Mohit Scientific Works

Student Spirometer MSW-1001SS: 6 ltr. Capacity with chain compensates counter balance to flat through pulley calibrated to denote volume inlet & outlet tubes stainless steel chamber with corrugated rubber tube and mouth piece.

Additional Information:

• Production Capacity: 100
• Delivery Time: 7
• Packaging Details: Card Board Box export worthy.

Orbital Shaking Incubator MSW-104OSI: Standard double wall construction. Outer chamber made out of mild steel finished in stoving enamel paint. Inner-chamber made of stainless steel sheet. The double door is provided with double glass full view window. The interchangeable platform has been provided. Temp. Range 5^oC above ambient to 60^oC +2^oC is controlled by a solid electronic controller. Variable speed control regulator controls the speed up to 200rpm. Supplied complete to work on 220 V AC 50 Hz single phase. Capacity 16x500ml. Conical flasks. a)

·         Same as above but the temp. Range 10^oC to 50^oC with the light arrangement.

Additional Information:

• Production Capacity: 50
• Delivery Time: 10
• Packaging Details: Wooden Box export worthy.

Hot Air Oven MSW-112HO: We are offering hot air oven, nu-101 hot air ovens (memmert type) (three side heating elements) standard double wall fabrication. Inner chamber made of richly anodized aluminium or highly polished stainless steel sheet. Exterior fabricated out of thick mild steel sheet duly finished in stove enamel off-white paint or paste mat finish colour combinations. The gap between the walls is filled with special grade glass-wool for heat insulation. Inner chamber is ribbed for placing shelves at convenient levels. Provided with two or three removable shelves. Special elegant door closing device has been provided. nichrome wire heating elements -provided on three sides attain quick and uniform heating in range of 50^oc to 250^oc + 1^oc controlled by capillary type thermostat. L-shaped thermometer is built-in type. Control panel is provided with selector switch of high or low rates of power, thermostat control knob and indicators for mains & thermostat. Supplied with cord and plug. The equipment is suitable to operate on 220 vac 50 Hz single phase.

Chamber Size (in mms inches) no. Of shelves

· 300 x 300 x 300 (12" x 12" x 12" ) 2

· 350 x 350 x 350 (14" x 14" x 14") 2

· 400 x 400 x 400 (16" x 16" x 16") 2

· 450 x 450 x 450 (18" x 18" x 18") 2

· 600 x 450 x 450 (24" x 18" x 18") 2

· 600 x 600 x 600 (24" x 24" x 24") 2

· 900 x 600 x 450 (36" x 24" x 18") 2

· 900 x 600 x 600 (36" x 24" x 24") 2

· 900 x 900 x 900 (36" x 36" x 36") 2

Optional

· Air circulating fan.

· Timer 0-24 hours

· Digital temp. Indicator-cum- controller.

· Imported thermostat “ego” “jumo” german with the accuracy of ±1^oc.

· Digital temp. Indicator.

Additional Information:

• Production Capacity: 100
• Delivery Time: 7
• Packaging Details: Wooden Box export worthy.

Additional Information:

• Production Capacity: 50
• Delivery Time: 15 days
• Packaging Details: Wooden Box export worthy.

BOD Incubator MSW-102IB: Designed for low temperature incubation and routine determination of Bio-Chemical Oxygen Demand (B.O.D.). Double wall construction. Inner chamber made of richly anodized aluminium or highly polished stainless steel sheet with self supports for wide range of shelf spacing. Supplied with two/three removable perforated shelves. Exterior made out of thick mild steel sheet duly finished in white stoving enable paint or pastel mat finish colour combinations. Outer double wall door is provided with magnetic gasket and lock & key arrangement. Inner door made out of clear acrylic sheet allowing inspection of material in the chamber without disturbing the chamber temperature. Door operated inner illumination has been provided. The gap between walls of equipment is filled with glass wool for temp. insulation. The cabinet is mounted on castors. Temperature is controlled by a sensitive thermostat from 5^oC to 50^oC + 1^oC. For lower temp. Working a standard cooling unit with a sealed compressor with protective devices has been provided below the chamber for safe and efficient working. Heating arrangement has been made within the chamber for higher temp. Working. The temp. Can be regulated within the range by means of a high precision double action thermoregulator. Inner air circulating system is provided to achieve unit form temperature in the whole chamber. A control panel is provided with various indicators, on-off switch, L-shaped thermometer. Supplied with cord and plug etc. equipment is workable on 220 V AC 50 Hz single phase.

Additional Information:

• Production Capacity: 50
• Delivery Time: 10
• Packaging Details: Wooden Box export worthy.

Vertical Autoclave MSW-119VA: A versatile, electrically heated sterilizer under the saturated steam of Adjustable pressure of 10 to 20 psi. Double walled construction with boiler & steam jacket made of thick stainless steel and gap is filled with high-grade glass wool to bring the temp. the loss to a minimal level. The outer chamber is made out of thick mild steel. The lid is made of thick stainless steel plate (jointless) or gunmetal plate and can be sealed by a jointless neoprene rubber gasket by wing nuts through hinged bolts by engaging slotted lugs on the rim of the cover. Provided with dial pressure gauge, air/ steam release cock, spring loaded safety valve adjustable to any required point from 10 psi to 20 psi with accuracy + 3 psi. A drain cock has also been provided. A double safety valve has also been provided along with the inlet. Supplied complete but without dressing bins.

Additional Information:

• Production Capacity: 100
• Delivery Time: 10
• Packaging Details: Wooden Box export worthy.

Double Wall Rectangular Water Bath MSW-106WB: Standard double wall construction, the inner being of the stainless steel outer of m.s. duly stoving paint finish and gap filled for temp. Insulation with glass wool. Top cover with 75 mm (3") holes with concentric rings. Temp. range 5^oC above ambient to 95^oC type element with the accuracy of + 1^oC. Supplied complete with plug & cord. The panel provided with pilot lamps, thermostat control knob etc.

Additional Information:

• Production Capacity: 100
• Delivery Time: 7
• Packaging Details: Card Board Box export worthy.

Single Wall Rectangular Water Bath MSW-107WB: Body made out of thick stainless steel, top made out of chrome plated sheet concentric rings to cover 3" dia holes are provided. Heating elements have an automatic cut-off device which operates when the bath gets dried. Equipment working on 220V AC 50Hz single phase.

Additional Information:

• Production Capacity: 100
• Delivery Time: 7
• Packaging Details: Card Board Box export worthy.

Serological Water Bath MSW-108SWB: Double wall construction, inner being made out of highly polished thick stainless steel and outer made out of thick mild steel sheet finished in stoving white enamel paint or staple mat colour combinations. The gap is filled with special glass wool for temp. Insulation. The bath is provided with the drain cock to easily drain out the water and cleans the chamber when required. A pyramidal shaped cover is provided. Immersion type heating elements are fitted at bottom. Temp. Range 5^oC above ambient to 80^oC with accuracy + 0.5^oC to 1^oC is controlled by capillary thermostat regulated by a graduated knob on the panel, which is also provided with pilot lamp etc. The equipment is workable on 220V AC 50Hz single phase. The baths are supplied without racks, thermometer and stirring arrangement.

Additional Information:

• Production Capacity: 100
• Delivery Time: 7
• Packaging Details: Card Board Box export worthy.

Paraffin Water Bath MSW-109PWB: Construction as per model NU-110 but with glass windows on both opposite sides, for observation. Temp. Controlled by mercury contact thermometer with a sensitivity of 0.2 ^oC. Suitable for precision laboratory activities requiring constant temp. With high degree of accuracy. Complete with stirrer with speed control regulator workable on 220V AC 50 Hz single phase. but provided with cups & sleeves for glass tubes.

Additional Information:

• Production Capacity: 100
• Delivery Time: 7
• Packaging Details: Card Board Box export worthy.

Additional Information:

• Production Capacity: 20
• Delivery Time: 15
• Packaging Details: Wooden Box export worthy.

Wrist Action Shaker MSW-116WAS: Heavy cast-iron base with the sturdy construction with two side arms for holding flasks. A heavy-duty fractional motor with variable speed through continuously variable speed controller is provided. The holders can hold flasks of capacity 100 to 1000ml. Supplied complete with cord & plug etc. to work on 220V AC 50 Hz single phase. Speed 80-280 oscillations per minute.

Additional Information:

• Production Capacity: 100
• Delivery Time: 7
• Packaging Details: Card Board Box export worthy.

Additional Information:

• Production Capacity: 100
• Delivery Time: 7 days
• Packaging Details: Cardboard box export worthy.

Compact rectangular body made of mild steel duly powder coated, with clear acrylic lockable lid, continuously variable speed regulator, safety fuse, pilot lamp etc. provided on the streamlined panel. The maximum speed of 4000 RPM. A special safety mode is provided that when the lid is open instrument will stop working. With plug-cord to work on 220 VAC 50 Hz single phase.
Capacity (ml.) : 4 x 50, 6 x 50, 8 x 15, 12 x 15, 16 x 15 ANY ONE
Optional :
1. Automatic 0-60 minutes Timer.
2. Speedometer Digital.
3. Maximum speed 10000 can also be provided.

Additional Information:

• Item Code: GLE01
• Pay Mode Terms: Other

Bacteriological Incubator MSW-101BI: Standard double wall fabrication. Inner chamber made out of richly anodized aluminum or highly polished stainless steel sheet and outer made out of thick mild steel sheet finished in white stoving enamel paint or mat finished pastel color combinations. The gap is filled with special glass wool for temp. Insulation. Double wall door with double window for observation in the chamber. Temperature range 5^oC above ambient to 80^oC + 2^oC controlled by a thermostat. L- the Shaped thermometer is provided for taking temp. Readings. The panel is provided with pilot lamps for mains & heaters, On-off switch, temp. Control knob etc. The equipment is workable on 220 VAC 50 Hz single phases. Heating is achieved from 3 sides. Perforated removable shelves also provided.

Chamber Size (in mms inches) no. Of shelves

·         300 x 300 x 300 (12" x 12" x 12”) 2

·         350 x 350 x 350 (14" x 14" x 14") 2

·         400 x 400 x 400 (16" x 16" x 16") 2

·         450 x 450 x 450 (18" x 18" x 18") 2

·         600 x 450 x 450 (24" x 18" x 18") 2

·         600 x 600 x 600 (24" x 24" x 24") 2

·         900 x 600 x 450 (36" x 24" x 18") 2

·         900 x 600 x 600 (36" x 24" x 24") 2

·         900 x 900 x 900 (36" x 36" x 36") 2

Optional 

·         Air circulating fan.

·         Timer 0-24 hours

·         Digital temp. Indicator-cum- controller.

·         Imported thermostat “ego” “jumo” german with the accuracy of ±1^oc.

·         Digital temp. Indicator.

Additional Information:

• Production Capacity: 100
• Delivery Time: 10
• Packaging Details: Wooden Box export worthy.

Clinical Centrifuge MSW-105CC: Electrically operated, dome type, sturdy, stable heavy body with resiliently mounted motor working on 220V AC 50 Hz single phase for vibration free performance with built-in 5-speed regulator and a non- removable swing-out rotor. Complete with tube carriers. Maximum speed of 3500 RPM. Neatly finished in stoving enamel paint.

Additional Information:

• Production Capacity: 100
• Delivery Time: 7
• Packaging Details: Card Board Box export worthy.

Kahn Shaker MSW-115KS: Designed for shaking khan racks, bottles, and flasks of different sizes by adjusting compartments. Fitted with the heavy-duty motor to work on 220 V AC 50 Hz V A single phase. The rate of motion is Adjustable mechanically by belt tension. Speed is fixed in the same models to approximately 275 or variable as detailed below.

Additional Information:

• Production Capacity: 100
• Delivery Time: 5

Vacuum Oven MSW-113VO: Double walled construction. Inner round chamber made out of stain- less steel sheet. Exterior made out of mild steel duly finished in stoving enamel white paint. Gap between the two filled with glass wool for temp. Insulation. Temp. Range 50^oC to 150^oC + 3^oC. The body capable of withstanding vacuum of 760mm hg. Complete with temp. Regulator, indicator lamp, on-off switch, cord plug etc. Workable on 220 V AC 50 Hz single phase. Supplied without vacuum pump.

Additional Information:

• Production Capacity: 50
• Delivery Time: 15
• Packaging Details: Wooden Box export worthy.

Magnetic Stirrer MSW-121MS: Compact stirring device utilizing a rotating magnetic field applied from below the container. The stirring is accomplished by a Teflon rotor placed in the liquid to be stirred. Complete with pilot lamp, plug cord, continuously variable speed regulator The body is made of mild steel duly finished in stoving enamel and mounted with a stainless steel top which serves as a hot plate. Stirring and heating units are properly insulated. In the model with heating system temp. is controlled by an energy regulator. An electronic speed controller is also provided. The equipment works on 220V AC 50 HZ single phase.

Additional Information:

• Production Capacity: 100
• Delivery Time: 7
• Packaging Details: Card Board Box export worthy.

The plant consists of One cation Exchanger column containing cation exchange resin. One anion exchanger column containing anion exchanger Resin. The plant is mounted on M.S. stand with the assembly of valves and tubing. One conductivity meter with a cell to monitor the ionized solids of purified water and thus control the functions of de-mineralization. The meter is direct reading having reading heavy range 0.40 microns/cm.

• Capacity 50 liters.
• Capacity 75 liters.
• Capacity 100litre.

Optional Accessories:

• Digital D.O.Meter.

Additional Information:

• Item Code: GLE02
• Pay Mode Terms: Other

Hot Plates MSW-114HP: We are offering hot plate laboratory hot plates are available in round and rectangular shapes. Body is fabricated out of thick mild steel sheet duly finished in stoving enamel paint. The hot plate made of cast iron, nicely & precisely machined & smoothed duly finished in heat resistant black paint is firmly mounted on the body. Heavy-duty heating elements are securely layed under the plate to operate on 220 v ac 50 hz single phase. Temp. Is controlled by a three-heat rotary switch along with an indicator lamp for the mains and cord & plug. a) hot plate : (round) single specifications as above with 20 cm.(8”) dia. Molded top. b) hot plate (round) double as above but with two plates of 20 cm (8”) dia. Having independent pilot lamps & switches.

Additional Information:

• Production Capacity: 100
• Delivery Time: 7
• Packaging Details: Card Board Box export worthy.

VDRL Rotary Shaker MSW-117VDRL: Suitable for VDRL and other agglutination tests, blood grouping tests and for mixing of solutions in small flasks, beakers or bottles. Body made of sturdy mild steel sheet duly finished in stoving enamel paint. Tray type platform size 300x300 mm can take cavity slides, bottles, flasks etc. for shaking at a fixed speed, with the help of spring wires. Standard fixed speed 180 RPM An automatic 60 minutes timer can be provided against extra cost as optional by which shaking duration can be set. To work on 220V AC 50 Hz single phase.

Additional Information:

• Production Capacity: 100
• Delivery Time: 7
• Packaging Details: Card Board Box export worthy.

Platform Rotary Shaker MSW-118PRS: Body made out of thick mild steel sheet finished in stoving enamel paint heavy-duty motors of suitable capacities are provided for long time, continuous operation. Fixed speed and variable speed models are offered. Platform provided with rubber discs or wire partitions to hold flasks. To work on 220V AC to 50Hz single phase.

Additional Information:

• Production Capacity: 100
• Delivery Time: 7
• Packaging Details: Card Board Box export worthy.

Laminar Air Flow Cabinet MSW-120LAF: Laminar flow principle involves double filtration of air through coarse pre-filters (up to 5 microns) and Hepa filter (down to 0.3 microns) for filtration of biological and particulate contaminants. A constant uni-directional air flow is drawn from the atmosphere and passed through pre and HEPA filters on the work surface. Fabricated out of reinforced ply board which is clad in from outside laminated sheet and inner exposed areas are finished in epoxy paint. Table top covered with the non-glaring laminated sheet or stainless steel sheet (optional). Side panels are fixed and are made out transparent acrylic sheet. The front door is the folding type and made of the thick acrylic sheet. (Optional) The stand is built in type or detachable. Blower unit has AU or equivalent motor and is dynamically balanced with minimal sound & vibration level. Fluorescent lighting is also provided. A suitable UV tube is provided for sterilization. An acrylic block type manometer to measure static pressure in the chamber has been installed. Two-way gas tap for the gas line has also been provided.

Additional Information:

• Production Capacity: 20
• Delivery Time: 15
• Packaging Details: Wooden Box export worthy.

Melting Point Apparatus MSW-122MPA: A metallic heating block is provided with holes to receive three capillary tubes and a stem type thermometer. The body is finished in stoving enamel paint. The apparatus can measure melting point upto 350^oC. The block is heated by superior heating elements and temp. is controlled by a heating regulator. A shadowless lamp has been provided to illuminate the capillaries and focusable magnifier facilitates in observations. The whole unit is housed in an aluminum cast casing and provided with a control panel. Provided with indicator lamps, heat energy regulator, on-off switch, cord-plug etc. the equipment is to work on 220 V AC 50 Hz single phase. Supplied without thermometer & capillaries.

Additional Information:

• Production Capacity: 10
• Delivery Time: 15
• Packaging Details: Wooden Box export worthy.

Additional Information:

• Production Capacity: 100
• Delivery Time: 7
• Packaging Details: Wooden Box export worthy.

Soxhlet Extraction Unit MSW-125SE: Standard mild steel body and upright fittings. Body finished in stove heating paint and other parts duly chrome plated. Housing provided with heating mantels for surface temp. upto 300^oC. Provided individual on-off switches & pilot lamps.

Additional Information:

• Production Capacity: 100
• Delivery Time: 7
• Packaging Details: Card Board Box export worthy.

Tissue Flotation Bath MSW-115TF: Tissue Flotation Bath is useful to float tissue wax sections to flatten for the staining process. Double Walled chamber, inner made of black anodized aluminum and an outer wall made of mild steel sheet duly painted. The gap between two insulated with glass wool.

Temperature ambient to 700C ± 20C controlled by a thermostat. It is supplied complete with Pilot Lamp, Temperature Control Knob, and Cord-Plug etc. To work on 220V AC 50Hz single phase.

Chamber Size: Diameter 225 mm, Depth 70 mm, Rim 40 mm.

Additional Information:

• Production Capacity: 100
• Delivery Time: 7
• Packaging Details: Card Board Box export worthy.

Freeze Dryer (Lyophilizer) MSW-101FDL covers a range of application from multi-user centralized laboratory applications, pilot plant determination work etc. It is a free-standing, castor mounted unit with a fully accessible cabinet. It is supplied with a powerful vacuum pump. Standard Laboratory Model with Hermetically sealed reputed make compressor gives temperature upto -40°C. Condenser trap is provided at nonmagnetic stainless steel dished bottom for complete effluent removal.

Refrigerant coils made of copper are heavily insulated for maximum efficiency. Temperature is adjustable up to -40°C and is maintained automatically by digital temp. Controller. Vacuum drum having 22.8 cm diameter and 25.4 cm height is made up of nonmagnetic stainless steel with plexiglass top cover and incorporates 6 / 8 / 12 quick seal valves/ports for manifold drying having 12.5 mm outer diameter provided for quick drying. Aesthetically designed cabinet in steel gives a pleasant look. Suitable to work on 220V AC 50Hz supply.

·         Capacity: - 3 liters, 5 liters, 10 liters.

·         Optional Accessories: - Voltage Stabilizer - 5 KVA.

·         Temperature range: – 80ºC

Additional Information:

• Production Capacity: 10
• Delivery Time: 15
• Packaging Details: Wooden Box export worthy.

Plant Growth Chamber MSW-1004PG: Plant Growth Chamber in order to serve pharmaceutical, nutraceutical and other industries where precise environment control is needed. At our manufacturing unit, the offered chamber is carefully designed under adaptable conditions so that this can be ideally used for botanical and agricultural research applications such as studying and researching about seed germination, plant pathology and much more. Offered chamber featured with automatic timer, sliding glass doors, lighting system, etc. is known for accommodating less space in the room. We offer the Plant Growth Chamber available in various advanced specifications to our customer’s at the most affordable price range.

Additional Information:

• Production Capacity: 50
• Delivery Time: 15 days
• Packaging Details: Wooden Box export worthy.

Vacuum Rotary Evaporator (Buchi Type) MSW-VRE  is used for vacuum distillation of solvent at high and low temperature. Having non-sparking motor reduces the risk of fire at variable speed for the variety of use (90 RPM to 240 RPM). It permits continuous feed of solvent into evaporating pear shape flask and distillation under control atmosphere. All glass parts are easily replaceable. It is supplied with 1 Lt. Evaporator and receiving flask. Steam duct a condenser, inlet feed 2 clamps, a dry unit wire cord and Plug to work on 220 volts AC do fit with quick action jack. 

Capacity

·         Flask-Capacity 1 Ltr

·         Flask-Capacity 3 Ltrs

·         Flask-Capacity 5 Ltrs

Optional Accessories

·         Water Bath for 1 Ltrs. Capacity

·         Digital RPM Meter at an Extra Cost

·         Water bath with Digital Controller

·         Condenser (Corning Glass) double coiled

Additional Information:

• Production Capacity: 50
• Delivery Time: 15 days
• Packaging Details: Cardboard Box export worthy.

Additional Information:

• Production Capacity: 50
• Delivery Time: 12 days
• Packaging Details: Cardboard Box export worthy.

Additional Information:

• Production Capacity: 100
• Delivery Time: 7 days
• Packaging Details: Cardboard Box export worthy.

Heating Mantle MSW-111HM: Body in made of one-piece aluminium and is logged with special mineral wool. The panel is provided with on-off switch, energy control knob, pilot lamp etc. Provided with joint less hand knitted heating nets of glass yarn capable of withstanding high temperature up to 400^oC. Single supplied complete with cord & plug to work on 220 V AC 50 Hz single phase. Single circuit system has been adopted.

Note: any size available. 

Additional Information:

• Production Capacity: 100
• Delivery Time: 5
• Packaging Details: Card Board Box export worthy.

Water Still MSW: 127WS: Casted stainless Steel vessel is electrically operated for getting pyrogen-free distilled water automatically. Wall hanging space-saving arrangement is provided. The condenser is seamless. Fitted with automatically ejection device which operates automatically when the water vessel gets dried. The baffle cup and condenser are made of stainless steel sheet.

Paraffin Dispenser MSW-117PD: Paraffin Dispenser is embedding bath-single type dispenser which is double walled, both made of stainless steel sheet, gap filled with glass wool for temp. Insulation Temperature range ambient to 70°C controlled by hydraulic type thermostat. Completely supplied with Pilot Lamp, Temp. Control Knob, Cord-Plug etc. To work on 220V AC 50Hz, single phase.

Available in capacity: 1 liter, 2 liter & 5 liter.

Optional: Stainless steel basket.

Additional Information:

• Production Capacity: 100
• Delivery Time: 7
• Packaging Details: Card Board Box export worthy.

Electrophoresis Horizontal MSW-1002EH: We are offering Electrophoresis Horizontal Mini to our clients.

Specifications:

Features:

· The unit is jointless, molded of transparent Polycarbonate to avoid leakage.

· The unit also includes a buffer chamber, safety lid with cables. And following standard accessories.

Applications:

· It is required in Biotechnology, Molecular Biology applications in colleges, Universities, Research Institutes.

· It is meant for Nucleic Acid DNA-RNA characterization. These are also called Submarine Electrophoresis Unit/Agarose Gel/Poly Acrylamide Gel Electrophoresis Mini size.

Additional Information:

• Production Capacity: 50
• Delivery Time: 5 days
• Packaging Details: Cardboard box export worthy.

Tray Dryer MSW-36TD: We are offering Tray Dryer to our clients. It is double walled with a double door. Temperature controlled by the thermostat with a dial type thermometer. Forced air blower.

Chamber Size (HxWxD) Tray Capacity

mm Inches.

430x840x650 8Tray 16”x32”x 1 1/4

430x840x910 12Tray 16”x32”x 1 1/4

910x840x910 24Tray 16”x32”x 1 1/4

960x1270x1450 45Tray 16”x32”x 1 1/4

960x1700x1700 96Tray 16”x32”x 1 1/4

Optional:

• Timer 0-24 hours.

• Digital temp. Indicator-cum-controller.

• Tray 16”x32”x 1 1/4 size.

Additional Information:

• Production Capacity: 50
• Delivery Time: 10 days
• Packaging Details: Wooden box export worthy.

Rotary Shaker MSW-106RS:  is a compact benchtop model with platform fitted with rubber discs for continues shaking of the solution in flasks of various sizes, mounted on a heavy angle iron frame speed is controlled by an electronic speed controller.

Additional Information:

• Production Capacity: 50
• Delivery Time: 7 days
• Packaging Details: Cardboard Box export worthy.

A compact stirring device utilizing a rotating magnetic field by a permanent magnet including variable stirring action from the speed from 100- 1400 rpm with speed accuracy of ±2. The magnetic field applied from below the container. Stirring is accomplished by a Teflon rotor placed in the liquid to be stirred. Stainless steel top plate bearing medium temp max. 250º C with an accuracy temp setting of a ±5ºC control Digital temperature controller with an accuracy setting of ±5ºC with the facility of Safety circuit hot plate 25ºC over.Complete with stands and clips, magnetic stirrer, pilot lamp, plug-cord, speed regulator continuously variable, digital temperature controller, on-off switch. To work on 220 VAC 50 Hz single phase.

Additional Information:

• Item Code: GLE03
• Pay Mode Terms: Other