Monarch Industrial Products India Private Limited

• Micro-fibres reinforced Acrylic Water Proofing & Heat Reflective coatings to 200% elongation
• MonoProof Conc is a unique chemical treatment for the waterproof ing, protection and repair of concrete. MonoProof Conc is the most chemically active product within the MonoProof Crystalline Waterproofing System.

• 1st layer in grey color
• 2nd layer in ivory color
• 3rd layer in white color

• Minimum surface preparation needed - Low labor costs.
• Applied directly to the damp concrete and masonry
• Excellent adhesion - Bonds to porous and nonporous surfaces.
• Retains flexible when submerged
• Non-toxic-ideal for potable water tanks
• Breathable-allows transmission of water vapour from interior of building
• Flexible, with thermal expansion similar to concrete.
• For special applications such as areas where more thick plaster application is needed
• Excellent for concrete roof, leaking brick and masonry walls
• Good resistance to Carbon dioxide and Chloride ion diffusion
• Flexible enough to bridge hairline crack bridge up to 0.5mm width
• The product shall exhibit at least 40% elongation at ambient & 30% elongation in under water condition
• Water vapor permeable
• Abrasion resistant–No additional protective coating is required for roof subjected to foot traffic.
• Ease of application – can be applied by brush & roller easily.
• Light weight – does not add extra weight

• Basement
• water tanks
• reservoirs
• swimming pools
• Flat roofs
• terraces and balconies
• Bridge As
• Lift Pits
• Concrete foundations
• Parking decks
• Bathrooms, Toilets, Sunken Portions
• Podiums
• Roof Gardens
• Retaining walls
• Pile heads
• Submerged tunnels
• Sumps
• Structural surface of cellars
• Canals and dam walls
• Sea Water Channels
• Steam rooms
• Sewerage Treatment Plants
• Drainage culverts

Additional Information:

• Item Code: MonoProof-EW200
• Production Capacity: 15 Tons Per Day

Description:

MonoProof BWP is a ready mixed coating, brush applied bituminous, black, lead- free, acid, alkali, water and chloride resistant that cures by reaction with atmospheric moisture to form a tough but flexible waterproofing membrane. They also meet the requirements for coatings suitable for use on surfaces in contact with potable water.
MonoProof BWP are based on raw materials which are amongst the most water and water-vapor resistant surface coating materials available. They are also resistant to a wide range of chemical attack. Also to protect the concrete against effects of chlorinated water, and to inhibit algae growth and facilitate easier cleaning. The excellent chemical resistance of MonoProof BWP makes it particularly suitable for sub-structure applications in areas where chemical contaminants and aggressive ground water conditions prevail.

Specially selected bitumens are blended to produce various grades, each designed to provide the best possible protective coating for its practical purpose. MonoProof BWP incorporates fibers which give body to the film and act as reinforcement in the coating, eliminating cracking and crazing under conditions of thermal movement.

Application Area:

• Internal tanking of pools, water tanks, sumps, reservoirs, etc., before tiling or other surface finishing
• External tanking of masonry / concrete walls of basements, swimming pools, sumps and subways
• Waterproofing of terraces, balconies, kitchens and toilet floors
• R.C. Roofs
• Below grade floor slabs
• Car deck
• Podiums.
• Roof terraces, Balconies, Patios
• Sewage works and Sunken Portions

Additional Information:

• Item Code: 11161

Additional Information:

• Delivery Time: Immediate

FloorClad SCS6 is a hybrid polyurethane based, resin floor coating for use in wide range of industrial environments where a lasting to low maintenance floor is required. It is ideally suited for use in areas where a high degree of resistance to chemicals, oils and grease is required. The product comprises of two top coats each top coat to be a minimum of 200 microns thick.

Floor Screeds & Toppings Application

• Workshops
• Garages
• Traffic aisles in factories or warehouses
• Production floors
• Processing Areas
• Kitchens
• Ware Houses
• Corridors.
• Showrooms.

Additional Information:

• Item Code: FST-08
• Production Capacity: 15 Tons Per Day
• Delivery Time: 5 days

Rubber Repair Putty

This high performance two-part urethane was developed to repair critical operating equipment faster, more reliably and with greater ease than before. Rubber Repair Putty is an adhesive, sealant and repair compound all in one convenient, self-mixing system. Extremely tough and fast curing, it forms permanent bonds to rubber, urethane, PVC, metal, glass, masonry and plastics. Its excellent flexibility and elongation properties make it suitable as a sealant in the most demanding environments. And, the system's no-measure, self-mixing features make it extremely convenient for fast, on-site repairs, especially to conveyor belts and other rubber parts exposed to weather and extreme wear.

Recommended Applications of Rubber Repair Putty:

• Repairing conveyor belts.
• Repairing or rebuilding rubber liners in mills, pumps, feeder bowls, hoppers, chutes, and fans.
• Repairing cast urethane screens and liners.
• Forming tough, flexible bonds to metal, rubber, and masonry parts

Additional Information:

• Item Code: MRC006
• Production Capacity: 15 Tons Per Day
• Delivery Time: 5 days

Additional Information:

• Production Capacity: 15 tons per day
• Delivery Time: 5 days

Additional Information:

• Item Code: IMAE14
• Production Capacity: 15 tons per day
• Delivery Time: 5 days

Additional Information:

• Item Code: IMAM15
• Production Capacity: 15 tons per day
• Delivery Time: 5 days

Additional Information:

• Item Code: IMAM19
• Production Capacity: 15 tons per day
• Delivery Time: 5 days

Additional Information:

• Delivery Time: Immediate

Additional Information:

• Item Code: ST06
• Production Capacity: 15 tons per day
• Delivery Time: 5 days