Milestone Infra

Form	Liquid
Type	polymer Based
Adhesion To Concrete	yes
Compressive Strength	40mpa
Packaging Type	drum
Pot Life	40 minutes
Shelf Life	12 months

Recommended primer for Fosroc cementitious repair system. For improving and bonding floor toppings, renders and mortars; repair of worn, damaged or spalled concrete; polymer modified floor screeds. Advantages Simply brush onto concrete as a primer. Single component, gauged as required. „ High adhesion -Provides excellent bond to concrete, masonry, stone work plaster and block board. „ Increased strength - Improves tensile and flexural properties of mortar. Allows thin section applications. „ Versatile - Compatible with all common hydraulic cements

Additional Information:

• Production Capacity: As per Requirement
• Delivery Time: Quick

Packaging Size	.5 LTR / 1 KG
Main Raw Material	POLYSTER
Grouting Gap Range	12-51 MM
Compressive Strength	70N/mm2 in 7 days
Shelf Life	12 MONTHS
Surface Dry Time	20-25 MINUTE
Bar Diameter Mm	12-51 MM
Bonding Strength Mpa	70 MPA
Compressive Strength N Per Mm	70
Brand	Fosroc

Lokfix are used for high strength corrosion resistant anchoring of bolts and bars from 12 - 51mm diameter into concrete, rock, masonry or brickwork where high speed of installation and early application of load is required. Permanent installation of reinforcement starter bars, foundation bolts, base plates, balustrading, barriers and safety fences, railway tracks, tie-back anchors, reinforcement dowelling abutments, ground anchors for towers, cranes, dock sills. Advantages „ Rapid strength gain „ Vibration resistant „ Corrosion resistant „ Non expansive „ Can be placed under water

Additional Information:

• Production Capacity: As per Requirement
• Delivery Time: Quick
• Packaging Details: 1 KG

Brand	Fosroc
Category	Acrylic Based Polymer Coating
Usage/Application	To protect atmospherically exposed reinforced concrete structures from attack by acid gases, chlorid
Packaging Size	27 KG

Brushbond comprises a two component acrylic polymer modified cementitious coating supplied in ready to mix kits. Brushbond can be simply applied by stiff brush, roller, spray or trowel to obtain the desired texture

Additional Information:

• Production Capacity: AS PER REQUIREMENT
• Delivery Time: QUICK
• Packaging Details: Industrial kit : 27 kg (14 ltr) pack consisting of: Powder : 20 kg bag Liquid : 7 kg pail

Grade Standard	Analytical Grade
Packaging Size	15 kg
pH Value	7-9
Shelf Life	12 month
Physical State	Liquid
Category	Waterproofing Coating, Crystalline Waterproofing

Brushbond TGP* crystalline capillary waterproofing system contains proprietary blend of portland cement, quartz aggregate and special chemicals. In the presence of moisture, the active chemicals in Brushbond TGP* crystalline waterproofing system penetrates concrete and react chemically with free lime to produce insoluble crystals. This crystalline growth reduces porosity by blocking capillaries and filling hairline non structural cracks ( upto 0.25mm wide) caused by shrinkage or expansion. Unlike metallic and membrane types of waterproofing which only form a surface barrier, Brushbond TGP* crystalline waterproofing system, in the presence of water, continues producing crystals and lasting imperviousness to water.

Additional Information:

• Production Capacity: AS PER REQUIREMENT
• Delivery Time: QUICK
• Packaging Details: 20 KG.

Form	Liquid
Usage/Application	Conbextra EP10 is a low viscocity epoxy grout
Packaging Size	1LTR
Packaging Type	CAN
Shelf Life	3 YEARS

A highly fluid epoxy grout for dynamic/ repetitive load applications gap width up to 10mm.
Conbextra EP10 is a low viscocity epoxy grout for situations where heavy dynamic or mobile loads are encountered. It is ideal for grouting in small gaps between a base plate and substrate which needs filling and the structural load be uniformly distributed. Typical applications are reciprocating machinery, testing equipment, heavy crane and transporter rails, high speed turbines, centrifuges and drop forges. Also for use in conditions where chemical spillage may be encountered. Typical situations could be met in steelworks, refineries, electroplating works and chemical plants

Additional Information:

• Production Capacity: 10000LITRE
• Delivery Time: SAME DAY

Category	Waterproofing Coating
Brand	Fosroc
Packaging Size	20kg
pH Value	7-9 ph
Temperature	5 Deg C and 45 Deg C
Packaging Type	Packet
Form of Chemical	Liquid

USER : To protect atmospherically exposed reinforced concrete structures from attack by acid gases, chloride ions, oxygen and water. The product is also suitable to protect other cementitious substrates and masonry for new and existing structures. Typical applications include.
Description : Brushbond comprises a two component acrylic polymer modified cementitious coating supplied in ready to mix kits. Brushbond can be simply applied by stiff brush, roller, spray or trowel to obtain the desired texture.

Additional Information:

• Production Capacity: AS PER REQUIREMENT
• Delivery Time: QUICK
• Packaging Details: POWDER : 20 KG BAG, LIQUID : 7 KG PAIL

System Type	Epoxy Coating
Floor Type	Industrial Floor, Pharma Floor, Food Floor, Parking, Warehouse, Showroom
Total Thickness	300–500 µm
Brand	Fosrac
Usage/Application	Floors
Base Type	Solvent Free
Finish	Semi Gloss
Features	Chemical Resistant
Packaging Size	4 Ltr
Service Temperature	0–60°C
Color	Grey
Country of Origin	Made in India
Shelf Life	6 months in unopened container
Temperature	20 degree C

This Epoxy Floor Coating of Fosroc are best quality available at discounted price. It comes in 4 litres pack and has 6 months shelf life if it is in a closed container.        

Additional Information:

• Production Capacity: 20000
• Delivery Time: Same days

Packaging Size	2 Kg
Brand	Waterproofing Coating
Usage/Application	Roofs
Form	Liquid
Packaging Type	Bucket
pH Value	7-8

Dekguard PU is a high quality, polyurethane, protective coating which can be applied to a variety of surfaces including steel, concrete and fully cured epoxies. It is supplied as a two pack material in pre-weighed quantities ready for on-site mixing and use. Dekguard PU is applied to a dry surface, as a single coat of between 95 and 145 microns wet film thickness, which will cure to give a finished dry film thickness of between 50 and 75 microns. Additional coats may be required for extreme exposure conditions.

Additional Information:

• Production Capacity: AS PER REQUIREMENT
• Delivery Time: QUICK
• Packaging Details: 05 KG, 20 KG.

Form of Chemical	Liquid
Purity	100%
Usage/Application	Waterproofing
Category	Waterproofing Admixture
Brand	Fosroc
Packaging Size	20 L

To minimise permeability and increase the waterproofi ng properties of concrete, plaster and cement sand mortars for critical applications like roof slabs,screeds, basements, external plastering, bathroom fl oors, water tanks, sumps, drains etc.

Packaging Size	4 kg
Usage/Application	Concrete Bonding Agent
Category	Epoxy
Brand	Fosroc
Adhesion To Concrete	yes
Compressive Strength	70MPA
Shelf Life	12 MONTHS

For bonding fresh wet cementitious materials to existing cementitious surfaces. For use on horizontal surfaces or on vertical surfaces where mortar or concrete can be supported by formwork. The long ‘open’ life makes it suitable for use with formwork or where additional steel reinforcement has to be fitted. The product is ideal for roads, bridges, pavements, loading bays and factories, and for bonded or granolithic floor toppings. Nitobond EP is equally suited to internal and external applications.

Additional Information:

• Production Capacity: As per Requirement
• Delivery Time: Quick

Usage	Workability
Application	Concrete
Grade Standard	M30-M70
Form	Liquid
Type Of Admixture	PC Based Admixture
Brand	Fosroc

Fosroc Auramix V200 is a Viscosity Modifying Admixture for contemporary concrete requirements:

 Self-consolidating concrete.
 Pumped concrete.
 Sprayed concrete.
 Light weight aggregate concrete.
 SCC with low fines content.
 Concrete with improper gap grading or low binder content.

Additional Information:

• Production Capacity: As per Requirement
• Delivery Time: QUICK
• Packaging Details: 200 KG

Category	SBR Polymer
Brand	FOSROC
Color	WHITE

For modifying and improving bonding of floor toppings, renderings and mortars; repair of worn, damaged and spalled concrete, repair of large cracks; polymer modified floor screeds; waterproof plasters for masonary and slurries.

Additional Information:

• Production Capacity: As per Requirement
• Delivery Time: QUICK
• Packaging Details: 20 KG

Usage	WORKABILITY
Form	LIQUID
Type Of Admixture	SNF BASED ADMIXTURE
Color	Dark Brown
Brand	FOSROC
Usage/Application	Construction
Packaging Type	Drum
Shelf Life	12 MONTH
Payment Terms	ADVANCE

To provide excellent acceleration of strength gain at early ages and major increases in strength at all ages by significantly reducing water demand in a concrete mix. „ Particularly suitable for precast concrete and other high early strength requirements. „ To significantly improve the workability of site mixed and precast concrete without increasing water demand. „ To provide improved durability by increasing ultimate strengths and reducing concrete permeability. „ In screeds it reduces the water content required to give suitable workability for placing and compaction.

Additional Information:

• Production Capacity: As per Requirement
• Delivery Time: QUICK
• Packaging Details: 220 KG

Category	Waterproofing Coating, Cementitious Waterproofing, Acrylic Based Polymer Coating
Shelf Life	12 MONTHS
Storage Condition	DRY CONDITIONS

Brushbond RFX is an high performance elastomeric cementitious coating used for waterproofi ng and to protect atmospherically exposed reinforced concrete structures from attack by acid gases, chloride ions, oxygen & water. Brushbond RFX is suitable for all types of structures including those in coastal environments. The product can be used on concrete, brick and blockwork substrates and is equally suitable for new and existing structures. The product is designed to reface and even out variations in concrete and masonry surfaces and bridge shrinkage cracks. It provides a seamless, fl exible waterproof coating suitable for water tanks, reservoirs, drainage culverts basements, roofs, toilets & wet areas. The product provides a tough durable water resistant coating which can withstand light pedestrian traffi c and also has excellent weather resistance for exterior applications.

Additional Information:

• Production Capacity: As per Requirement
• Delivery Time: QUICK
• Packaging Details: 20 KG