M.K. Petro Products India Private Limited

Brand	Makphalt
Surface Of Application	Cement
Form	Paste
Color	Grey
Grade Standard	Industrial Grade
Country of Origin	Made in India
Applications	Joint Sealant

Mak Poly Seal is a two pack Polysulphide based Sealant with two available grades. After mixing two packs , the mixed material provides a strong and highly elastic sealant through cross linking process. Mak Poly Seal - Gun Grade, gun applied or non sag type for vertical and inclined expansion contraction joints AND Mak Poly Seal – Pour Grade- Pouring type for horizontal joints.

Standards : Complies with DIN 18540, US Fed. Spec 77-S-00227E and British Standard BS: 4254: 1983. It also conforms to IS 12118-1.

USES:

Mak Poly Seal - Gun Grade is used both in vertical and inclined expansion/contraction joints in all types of building and civil engineering constructions such as Retaining Walls, Water Retaining Structures, Underpasses, and Tunnels, Basements, Precast Concrete Elements, Bridges, High and Low rise buildings and wherever a permanently flexible seal is required.

Mak Poly Seal – Pour Grade is designed specially for runways, subways, rigid pavements etc. i.e. for horizontal expansion/contraction joints.

SPECIAL FEATURES:

1. Excellent adhesion to many substratas
2. High Movement Capability
3. Good Chemical resistance
4. Long Lasting elasticity
5. Easy to pour on horizontal joints with Mak Poly Seal Pouring grade.

COLOUR

Pack A is white and Pack B is black to dark brown in colour. 

MOVEMENT CAPACITY

Expansion/Contraction : 20 to 25%
Shear Movement : 20% 

JOINT DESING:

Minimum Joint depth : 10 mm
Maximum Joint width : 40 mm
Width : depth ration : 2:1 

APPLICATION

Surface Preparation : All surfaces must be clean, dry and free from any loose particles. Correct joints depths can be determined by inserting polyethylene foam or compressible board tightly into the joint, Where joints have been treated with fibre filler board they should be raked back to the required depth and a bond breaker tape be inserted. Protect surfaces with a masking tape. 

MIXING

Both Pack A & Pack B are premeasured. NO PART MIXING IS ALLOWED. Use Pack A: Pack B together. Use suitable instrument for mixing. Mix for 8-10 minutes or until smooth and homogeneous material results. Pour the mixed sealant into the joints without trapping or tool off with a spatula to a lightly concave profile. Remove masking tape.

TECHNICAL DATA 

Density : 1600 Kg/M3 ( Mixed material ) at 30 ±20 C
Shore ‘A’ Hardness : 20-25
Service temperature : 400 C to 800 C Application temperature : 5 0 C to 45 0 C Shrinkage : -1% 

CHEMICAL RESIST

Aviation fuels, Kerosene, Diesel, Petrol, Lubricating Oils, White Spirit, Dilute acid and Alkalies. 

PACKING : In 1 kg & 4 kg pack

STORAGE

1) Keep dry and away from extremes of heat 2) 12 months if kept unopened. 

MAK POLY SEAL PRIMER

Mak Poly Seal Primer is a single pack product and recommended for use to make the surface compatible with sulphide. It contains solvent & is highly inflammable. Naked flame should not be used nearby Available in 250 ml & 500 ml and one litre Pack.

COVERAGE : 8-10 M2 depending upon surface 

WARRANTY :

Mak Poly Seal is guaranteed against any manufacturing defect. No liability can be accepted by us as suggestions and recommendations that are laid here are based on our practical working experience only.

Additional Information:

• Delivery Time: 5 to 7 days

Application Method	brush, roller or airless gun
Packaging Size	20 Kg
Color	White
Area Of Application	Roofs
Packaging Type	Bucket
Brand	MAK PHALT

INSTA KOOL ROOFA HIGH ALBEDO ROOF COATING
Category: Retail RangeINSTA KOOL ROOF 104 is an innovative coating combining strength, light weight protection and integral insulation ideally designed for Thermal insulation of all sorts of concrete and steel structures like sheeting, sheds, roofs, porta cabins etc. It is a seamless, monolithic membrane impervious to adverse weathering and extreme temperature fluctuations.
INSTA KOOL ROOF 104 is available in white shade, but it could be tinted in different colors as far as white can be.
Storage: Store under cover, out of direct sunlight and protect from extremes of temperature. Failure to comply with the recommended storage conditions may result in premature deterioration of the product or packaging.
FEATURES10°C – 18°C thermal insulation All year round protection: In addition to reducing conductive heat transfer microspheres reflect away radiant energy or heat from the sun during the summer months and in winter they prevent radiant heat from leaving the building Reduce need for cooling-heating, save energy and save money Ideal for thermo-insulation for all sidewalls and roofs Effective protection from Heat, Cold, Sound, Humidity Ease of application by brush, roller or airless gun Environmentally friendly with long lasting waterproofing protection Very low odour, soap and water clean upLow applied cost per square foot / meter.
PRIMARY APPLICATIONS Durability : Long life cycle Aesthetics : Modern with unlimited hues Safety or slip resistance : Excellent adhesion Cost : Competitive Preparation Requirements : Minimal Special skills or tools required : None

Packaging Size	25 Kg
Packaging Type	Bucket
Surface of Application	Roof
Brand	Makphalt
Application Industry	Automotive
Material Compatibility	Plastic
Country of Origin	Made in India
Form	Paste

Mak Bond is a cold applied adhesive for fixing roofing felts and other insulating material on various surfaces. Mak Bond is recommended where the use of hot bitumen is either difficult or sprohibited.

Mak Bond is manufactured from select grades of bitumen, suitably blended with other raw materials, to achieve creamy appearance in semi liquid consistency.

Additional Information:

• Delivery Time: 2 TO 5 days