X
View Mobile Number 78% Response Rate

Condition Monitoring Service

Our company holds immense experience in this domain and is involved in rendering Condition Monitoring Service. This service is rendered by our professionals who hold several years of working experience.

Motor Circuit Analysis (MCA) Service
  • Motor Circuit Analysis (MCA) Service
  • Motor Circuit Analysis (MCA) Service
Interested in this product?
Get Best Quote
Service TypeTransportation Condition
Testimonial FormatE-Mail
Testing TypeSine on Random Vibration
Condition TypeProcess Definition
Seismic Testing RequiredYes
Periodic Review RequiredYes
Transportation VibrationYes

MVS ACMEI Technologies offers Motor Circuit Analysis (MCA™) service, a de-energized test method and that can be initiated from the Motor Control Center (MCC) or directly at the motor. The advantage to testing from the MCC is the entire motor system, including the connections and cables between the test point and the motor, is evaluated.

 

MVS ACMEI experts using ALL-TEST PRO MCA™ instruments apply a low voltage, non-destructive AC signal through the motor windings and measure the response to these signals. Winding faults are indicated by variances in the response to the applied signal through the windings. These variances cause unbalances in the measured response to the applied signal. Therefore, when testing 3-phase equipment such as motors, generators, or transformers the response of each phase is compared to the other two. When testing single phase devices or DC motors then the winding is compared to itself or compared to a like single phase device or a like DC motor.

 

Our team has executed State-of-the-art tests on HV Generators, Motors, Transformers, Switch gears, Cables, Lightning Arresters, Bushings, Insulating oils etc. We have expertise in doing Computerised Digital ELCID Test, Tanδ / PF / Capacitance measurement, Partial discharge analysis, DC High Voltage test, Winding Resistance measurement, IR & PI, Corona Probe test, Surge comparison test etc.

 

MVS ACMEI has done condition assessment of HV power equipment considering parameters like Visual Inspection, Operation conditions, History of the machine and electrical diagnostic test results. We have successfully tested Turbo and Hydro Generators ranging from 1.5 MW to 1000 MW. Also tested HV motors, Transformers, Bushings, Lighting Arresters, Circuit breakers, Cables etc.

View Complete Details

Yes, I am interested!

Electrical Signature Analysis (ESA) Service
Interested in this product?
Get Best Quote
Service TypeTransportation Condition
Testimonial FormatE-Mail
Testing TypeSine on Random Vibration
Condition TypeProcess Definition
Seismic Testing RequiredYes
Periodic Review RequiredYes
Transportation VibrationYes

MVS ACMEI Technologies offers Electrical Signature Analysis (ESA) service, an energized test method where voltage and current waveforms are captured while the motor system is running and then, via a Fast Fourier Transform (FFT), a spectral analysis is done by the provided software. From this FFT, faults related to incoming power, the control circuit, the motor itself, and the driven load are detected and can then be trended for Condition Based Maintenance/Predictive Maintenance purposes.

 

MVS ACMEI uses ALL-TEST PRO ESA instrument is actually two instruments in one - a complete Power Quality Analyzer (PQ) and complete Motor Analyzer (ESA). When in PQ mode it can be used for energy data logging, harmonic analysis, voltage and current charting, view waveforms, waveform capture of sags and swells, transient capture, and event capture.

 

Our team has executed State-of-the-art tests on HV Generators, Motors, Transformers, Switch gears, Cables, Lightning Arresters, Bushings, Insulating oils etc. We have expertise in doing Computerised Digital ELCID Test, Tanδ / PF / Capacitance measurement, Partial discharge analysis, DC High Voltage test, Winding Resistance measurement, IR & PI, Corona Probe test, Surge comparison test etc.


MVS ACMEI has done condition assessment of HV power equipment considering parameters like Visual Inspection, Operation conditions, History of the machine and electrical diagnostic test results. We have successfully tested Turbo and Hydro Generators ranging from 1.5 MW to 1000 MW. Also tested HV motors, Transformers, Bushings, Lighting Arresters, Circuit breakers, Cables etc.

View Complete Details

Yes, I am interested!

Sweep Frequency Response Analysis (SFRA) Service
Interested in this product?
Get Best Quote
Service TypeMachine Condition
Testimonial FormatE-Mail
Testing TypeSine on Random Vibration
Condition TypeProcess Definition
Seismic Testing RequiredYes
Periodic Review RequiredYes
Transportation VibrationYes

MVS ACMEI Technologies provides Sweep frequency Response Analysis (SFRA) services to protect power transfromers from failure. Most dielectric and mechanical failures in large power transformers are preceded by mechanical changes in the winding structure. These displacement in the winding structure may be the result of transport damage, short circuit forces, or natural aging effects on insulating structures used to support the windings. Detection of these displacements before dielectric failure reduces maintenance costs and improve system reliability.

 

Our team has executed State-of-the-art tests on HV Generators, Motors, Transformers, Switch gears, Cables, Lightning Arresters, Bushings, Insulating oils etc. We have expertise in doing Computerised Digital ELCID Test, Tanδ / PF / Capacitance measurement, Partial discharge analysis, DC High Voltage test, Winding Resistance measurement, IR & PI, Corona Probe test, Surge comparison test etc.

MVS ACMEI has done condition assessment of HV power equipment considering parameters like Visual Inspection, Operation conditions, History of the machine and electrical diagnostic test results. We have successfully tested Turbo and Hydro Generators ranging from 1.5 MW to 1000 MW. Also tested HV motors, Transformers, Bushings, Lighting Arresters, Circuit breakers, Cables etc.

 

The system provides attenuation signature curves that can easily be compared for deviation which indicates:

  • Core Movements
  • Winding deformation and displacement
  • Faulty core grounds
  • Partial winding collapse
  • Hoop Buckling
  • Broken or loosened clamping structures
  • Shorted turns and open winding

View Complete Details

Yes, I am interested!

Power Factor / TAN DELTA / Capacitance Measurement Service
Interested in this product?
Get Best Quote
Service TypeMachine Condition
Testimonial FormatHardcopy
Testing TypeSine on Random Vibration
Condition TypeProcess Definition
Seismic Testing RequiredYes
Periodic Review RequiredYes
Transportation VibrationYes

MVS ACMEI Technologies offers Power factor testing of rotating machinery which is a non-destructive AC test performed off-line at apparatus frequency. Apparatus insulation system has measurable electrical parameters such as Capacitance, Dielectric loss, and Power Factor, in addition to other less well-known characteristics. By detecting changes in these important electrical characteristics, failure hazards can be revealed, there by preventing loss of service by permitting orderly repaired or reconditioning of defective insulation. In this Power Factor / Tan d test, the measured quantities are dissipation factors (Tan d or PF), Tip up PF (D Tand), capacitance and dielectric power loss.

 

Our team has executed State-of-the-art tests on HV Generators, Motors, Transformers, Switch gears, Cables, Lightning Arresters, Bushings, Insulating oils etc. We have expertise in doing Computerised Digital ELCID Test, Tanδ / PF / Capacitance measurement, Partial discharge analysis, DC High Voltage test, Winding Resistance measurement, IR & PI, Corona Probe test, Surge comparison test etc.


MVS ACMEI has done condition assessment of HV power equipment considering parameters like Visual Inspection, Operation conditions, History of the machine and electrical diagnostic test results. We have successfully tested Turbo and Hydro Generators ranging from 1.5 MW to 1000 MW. Also tested HV motors, Transformers, Bushings, Lighting Arresters, Circuit breakers, Cables etc.

 

Benefits:

  • Detailed analysis that determines machine condition with respect to presence of Contamination, resin condition, presence of air-gaps/voids within insulation, lack of Contact of coil with core, looseness of coil/wedges, interfacial polarization and such other physical insights.
  • The test is one time test and does not depend on previous tests.
  • Provides explanation to conditions even before discharge inception voltage.

 

View Complete Details

Yes, I am interested!

Partial Discharge Analysis Service
Interested in this product?
Get Best Quote
Service TypeMachine Condition
Testimonial FormatHardcopy
Testing TypeSine on Random Vibration
Condition TypeProcess Definition
Seismic Testing RequiredYes
Periodic Review RequiredYes
Transportation VibrationYes

MVS ACMEI Technologies offers Partial Discharge Analysis service for rotating equipment. The continuous monitoring of PD activity in rotating machines has now become widely accepted as an effective method to identify sites of localised damage or degradation ahead of scheduled preventative maintenance outages.

 

Permanent PD monitoring of rotating machines overcomes many of the limitations of the annual, PD spot-tests, by providing continuous monitoring of the PD activity under normal (and abnormal) operating conditions. As a result of this, on-line continuous diagnostic PD monitoring over time has now become accepted as the most effective means of providing the necessary condition data suitable for planning and scheduling of preventative maintenance activity to support CBM strategies.

 

Our team has executed State-of-the-art tests on HV Generators, Motors, Transformers, Switch gears, Cables, Lightning Arresters, Bushings, Insulating oils etc. We have expertise in doing Computerised Digital ELCID Test, Tanδ / PF / Capacitance measurement, Partial discharge analysis, DC High Voltage test, Winding Resistance measurement, IR & PI, Corona Probe test, Surge comparison test etc.


MVS ACMEI has done condition assessment of HV power equipment considering parameters like Visual Inspection, Operation conditions, History of the machine and electrical diagnostic test results. We have successfully tested Turbo and Hydro Generators ranging from 1.5 MW to 1000 MW. Also tested HV motors, Transformers, Bushings, Lighting Arresters, Circuit breakers, Cables etc.

View Complete Details

Yes, I am interested!

Condition Monitoring Service
Interested in this product?
Get Best Quote

Condition Monitoring Service

Rs 30,000 / ServiceGet Latest Price

Service LocationHyderabad
Service ModeOnsite
Service Duration3 Days

We have been counted amongst the most trusted names in this domain, engaged in providing Condition Monitoring Service.

We will design and implement the agreed Condition Monitoring Services program to achieve the following objectives:
  • Assess the condition of equipment thoroughly
  • Eliminate catastrophic failures
  • Extend the life of components
  • Reduce unplanned / forced outages
  • Improve plant performance
  • Reach and maintain availability close to 100%
  • Operational review & value contribution


Price Range: Rs 30000 - 300000 /Service.

View Complete Details

Yes, I am interested!
3.8/5★★★★★★★★★★

Reviewed by 6 Users

5 star3

4 star1

3 star1

2 star0

1 star1

User Satisfaction

Response100%

I

IU Ahmed ★★★★★ ★★★★★

02-March-21

Response

D

Darshan Singh ★★★★★ ★★★★★

26-October-20

Leave a Message, we will call you back!
Send your enquiry to this supplier
I agree to the terms and privacy policy
All Rights Reserved (Terms of Use)