offers a safe alternative for these delicate components.

Item code: JEQ-ETO

·         Capacity: 300ltr Ltr/hr

·         Material: SS 304

·         Equipment Materials: SS 304

·         Display Type: Digital

·         Leakage testing function to eliminate and ensure any leakage possibility in ETO sterilizer.

·         In the ETO Sterilizer, automatic cycle progression can be seamlessly achieved through distinct phases: vacuum, exposure, sterilizing, and aerating.

·         The negative pressure within the chamber prevents the gas from entering the operating area, ensuring safety and containment.

·         One of the standout features of the ETO Sterilizer is its intuitive control panel screen, which accurately displays the various phases of the sterilization process. This allows for precise monitoring and control, ensuring optimal efficiency and effectiveness throughout each stage of operation.

·         Strict control over vacuum levels, chamber temperature, and exposure duration (aeration time) ensures the ETO Sterilizer’s optimal performance, guaranteeing thorough and effective sterilization.

·         Chamber and cabinet made of high quality stainless steel.

·         Aeration system to safeguard the operator from exposure of sterilant/ETO Gas.

Uses:

·         ETO sterilization plays a vital role in ensuring sterility for a wide range of medical and surgical devices. This low-temperature process is particularly valuable for:

·         Heat-sensitive medical devices: Plastic instruments, electronics within devices, and temperature sensitive materials can all be safely sterilized with ETO without risk of damage.

·         Impenetrable materials: ETO gas effectively penetrates complex shapes and reaches areas inaccessible to other methods like steam sterilization.

·         Incompatible materials: Certain materials simply cannot withstand the harsh conditions of steam sterilization. ETO offers a safe alternative for these delicate components.

Item code: JEQ-ETO

·         Capacity: 300ltr Ltr/hr

·         Material: SS 304

·         Equipment Materials: SS 304

·         Display Type: Digital

·         Leakage testing function to eliminate and ensure any leakage possibility in ETO sterilizer.

·         In the ETO Sterilizer, automatic cycle progression can be seamlessly achieved through distinct phases: vacuum, exposure, sterilizing, and aerating.

·         The negative pressure within the chamber prevents the gas from entering the operating area, ensuring safety and containment.

·         One of the standout features of the ETO Sterilizer is its intuitive control panel screen, which accurately displays the various phases of the sterilization process. This allows for precise monitoring and control, ensuring optimal efficiency and effectiveness throughout each stage of operation.

·         Strict control over vacuum levels, chamber temperature, and exposure duration (aeration time) ensures the ETO Sterilizer’s optimal performance, guaranteeing thorough and effective sterilization.

·         Chamber and cabinet made of high quality stainless steel.

·         Aeration system to safeguard the operator from exposure of sterilant/ETO Gas.

Uses:

·         ETO sterilization plays a vital role in ensuring sterility for a wide range of medical and surgical devices. This low-temperature process is particularly valuable for:

·         Heat-sensitive medical devices: Plastic instruments, electronics within devices, and temperature sensitive materials can all be safely sterilized with ETO without risk of damage.

·         Impenetrable materials: ETO gas effectively penetrates complex shapes and reaches areas inaccessible to other methods like steam sterilization.

·         Incompatible materials: Certain materials simply cannot withstand the harsh conditions of steam sterilization. ETO offers a safe alternative for these delicate components.

Item code: JEQ-ETO

·         Capacity: 300ltr Ltr/hr

·         Material: SS 304

·         Equipment Materials: SS 304

·         Display Type: Digital

·         Leakage testing function to eliminate and ensure any leakage possibility in ETO sterilizer.

·         In the ETO Sterilizer, automatic cycle progression can be seamlessly achieved through distinct phases: vacuum, exposure, sterilizing, and aerating.

·         The negative pressure within the chamber prevents the gas from entering the operating area, ensuring safety and containment.

·         One of the standout features of the ETO Sterilizer is its intuitive control panel screen, which accurately displays the various phases of the sterilization process. This allows for precise monitoring and control, ensuring optimal efficiency and effectiveness throughout each stage of operation.

·         Strict control over vacuum levels, chamber temperature, and exposure duration (aeration time) ensures the ETO Sterilizer’s optimal performance, guaranteeing thorough and effective sterilization.

·         Chamber and cabinet made of high quality stainless steel.

·         Aeration system to safeguard the operator from exposure of sterilant/ETO Gas.

Uses:

·         ETO sterilization plays a vital role in ensuring sterility for a wide range of medical and surgical devices. This low-temperature process is particularly valuable for:

·         Heat-sensitive medical devices: Plastic instruments, electronics within devices, and temperature sensitive materials can all be safely sterilized with ETO without risk of damage.

·         Impenetrable materials: ETO gas effectively penetrates complex shapes and reaches areas inaccessible to other methods like steam sterilization.

·         Incompatible materials: Certain materials simply cannot withstand the harsh conditions of steam sterilization. ETO offers a safe alternative for these delicate components.

Item code: JEQ-ETO

·         Capacity: 300ltr Ltr/hr

·         Material: SS 304

·         Equipment Materials: SS 304

·         Display Type: Digital

·         Leakage testing function to eliminate and ensure any leakage possibility in ETO sterilizer.

·         In the ETO Sterilizer, automatic cycle progression can be seamlessly achieved through distinct phases: vacuum, exposure, sterilizing, and aerating.

·         The negative pressure within the chamber prevents the gas from entering the operating area, ensuring safety and containment.

·         One of the standout features of the ETO Sterilizer is its intuitive control panel screen, which accurately displays the various phases of the sterilization process. This allows for precise monitoring and control, ensuring optimal efficiency and effectiveness throughout each stage of operation.

·         Strict control over vacuum levels, chamber temperature, and exposure duration (aeration time) ensures the ETO Sterilizer’s optimal performance, guaranteeing thorough and effective sterilization.

·         Chamber and cabinet made of high quality stainless steel.

·         Aeration system to safeguard the operator from exposure of sterilant/ETO Gas.

Uses:

·         ETO sterilization plays a vital role in ensuring sterility for a wide range of medical and surgical devices. This low-temperature process is particularly valuable for:

·         Heat-sensitive medical devices: Plastic instruments, electronics within devices, and temperature sensitive materials can all be safely sterilized with ETO without risk of damage.

·         Impenetrable materials: ETO gas effectively penetrates complex shapes and reaches areas inaccessible to other methods like steam sterilization.

·         Incompatible materials: Certain materials simply cannot withstand the harsh conditions of steam sterilization. ETO offers a safe alternative for these delicate components.

Item code: JEQ-ETO

·         Capacity: 300ltr Ltr/hr

·         Material: SS 304

·         Equipment Materials: SS 304

·         Display Type: Digital

·         Leakage testing function to eliminate and ensure any leakage possibility in ETO sterilizer.

·         In the ETO Sterilizer, automatic cycle progression can be seamlessly achieved through distinct phases: vacuum, exposure, sterilizing, and aerating.

·         The negative pressure within the chamber prevents the gas from entering the operating area, ensuring safety and containment.

·         One of the standout features of the ETO Sterilizer is its intuitive control panel screen, which accurately displays the various phases of the sterilization process. This allows for precise monitoring and control, ensuring optimal efficiency and effectiveness throughout each stage of operation.

·         Strict control over vacuum levels, chamber temperature, and exposure duration (aeration time) ensures the ETO Sterilizer’s optimal performance, guaranteeing thorough and effective sterilization.

·         Chamber and cabinet made of high quality stainless steel.

·         Aeration system to safeguard the operator from exposure of sterilant/ETO Gas.

Uses:

·         ETO sterilization plays a vital role in ensuring sterility for a wide range of medical and surgical devices. This low-temperature process is particularly valuable for:

·         Heat-sensitive medical devices: Plastic instruments, electronics within devices, and temperature sensitive materials can all be safely sterilized with ETO without risk of damage.

·         Impenetrable materials: ETO gas effectively penetrates complex shapes and reaches areas inaccessible to other methods like steam sterilization.

·         Incompatible materials: Certain materials simply cannot withstand the harsh conditions of steam sterilization. ETO offers a safe alternative for these delicate components.

Item code: JEQ-ETO

·         Capacity: 300ltr Ltr/hr

·         Material: SS 304

·         Equipment Materials: SS 304

·         Display Type: Digital

·         Leakage testing function to eliminate and ensure any leakage possibility in ETO sterilizer.

·         In the ETO Sterilizer, automatic cycle progression can be seamlessly achieved through distinct phases: vacuum, exposure, sterilizing, and aerating.

·         The negative pressure within the chamber prevents the gas from entering the operating area, ensuring safety and containment.

·         One of the standout features of the ETO Sterilizer is its intuitive control panel screen, which accurately displays the various phases of the sterilization process. This allows for precise monitoring and control, ensuring optimal efficiency and effectiveness throughout each stage of operation.

·         Strict control over vacuum levels, chamber temperature, and exposure duration (aeration time) ensures the ETO Sterilizer’s optimal performance, guaranteeing thorough and effective sterilization.

·         Chamber and cabinet made of high quality stainless steel.

·         Aeration system to safeguard the operator from exposure of sterilant/ETO Gas.

Uses:

·         ETO sterilization plays a vital role in ensuring sterility for a wide range of medical and surgical devices. This low-temperature process is particularly valuable for:

·         Heat-sensitive medical devices: Plastic instruments, electronics within devices, and temperature sensitive materials can all be safely sterilized with ETO without risk of damage.

·         Impenetrable materials: ETO gas effectively penetrates complex shapes and reaches areas inaccessible to other methods like steam sterilization.

·         Incompatible materials: Certain materials simply cannot withstand the harsh conditions of steam sterilization. ETO offers a safe alternative for these delicate components.

Item code: JEQ-ETO

·         Capacity: 300ltr Ltr/hr

·         Material: SS 304

·         Equipment Materials: SS 304

·         Display Type: Digital

·         Leakage testing function to eliminate and ensure any leakage possibility in ETO sterilizer.

·         In the ETO Sterilizer, automatic cycle progression can be seamlessly achieved through distinct phases: vacuum, exposure, sterilizing, and aerating.

·         The negative pressure within the chamber prevents the gas from entering the operating area, ensuring safety and containment.

·         One of the standout features of the ETO Sterilizer is its intuitive control panel screen, which accurately displays the various phases of the sterilization process. This allows for precise monitoring and control, ensuring optimal efficiency and effectiveness throughout each stage of operation.

·         Strict control over vacuum levels, chamber temperature, and exposure duration (aeration time) ensures the ETO Sterilizer’s optimal performance, guaranteeing thorough and effective sterilization.

·         Chamber and cabinet made of high quality stainless steel.

·         Aeration system to safeguard the operator from exposure of sterilant/ETO Gas.

Uses:

·         ETO sterilization plays a vital role in ensuring sterility for a wide range of medical and surgical devices. This low-temperature process is particularly valuable for:

·         Heat-sensitive medical devices: Plastic instruments, electronics within devices, and temperature sensitive materials can all be safely sterilized with ETO without risk of damage.

·         Impenetrable materials: ETO gas effectively penetrates complex shapes and reaches areas inaccessible to other methods like steam sterilization.

·         Incompatible materials: Certain materials simply cannot withstand the harsh conditions of steam sterilization. ETO offers a safe alternative for these delicate components.

Item code: JEQ-ETO

·         Capacity: 300ltr Ltr/hr

·         Material: SS 304

·         Equipment Materials: SS 304

·         Display Type: Digital

·         Leakage testing function to eliminate and ensure any leakage possibility in ETO sterilizer.

·         In the ETO Sterilizer, automatic cycle progression can be seamlessly achieved through distinct phases: vacuum, exposure, sterilizing, and aerating.

·         The negative pressure within the chamber prevents the gas from entering the operating area, ensuring safety and containment.

·         One of the standout features of the ETO Sterilizer is its intuitive control panel screen, which accurately displays the various phases of the sterilization process. This allows for precise monitoring and control, ensuring optimal efficiency and effectiveness throughout each stage of operation.

·         Strict control over vacuum levels, chamber temperature, and exposure duration (aeration time) ensures the ETO Sterilizer’s optimal performance, guaranteeing thorough and effective sterilization.

·         Chamber and cabinet made of high quality stainless steel.

·         Aeration system to safeguard the operator from exposure of sterilant/ETO Gas.

Uses:

·         ETO sterilization plays a vital role in ensuring sterility for a wide range of medical and surgical devices. This low-temperature process is particularly valuable for:

·         Heat-sensitive medical devices: Plastic instruments, electronics within devices, and temperature sensitive materials can all be safely sterilized with ETO without risk of damage.

·         Impenetrable materials: ETO gas effectively penetrates complex shapes and reaches areas inaccessible to other methods like steam sterilization.

·         Incompatible materials: Certain materials simply cannot withstand the harsh conditions of steam sterilization. ETO offers a safe alternative for these delicate components.

Item code: JEQ-ETO

·         Capacity: 300ltr Ltr/hr

·         Material: SS 304

·         Equipment Materials: SS 304

·         Display Type: Digital

·         Leakage testing function to eliminate and ensure any leakage possibility in ETO sterilizer.

·         In the ETO Sterilizer, automatic cycle progression can be seamlessly achieved through distinct phases: vacuum, exposure, sterilizing, and aerating.

·         The negative pressure within the chamber prevents the gas from entering the operating area, ensuring safety and containment.

·         One of the standout features of the ETO Sterilizer is its intuitive control panel screen, which accurately displays the various phases of the sterilization process. This allows for precise monitoring and control, ensuring optimal efficiency and effectiveness throughout each stage of operation.

·         Strict control over vacuum levels, chamber temperature, and exposure duration (aeration time) ensures the ETO Sterilizer’s optimal performance, guaranteeing thorough and effective sterilization.

·         Chamber and cabinet made of high quality stainless steel.

·         Aeration system to safeguard the operator from exposure of sterilant/ETO Gas.

Uses:

·         ETO sterilization plays a vital role in ensuring sterility for a wide range of medical and surgical devices. This low-temperature process is particularly valuable for:

·         Heat-sensitive medical devices: Plastic instruments, electronics within devices, and temperature sensitive materials can all be safely sterilized with ETO without risk of damage.

·         Impenetrable materials: ETO gas effectively penetrates complex shapes and reaches areas inaccessible to other methods like steam sterilization.

·         Incompatible materials: Certain materials simply cannot withstand the harsh conditions of steam sterilization. ETO offers a safe alternative for these delicate components.

Item code: JEQ-ETO

·         Capacity: 300ltr Ltr/hr

·         Material: SS 304

·         Equipment Materials: SS 304

·         Display Type: Digital

·         Leakage testing function to eliminate and ensure any leakage possibility in ETO sterilizer.

·         In the ETO Sterilizer, automatic cycle progression can be seamlessly achieved through distinct phases: vacuum, exposure, sterilizing, and aerating.

·         The negative pressure within the chamber prevents the gas from entering the operating area, ensuring safety and containment.

·         One of the standout features of the ETO Sterilizer is its intuitive control panel screen, which accurately displays the various phases of the sterilization process. This allows for precise monitoring and control, ensuring optimal efficiency and effectiveness throughout each stage of operation.

·         Strict control over vacuum levels, chamber temperature, and exposure duration (aeration time) ensures the ETO Sterilizer’s optimal performance, guaranteeing thorough and effective sterilization.

·         Chamber and cabinet made of high quality stainless steel.

·         Aeration system to safeguard the operator from exposure of sterilant/ETO Gas.

Uses:

·         ETO sterilization plays a vital role in ensuring sterility for a wide range of medical and surgical devices. This low-temperature process is particularly valuable for:

·         Heat-sensitive medical devices: Plastic instruments, electronics within devices, and temperature sensitive materials can all be safely sterilized with ETO without risk of damage.

·         Impenetrable materials: ETO gas effectively penetrates complex shapes and reaches areas inaccessible to other methods like steam sterilization.

·         Incompatible materials: Certain materials simply cannot withstand the harsh conditions of steam sterilization. ETO offers a safe alternative for these delicate components.

Item code: JEQ-ETO

·         Capacity: 300ltr Ltr/hr

·         Material: SS 304

·         Equipment Materials: SS 304

·         Display Type: Digital

·         Leakage testing function to eliminate and ensure any leakage possibility in ETO sterilizer.

·         In the ETO Sterilizer, automatic cycle progression can be seamlessly achieved through distinct phases: vacuum, exposure, sterilizing, and aerating.

·         The negative pressure within the chamber prevents the gas from entering the operating area, ensuring safety and containment.

·         One of the standout features of the ETO Sterilizer is its intuitive control panel screen, which accurately displays the various phases of the sterilization process. This allows for precise monitoring and control, ensuring optimal efficiency and effectiveness throughout each stage of operation.

·         Strict control over vacuum levels, chamber temperature, and exposure duration (aeration time) ensures the ETO Sterilizer’s optimal performance, guaranteeing thorough and effective sterilization.

·         Chamber and cabinet made of high quality stainless steel.

·         Aeration system to safeguard the operator from exposure of sterilant/ETO Gas.

Uses:

·         ETO sterilization plays a vital role in ensuring sterility for a wide range of medical and surgical devices. This low-temperature process is particularly valuable for:

·         Heat-sensitive medical devices: Plastic instruments, electronics within devices, and temperature sensitive materials can all be safely sterilized with ETO without risk of damage.

·         Impenetrable materials: ETO gas effectively penetrates complex shapes and reaches areas inaccessible to other methods like steam sterilization.

·         Incompatible materials: Certain materials simply cannot withstand the harsh conditions of steam sterilization. ETO offers a safe alternative for these delicate components.

Item code: JEQ-ETO

·         Capacity: 300ltr Ltr/hr

·         Material: SS 304

·         Equipment Materials: SS 304

·         Display Type: Digital

·         Leakage testing function to eliminate and ensure any leakage possibility in ETO sterilizer.

·         In the ETO Sterilizer, automatic cycle progression can be seamlessly achieved through distinct phases: vacuum, exposure, sterilizing, and aerating.

·         The negative pressure within the chamber prevents the gas from entering the operating area, ensuring safety and containment.

·         One of the standout features of the ETO Sterilizer is its intuitive control panel screen, which accurately displays the various phases of the sterilization process. This allows for precise monitoring and control, ensuring optimal efficiency and effectiveness throughout each stage of operation.

·         Strict control over vacuum levels, chamber temperature, and exposure duration (aeration time) ensures the ETO Sterilizer’s optimal performance, guaranteeing thorough and effective sterilization.

·         Chamber and cabinet made of high quality stainless steel.

·         Aeration system to safeguard the operator from exposure of sterilant/ETO Gas.

Uses:

·         ETO sterilization plays a vital role in ensuring sterility for a wide range of medical and surgical devices. This low-temperature process is particularly valuable for:

·         Heat-sensitive medical devices: Plastic instruments, electronics within devices, and temperature sensitive materials can all be safely sterilized with ETO without risk of damage.

·         Impenetrable materials: ETO gas effectively penetrates complex shapes and reaches areas inaccessible to other methods like steam sterilization.

·         Incompatible materials: Certain materials simply cannot withstand the harsh conditions of steam sterilization. ETO offers a safe alternative for these delicate components.

Item code: JEQ-ETO

·         Capacity: 300ltr Ltr/hr

·         Material: SS 304

·         Equipment Materials: SS 304

·         Display Type: Digital

·         Leakage testing function to eliminate and ensure any leakage possibility in ETO sterilizer.

·         In the ETO Sterilizer, automatic cycle progression can be seamlessly achieved through distinct phases: vacuum, exposure, sterilizing, and aerating.

·         The negative pressure within the chamber prevents the gas from entering the operating area, ensuring safety and containment.

·         One of the standout features of the ETO Sterilizer is its intuitive control panel screen, which accurately displays the various phases of the sterilization process. This allows for precise monitoring and control, ensuring optimal efficiency and effectiveness throughout each stage of operation.

·         Strict control over vacuum levels, chamber temperature, and exposure duration (aeration time) ensures the ETO Sterilizer’s optimal performance, guaranteeing thorough and effective sterilization.

·         Chamber and cabinet made of high quality stainless steel.

·         Aeration system to safeguard the operator from exposure of sterilant/ETO Gas.

Uses:

·         ETO sterilization plays a vital role in ensuring sterility for a wide range of medical and surgical devices. This low-temperature process is particularly valuable for:

·         Heat-sensitive medical devices: Plastic instruments, electronics within devices, and temperature sensitive materials can all be safely sterilized with ETO without risk of damage.

·         Impenetrable materials: ETO gas effectively penetrates complex shapes and reaches areas inaccessible to other methods like steam sterilization.

·         Incompatible materials: Certain materials simply cannot withstand the harsh conditions of steam sterilization. ETO offers a safe alternative for these delicate components.

Item code: JEQ-ETO

·         Capacity: 300ltr Ltr/hr

·         Material: SS 304

·         Equipment Materials: SS 304

·         Display Type: Digital

·         Leakage testing function to eliminate and ensure any leakage possibility in ETO sterilizer.

·         In the ETO Sterilizer, automatic cycle progression can be seamlessly achieved through distinct phases: vacuum, exposure, sterilizing, and aerating.

·         The negative pressure within the chamber prevents the gas from entering the operating area, ensuring safety and containment.

·         One of the standout features of the ETO Sterilizer is its intuitive control panel screen, which accurately displays the various phases of the sterilization process. This allows for precise monitoring and control, ensuring optimal efficiency and effectiveness throughout each stage of operation.

·         Strict control over vacuum levels, chamber temperature, and exposure duration (aeration time) ensures the ETO Sterilizer’s optimal performance, guaranteeing thorough and effective sterilization.

·         Chamber and cabinet made of high quality stainless steel.

·         Aeration system to safeguard the operator from exposure of sterilant/ETO Gas.

Uses:

·         ETO sterilization plays a vital role in ensuring sterility for a wide range of medical and surgical devices. This low-temperature process is particularly valuable for:

·         Heat-sensitive medical devices: Plastic instruments, electronics within devices, and temperature sensitive materials can all be safely sterilized with ETO without risk of damage.

·         Impenetrable materials: ETO gas effectively penetrates complex shapes and reaches areas inaccessible to other methods like steam sterilization.

·         Incompatible materials: Certain materials simply cannot withstand the harsh conditions of steam sterilization. ETO offers a safe alternative for these delicate components.

Item code: JEQ-ETO

·         Capacity: 300ltr Ltr/hr

·         Material: SS 304

·         Equipment Materials: SS 304

·         Display Type: Digital

·         Leakage testing function to eliminate and ensure any leakage possibility in ETO sterilizer.

·         In the ETO Sterilizer, automatic cycle progression can be seamlessly achieved through distinct phases: vacuum, exposure, sterilizing, and aerating.

·         The negative pressure within the chamber prevents the gas from entering the operating area, ensuring safety and containment.

·         One of the standout features of the ETO Sterilizer is its intuitive control panel screen, which accurately displays the various phases of the sterilization process. This allows for precise monitoring and control, ensuring optimal efficiency and effectiveness throughout each stage of operation.

·         Strict control over vacuum levels, chamber temperature, and exposure duration (aeration time) ensures the ETO Sterilizer’s optimal performance, guaranteeing thorough and effective sterilization.

·         Chamber and cabinet made of high quality stainless steel.

·         Aeration system to safeguard the operator from exposure of sterilant/ETO Gas.

Uses:

·         ETO sterilization plays a vital role in ensuring sterility for a wide range of medical and surgical devices. This low-temperature process is particularly valuable for:

·         Heat-sensitive medical devices: Plastic instruments, electronics within devices, and temperature sensitive materials can all be safely sterilized with ETO without risk of damage.

·         Impenetrable materials: ETO gas effectively penetrates complex shapes and reaches areas inaccessible to other methods like steam sterilization.

·         Incompatible materials: Certain materials simply cannot withstand the harsh conditions of steam sterilization. ETO offers a safe alternative for these delicate components.