Modern Stage Service

Providing a complete solution to Dimming and Moving Light Power distribution. No need to have separate mains distribution making set up times faster and lowering the number of individual components needed to put a show together. The ART 2000 controls up to 48 individual channels using four plug in modules of 12 channels each. - a 16amp 12 channel continuously rated dimming module with 250uS rise time- a 16amp 12 channel switch module for powering moving lights or other equipment. 20 Multicore output connectors ensure that cabling will be as simple and reliable as possible. Each channel of each Multicore output connector can be patched to any channel using the top hotpatch. The Hot Patch incorporates a lamp test indicator making faults easy to find when the same circuit powers more than one fixture. The 'Load Check' indicators for each dimmable channel give a sure indication that a load is present and the test faders on each dimmer channel ensure that you can easily check that it is the correct load without having the use of a console. The design incorporates full monitoring and status feedback via the backlit LCD display. Static state environments are catered for using the front panel control faders. Further 12 memories can be recorded for later replaying either as a simple show in the event a console is not available.

Portable dimmer is easy to carry for a small show or can be installed for the General Lighting in Hotel, Restaurant, Small Theaters, Home etc.

Capacity 10/20 Amps.
Input 220/240V, 50/60 Hz
Version Analogue 0 to +10Volt

Power 220/240 volts, 50/60Hz 3 Phase
Remote in 0 to +10volts analogue thru 36 pin Centronix

connector or 3 pin XLR connector in case of DMX 512

Protection MCB's for each channel input of rated capacity Isolator 3Phase and neutral of rated capacity to isolate dimmers from main-in

Dimmer Racks are available in 12,18,24,36,48 channel configuration.

Power On Indicator
Master Fader
Flash Level Master
Blinker Intensity Fader
Solo Switch with Fader
Chase Switch with Fader
2 Cross Faders, Black out Switch
6 Nos. dimmer modules of 2KW/4KW rating single phase
3 Phase Neon indicator
Digital volt meter to monitor AC Voltages of diff phases
Isolator of related capasity in the incoming mains

6x4 KW / 6x6 KW versions
19' rack mount, 3U high
DMX input via 5 pin XLR IN/THRU at front panel
Flexible DMX patch method
LED function menu
Dimmer condition display: Volt/Amp/DMX
Individual MCB protection
LED indicator for individual channel level
5 fade curves selection
Min load per channel: 40W
8 backup scenes