MM Aqua Technologies Limited

Weight	28kg/m3
Brand	MM Aqua
Flute Size	27 mm
Surface Of Exchange	112 m2/m3
Min Water Load	3 m3/m2 h
Standard Dimentions	L = 1200 W = 300 H = 300
Distance Of Support	Max. 1000 mm
Width Of Supports	50 mm
Material Thickness	0.40 mm
Materials	PVC
Field	Cross-flow And Counter-flow Processes
Model Number	C 10.27

MM Aqua is into manufacture and marketing of various types of fill design suitable for different water quality. These fill Media are manufactured meeting CTI standards.

Fill Media manufacturted is of international quality and are prefered by leading consultants like NTPC, Fitchner, M N Dastur, Desein, TCE, EIL and NPC etc and is used by all leading Cooling Towers manufacturers.

Fill media manufacture by MM Aqua is exported to countries like Malaysia, Singapore, Thailand, Middle East, Canada, Australia, South Africa, Brazil, UK etc.

MM Aqua has big production capacity to meet large order Qty in required project schedule.

MM Aqua offers following type of fill media.

Advantage of MM Aqua film fill :-

• Continuous Forming : Continuous forming process allows free flow of material during the stage of formation. Additional requirement of raw material is met hence no thinning takes place at crests & troughs.
• Double Edge Folding : MM Aqua’s manufacturing technique has the ability to fold the edges of the sheets providing stronger edges, which gives extra protection against water loads and shear force form beams. It also protects the fill from damages during installation & maintenance.
• Uniform Thickness : Provides uniform strength in fill sheets all along the fill surface.
• Micro structure : Unique shape and dimension provides long retention time and thus longer time for heat transfer.
• Longer Length : Allows the structural designer to reduce number of support beam thus inturn reduces the pressure drop and cost of construction

In Conventional vacuum forming the sheets being formed needs anchoring both ends of the sheet, which results in stretching of material. Weak spots of lower tickness at crest and trough and at times also on flute surface are formed. Vacuum-formed sheets suffer from unpredictable thikness due to material stretching during the process. reduction in thickness is to the tune of 40%. However, by leaving one end free during continuous roll forming, MM Aqua avoids the undesirable results

Material	PVC
Brand	MM Aqua
Specified Surface Area	157
Dimension mm	L=1200 mm,W=600 mm,H=600 mm
Maximum Width	100
Density	40 Kg/m3
Application	Nitrification,Saff Systems
Void Ratio	Less Then 97

PVC fill media for waste water treatment plants: This high quality PVC media named as BIOdek can be used in any wastewater treatment application requiring high surface area like SAFF, Trickling Filters (especially used for treating Distillery wastewater), Fixed Film Anaerobic Digester, Anaerobic Contact Filters, UASBR etc. The specific advantages of this media include very high surface area, chemical and weather resistant, double-edge folded, simple supporting, easy to install and much more.

For over fifty years, FIXED REACTORS, more commonly known as TRICKLING FILTERS, have been widely recognized around the world as a reliable method for the biological oxidation of organic wastes. Biological growth on the media surface of trickling filters converts dissolved organic waste material into byproducts like Carbon-dioxide, Nitrates, Nitrites, Water and Biological solids which are later removed by clarification.

Old effluent treatment plants generally used rock as the surface to induce such biological attached growth, but this system came with many disadvantages like heavy weight, elaborate support and other civil structure, poor wetting characteristics etc. To increase the efficiency of this process, while retaining the inherent advantages of attached growth system, various technical improvements such as solids contact, rotary distributor speed control, ventilation and the utilization of plastic media have been made.

Performance evaluation at treatment facilities show that at today’s high cost of energy, the highly efficient plastic media trickling filter is the most viable solution to a multitude of wastewater problems. Many of the several thousand municipal rock tricking filter plants in use today can greatly benefit by substituting plastic media. Alternatively, these plants could add modern TRICKLING FILTERS containing plastic media, in series or in parallel, to existing systems.

We have our structure framed keeping the Customer’s Interest in mind. We work on 3 L concept for economic solution and 3R concept for efficient solution.
3 L Concept:

Low Initial Capital Costs
Low Operating Costs
Low Energy Cost/Consumption
3 R Concept:

Low Initial Capital Costs
Low Operating Costs
Low Energy Cost/Consumption

Features of BIOdek

Aeration by Natural Drought
Simple Support System
Longer Retention Time
Low Construction Cost
Efficient Distribution System
Winter Time Operation and Ice Formation