• Planing depth adjustment
• Adjustable planer fence
• Adjustable knife shaft guard
• Cast iron planing tables
• Cast iron jointer fence

JJ-6 is a long cast iron table planer designed for hobby use. Due to the fact that it has the same layout as the professional Jet models, it is precise and easy to use.

Structurally, it consists of two parts. In the lower one, which plays the role of a pedestal-stand, there is a single-phase asynchronous ("induction") motor with a capacity of slightly more than a kilowatt and a chip collection casing with a 100-mm branch pipe for connection to an exhaust system. The upper part consists of a cast-iron base, where the planer shaft is located, and cast-iron work tables with appropriate equipment, consisting of a protective cover and a workpiece stop. Both tables are height adjustable by means of screw mechanisms driven by handwheels. By moving the feeding (front) table, the planing depth is adjusted, for which there is a corresponding marking; the receiving (rear) is displaced only during adjustment operations during the maintenance of the machine.

JJ-8-M is a planer with a planing width of 200 mm and long cast iron tables, designed for amateur use. In terms of layout and device, it repeats the professional Jet models, which makes it equally accurate and easy to use. The design consists of two parts. At the bottom (it plays the role of a pedestal stand), a single-phase asynchronous motor and a chip collection casing with a 100 mm suction nozzle. In the upper part are cast-iron work tables, a protective casing, a blank stop and a cast-iron base, where the planing shaft is located. Both tables are height-adjustable using screw mechanisms, driven by handles-handwheels. By moving the feed (front) table, the depth of planing is established, for which there is an appropriate markup; receiving (rear) is regulated only during maintenance of the machine during commissioning operations. The workpiece emphasis is cast-iron, with a tilt mechanism (it is possible in both directions). The selected position is fixed by a threaded clamp. The blade shaft is equipped with three knives that allow re-sharpening. Their size and assortment is the same as that of professional Jet jointer with the same planing width.

Features:

• Depth adjustment
• Adjustable joint stop
• Adjustable blade guard
• Cast Iron Casting Tables
• Iron casting joint

Light weight and compact planing machine Jet JWP-12 is designed for individual use in carpentry shops and "on the road" in a building environment. Thanks to the collector motor, it weighs only 30 kg, while having a power of 1.8 kW. Motors of this type are demanding to comply with the temperature conditions, so the JWP-12 is equipped with an overheating sensor that turns off the power when a break is needed for cooling. The quality of planing machine is not inferior to stationary models of the initial level, on the contrary, the high speed of rotation of the blade shaft makes it in some cases more preferable. There are all the standard systems that are typical for stationary analogues: an automatic feeding mechanism, feeding and unloading tables with rollers (for convenience of transportation and storage, they are made folding), rollers on top of the body for the reverse feed of the workpiece. The adjustment of the height of the knife shaft, depending on the size of the part, is produced by a single rotating handle. The accumulated operating experience of the JWP-12 showed that, subject to just a few simple rules, the machine is very durable and reliable. It is required only to avoid working without connecting to the dust extraction system and in time to clean all the mechanisms from the chips. An important advantage of Jet planers on the background of analogs of other brands is a reliable supply of consumables, in particular, replaceable knives, and the JWP-12 model is initially supplied with a spare set of high-speed steel blades.

Features:

• Overload Shutdown System
• Adjusting the height of the planing rotating handle
• Folding roller feed and unloading tables

Equipment:

• Two sets of high-speed steel knives (one mounted on the shaft).

• Provides a consistently smooth finish and precise depth of cut
• Large infeed and outfeed tables provide support for longer workpieces
• Offers a full 12 1/2 inch cutting width
• Delivers 17,500 cuts per minute
• Max depth of cut in single pass: 3/32 inch
• Easy, accurate setting of depth of cut in 1/16 inchincrements
• Large infeed and outfeed tables fully support the workpiece
• Locating holes for bench mounting
• Dust extraction chute extracts to the left or right

Additional Information:

• Item Code: 583534

• Trade rated planer thicknesser substantially constructed from cast iron and welded steel
• Spiral block with shear cutting action gives a very clean finish to the work
• Uses 15mm solid Tungsten Carbide four edged spur cutters
• Long cast iron tables and tilting alloy fence offer exceptional accuracy and stability
• Pivoting dust extraction hood operates in thicknessing and surfacing modes
• Both tables are adjustable and electrically interlocked for safety
• Extended support roller on thicknessing table.

Additional Information:

• Item Code: 101157
• Production Capacity: Trading
• Delivery Time: 1 week

• Portable planer thicknesser for a woodshop or construction site.
• Planing width of 200 mm.
• Powerful 1,5 kW motor.
• Spindle speed of 9000 rpm.
• Precise thicknessing tables and a prolonged rear table.
• Simple change from thicknessing to planing.
• Support fence tilts from 90° to 45°.
• Ideal for construction work.

• Folding planer table

• Eccentric planing depth adjustment mechanism
• Adjustable planer fence
• Adjustable cutterblock guard
• Cast iron planing tables
• Aluminum profile jointer fence

• Switchable drive for feed shafts
• Adjusting the planing height with a rotating handwheel

The Jet JPT-260 machine allows you to professionally perform planing and thicknessing operations. The massive construction with cast iron tables gives precision and vibration-free operation, the powerful induction motor ensures high performance and reliability.

Planing and thicknessing are performed as usual - no special work methods are required; changeover takes almost no time. The upper planer module, which combines both tables and the mechanism for adjusting the planing depth, completely leans back (while the previously made settings do not get lost), the chip removal cover turns over. The convertible design offers advantages both in operation (better visibility, better chip removal) and when servicing the planer shaft, which is easy to access.

The combined machine JPT-260 is ideal for use in workshops with limited working space as a replacement for a separate thicknessing tool and jointer. 

Additional Information:

• Item Code: 10000289M
• Production Capacity: trading
• Delivery Time: 1 week

Compact yet powerful palm planer, which is light, easy­ to ­handle and includes all the features of a conventional sized planer and more. Utilizing twin 60mm solid TCT blades, the TCMPL offers the perfect combination of power and balance with excellent grip for safe, one ­handed operation. Utilizing twin 60mm solid TCT blades, the TCMPL offers the perfect combination of power and balance with excellent grip for safe, one ­handed operation. The 420W motor and 60mm planing width make this planer ideal for fast material removal on small to medium­ sized workpieces. Up to 1.5mm of material can be removed in one pass, and the adjustable planing depth with 3 bevelling grooves ensures flatness and improves cutting accuracy. A power lock­off switch prevents accidental operation, and the foldaway blade protection foot prevents damage to the blades when the planer is resting on a surface.

Features:

• Stepped depth control allows accurate cutting depth from 0-1.5mm
• 3 bevelling grooves in front shoe increase the range of edge bevelling depths
• Power lock-off prevents accidental operation
• Slim handle design is easy to hold and control using one hand
• Rubber over-moulded grip increases control and safety
• Adjustable dust extraction allows chips to be directed away from the workpiece
• Parking stand protects the blades and workpiece from damage on rundown.

• Overload cut-off system

• Planing depth adjustment
• Adjustable planer fence
• Sliding knife shaft guard
• Cast aluminum planing tables
• Aluminum profile jointer fence

• Rubberized feed shafts
• Height adjustment of planing with rotary handle
• Removable sheet steel work table extension

On the upper table, planing or planing at an angle is performed using a parallel stop, the inclination of which is adjustable in the range from 0 to 45 °. Maximum material removal during jointing is 3 mm. For thicknessing (calibrating parts by thickness) the lower table and the device for automatic feeding of workpieces are intended. In this case, the maximum planing depth in one pass is 2 mm.

With its wide functionality and high performance, the Jet JPT-8B weighs less than 30 kg and remains mobile: it can be taken to the construction site or moved alone in the workshop.

Additional Information:

• Item Code: 707400M
• Production Capacity: Trading
• Delivery Time: 1 week

The machine is designed for individual operation and combines the two most popular functions: jointing and thicknessing. JET JPT-10B Planer Jointer equipped with a powerful and "high-torque" collector engine, which provides high performance. Motors of this type are demanding to comply with the temperature conditions, therefore the machine is equipped with an overheating sensor that turns off the power when a break is needed for cooling. On the top table, planing or planing is made at an angle using a parallel stop, which is adjustable from 0 to 45 °. The maximum amount of material removal is 3 mm. For thicknessing (calibration of parts in thickness), the lower table and the device oodenfor automatic feeding of blanks are intended. In this case, the maximum planing depth in one pass is 2 mm. With its broad functionality and high performance, the machine weighs just over 30 kg and remains mobile: you can take it to the construction site or move it alone in the workshop. It can be installed on the floor (an open stand is standard) or on a workbench. When operating the machine, it should be borne in mind that accurate and trouble-free operation is possible only with high-quality chip removal, for example, with the help of Jet exhaust systems.

Features:

• Overload Shutdown System

• Adjusting the depth of the jointing
• Adjustable plane
• Adjustable blade shaft guard
• Aluminum Alloy Jointing Tables
• Joining emphasis from the aluminum profile

• Adjustment of height of planing by the rotating handle.