X
View Mobile Number83% Response Rate
Send Email

Products & Services

+View All

Fischer Bolt anchor

The cost-effective anchoring solution for high-performance requirements

  • Fischer Anchor Bolt FWA 16x105,140 Wedge / Mechanical Anchor
  • Fischer Anchor Bolt FWA 16x105,140 Wedge / Mechanical Anchor
  • Fischer Anchor Bolt FWA 16x105,140 Wedge / Mechanical Anchor
Fischer Anchor Bolt FWA 16x105,140 Wedge / Mechanical Anchor
Interested in this product?
Get Best Quote

Fischer Anchor Bolt FWA 16x105,140 Wedge / Mechanical Anchor

Rs 100 / PieceGet Latest Price

Minimum Order Quantity: 100 Piece

Size16x105mm,16x140mm
Product TypeAnchor Bolt
ShapeRound
FinishingGI Polished
Usage/ApplicationBuilding Materials
Drill Hole Diameter16mm
Anchor Length105mm,140mm
MaterialZinc-galvanised steel
BrandFischer Germany
Quantity Per Pack10 Piece
Threadmetric and imperial
Anchor Size16x105mm,16x140mm
ColorGI

The cost-effective fixation without approval - for use in non-cracked concrete.

Product Description

The fischer bolt anchor FWA is an economical solution for all applications where an approved fixation is not required. The FWA is offered in zinc-plated steel and hot-dip galvanised steel with an imperial thread. The bolt anchor can be used with two anchorage depths. The standard anchorage depth guarantees a high load-bearing capacity. This means that fewer fixing points and smaller anchor plates are required. The reduced anchorage depth reduces the drill hole depth. This saves time during the installation and increases flexibility.Advantages
  • The standard anchorage depth achieves high load-bearing capacities. This means that fewer fixing points and smaller anchor plates are required.
  • The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility.
  • Available with metric and imperial threads

View Complete Details

Yes, I am interested!

  • Fischer Threaded Rod Rgm
  • Fischer Threaded Rod Rgm
Fischer Threaded Rod Rgm
Interested in this product?
Get Best Quote

Fischer Threaded Rod Rgm

Rs 100 / PieceGet Latest Price

Minimum Order Quantity: 100 Piece

MaterialStainless Steel
Size10x130 mm
Usage/ApplicationIndustrial
ShapeRound
FinishingPolished
BrandFischer
Quantity Per Pack10 Piece
Material GradeSS316
Place Of OriginGermany

10x130 MM A4 Fischer Threaded Rod RGM-The fischer rod anchor RGM is produced from stainless steel. The anchor rod is a systems accessory for various fischer mortar cartridges or injection mortars. Application with pre-portioned mortar cartridges is especially cost-effective for individual fixings. During mounting with the resin capsule, set the fischer anchor rod RG M through rotating and hitting motions with a hammer drill. The capsule is destroyed during the setting process, which mixes and activates the mortar compound. During mounting with injection mortars, the anchor rod is pushed into the drill hole manually by lightly rotating it. The system is particularly suitable for cost-effective fixing of machines, steelwork constructions, and supporting feet in external areas.

Advantages:
The wide range of the RG M from M8 to M30 opens up a wide range of applications and therefore offers great flexibility. The wide range of approved steel types for RG M allows for use in all corrosion resistance classes and offers the best possible application safety.

Features:
Approved for anchorage in cracked and non-cracked concrete, solid brick masonry, perforated masonry, and aerated concrete in combination with various mortar cartridges or injection mortars. Anchor rod with oblique edge and hexagon for simple installation with pre-portioned injection cartridge. Stainless steel for outdoor use.

Applications:
Approved anchoring with Resin capsules RSB and RM II. Approved anchoring with Injection mortars FIS SB, FIS EM, FIS EB, FIS V, FIS VL, FIS GREEN and FIS P Plus.

Building materials:
In connection with the fischer resin capsules approved or suitable for cracked and non-cracked concrete. In connection with several fischer injection mortars approved or suitable for different building materials.

View Complete Details

Yes, I am interested!

  • Fischer Threaded Rod FIS AM
  • Fischer Threaded Rod FIS AM
Fischer Threaded Rod FIS AM
Interested in this product?
Get Best Quote

Fischer Threaded Rod FIS AM

Rs 100 / PieceGet Latest Price

Minimum Order Quantity: 100 Piece

MaterialZinc-Plated Steel
Size16x200 mm
Usage/ApplicationCommercial
ShapeRound
FinishingPolished
BrandFischer
Quantity Per Pack10 Piece
Surface FinishingGalvanized
Place Of OriginGermany

Fischer Threaded Rod FIS AM the variable fixing system for concrete / masonry, due to the high bond strength in connection with the injection motor FIS EM, the system achives a very high load level in cracked and non cracked concrete, resoluting in a safe application. Variable anchorage depths from 4x to 20x the threaded rod diameter allow for ideal adaptation to the load to be applied, and ensure an optimised installation time and use of materials. The low anchorage depth allows for use in thin base materials. The wedge range of approved steel type allows foe use in all corrosion resistance classes and offers maximum application safety.

Building materials approved for
 Concrete C20 / 25 to C50 / 60, Cracked and Non-crocked, Seismic conditions. Also suitable for Concrete C12 / 15. Natural stone with dense structure.

The fischer threaded rod FIS A is made of galvanized steel in steel grade 5.8. The threaded rod in a system component for the different fischer Injection mortars. In combination with the injection mortars, the fischer threaded rod is suitable and approved for every surface. For the maximum load capacity of the system, a thorough cleaning of the bore hole is recommended. The system of galvanized anchor rod in combination with fischer Injection mortars is suitable or approved for fastening in dry rooms indoors.

Benefits 
The fastening system, consisting of the threaded rod FIS A or the internal threaded anchor FIS E and one of the injection mortars FIS V, FIS VT or FIS P Plus, can be selected depending on the application requirements, making many possible applications possible.The application possibilities of approved threaded rods FIS A from M6 to M30 are countless.

Application
 Approved anchorings with Injection mortars FIS SB, FIS EM, FIS EB, FIS PM, FIS V, FIS VL, FIS P Plus and FIS GREENAnchorings without approval with Injection mortar FIS P.

View Complete Details

Yes, I am interested!

Fischer Threaded Rod Rgm A4
Interested in this product?
Get Best Quote

Fischer Threaded Rod Rgm A4

Rs 300 / PieceGet Latest Price

Minimum Order Quantity: 100 Piece

MaterialStainless Steel
Product TypeAnchor Bolt
ShapeRound
BrandFischer Germany
Quantity Per Pack10 Piece
Place Of OriginGermany

A4 Fischer Threaded Rod RGM - The fischer rod anchor RGM is produced from stainless steel. The anchor rod is a systems accessory for various fischer mortar cartridges or injection mortars. Application with pre-portioned mortar cartridges is especially cost-effective for individual fixings. During mounting with the resin capsule, set the fischer anchor rod RG M through rotating and hitting motions with a hammer drill. The capsule is destroyed during the setting process, which mixes and activates the mortar compound. During mounting with injection mortars, the anchor rod is pushed into the drill hole manually by lightly rotating it. The system is particularly suitable for cost-effective fixing of machines, steelwork constructions, and supporting feet in external areas.

Advantages:
The wide range of the RG M from M8 to M30 opens up a wide range of applications and therefore offers great flexibility. The wide range of approved steel types for RG M allows for use in all corrosion resistance classes and offers the best possible application safety.

Features:
Approved for anchorage in cracked and non-cracked concrete, solid brick masonry, perforated masonry, and aerated concrete in combination with various mortar cartridges or injection mortars. Anchor rod with oblique edge and hexagon for simple installation with pre-portioned injection cartridge. Stainless steel for outdoor use.

Applications:
Approved anchoring with Resin capsules RSB and RM II. Approved anchoring with Injection mortars FIS SB, FIS EM, FIS EB, FIS V, FIS VL, FIS GREEN and FIS P Plus.

Building materials:
In connection with the fischer resin capsules approved or suitable for cracked and non-cracked concrete. In connection with several fischer injection mortars approved or suitable for different building materials.

View Complete Details

Yes, I am interested!

  • 12x160mm A4 Fischer Threaded Rod RGM
  • 12x160mm A4 Fischer Threaded Rod RGM
12x160mm A4 Fischer Threaded Rod RGM
Interested in this product?
Get Best Quote

12x160mm A4 Fischer Threaded Rod RGM

Rs 1,000 / PieceGet Latest Price

Minimum Order Quantity: 100 Piece

MaterialStainless Steel
Size12x160mm
Product TypeAnchor Bolt
Usage/ApplicationIndustrial
ShapeRound
FinishingPolished
BrandFischer Germany
Quantity Per Pack10 Piece
Is It CustomisedNon Customisation
Rust ResistantYes
Thread TypeFull Thread

12 160mm Fischer Threaded Rod RGM The fischer rod anchor RGM is produced from stainless steel. The anchor rod is a systems accessory for various fischer mortar cartridges or injection mortars. Application with pre-portioned mortar cartridges is especially cost-effective for individual fixings. During mounting with the resin capsule, set the fischer anchor rod RG M through rotating and hitting motions with a hammer drill. The capsule is destroyed during the setting process, which mixes and activates the mortar compound. During mounting with injection mortars, the anchor rod is pushed into the drill hole manually by lightly rotating it. The system is particularly suitable for cost-effective fixing of machines, steelwork constructions, and supporting feet in external areas.

Advantages:
The wide range of the RG M from M8 to M30 opens up a wide range of applications and therefore offers great flexibility. The wide range of approved steel types for RG M allows for use in all corrosion resistance classes and offers the best possible application safety.

Features:
Approved for anchorage in cracked and non-cracked concrete, solid brick masonry, perforated masonry, and aerated concrete in combination with various mortar cartridges or injection mortars. Anchor rod with oblique edge and hexagon for simple installation with pre-portioned injection cartridge. Stainless steel for outdoor use.

Applications:
Approved anchoring with Resin capsules RSB and RM II. Approved anchoring with Injection mortars FIS SB, FIS EM, FIS EB, FIS V, FIS VL, FIS GREEN and FIS P Plus.

Building materials:
In connection with the fischer resin capsules approved or suitable for cracked and non-cracked concrete. In connection with several fischer injection mortars approved or suitable for different building materials.

View Complete Details

Yes, I am interested!

Get in touch with us

Reach Us

MK Metals & Technology1st Floor, Office No. 101, 102, Al Karim Trade Centre, M.G. Road, Opp. T19 Towers, Ranigunj, Secunderabad, Hyderabad-500003, Telangana, India

Murali Krishna Ch. (Proprietor)

View Mobile Number83% Call Response Rate

Send SMS
Send Email
Send Payment
Leave a Message, we will call you back!
Send your enquiry to this supplier
I agree to the terms and privacy policy

We Accept Online Payments

All Rights Reserved (Terms of Use)