Mm Aqua Technologies Limited

Size	600X300X150
Material	PP
Color	Natural
Product Type	V bar
Brand	MM Aqua
Wide	50 mm

V bar type Splash bars are manufactured out of a very modern extrusion line to ensure properly formed strengthening rib and perfect fitting V-bar support to bench tie.

V bar Splash fill is manufactured in option of rhombus and round punches

Turbosplash:-

Turbosplash fill is very suitable fill for brackish water quality and ambinent prone to algae growth and thus leading to clogging of fill. Turbosplash fill has baffel approx 50mm wide apart and thus do not clog. Spalsh actions makes the fill self cleaning adn thus provide longer life.

 

Material	P V C
Brand	MM Aqua
Model Name/Number	DV-270
Profile Depth	193 mm
Maximum Width	310 mm.
Material SS	304

Mist eliminator produced by MM Aqua are U V stabilised made out of virgin PVC in 3 different designs to meet following engineering application

• Textile units .
• Air washers / Air handling units.
• Paint Booth.
• Gas Turbine Air Intake Systems

Mist eliminator is an implement separator designed for horizontal gas flow. It is composed of sine curve shaped flow contours assembled with phase separating chambers .

The DV 270 droplet separator is a vane type separator for vertical flow. The gas flow charged with liquid droplets is directed through separator chambers which are designed for maximum effect on the gas flow. As a result of this configuration, inertial forces act on the droplets. The droplets impinge onto the profiles, where they form a liquid film which is subsequently drained off as a result of gravity. V-shaped impressions on the separator plates ensure that the liquid is drained off in the correct manner and returns to the gas flow.The DV 270 droplet separator is a vane type separator for vertical flow. The gas flow charged with liquid droplets is directed through separator chambers which are designed for maximum effect on the gas flow. As a result of this configuration, inertial forces act on the droplets. The droplets impinge onto the profiles, where they form a liquid film which is subsequently drained off as a result of gravity. V-shaped impressions on the separator plates ensure that the liquid is drained off in the correct manner and returns to the gas flow.

Applications :-

• Evaporators
• • Absorbers
• • Gas scrubbers
• • Desulphurization units
• • Gas coolers
• • Exhaust air treatment plants
• • Chemical

Weight	35kg/m3
Brand	MM Aqua
Flute Size	12 mm
Surface Of Exchange	243 m2/m3
Min Water Load	8 m3/m2 h
Standard Dimentions	L = 1200,W = 300,H = 300
Distance Of Support	Max. 1000 mm
Width Of Supports	50 mm
Material Thickness	0.20 mm
Materials	PVC
Drainage System	HVT /AT
Fields of Application	Cross-Flow And Counter-Flow Processes
Model	C 10.12

MM Aqua is into manufacture and marketing of various types of fill design suitable for different water quality. These fill Media are manufactured meeting CTI standards.

Fill Media manufacturted is of international quality and are prefered by leading consultants like NTPC, Fitchner, M N Dastur, Desein, TCE, EIL and NPC etc and is used by all leading Cooling Towers manufacturers.

Fill media manufacture by MM Aqua is exported to countries like Malaysia, Singapore, Thailand, Middle East, Canada, Australia, South Africa, Brazil, UK etc.

MM Aqua has big production capacity to meet large order Qty in required project schedule

Advantage of MM Aqua film fill:-

• Continuous Forming : Continuous forming process allows free flow of material during the stage of formation. Additional requirement of raw material is met hence no thinning takes place at crests & troughs.
• Double Edge Folding : MM Aqua’s manufacturing technique has the ability to fold the edges of the sheets providing stronger edges, which gives extra protection against water loads and shear force form beams. It also protects the fill from damages during installation & maintenance.
• Uniform Thickness : Provides uniform strength in fill sheets all along the fill surface.
• Micro structure : Unique shape and dimension provides long retention time and thus longer time for heat transfer.
• Longer Length : Allows the structural designer to reduce number of support beam thus inturn reduces the pressure drop and cost of construction.

In Conventional vacuum forming the sheets being formed needs anchoring both ends of the sheet, which results in stretching of material. Weak spots of lower tickness at crest and trough and at times also on flute surface are formed. Vacuum-formed sheets suffer from unpredictable thikness due to material stretching during the process. reduction in thickness is to the tune of 40%. However, by leaving one end free during continuous roll forming, MM Aqua avoids the undesirable results.

 

Weight	28kg/m3
Brand	MM Aqua
Flute Size	19 mm
Surface Of Exchange	148 m2/m3
Min Water Load	5 m3/m2 h
Standard Dimentions	L = 1200,W = 300,H = 300
Distance Of Support	Max. 1000 mm
Width Of Supports	50 mm
Material Thickness	0.25 mm
Materials	PVC
Drainage System	AT
Fields of Application	Cross-Flow And Counter-Flow Processes
Model	C 10.19

MM Aqua is into manufacture and marketing of various types of fill design suitable for different water quality. These fill Media are manufactured meeting CTI standards.

Fill Media manufacturted is of international quality and are prefered by leading consultants like NTPC, Fitchner, M N Dastur, Desein, TCE, EIL and NPC etc and is used by all leading Cooling Towers manufacturers.

Fill media manufacture by MM Aqua is exported to countries like Malaysia, Singapore, Thailand, Middle East, Canada, Australia, South Africa, Brazil, UK etc.

MM Aqua has big production capacity to meet large order Qty in required project schedule.

MM Aqua offers following type of fill media

Advantage of MM Aqua film fill :-

• Continuous Forming : Continuous forming process allows free flow of material during the stage of formation. Additional requirement of raw material is met hence no thinning takes place at crests & troughs.
• Double Edge Folding : MM Aqua’s manufacturing technique has the ability to fold the edges of the sheets providing stronger edges, which gives extra protection against water loads and shear force form beams. It also protects the fill from damages during installation & maintenance.
• Uniform Thickness : Provides uniform strength in fill sheets all along the fill surface.
• Micro structure : Unique shape and dimension provides long retention time and thus longer time for heat transfer.
• Longer Length : Allows the structural designer to reduce number of support beam thus inturn reduces the pressure drop and cost of construction

In Conventional vacuum forming the sheets being formed needs anchoring both ends of the sheet, which results in stretching of material. Weak spots of lower tickness at crest and trough and at times also on flute surface are formed. Vacuum-formed sheets suffer from unpredictable thikness due to material stretching during the process. reduction in thickness is to the tune of 40%. However, by leaving one end free during continuous roll forming, MM Aqua avoids the undesirable results