Modern Communication Technology

MCOM400IRTU is a rugged cellular MODEM offering state-of-the-art mobile connectivity for machine to machine (M2M) applications. It works in intelligent mode. This device is suitable for data monitoring and operation from remote device. It supports three digital input, two digital output and one analog input, 1 pulse and one RS485/232, any MODBUS communication via serial port which works as Master. The minimum data rate from remote to central server is 20 sec.
Key Features:-·    Supports all types of 4G SIM cards.

·    The data transmission mode is 4G/3G/2G.

·     Supports all types of M2M SIMs.

·     Supports quad band auto switchable.

·      Small antennae included with the device. High gain antennae optional, in case of low connectivity.

·      One Serial Port for RS232 or RS485 for external device interface.

·     Three digital inputs, two digital outputs, one analog input and one pulse input.

·      Five LED indicators provide status for power, server connection, GPRS connection, SIM registration or network, 4G connectivity.

·       Phase AC input supply, worked within power supply range of 50 to 240V AC, 50 Hz.

·      Operating temperature: ???25 to 85 °C.

·      The metal enclosure can be mounted on a DIN-rail or on the wall.

·     Data acquisition on standard protocols, like MODBUS RTU.

·    Internal data storage: 512KB

·    Supports protocols like TCP/IP/ HTTP/FTP/MQTT for data communication to the server.

·    Auto reboot during a pre-set time of a day.

·    Industrial class design suitable for long time work applications.

·     Facility to store mobile numbers for authorization of remote configuration.

·    Configuration of device parameters via serial port or remotely by SMS.

·    Communication of data to server on specific events or on configured intervals
Storing and forwarding of data in case of communication failures.
·  Standards: GSM/GPRS/EDGE/UMTS/HSPA/FDD LTE

·  GPRS/EDGE: 850/900/1800/1900 MHz

·  HSUPA: 900/2100 or 850/1900 MHz optional, DL/UL 7.2/5.76 Mbps, fallback to 2G.

·  HSPA+: 850/900/1900/2100 or 900/2100 or 850/1900 MHz optional, DL/UL 14.4/5.76 Mbps, fallback to 2G, FDD LTE: 800/900/1800/2100/2600 MHz or 700MHz (B17 or B13) optional, DL/UL 100/50 Mbps, fallback to 3G/2G.

·  SIM: 1 x (3V & 1.8V)

·   Antenna Interface: SMA Female, 50 ohms impedance.32-bit high performance microcontroller MCU
·   32-bit high performance microcontroller MCU

Additional Information:

• Production Capacity: 10000

MCOM300TH is a rugged cellular MODEM with built-in temperature and humidity sensors, with seven-segment display. It works in intelligent mode. This device is suitable for temp. and humidity monitoring from remote location. The device is suitable for monitoring room temperature and humidity, locally as well as remotely. The minimum data rate from remote to central server is 20 sec.
Key Features:-
·  Supports all types of 4G SIM cards.

· The data transmission mode is 4G/3G/2G.

·  Supports all types of M2M SIMs.

·   Supports quad band auto switchable.

·   Small antenna included with the device. High gain antenna optional, in case of low connectivity.

·   Five LED indicators provide status for power, server connection, GPRS connection, SIM registration or network, 4G connectivity.

·  Temperature and humidity sensors built-in

·    In-built 7-segement for local data display.

·   Phase AC input supply, worked within power supply range of 50 to 240V AC, 50 Hz.

·   Operating temperature: ???25 to 85 °C.

·   The ABS enclosure can be mounted on a wall.

·    Data acquisition on standard protocols, like MODBUS RTU.

·   Internal data storage: 16MB

·    Supports protocols like TCP/IP/ HTTP/FTP/MQTT for data communication to the server.

·    Auto reboot during a pre-set time of a day.

·    Industrial class design suitable for long time work applications.

·    Facility to store mobile numbers for authorization of remote configuration.

·    Configuration of device parameters via serial port or remotely by SMS.

·  Communication of data to server on specific events or on configured intervals

·     Storing and forwarding of data in case of communication failures
Specifications:-

·     Standards: GSM/GPRS/EDGE/UMTS/HSPA/FDD LTE

·    GPRS/EDGE: 850/900/1800/1900 MHz

·   HSUPA: 900/2100 or 850/1900 MHz optional, DL/UL 7.2/5.76 Mbps, fallback to 2G.

·   HSPA+: 850/900/1900/2100 or 900/2100 or 850/1900 MHz optional, DL/UL 14.4/5.76 Mbps, fallback to 2G, FDD LTE: 800/900/1800/2100/2600 MHz or 700MHz (B17 or B13) optional, DL/UL 100/50 Mbps, fallback to 3G/2G.

·    SIM: 1 x (3V & 1.8V)

·   Antenna Interface: SMA Female, 50 ohms impedance.32-bit high performance microcontroller MCU

·   32-bit high performance microcontroller MCU

Additional Information:

• Production Capacity: 10000

MCOM301TRTU is a rugged cellular MODEM offering state-of-the-art mobile connectivity for machine to machine (M2M) applications. It is the updated version of MCOM300TRTU with remote serial programming and dual serial port setup. It also works in transparent mode. This device is suitable for data monitoring and operation from remote device, and for remote PLC or any MODBUS communication via serial port. The minimum data rate from remote to central server is 5 sec.

 Key Features:-

·         Supports all types of 4G SIM cards except Jio.

·         The data transmission mode is 2G/GPRS/EDGE.

·         Supports all types of M2M SIMs.

·         Supports quad band auto switchable.

·         Small antennae included with the device. High gain antennae optional, in case of low connectivity.

·         Two Serial Port for RS232 and RS485 for external device interface.

·         Four LED indicators provide status for power, server connection, GPRS connection, SIM registration or network.

·         Phase AC input supply, worked within power supply range of 50 to 240V AC, 50 Hz.

·         Operating temperature: ???25 to 85 °C.

·         The metal enclosure can be mounted on a DIN-rail or on the wall.

·         Supports MODBUS/RTU.

·         Auto reboot during a pre-set time of a day.

·         Industrial class design suitable for long time work applications.

·         Facility to store mobile numbers for authorization of remote configuration.

·         Configuration of device parameters via serial port or remotely by SMS.

·         Handshaking software is provided at central server for device-SCADA/web application communication.

 Specifications:-

Cellular Interface

• Standards: GSM/GPRS
•  GPRS/EDGE: 850/900/1800/1900 MHz
•   SIM: 1 x (3V & 1.8V)
•  Antenna Interface: SMA Female, 50 ohms impedance.

32-bit high performance microcontroller MCU

·         PLC/MODBUS device data monitoring and controlling

·         Energy Monitoring, e.g. Electricity, Solar, Wind, etc.

·         Water Metering/Flow Meter

Additional Information:

• Production Capacity: 10000
• Delivery Time: month

·      Single SIM port with support of all major telecom operators

·         2 x Digital/Analog Inputs/Outputs (configurable)

·         LTE Cat 4 with speeds up to 150 Mbps

·         Auto switchable network interface: 4G/3G/2G

·         Ethernet interface

·         Compact size, easy integration

·         Wide range of power supply voltages (9-30V)

Applications:

·         Remote access of any system via LAN

·         Remote PLC programming via Ethernet

·         M2M communication from remote locations

Additional Information:

• Production Capacity: 10000

The MCOM302IO provides 13 channels for digital input, 8 channels for digital output and 8 channels for Analog input. The MCOM302IO supports source-type output, input is sink-type.Support RS485Modbus RTUprotocol for communication and work as slave device. Provide DIP switch for Modbus device id and Baud rate selection.

Features:

• Source-type Digital Outputs
• 8-channel relays output
• Sink-type Digital Inputs
• 8-channel Single-ended for Analog input.
• Resolution: 12 bitsfor Analog input and output
• 3-Pluse counter.
• Voltage Inputs and Current Inputs
•  Watchdog
• DIP Switch for device configuration
• Cost-effective
• Wide Operating Temperature Range: -25 °C ~ +75 °C

Applications:

• Industrial Automation
• Industrial Machinery
• Building Automation
• Food and Beverage Systems
• Semiconductor Fabrication

Additional Information:

• Production Capacity: 10000

MCOMMWLCDis GSMbased Starter with automatic water level controller,automatic water-level controller for overhead tanks that switches on/off the pump motor when water in the tank goes below/above.the device works for 2 Phase/ 3Phase up to 80 Hp.it can be connect to any type of Starter. Eg. DOL and Star delta etc.  Through MCOMMWLCDcan operate Pump from anywhereor Local or WLCD(overhead tanks level demand).
Features
built-in 32-bit ARM Micro controller

·         built-in Watchdog

·         built-inwater level controller

·          Current Range / HP: 3 – 99 Amps/1-80 Hp

·         built-in seven segment display: Digital Voltmeter 180 – 520 V and Digital Ammeter 3 – 99 Amp, GSM Network availability in Percentage.

·         Push button for Auto and Manual selection

·         Three Mode operations: -Auto (online),WLCD (overhead tanks level demand), Manual (local) 

Manual Mode: - Users can operate pump through local ON/OFF push button with Protections.

WLCD Mode: -Here is a simple, automatic water-level controller for overhead tanks that switches on/off the pump motor when water in the tank goes below/above the minimum/maximum level. The water level is sensed by two floats to operate the switches for controlling the pump motor.

Auto Mode:Users can operate pump through Mobile (SMS/Call/Web and Mobile App)

·         Start / Stop / Monitor / Set your motor from any phone

·         Real time IoT based data monitoring web and mobile app for pump status.

·         Talks Online in Local Language

·         Four Authorized users can be added

·         SMS and online Realtime reports

·         Online Parameter Settings by SMS and web /mobile App.

·         Call Auto Lift and Auto Cut

·         Hour Meter, Total Hour

·         MeterSite Settable Four Digit Password with SIM Tracking

·         Missed Call/SMSand web & Mobile app based ON / OFF pump operation. 

·         Web Based Android Application

·         Receive Phone Call for Fault & Power Return (Call Back)

·    

Additional Information:

• Production Capacity: 10000

Features:

·         Supports Single Phase, Suitable for Sump to Tank set up (Underground or ground level tank to Overhead tank set up).

·         Has LED indications for Power ON and PUMP ON

·         Has two LED indicationsfor UpperTank levelLow and Full.

·         Has two LED indicationsforLower Tank  level Low and  Full.

·         Easy Installation

·         Has MANUAL mode and AUTO mode functions. In AUTO mode, AUTO ON and AUTO OFF operation occurs.

·         Low Maintenance

·         Fully Automatic Water Level Controller with level sensors By MCOM

·         With auto- manual control,

Additional Information:

• Production Capacity: 10000