X
View Mobile Number 81% Response Rate
Send Email

What We Offer

+View All

Liquid Waterproofing Membranes

We have a full range of liquid waterproofing membranes for various applications depending on budget, lifespan and application area.

Acrylic Based Polymer Waterproofing Coating 1 Kg
Interested in this product?
Get Best Quote
BrandMAK PHALT
Usage/Applicationexternal and internal waterproofing
Packaging Size1 Kg
TypeAcrylic Based Polymer Waterproofing Coating
FeaturesWaterproof
Packaging TypeBucket
Country of OriginMade in India

INSTA COATACRYLIC BASED POLYMER COATING
Category: Retail RangeINSTA COAT is ready to use polymer for making a cement based polymer modified waterproofing slurry coating.It is applied to concrete and mortar structures to prevent from infiltration and dampness.
Primary Use: INSTA COAT is used for external and internal waterproofing,damp proofing,crack sealing,protection from chloride, plastering, swiming pools, terraces, podium slabs, basements,external and internal walls etc.
Directions For Use: Cement should be mixed with INSTA COAT in proportion of one part INSTA COAT and two parts of cement to form a slurry.The mixing of slurry should be done in container by adding the powder component to INSTA COAT and stirring with the slow speed mixer.Mixing should be done until the slurry is free from lumps.
Storage: Store under cover, out of direct sunlight and protect from extremes of temperature. Failure to comply with the recommended storage conditions may result in premature deterioration of the product or packaging.

View Complete Details

Yes, I am interested!

Mak Elastocryl EMB Acrylic Modified Bituminous Waterproof Coating
Interested in this product?
Get Best Quote

Mak Elastocryl EMB Acrylic Modified Bituminous Waterproof Coating

Rs 160 / KgGet Latest Price

Minimum Order Quantity: 100 Kg

Usage/ApplicationRoof,Terrace,Corridor Balcony,Bathrooms
Packaging Size20 kg
TypeAcrylic
ColorBlack
BrandMakphalt
Shelf Life12 month
FormLiquid
Weight20 kg
Elongation200- 400 %
FeaturesEasy to use
Packaging TypeBucket
Waterproofing TypeRoof,Terrace,Corridor Balcony,Bathrooms
CertificationISO BSIC
Is It FlammableImFlammable
Country of OriginMade in India

Mak Elastocryl EMB is high performance water-proofer liquid that dries to form a tough and flexible impermeable coating. It is a blend of tropical grade bitumen emulsion with modification using pure acrylic polymer.

Additional Information:

  • Production Capacity: As per requirement
  • Delivery Time: Within a week

View Complete Details

Yes, I am interested!

Bitumen Modified Polyurethane Based Elastomeric Liquid Waterproofing Coating
Interested in this product?
Get Best Quote
Usage/ApplicationWaterproofing
Packaging Size20 kg drums
TypesUrethanes
TypeWaterproofer
Packaging TypeDrum
ColorBlack
BrandMakphalt
Country of OriginMade in India
MaterialUrethane Prepolymers

Mak Elastothane EMB is a liquid applied polyurethane modified bituminous elastomeric membrane coating. Mak Elastothane EMB when applied on a surface, gives a continuous monolithic film which is rubbery and elastic in nature. The film is self-curing and cures by reaction with atmospheric moisture to give a tough elastomeric waterproof membrane.

Mak Elastothane EMB has good adhesion to a wide range of substrates such as concrete, brick, wood, slates, tiles, glass and metals etc. This is supplied also as a medium grade for roller, squeegee or brush application to horizontal as well as vertical surface.

Area of Application:

The high elasticity, excellent bond strength with concrete and other substrates, low water permeability of Mak Elastothane EMB makes it ideal membrane coating for a wide range of water / vapour proofing applications such as.

 Foundations, Basements, Lift pits.
 Car decks, Podiums.
 Roof, terraces, Balconies, Patios.
 Sewage works and Sunken Portions.

The excellent chemical resistance of Mak Elastothane EMB is used as a barrier coating for any part of the external or internal faces of the structures where high degree of waterproofing is required.

Application Procedure:

1. Clean the surface thoroughly with wire brush, remove all dust, dirt, foreign Particles, fungi, etc.
2. Allow surface to be completely dry. Do not apply Mak Elastothane EMB on damp surface. 3. All the cracks/voids shall be sealed with rubberized Mak Sealing Compound (ISI)
4. Apply Mak Elastothane Primer @ 8-10 Sqm/l on the entire surface to be treated. Alternatively, dilute Mak Elastothane EMB in the ratio of 1:1 with either Xylene or Toluene. Allow the primer to dry.
5. Apply Mak Elastothane EMB by brush or spray @ 1 kg/sqm on the entire surface and upto 300 mm high on parapet wall. Allow it to dry.
6. Apply second coat of Mak Elastothane EMB @ 1 kg/sqm to achieve total dry film thickness of 1.5mm.
7. Reinforcement of Non-woven Polyester or Glass fiber of 40gsm may be provided between the layers for improved tensile strength. 
8. Wearing course should done within 7 days.

Coverage:

Mak Elastothane PU Primer: 8-10 Sqm/l.
Mak Elastothane EMB: 1.2 kg/Sqm on a smooth surface will provide an adequate. film thickness of approx. 1 mm.
*Coverage rates may vary with surface texture and porosity.

Storage:

Store in cool and dry place. Lid of the container should be properly closed after use. In very cold conditions store inside. Do not attempt to thin. Once opened Mak Elastothane EMB will start to cure and a skin will form, even in the resealed cans. This can be removed if material is used within approximately one month.

Health and Safety:

 Keep away from sources of ignition
 Do not breathe vapour/spray
 Ensure good ventilation during application and drying
 In case of eye contact-wash with plenty of clean water and seek medical advice.
 Avoid prolonged skin contact wear suitable protective clothing and gloves while handling/applying.
 Remove from skin with mild solvent/hand cleanser and wash with warm soapy water.

Additional Information:

  • Production Capacity: As per requirement
  • Delivery Time: within a week

View Complete Details

Yes, I am interested!

  • Two Component Cement Waterproofing Coating
  • Two Component Cement Waterproofing Coating
Two Component Cement Waterproofing Coating
Interested in this product?
Get Best Quote

Two Component Cement Waterproofing Coating

Rs 75 / KgGet Latest Price

Minimum Order Quantity: 100 Kg

Product Brochure

Usage/ApplicationRoofs, Concrete
Packaging Size5 Ltr + 8kg
ColorGrey
BrandMakphalt
TypesAcrylic
FormLiquid, Powder
Country of OriginMade in India

MAK Crete 2K is a pre – packed two component polymer modified cementitious coating, which can be easily mixed on site and applied with brush or roller. This coating cures to form elastomeric waterproofing membrane with excellent adhesion to cementitious surfaces.

PRIMARY USE

MAK Crete 2K is best suitable for the waterproofing of water retaining structures like potable water tanks, reservoirs, canals, culverts, etc. It is suitable for use in foundations, basements, sunken areas and terraces also. It can also be used to treat efflorescence.

ADVANTAGES

• Withstands high positive hydrostatic pressure
• Excellent crack bridging capacity
•Excellent bonding to substrate such as concrete, masonry, etc.
• Very good bonding to damp surfaces.
• Food Grade - Can be used for treatment in potable water tanks.
• Breathable 

DIRECTION FOR USE

The surface to be coated should be free from all loose particles, dust, oil and laitance. All visible cracks should be opened in ‘V’ grove and filled with MAK SEALING COMPOUND,a single component crack filling compound. MAK Crete 2K comes in a pre- packed 2 component system which include 5Ltr liquid and 8 Kg powder. Mix both the components in a clean container using a power drill or manual mixer. Minimum 2 coats are advised of the mix at a consumption rate of 1.3 to 1.5 Kg per sqmt/ 2 coats.

TECHNICAL SPECIFICATIONS

Density: 1.6 gm / cm3
Toxicity: Non- Toxic
Cracking: No Cracking

COVERAGE

MAK Crete 2K will cover appx. 8-10 sq. mt / 2 coats/ [5 l + 8 Kg] Pack

STORAGE

Store under cover, out of direct sunlight and protect from extremes of temperature. Failure to comply with the recommended storage conditions may result in premature deterioration of the product or packaging. 

View Complete Details

Yes, I am interested!

Get in touch with us

Reach Us

M.K. Petro Products India Private LimitedMujehri Road, Balabhgarh, Sector 70, Faridabad-121004, Haryana, India

Rishabh Jaini (Managing Director)

View Mobile Number81% Call Response Rate

Send SMS
Send Email
Send Payment
Leave a Message, we will call you back!
Send your enquiry to this supplier
I agree to the terms and privacy policy

We Accept Online Payments

All Rights Reserved (Terms of Use)