Loaded with features, the 31A Sander from Powermatic can tackle the most demanding tasks. Full cast iron construction is great for heavy woodworking. The integral dual dust port keeps both belt and disc portions clean, extending abrasive life. The articulating table mounted on the 6" x 48" belt sander head can be used vertically, horizontally, or angled to accommodate diverse jobs. The belt head has an indexing pin with stops at 0, 45° and 90° and the head lock allows use at any angle in-between. Removing the top guard allows contour sanding and the cast iron tables with miter gauge slots and positive stops make set-up fast, accurate, and simple for any angle.

Features:

• Versatile belt and disc sanding allows for multiple sanding angles
• Belt table tilts down to 45°, and can be set for beveled and mitered angle sanding
• Multi-position belt head locks at any angle from 0° to 90°; includes indexing pin for 0, 45°, and 90° stops
• 6" x 48" sanding belt can be changed and adjusted quickly and easily.
• Belt and disc tables are precision ground cast iron with miter slots for precision and rigidity
• Full cast iron platen with solid crowned aluminum drums for smooth sanding belt movement and support
• 12" disc is balanced for flat, even coverage.

• Planing depth adjustment
• Adjustable planer fence
• Adjustable cutterblock guard
• Cast iron planing tables
• Cast iron jointer fence

The JSJ-6 is a benchtop planer with cast iron tables and a stop for precise finishing of compact workpieces. Equipped with a bulk bag for collecting chips and a fan for suction and discharge. This built-in aspiration system allows you to do without connecting to an external one, the place for placing and storing which is not found in every workshop.

Despite the fact that the machine has cast-iron tables and an emphasis, it is not too heavy - its collector motor is several times lighter than an asynchronous one with a similar power. The reliability and durability of the engine are ensured by a good torque reserve in combination with a reduction belt transmission. The brush assembly, which requires preventive maintenance, is easily accessible, the contacts themselves are quick-detachable.

The main advantage of the JSJ-6 in comparison with analogues is that its design provides precise, comfortable work without vibrations: massive tables, an emphasis and its bracket are made in the same way as on heavy professional models, which is almost never found in the compact class of desktop planers.

Additional Information:

• Item Code: 10000278M
• Production Capacity: Trading In India
• Delivery Time: 1 week

AVAILABLE FROM AUGUST 2020

• Ability to install a brush shaft (optional)
• Console drum arrangement
• Infinitely variable feed rate
• Adjusting the height of the drum position with a rotating handle
• Easy (no tools) adjustment of the conveyor parallelism
• Die-cast aluminum body
• Aluminum grinding drum
• System for quick fixing and tensioning of the sanding belt

JWDS-1020-M is a compact cantilever sander. Supplied as standard with an aluminum drum with attachments for winding an abrasive belt. As an option, it can be equipped with a special shaft for the installation of brushing brushes. The metal drum has a patented design with quick-clamping belt fixation and an automatic tensioning mechanism that ensures correct installation and compensates for stretching during operation. Depending on the grit size of the abrasive, the machine can perform a wide variety of operations, from calibration to finishing grinding. The cantilever arrangement of the unit allows processing in two steps.

The model is part of the new Jet line and has a modern aesthetic design: the machine body is cast from light alloy, rigid and durable steel conveyor and drum assemblies are attached to it. The height of the grinding unit is adjusted by turning the handle. The conveyor belt has a parallelism adjustment with one screw and wing nut - no adjustment tool needed. The feed speed is infinitely variable from zero to three meters per minute.

The design of the machine is optimized for easy and convenient drum / roller change, which simplifies changeovers for different materials and tasks. Jet supplies a wide range of brushing brushes specially for this model, with metal cord in various thicknesses and polymer-abrasive bristles in various grit sizes.

Additional Information:

• Item Code: 723510M
• Production Capacity: tarding
• Delivery Time: 1 week

FEATURES:

• Ability to install a brush shaft (optional)
• Console drum arrangement
• Infinitely variable feed rate
• SandSmart Feed Control System
• Adjusting the height of the drum position with a rotating handle
• Easy (no tools) adjustment of the conveyor parallelism
• Aluminum grinding drum
• System for quick fixing and tensioning of the sanding belt
• Open stand

JWDS-2244 is a professional-grade drum sander with a cantilever working module, designed for workpieces up to 1120 mm wide.

The machine is equipped with an automatic workpiece feeding device in the form of a mechanically driven conveyor belt. Speed ??????control is carried out with the participation of the SandSmart controller, which monitors the amount of load on the main motor, according to the current consumed by it. If the operator has set too high a tempo or a thickening of the workpiece is caught and the motor is overloaded, the feed rate will be automatically reduced. The transition to this mode will be signaled by an indicator light. When the load on the motor is reduced, the light will turn off and the conveyor speed will return to the previously set value.

An abrasive belt is used as a consumable, it is wound on a drum, the ends are fixed with latches, the correct tension is provided by a special spring device that can compensate for the stretching of the material during wear. The height of the assembly is adjusted with a rotating handle with simultaneous control on a millimeter scale; for easier adjustment, you can purchase a digital display and a screw limit stop. Adjustment of the parallelism of the base (no "wedge") is also done without auxiliary tools and devices.

As additional equipment, we offer roller brushes, with which you can brush wooden blanks. Depending on the type of such a roller and the processing mode, the effect of artificial aging is achieved with a sharp, distinct manifestation of the structure of the wood fibers, a simple sanding with the removal of "pile", or an intermediate result with a shallow manifestation of texture. To convert the machine to a brushing machine, it is necessary to purchase a special shaft (option art. RB.JWDS2244.410), on which universal brushes 410 mm are subsequently mounted and an assembly is installed instead of a drum. This procedure is performed without disassembling the machine and does not require special qualifications.

Additional Information:

• Item Code: 723540OSKM
• Production Capacity: trading
• Delivery Time: 1 week

• Console drum arrangement
• Infinitely variable feed rate
• SandSmart Feed Control System
• Adjusting the height of the drum position with a rotating handle
• Adjustable drum height limiter
• Easy (no tools) adjustment of the conveyor parallelism
• Aluminum grinding drum
• System for quick fixing and tensioning of the sanding belt
• Open stand

JWDS-2550 is a professional-grade drum sander with a cantilever working module, designed for workpieces up to 1270 mm wide. Equipped with a device for automatic feeding of the workpiece in the form of a conveyor belt with a mechanical drive. Speed ??????control is performed with the participation of the SandSmart controller, which monitors the amount of load on the main motor, according to the current consumed by it. If the operator has set too high a tempo or a thickening of the workpiece is caught and the motor is overloaded, the feed rate will be automatically reduced. The transition to this mode will be signaled by an indicator light. When the load on the motor is reduced, the light will turn off and the conveyor speed will return to the previously set value.

An abrasive belt serves as a consumable, it is wound on a drum, the ends are fixed with latches, the correct tension is provided by a special spring device that can compensate for the stretching of the material during wear. The height of the assembly is adjusted with a rotating handle with simultaneous control on a millimeter scale, an adjustable screw stop is provided for ease of adjustment, and a digital display can also be purchased. Adjustment of the parallelism of the base (no "wedge") is carried out without auxiliary tools and devices.

Additional Information:

• Item Code: 723550OSKM
• Production Capacity: trading
• Delivery Time: 1 week

• Ability to install a brush shaft (optional)
• Console drum arrangement
• Infinitely variable feed rate
• Feed Logic control system
• LCD display for feed rate, drum position height and load level
• Adjustment of the height of the position of the drum with a rotating handwheel
• Cast iron body
• Aluminum grinding drum
• System for quick fixing and tensioning of the sanding belt
• Loading table extensions
• Curbstone stand with wheels for easy transportation

Powermatic PM2244 is a drum sander for professional work in private carpentry shops and in manufacturing. Its design combines reliable, time-tested solutions (powerful motor, massive cast iron body parts) and modern high-tech, such as the unique Feed Logic control system. These features, coupled with the successful console layout, combine to deliver the Powermatic Gold Standard performance that is respected around the world.

The scope of delivery includes a steel pick-up and unloading table, as well as a pedestal with storage compartment and wheels for easy transport.

To adjust the height of the grinding drum, a massive flywheel with a polished surface is provided. The position can be monitored on the familiar scale on the case, but it is also possible on the digital indicator, so it is clearer and more accurate. It has a display mode switch (inches / millimeters) and a reset button for setting the zero position, which is convenient both when changing the thickness of the workpieces, and when switching to a different grit size. The latter is a sanding paper belt wound on an aluminum drum. Its ends are fixed in special clamps for easy fixation and automatic tension.

The "highlight" of the machine is the Feed Logic system, which helps the operator to correctly control the feed of workpieces. It does not interfere with the work until the speed of the conveyor exceeds the optimum, and only displays the amount of load on the main engine. Based on the readings, you can increase or decrease the feed capacity by turning the knob of a conventional regulator. If the load exceeds the permissible (unsuccessful initial setting, thickening of the workpiece, etc.), the speed of the conveyor is automatically reduced; if the movement of the drum becomes easier, it will increase again, but not more than the operator originally set. Thus, Feed Logic helps increase productivity and protects the machine from overloading.

Additional Information:

• Item Code: 1792244-RU
• Production Capacity: trading
• Delivery Time: 1 week

FEATURES:

• Cast iron body

Sanding pad

• Attachment of abrasive discs with Velcro

Belt grinding unit

• Adjusting the angle of installation of the belt sander
• Lever for quick tension and release of the sanding belt

JSG-233A-M disc belt sander for professional use in private carpentry workshops. It is a relatively compact model designed for desktop use, but made with precision and solidity. The body is made of cast iron, which increases stability and helps to reduce vibrations during operation. The work table is made of die-cast aluminum and is mounted on a powerful swing arm with additional support for increased rigidity. Depending on the need, it is mounted opposite the disc or belt grinding unit.

The standard equipment includes a rotary corner stop with a guide along the groove, it is used in conjunction with a work table, independently of it, a small longitudinal stop is installed for working on the tape. The ribbon unit itself can be placed vertically, horizontally or in any intermediate position.

A 38 mm exhaust air duct is provided for dust extraction.

Additional Information:

• Production Capacity: trading
• Delivery Time: 1 week

• Powerful 10A motor for rapid stock removal
• Variable speed control improves versatility when working with different workpieces
• Side dust port connects to the supplied dust bag or dust extraction system
• Belt tracking adjustment for accurate alignment of the sanding belt
• Rubber over-moulded grip offers increased support, safety & control of the tool
• Lock-on button adds convenience with extended use
• Small diameter front roller allows for sanding in confined areas
• Power-on neon increases operator safety
• Removable bail handle increases support & safety.

• Cuts Square: The AS170 cuts square opening with no over cutting.  Surrounding brickwork can remain untouched, no bolstering or stitch drilling is required and job completion times can be reduced.
• Cuts Deep: The AS170 is the only small handheld saw able to cut to a depth of 4 ¾”
• Cuts Safe: The AS170 provides superior operator safety.  The inherently safe cutting action prevents kickback and is easy to control.
• Plunge Cuts: Use the AS170 to cut directly into flush walls without stitch drilling.
• Cuts Dry / Low Dust: He unique cutting technology creates very little fly-dust protecting the operator and creating a cleaner work environment.
• High Visibility and Precision Cutting: The forward facing blades allow clear visibility when cutting making the AS170 the ideal tool whenever accuracy and precision is required.

• The ability to install a brush shaft (optional)
• Cantilever Drum Layout
• Infinitely variable feed rate
• SandSmart feed control system
• Drum height adjustment with rotary knob
• Simple (without tools) conveyor parallelism adjustment
• Cast iron housing
• Aluminum grinding drum
• Sanding belt fastening and tensioning system

JWDS-1632-M is a modern model of a drum grinding machine with the ability to install brushes for brushing wood. The traditional layout with the cantilever arrangement of the working unit allows you to work with parts whose width is twice the length of the drum or brush.

The height above the conveyor belt is regulated by the rotation of the handle, while you can control both the absolute value on a millimeter scale on the body and the relative movement along the limb on the handle. The parallelism of the shaft and the base is adjusted without an auxiliary tool: two clamps and a screw stop are equipped with wing knobs.

The conveyor belt drive is equipped with infinitely variable speed control with the SandSmart electronic system, which adjusts the set value depending on the magnitude of the engine load. If it reaches a critical value (for example, the thickness of the workpiece has increased), the conveyor speed will automatically decrease, and later, as soon as conditions allow, it will automatically return to its previous level.

In the standard version of delivery, the model is equipped with an aluminum drum with winding from abrasive tape. Thanks to the proprietary fastening system, its replacement is quick and easy. Access to the assembly is freed after the casing-dust collector is tilted, the ends are fixed with clamps and latches, the tension is made by a special spring device that compensates for the stretching of the tape during wear.

As additional equipment, brush rollers are offered, with which you can brush the wooden workpieces. Depending on the type of such a roller and the processing mode, the effect of artificial aging is achieved with a sharp distinct manifestation of the structure of the wood fibers, simple grinding with the removal of “pile”, or an intermediate result with a shallow manifestation of the texture. To convert the machine into a brashing one, it is necessary to purchase a special shaft (option art. RB.JWDS1632), then 410 mm universal brushes are mounted on it and the assembly is installed instead of the drum.  

• The ability to install a brush shaft (optional)
• Cantilever Drum Layout
• Infinitely variable feed rate
• SandSmart feed control system
• Drum height adjustment with rotary knob
• Simple (without tools) conveyor parallelism adjustment
• Cast iron housing
• Aluminum grinding drum
• Sanding belt fastening and tensioning system

Additional Information:

• Item Code: 723520KM
• Production Capacity: trading

Additional Information:

• Production Capacity: Trading
• Delivery Time: 1 week

Additional Information:

• Item Code: RX256A
• Production Capacity: Trading
• Delivery Time: 1 week

The TTS1400 Plunge Track Saw is a highly versatile, feature­packed tool with easy mode selection, fast set­up and advanced safety features. When fitted to a track, the TTS1400 delivers long, straight cuts, and the flat design of the blade housing means the saw will work right up to the edge of the workpiece - ideal for trimming doors and cutting hardwood flooring. The mode selector allows quick change between free plunge, scribe or blade change, and cutting width indicators show the exact point at which the blade plunges into the workpiece. Blade changing is safe and easy. The power switch locks out during the blade­changing process, and the blade is easily accessed through the blade guard without having to remove the cover. For straight, clean, accurate cuts through any type of wood, Tritons TTS1400 Plunge Track Saw delivers a professional result every time.

Features:

• Mode selector for quick change between free plunge, scribe, and blade change modes
• Scribe mode eliminates splintering and tear-out
• Easy change carbon brushes to further extend the product life-span
• Precision bevel cut adjustment of bevel angle from 0 - 48 degree 
• Dual bevel quadrants provide stability for precision cutting
• Variable speed, soft start and constant speed electronics optimised for required cutting conditions for every material
• Dual alignment cams fine tune the fit between the saw and track for exact cuts
• Anti-kickback safety feature prevents the saw from jolting when performing plunge cuts
• Guide rail track lock adds stability when performing bevel cuts
• Precise cutting depth adjustment can be set to a maximum of 54mm
• Width of cut indicators for exact positioning of blade on the work piece
• Fast blade replacement easily accessed through the blade guard
• Highly efficient dust extraction with universal vacuum system adaptor and 360 degree  outlet
• Blade-change mode and power switch lock-out for easy blade changes
• Plunge lock secures the blade inside the guard when not in use
• Non-slip rubber over-moulded grip offers increased support, safety and control.

• Ability to install a brush shaft (optional)
• Console drum arrangement
• Infinitely variable feed rate
• SandSmart Feed Control System
• Adjusting the height of the drum position with a rotating handle
• Easy (no tools) adjustment of the conveyor parallelism
• Cast iron body
• Aluminum grinding drum
• System for quick fixing and tensioning of the sanding belt

JWDS-1836-M is a modern model of a drum sander with the ability to install brushes for brushing wood. The traditional cantilever arrangement allows for sanding workpieces that are twice the width of the drum or brush.

The height above the conveyor belt is adjusted by rotating the handle, while it is possible to control both the absolute value on a millimeter scale on the body and the relative movement along the dial on the handle. Adjustment of the parallelism of the shaft and the base is carried out without the use of an auxiliary tool: two clamps and a screw stop are equipped with wing handles.

The conveyor belt drive is equipped with a stepless speed control with an electronic SandSmart system, which adjusts the set value depending on the load on the engine. If it reaches a critical value (for example, the thickness of the workpiece has increased), the conveyor speed will automatically decrease, and later, as soon as conditions allow, it will automatically return to the previous level.

In the standard delivery version, the machine is equipped with an aluminum drum wound from an abrasive belt. Thanks to the proprietary fastening system, its replacement is quick and easy. Access to the unit is freed after the dust collector casing is folded back, the ends are fixed with clamps-latches, tension is produced by a special spring device that compensates for the stretching of the tape during wear.

As additional equipment, we offer roller brushes, with which you can brush wooden blanks. Depending on the type of such a roller and the processing mode, the effect of artificial aging is achieved with a sharp, distinct manifestation of the structure of the wood fibers, a simple sanding with the removal of "pile", or an intermediate result with a shallow manifestation of texture. To convert the machine to a brushing machine, you need to purchase a special shaft (option art. RB.JWDS1836M.410), on which universal brushes 410 mm are subsequently mounted and an assembly is installed instead of a drum. This procedure is performed without disassembling the machine and does not require special qualifications.

Additional Information:

• Item Code: 723530KM
• Production Capacity: trading
• Delivery Time: 1 week

FEATURES:

• Oscillatory motion of the drum
• Console drum arrangement
• Infinitely variable feed rate
• SandSmart Feed Control System
• Infinitely variable frequency of oscillatory movements
• Adjusting the height of the drum position with a rotating handle
• Easy (no tools) adjustment of the conveyor parallelism
• Aluminum grinding drum
• System for quick fixing and tensioning of the sanding belt
• Closed stand

JWDS-2244OSC-M Oscillating Drum Grinder. The model is made in a new design style and is equipped with a "smart" control system for the feed rate of the workpiece SandSmart.

The design is based on a cast-iron body, on which an auto-feed conveyor and a console with a grinding drum are mounted. Due to this arrangement, the width of the workpiece is not limited by the dimensions of the grinding unit. The height of the drum is changed using the adjusting handle, which allows you to adjust the clearance to the conveyor in the range from 0.8 to 100 mm. The operation to adjust the parallelism of the base and the drum axis is performed without the use of auxiliary tools.

In addition to the main asynchronous motor with an output power of 1.3 kW, an auxiliary collector is installed in the console. It activates the oscillation mechanism, which provides transverse (along the axis of rotation) vibration of the drum with an amplitude of ¾ inch (approximately 19 mm) and a frequency from zero to 120 strokes per minute. Adjustment is made from the control panel with a rotating handle. As a result, the abrasive moves along the workpiece not linearly, but in waves. A more complex trajectory allows you to increase the productivity of grinding and extend the resource of the abrasive, but the main thing is to improve the quality of processing of workpieces, in particular, to exclude the appearance of longitudinal scratches due to defects in the "skin", uneven wear or resin adhesion.

Another feature of the machine is the SandSmart feed rate control system. It monitors the amount of load on the main motor and, if it rises to a critical one, reduces the conveyor speed. As soon as the tricky sanding area is passed and the load is reduced, the controller will increase the feed rate to the original set by the operator.

Like all Jet drum grinders, this one has a system that makes it easy to change the abrasive. Firstly, the drum itself is made easily removable. Secondly, the optimal tension of the tape wound on it is set automatically using a special spring mechanism; it also compensates for the stretching of the material during wear.

Additional Information:

• Production Capacity: trading
• Delivery Time: 1 week

• Efficient 3.5A motor makes light work of common sanding applications
• Fits neatly in the palm for single­ handed use
• 2­1/2 inch x 16 inch belt for intricate work
• Comfortable lock­on function
• Quick­release belt lever
• Flush side for sanding up to the edge of the workpiece

Additional Information:

• Item Code: LE71TEC
• Production Capacity: Trading
• Delivery Time: 1 week

Double dowel drilling with 710W motor and 32mm spacing. Simplifies furniture and shelving construction. All-metal mechanism and gearing for long life. 0-90° angle adjustable fence. 0-38mm fast setting of drill depth. Precision rack and pinion mechanism for accurate height adjustment. Clear 3-line viewer enables easy set up with rapid repeat operation. Insulated handle with hex key storage. Includes two 8mm dia drill bits and a heavy duty carry bag.

Features:

• Precision rack and pinion system allows accurate adjustment for material thickness
• Variable setting for drill depth meets precise requirements of each joint
• Double drilling for fast accurate jointing
• 0-90° fence adjustment for a wide range of reliable and accurate angled joints
• Jig teeth for exact drilling of repetitive holes at pre-set sizes
• Clear, calibrated viewer enables precise set-up and drilling
• Front bail handle increases control and grip
• Dust port allows connection to an extraction system for a cleaner, safer working environment
• Trigger on/off switch positioned for easy access

The TRPULs patented triple­blade drum delivers an impressive 46,500 cuts per minute for fast material removal and a superior finish to every project. Traditionally the rebate depth for any planer is restricted by body design, however the TRPUL is designed with the blade drum positioned to the outermost edge, allowing unrestricted depth rebates right to the edge of the workpiece. In addition, the removable blade drum system allows fitment of the sanding drum (both included) to convert the planer into a highly efficient sander. With the high mount position of the motor improving airflow, chip extraction is maximised via the selectable left or right rear dust extraction, ensuring sawdust is directed away from the operator and workpiece at all times.

Features:

• 2­in­1 Planer/Sander with 3­blade drum and interchangeable sanding drum
• 17­position depth control dial for precise material removal
• Low­vibration auxilary handle for added comfort
• Lock­off switch protection from accidental start
• Left or right rear dust extraction
• Tri­blade planing drum for faster, smoother cuts giving a superior finish with improved
• efficiency and faster chip ejection
• Parallel fence provides a guide to help control the planing action

Additional Information:

• Item Code: 837520

Additional Information:

• Item Code: ER305TEBOX
• Production Capacity: Trading
• Delivery Time: 1 week

Powerful 760W biscuit jointer with cast-aluminium base, fence and drive housing. Produces fast, strong joints for furniture and shelving construction. All-metal gearing for long life. 0-90° angle and 0-40mm height adjustable fence. 6-position turret stop for easy biscuit size selection. Compatible with #0, #10, #20 and S6 biscuits. Hinged base for easy blade change and cleaning. Dust port, insulated handles, non-slip pads and removable fence. Includes fitted blade, biscuits, blade pin spanner, hex key, spare carbon brushes and dust bag.

Features:

• 6-position turret stop for easy biscuit size selection
• Precision cast-aluminium construction for durability and long life
• Hinged base provides easy blade change and cleaning
• Creates attractive strong joints to build beautiful long-lasting furniture
• Non-slip pads and removable fence for work pieces of different shapes and sizes
• Dust extraction through blade housing keeps the blade cutting optimally
• Smooth mechanism ensures precision cutting and improved safety
• Insulated handles for operator comfort and safety

Additional Information:

• Item Code: 329697

Award-winning router with compact and powerful 1400W / 2-1/4hp motor and 8000-21,000rpm electronic speed maintenance under load. Quick-fit pins located in base for rapid fitment to mounting plate. Compatible with the Triton RTA300 router table. Easy-set, direct reading 3-stage turret for precise pre-set cut depths. Single dial switch from plunge to fixed-base router with rack and pinion height adjustment.

Features:

• 1/4 inch and 8mm collet for a greater range of bit fitment
• 1400W / 2-1/4hp motor for maintained speed under load
• Automatic spindle lock engages only when power switch cover is closed
• Soft start and variable speed for all cutter types
• Micro winder enables continuous fine depth adjustment through the full plunge range
• Rack and pinion height adjustment and table winder eliminates the need for expensive lifting mechanisms when used with router tables
• Electronic speed control ensures a fine finish on all materials
• Removable plunge spring for easy bit adjustment when table mounted
• 3-stage turret with direct reading scales for precise pre-set cut depths
• Fully enclosed guarding provides maximum protection from the cut zone and assists dust extraction
• Multi-function fence provides optimum control for hand-held use and circle cutting
• Quick-fit pins for fast fitment and removal from the fence and the RTA300 Router Table
• Side air vents reduce intake of dust into the motor casing when mounted upside-down in a router table
• Excellent dust extraction for a cleaner, safer working environment
• Easy access brushes for quick changes
• Through the base single-wrench bit change is achieved with the automatic spindle lock
• Safety switch shutter locks closed in bit-change mode to prevent router being switched on.

• Variable speed control.
• Spindle lock.
• Hex collet nut allows easy cutter changes.
• 43mm diameter collar removable base for carving, die grinding and pillar drill fitment. Tapped fixing holes for Trend standard guide bushes.
• Separate dust spout fixing holes.
• Adjustable twin rod side fence for guiding along a straight edge.

Router Motor JRM-1 for installation in various devices and devices. The structure of the module includes a collector motor equipped with a switch and control electronics, which allows changing the speed of rotation of the equipment in a wide range. Collet clamps with a diameter of 6 mm to ½ inch are mounted on the output shaft. The motor housing is made of metal in the form of a cylinder, the surface of which is used for fastening. The clamp should be made in the form of a round split clamp with an eccentric or a screw for tightening. One of the options for using the JRM-1 is to install it on the table using the JRMLS-1 module (option), equipped with an elevator for lifting and lowering. The table itself can be simple with a cutout for the platform or special with a milling emphasis, T-grooves, its own switch and other special modifications.

Features:

• Electronic speed control
• Electronic inrush current limitation system
• Cylindrical surface of the housing for clamping the motor.

• Heavy-duty cast aluminum base with integrated wear plate & bench mounting holes.
• Quick-release vice with robust square-threaded rod for fast & secure clamping.
• Accurate & durable cast steel vice with 0° - 45° miter capacity & locking pin.
• Compact design with a head lock down pin & carry handle for easy transportation.
• Chip collection tray for a cleaner, safer working environment.
• Ergonomic, ambidextrous trigger with comfortable textured grip.
• Attachable ‘v’ shape block included for secure clamping of round & square tube.
• Easy blade change with integrated tool storage.

Additional Information:

• Item Code: 084-0001
• Production Capacity: Trading
• Delivery Time: 7 days

Powerful 2400W / 3-1/4hp electronically controlled motor. Single spanner above table cutter changing. Automatic shaft lock and power lock-off during cutter change mode. Fast plunge depth adjustment with winder handle and fine depth adjustment with micro winder. Quick switching to conventional plunge mode. Removable plunge spring for easy lifting and adjustment. Effective dust port.

Features:

• 1/2 inch and 12mm collet for a greater range of bit fitment
• 1450W / 3-1/4hp motor provides enough power for even the toughest timbers
• Automatic spindle lock engages only when power switch cover is closed
• Soft start and variable speed provides the perfect speed for all cutter types
• Single button switches from plunge to fixed based router with rack and pinion adjustment
• Micro winder enables continuous fine depth adjustment through the full plunge range
• Rack and pinion height adjustment and table winder eliminates the need for expensive lifting mechanisms when used with router tables
• Electronic speed control ensures a fine finish on all materials
• Removable plunge spring for easy bit adjustment when table mounted
• 3-stage turret with direct reading scales for precise pre-set cut depths
• Fully enclosed guarding provides maximum protection from the cut zone and assists dust extraction
• Multi-function fence provides optimum control for hand-held use and circle cutting
• Quick-fit pins for fast fitment and removal from the fence and RTA300 Router Table
• Side air vents reduce intake of dust into the motor casing when mounted upside-down in a router table
• Excellent dust extraction for a cleaner, safer working environment
• Easy access brushes allows the end user to change worn brushes
• Single wrench bit change through the base is achieved with the automatic spindle lock
• Safety Switch Shutter locks closed in bit-change mode to prevent router being switched on.

• Large 370 x 295mm cast iron table for stability and enhanced material support
• Ideal for sanding contours, arcs, curves and other irregular shapes
• Rotating and oscillating action for increased speed and efficiency and precise finishing of intricate work
• Includes 6 x 80­grit sanding sleeves with matching rubber drums and table inserts
• On­board storage for all accessories
• 38mm Dust port for connection to extraction system

• Powerful 500W motor provides ample power for the most demanding sanding and finishing tasks
• Dual­orbit sanding action with free­run mode for fine sanding and geared fixed orbit mode for fast material removal
• Vacuum dust extraction port increases operator safety and keeps the work area clean
• Features variable speed control and electronic speed maintenance under load
• Controlled delivery of torque and speed
• Auxiliary handle can be adjusted to adapt to the job and to match operator preference
• Vibration­reducing rubber over­moulded grips increase operator safety and comfort
• Includes soft case for convenient storage, 12 x sanding discs with various grit and 2 x spare carbon brushes

Additional Information:

• Production Capacity: trading
• Delivery Time: 1 week

The TPL180 Triple Blade Power Planer features a huge 7 inch width for heavy duty planing of the toughest wood surfaces The powerful 12.5A motor packs twice the power of conventional planers, resulting in precise material removal and a superior finish. The revolutionary 3­blade drum delivers a massive 45,000 cuts­per­minute, improving balance, reducing vibration and blade wear, increasing the speed of cut, and producing a smoother finish. A low centre of gravity design means this large, powerful machine is easy to control, whether on wide or narrow planing surface areas, and the dust extraction port easily connects to a dust extraction system for a cleaner, safer, working environment.

Features:

• Powerful 1500W motor for heavy duty planing of hard woods
• Ultra­wide 7 inch planing width
• Revolutionary 3­blade drum design provides a superior cutting action and smoother finish
• 10 ­Position depth control dial for precise material removal
• Magnesium alloy for superior strength and durability
• Adjustable bail handle provides greater support and control of the tool
• Power­on neon indicates a live power connection.